3D 1T‐MoS2/CoS2 Heterostructure via Interface Engineering for Ultrafast Hydrogen Evolution Reaction

Metallic phase (1T) MoS₂ has been regarded as an appealing material for hydrogen evolution reaction. In this work, a novel interface‐induced strategy is reported to achieve stable and high‐percentage 1T MoS₂ through highly active 1T‐MoS₂/CoS₂ hetero‐nanostructure. Herein, a large number of heterointerfaces can be obtained by interlinked 1T‐MoS₂ and CoS₂ nanosheets in situ grown from the molybdate cobalt oxide nanorod under moderate conditions. Owing to the strong interaction between MoS₂ and CoS₂, high‐percentage of metallic‐phase (1T) MoS₂ of 76.6% can be achieved, leading to high electroconductivity and abundant active sites compared to 2H MoS₂. Furthermore, the interlinked MoS₂ and CoS₂ nanosheets can effectively disperse the nanosheets so as to enlarge the exposed active surface area. The near zero free energy of hydrogen adsorption at the heterointerface can also be achieved, indicating the fast kinetics and excellent catalytic activity induced by heterojunction. Therefore, when applied in hydrogen evolution reaction (HER), 1T‐MoS₂/CoS₂ heterostructure delivers low overpotential of 71 and 26 mV at the current density of 10 mA cm^?2 with low Tafel slops of 60 and 43 mV dec^?1, respectively in alkaline and acidic conditions.     

Aligned Heterointerface‐Induced 1T‐MoS2 Monolayer with Near‐Ideal Gibbs Free for Stable Hydrogen Evolution Reaction

1T‐phase molybdenum disulfide (1T‐MoS₂) exhibits superior hydrogen evolution reaction (HER) over 2H‐phase MoS₂ (2H‐MoS₂). However, its thermodynamic instability is the main drawback impeding its practical application. In this work, a stable 1T‐MoS₂ monolayer formed at edge‐aligned 2H‐MoS₂ and a reduced graphene oxide heterointerface (EA‐2H/1T/RGO) using a precursor‐in‐solvent synthesis strategy are reported. Theoretical prediction indicates that the edge‐aligned layer stacking can induce heterointerfacial charge transfer, which results in a phase transition of the interfacial monolayer from 2H to 1T that realizes thermodynamic stability based on the adhesion energy between MoS₂ and graphene. As an electrocatalyst for HER, EA‐2H/1T/RGO displays an onset potential of ?103 mV versus RHE, a Tafel slope of 46 mV dec^?1 and 10 h stability in acidic electrolyte. The unexpected activity of EA‐2H/1T/RGO beyond 1T‐MoS₂ is due to an inherent defect caused by the gliding of S atoms during the phase transition from 2H to 1T, leading the Gibbs free energy of hydrogen adsorption (ΔG_H*) to decrease from 0.13 to 0.07 eV, which is closest to the ideal value (0.06 eV) of 2H‐MoS₂. The presented work provides fundamental insights into the impressive electrochemical properties of HER and opens new avenues for phase transitions at 2D/2D hybrid interfaces.     

Ruthenium Nanoparticles on Cobalt‐Doped 1T′ Phase MoS2 Nanosheets for Overall Water Splitting

2D MoS₂ nanostructures have recently attracted considerable attention because of their outstanding electrocatalytic properties. The synthesis of unique Co–Ru–MoS₂ hybrid nanosheets with excellent catalytic activity toward overall water splitting in alkaline solution is reported. 1T′ phase MoS₂ nanosheets are doped homogeneously with Co atoms and decorated with Ru nanoparticles. The catalytic performance of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is characterized by low overpotentials of 52 and 308 mV at 10 mA cm^?2 and Tafel slopes of 55 and 50 mV decade^?1 in 1.0 m KOH, respectively. Analysis of X‐ray photoelectron and absorption spectra of the catalysts show that the MoS₂ well retained its metallic 1T′ phase, which guarantees good electrical conductivity during the reaction. The Gibbs free energy calculation for the reaction pathway in alkaline electrolyte confirms that the Ru nanoparticles on the Co‐doped MoS₂ greatly enhance the HER activity. Water adsorption and dissociation take place favorably on the Ru, and the doped Co further catalyzes HER by making the reaction intermediates more favorable. The high OER performance is attributed to the catalytically active RuO₂ nanoparticles that are produced via oxidation of Ru nanoparticles.     

Nickel@Nitrogen‐Doped Carbon@MoS2 Nanosheets: An Efficient Electrocatalyst for Hydrogen Evolution Reaction

Developing cheap, abundant, and easily available electrocatalysts to drive the hydrogen evolution reaction (HER) at small overpotentials is an urgent demand of hydrogen production from water splitting. Molybdenum disulfide (MoS₂) based composites have emerged as competitive electrocatalysts for HER in recent years. Herein, nickel@nitrogen‐doped carbon@MoS₂ nanosheets (Ni@NC@MoS₂) hybrid sub‐microspheres are presented as HER catalyst. MoS₂ nanosheets with expanded interlayer spacings are vertically grown on nickel@nitrogen‐doped carbon (Ni@NC) substrate to form Ni@NC@MoS₂ hierarchical sub‐microspheres by a simple hydrothermal process. The formed Ni@NC@MoS₂ composites display excellent electrocatalytic activity for HER with an onset overpotential of 18 mV, a low overpotential of 82 mV at 10 mA cm^?2, a small Tafel slope of 47.5 mV dec^?1, and high durability in 0.5 H₂SO₄ solution. The outstanding HER performance of the Ni@NC@MoS₂ catalyst can be ascribed to the synergistic effect of dense catalytic sites on MoS₂ nanosheets with exposed edges and expanded interlayer spacings, and the rapid electron transfer from Ni@NC substrate to MoS₂ nanosheets. The excellent Ni@NC@MoS₂ electrocatalyst promises potential application in practical hydrogen production, and the strategy reported here can also be extended to grow MoS₂ on other nitrogen‐doped carbon encapsulated metal species for various applications.     

Superior Hydrogen Evolution Reaction Performance in 2H‐MoS2 to that of 1T Phase

In the hydrogen evolution reaction (HER), energy‐level matching is a prerequisite for excellent electrocatalytic activity. Conventional strategies such as chemical doping and the incorporation of defects underscore the complicated process of controlling the doping species and the defect concentration, which obstructs the understanding of the function of band structure in HER catalysis. Accordingly, 2H‐MoS₂ and 1T‐MoS₂ are used to create electrocatalytic nanodevices to address the function of band structure in HER catalysis. Interestingly, it is found that the 2H‐MoS₂ with modulated Fermi level under the application of a vertical electric field exhibits excellent electrocatalytic activity (as evidenced by an overpotential of 74 mV at 10 mA cm^?2 and a Tafel slope of 99 mV per decade), which is superior to 1T‐MoS₂. This unexpected excellent HER performance is ascribed to the fact that electrons are injected into the conduction band under the condition of back‐gate voltage, which leads to the increased Fermi level of 2H‐MoS₂ and a shorter Debye screen length. Hence, the required energy to drive electrons from the electrocatalyst surface to reactant will decrease, which activates the 2H‐MoS₂ thermodynamically.     

Synergistic Phase and Disorder Engineering in 1T‐MoSe2 Nanosheets for Enhanced Hydrogen‐Evolution Reaction

MoSe₂ is a promising earth‐abundant electrocatalyst for the hydrogen‐evolution reaction (HER), even though it has received much less attention among the layered dichalcogenide (MX₂) materials than MoS₂ so far. Here, a novel hydrothermal‐synthesis strategy is presented to achieve simultaneous and synergistic modulation of crystal phase and disorder in partially crystallized 1T‐MoSe₂ nanosheets to dramatically enhance their HER catalytic activity. Careful structural characterization and defect characterization using positron annihilation lifetime spectroscopy correlated with electrochemical measurements show that the formation of the 1T phase under a large excess of the NaBH₄ reductant during synthesis can effectively improve the intrinsic activity and conductivity, and the disordered structure from a lower reaction temperature can provide abundant unsaturated defects as active sites. Such synergistic effects lead to superior HER catalytic activity with an overpotential of 152 mV versus reversible hydrogen electrode (RHE) for the electrocatalytic current density of j = ?10 mA cm^?2, and a Tafel slope of 52 mV dec^?1. This work paves a new pathway for improving the catalytic activity of MoSe₂ and generally MX₂‐based electrocatalysts via a synergistic modulation strategy.     

Structure Engineering of MoS2 via Simultaneous Oxygen and Phosphorus Incorporation for Improved Hydrogen Evolution

Oxygen and phosphorus dual‐doped MoS₂ nanosheets (O,P‐MoS₂) with porous structure and continuous conductive network are fabricated using a one‐pot NaH₂PO₂‐assisted hydrothermal approach. By simply changing the precursor solution, the chemical composition and resulting structure can be effectively controlled to obtain desired properties toward the hydrogen evolution reaction (HER). Thanks to the beneficial structure and strong synergistic effects between the incorporated oxygen and phosphorus, the optimal O,P‐MoS₂ exhibit superior electrocatalytic performances compared with those of oxygen single‐doped MoS₂ nanosheets (O‐MoS₂). Specifically, a low HER onset overpotential of 150 mV with a small Tafel slope of 53 mV dec^?1, excellent conductivity, and long‐term durability are achieved by the structural engineering of MoS₂ via O and P co‐doping, making it an efficient HER electrocatalyst for water electrocatalysis. This work provides an alternative strategy to manipulate transition metal dichalcogenides as advanced materials for electrocatalytic and related energy applications.     

Phase Modulation of (1T‐2H)‐MoSe2/TiC‐C Shell/Core Arrays via Nitrogen Doping for Highly Efficient Hydrogen Evolution Reaction

Tailoring molybdenum selenide electrocatalysts with tunable phase and morphology is of great importance for advancement of hydrogen evolution reaction (HER). In this work, phase‐ and morphology‐modulated N‐doped MoSe₂/TiC‐C shell/core arrays through a facile hydrothermal and postannealing treatment strategy are reported. Highly conductive TiC‐C nanorod arrays serve as the backbone for MoSe₂ nanosheets to form high‐quality MoSe₂/TiC‐C shell/core arrays. Impressively, continuous phase modulation of MoSe₂ is realized on the MoSe₂/TiC‐C arrays. Except for the pure 1T‐MoSe₂ and 2H‐MoSe₂, mixed (1T‐2H)‐MoSe₂ nanosheets are achieved in the N‐MoSe₂ by N doping and demonstrated by spherical aberration electron microscope. Plausible mechanism of phase transformation and different doping sites of N atom are proposed via theoretical calculation. The much smaller energy barrier, longer H? Se bond length, and diminished bandgap endow N‐MoSe₂/TiC‐C arrays with substantially superior HER performance compared to 1T and 2H phase counterparts. Impressively, the designed N‐MoSe₂/TiC‐C arrays exhibit a low overpotential of 137 mV at a large current density of 100 mA cm^?2, and a small Tafel slope of 32 mV dec^?1. Our results pave the way to unravel the enhancement mechanism of HER on 2D transition metal dichalcogenides by N doping.     

Engineering 2D Metal–Organic Framework/MoS2 Interface for Enhanced Alkaline Hydrogen Evolution

2D metal–organic frameworks (MOFs) have been widely investigated for electrocatalysis because of their unique characteristics such as large specific surface area, tunable structures, and enhanced conductivity. However, most of the works are focused on oxygen evolution reaction. There are very limited numbers of reports on MOFs for hydrogen evolution reaction (HER), and generally these reported MOFs suffer from unsatisfactory HER activities. In this contribution, novel 2D Co‐BDC/MoS₂ (BDC stands for 1,4‐benzenedicarboxylate, C₈H₄O₄) hybrid nanosheets are synthesized via a facile sonication‐assisted solution strategy. The introduction of Co‐BDC induces a partial phase transfer from semiconducting 2H‐MoS₂ to metallic 1T‐MoS₂. Compared with 2H‐MoS₂, 1T‐MoS₂ can activate the inert basal plane to provide more catalytic active sites, which contributes significantly to improving HER activity. The well‐designed Co‐BDC/MoS₂ interface is vital for alkaline HER, as Co‐BDC makes it possible to speed up the sluggish water dissociation (rate‐limiting step for alkaline HER), and modified MoS₂ is favorable for the subsequent hydrogen generation step. As expected, the resultant 2D Co‐BDC/MoS₂ hybrid nanosheets demonstrate remarkable catalytic activity and good stability toward alkaline HER, outperforming those of bare Co‐BDC, MoS₂, and almost all the previously reported MOF‐based electrocatalysts.     

Efficient Hydrogen Evolution Reaction Catalysis in Alkaline Media by All‐in‐One MoS2 with Multifunctional Active Sites

MoS₂ becomes an efficient and durable nonprecious‐metal electrocatalyst for the hydrogen evolution reaction (HER) when it contains multifunctional active sites for water splitting derived from 1T‐phase, defects, S vacancies, exposed Mo edges with expanded interlayer spacings. In contrast to previously reported MoS₂‐based catalysts targeting only a single or few of these characteristics, the all‐in‐one MoS₂ catalyst prepared herein features all of the above active site types. During synthesis, the intercalation of in situ generated NH₃ molecules into MoS₂ sheets affords ammoniated MoS₂ (A‐MoS₂) that predominantly comprises 1T‐MoS₂ and exhibits an expanded interlayer spacing. The subsequent reduction of A‐MoS₂ results in the removal of intercalated NH₃ and H₂S to form an all‐in‐one MoS₂ with multifunctional active sites mentioned above (R‐MoS₂) that exhibits electrocatalytic HER performance in alkaline media superior to those of all previously reported MoS₂‐based electrocatalysts. In particular, a hybrid MoS₂/nickel foam catalyst outperforms commercial Pt/C in the practically meaningful high‐current region (>25 mA cm^?2), demonstrating that R‐MoS₂‐based materials can potentially replace Pt catalysts in practical alkaline HER systems.     

Unveiling Active Sites for the Hydrogen Evolution Reaction on Monolayer MoS2

Here, the hydrogen evolution reaction (HER) activities at the edge and basal‐plane sites of monolayer molybdenum disulfide (MoS₂) synthesized by chemical vapor deposition (CVD) are studied using a local probe method enabled by selected‐area lithography. Reaction windows are opened by e‐beam lithography at sites of interest on poly(methyl methacrylate) (PMMA)‐covered monolayer MoS₂ triangles. The HER properties of MoS₂ edge sites are obtained by subtraction of the activity of the basal‐plane sites from results containing both basal‐plane and edge sites. The catalytic performances in terms of turnover frequencies (TOFs) are calculated based on the estimated number of active sites on the selected areas. The TOFs follow a descending order of 3.8 ± 1.6, 1.6 ± 1.2, 0.008 ± 0.002, and 1.9 ± 0.8 × 10^?4 s^?1, found for 1T′‐, 2H‐MoS₂ edges, and 1T′‐, 2H‐MoS₂ basal planes, respectively. Edge sites of both 2H‐ and 1T′‐MoS₂ are proved to have comparable activities to platinum (≈1–10 s^?1). When fitted into the HER volcano plot, the MoS₂ active sites follow a trend distinct from conventional metals, implying a possible difference in the reaction mechanism between transition‐metal dichalcogenides (TMDs) and metal catalysts.     

Preparation of High‐Percentage 1T‐Phase Transition Metal Dichalcogenide Nanodots for Electrochemical Hydrogen Evolution

Nanostructured transition metal dichalcogenides (TMDs) are proven to be efficient and robust earth‐abundant electrocatalysts to potentially replace precious platinum‐based catalysts for the hydrogen evolution reaction (HER). However, the catalytic efficiency of reported TMD catalysts is still limited by their low‐density active sites, low conductivity, and/or uncleaned surface. Herein, a general and facile method is reported for high‐yield, large‐scale production of water‐dispersed, ultrasmall‐sized, high‐percentage 1T‐phase, single‐layer TMD nanodots with high‐density active edge sites and clean surface, including MoS₂, WS₂, MoSe₂, Mo_0.5W_0.5S₂, and MoSSe, which exhibit much enhanced electrochemical HER performances as compared to their corresponding nanosheets. Impressively, the obtained MoSSe nanodots achieve a low overpotential of ?140 mV at current density of 10 mA cm^?2, a Tafel slope of 40 mV dec^?1, and excellent long‐term durability. The experimental and theoretical results suggest that the excellent catalytic activity of MoSSe nanodots is attributed to the high‐density active edge sites, high‐percentage metallic 1T phase, alloying effect and basal‐plane Se‐vacancy. This work provides a universal and effective way toward the synthesis of TMD nanostructures with abundant active sites for electrocatalysis, which can also be used for other applications such as batteries, sensors, and bioimaging.     

Coupling Interface Constructions of MoS2/Fe5Ni4S8 Heterostructures for Efficient Electrochemical Water Splitting

Water splitting is considered as a pollution‐free and efficient solution to produce hydrogen energy. Low‐cost and efficient electrocatalysts for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) are needed. Recently, chemical vapor deposition is used as an effective approach to gain high‐quality MoS₂ nanosheets (NSs), which possess excellent performance for water splitting comparable to platinum. Herein, MoS₂ NSs grown vertically on FeNi substrates are obtained with in situ growth of Fe₅Ni₄S₈ (FNS) at the interface during the synthesis of MoS₂. The synthesized MoS₂/FNS/FeNi foam exhibits only 120 mV at 10 mA cm^?2 for HER and exceptionally low overpotential of 204 mV to attain the same current density for OER. Density functional theory calculations further reveal that the constructed coupling interface between MoS₂ and FNS facilitates the absorption of H atoms and OH groups, consequently enhancing the performances of HER and OER. Such impressive performances herald that the unique structure provides an approach for designing advanced electrocatalysts.     

Glucose‐Induced Synthesis of 1T‐MoS2/C Hybrid for High‐Rate Lithium‐Ion Batteries

1T phase MoS₂ possesses higher conductivity than the 2H phase, which is a key parameter of electrochemical performance for lithium ion batteries (LIBs). Herein, a 1T‐MoS₂/C hybrid is successfully synthesized through facile hydrothermal method with a proper glucose additive. The synthesized hybrid material is composed of smaller and fewer‐layer 1T‐MoS₂ nanosheets covered by thin carbon layers with an enlarged interlayer spacing of 0.94 nm. When it is used as an anode material for LIBs, the enlarged interlayer spacing facilitates rapid intercalating and deintercalating of lithium ions and accommodates volume change during cycling. The high intrinsic conductivity of 1T‐MoS₂ also contributes to a faster transfer of lithium ions and electrons. Moreover, much smaller and fewer‐layer nanosheets can shorten the diffusion path of lithium ions and accelerate reaction kinetics, leading to an improved electrochemical performance. It delivers a high initial capacity of 920.6 mAh g^?1 at 1 A g^?1 and the capacity can maintain 870 mAh g^?1 even after 300 cycles, showing a superior cycling stability. The electrode presents a high rate performance as well with a reversible capacity of 600 mAh g^?1 at 10 A g^?1. These results show that the 1T‐MoS₂/C hybrid shows potential for use in high‐performance lithium‐ion batteries.     

Interface Modulation of MoS2/Metal Oxide Heterostructures for Efficient Hydrogen Evolution Electrocatalysis

Developing efficient earth‐abundant MoS₂ based hydrogen evolution reaction (HER) electrocatalysts is important but challenging due to the sluggish kinetics in alkaline media. Herein, a strategy to fabricate a high‐performance MoS₂ based HER electrocatalyst by modulating interface electronic structure via metal oxides is developed. All the heterostructure catalysts present significant improvement of HER electrocatalytic activities, demonstrating a positive role of metal oxides decoration in promoting the rate‐limited water dissociation step for the HER mechanism in alkaline media. The as‐obtained MoS₂/Ni₂O₃H catalyst exhibits a low overpotential of 84 mV at 10 mA cm^?2 and small charge‐transfer resistance of 1.5 Ω in 1 m KOH solution. The current density (217 mA cm^?2) at the overpotential of 200 mV is about 2 and 24 times higher than that of commercial Pt/C and bare MoS₂, respectively. Additionally, these MoS₂/metal oxides heterostructure catalysts show outstanding long‐term stability under a harsh chronopotentiometry test. Theoretical calculations reveal the varied sensitivity of 3d‐band in different transition oxides, in which Ni‐3d of Ni₂O₃H is evidently activated to achieve fast electron transfer for HER as the electron‐depletion center. Both electronic properties and energetic reaction trends confirm the high electroactivity of MoS₂/Ni₂O₃H in the adsorption and dissociation of H₂O for highly efficient HER in alkaline media.     

Hierarchical Nanorods of MoS2/MoP Heterojunction for Efficient Electrocatalytic Hydrogen Evolution Reaction

Hierarchical nanostructures with tailored component and architectures are attractive for energy‐related applications. Here, the delicate design and construction of hierarchical MoS₂/MoP (H‐MoS₂/MoP) nanorods for the hydrogen evolution reaction (HER) are demonstrated. This multiscale design rationally combines the compositional and structural advantages of MoS₂/MoP heterojunction into a hierarchical architecture, which can modulate electronic structure of S, remarkably facilitating the electrocatalytic HER. Benefitting from their unique architecture and electronic structure, the H‐MoS₂/MoP nanorods exhibit excellent performance for HER with ultralow overpotential of 92 mV at current density of 10 mA cm^?2 in 1 m KOH and high stability. This work not only provides an efficient approach to constructing hierarchical heterojunctions, but also a multiscale strategy for all‐round regulation of the electronic structure and hierarchical morphology of nanomaterials for energy‐related applications.     

Unveiling the Interfacial Effects for Enhanced Hydrogen Evolution Reaction on MoS2/WTe2 Hybrid Structures

Using the MoS₂‐WTe₂ heterostructure as a model system combined with electrochemical microreactors and density function theory calculations, it is shown that heterostructured contacts enhance the hydrogen evolution reaction (HER) activity of monolayer MoS₂. Two possible mechanisms are suggested to explain this enhancement: efficient charge injection through large‐area heterojunctions between MoS₂ and WTe₂ and effective screening of mirror charges due to the semimetallic nature of WTe₂. The dielectric screening effect is proven minor, probed by measuring the HER activity of monolayer MoS₂ on various support substrates with dielectric constants ranging from 4 to 300. Thus, the enhanced HER is attributed to the increased charge injection into MoS₂ through large‐area heterojunctions. Based on this understanding, a MoS₂/WTe₂ hybrid catalyst is fabricated with an HER overpotential of ?140 mV at 10 mA cm^?2, a Tafel slope of 40 mV dec^?1, and long stability. These results demonstrate the importance of interfacial design in transition metal dichalcogenide HER catalysts. The microreactor platform presents an unambiguous approach to probe interfacial effects in various electrocatalytic reactions.     

Dual‐Native Vacancy Activated Basal Plane and Conductivity of MoSe2 with High‐Efficiency Hydrogen Evolution Reaction

Although transition metal dichalcogenide MoSe₂ is recognized as one of the low‐cost and efficient electrocatalysts for the hydrogen evolution reaction (HER), its thermodynamically stable basal plane and semiconducting property still hamper the electrocatalytic activity. Here, it is demonstrated that the basal plane and edges of 2H‐MoSe₂ toward HER can be activated by introducing dual‐native vacancy. The first‐principle calculations indicate that both the Se and Mo vacancies together activate the electrocatalytic sites in the basal plane and edges of MoSe₂ with the optimal hydrogen adsorption free energy (ΔG_H*) of 0 eV. Experimentally, 2D MoSe₂ nanosheet arrays with a large amount of dual‐native vacancies are fabricated as a catalytic working electrode, which possesses an overpotential of 126 mV at a current density of 100 mV cm^?2, a Tafel slope of 38 mV dec^?1, and an excellent long‐term durability. The findings pave a rational pathway to trigger the activity of inert MoSe₂ toward HER and also can be extended to other layered dichalcogenide.     

Structural Phase Transition Effect on Resistive Switching Behavior of MoS2‐Polyvinylpyrrolidone Nanocomposites Films for Flexible Memory Devices

The 2H phase and 1T phase coexisting in the same molybdenum disulfide (MoS₂) nanosheets can influence the electronic properties of the materials. The 1T phase of MoS₂ is introduced into the 2H‐MoS₂ nanosheets by two‐step hydrothermal synthetic methods. Two types of nonvolatile memory effects, namely write‐once read‐many times memory and rewritable memory effect, are observed in the flexible memory devices with the configuration of Al/1T@2H‐MoS₂‐polyvinylpyrrolidone (PVP)/indium tin oxide (ITO)/polyethylene terephthalate (PET) and Al/2H‐MoS₂‐PVP/ITO/PET, respectively. It is observed that structural phase transition in MoS₂ nanosheets plays an important role on the resistive switching behaviors of the MoS₂‐based device. It is hoped that our results can offer a general route for the preparation of various promising nanocomposites based on 2D nanosheets of layered transition metal dichalcogenides for fabricating the high performance and flexible nonvolatile memory devices through regulating the phase structure in the 2D nanosheets.     

Amorphous Molybdenum Sulfide/Carbon Nanotubes Hybrid Nanospheres Prepared by Ultrasonic Spray Pyrolysis for Electrocatalytic Hydrogen Evolution

Developing cost‐effective electrocatalysts with high activity and stability for hydrogen evolution reaction (HER) plays an important role in modern hydrogen economy. Amorphous molybdenum sulfide (MoS_x ) has recently emerged as one of the most promising alternatives to Pt‐based catalysts in HER, especially in acidic electrolytes. Here this study reports a simple ultrasonic spray pyrolysis method to synthesize hybrid HER catalysts composed of MoS_x firmly attached on entangled carbon nanotube nanospheres (MoS_x /CNTs). This synthetic process is fast, continuous, highly durable, and amenable to high‐volume production with high yields and exceptional quality. The MoS_x /CNTs hybrid catalyst prepared at 300 °C exhibits a low overpotential of 168 mV at the current density of 10 mA cm^?2 with a small Tafel slope of 36 mV dec^?1. Electrochemical measurements and X‐ray photoelectron spectroscopy analyses reveal that the CNT network not only promotes the charge transfer in corresponding HER process but also enhances the stability of the active sites in MoS_x . This work demonstrates that ultrasonic spray pyrolysis is a reliable and versatile approach for synthesizing amorphous MoS_x‐based HER catalysts.