Sequential Coalescence Enabled Two‐Step Microreactions in Triple‐Core Double‐Emulsion Droplets Triggered by an Electric Field

Advances in microfluidic emulsification have enabled the generation of exquisite multiple‐core droplets, which are promising structures to accommodate microreactions. An essential requirement for conducting reactions is the sequential coalescence of the multiple cores encapsulated within these droplets, therefore, mixing the reagents together in a controlled sequence. Here, a microfluidic approach is reported for the conduction of two‐step microreactions by electrically fusing three cores inside double‐emulsion droplets. Using a microcapillary glass device, monodisperse water‐in‐oil‐in‐water droplets are fabricated with three compartmented reagents encapsulated inside. An AC electric field is then applied through a polydimethylsiloxane chip to trigger the sequential mixing of the reagents, where the precise sequence is guaranteed by the discrepancy of the volume or conductivity of the inner cores. A two‐step reaction in each droplet is ensured by two times of core coalescence, which totally takes 20–40 s depending on varying conditions. The optimal parameters of the AC signal for the sequential fusion of the inner droplets are identified. Moreover, the capability of this technique is demonstrated by conducting an enzyme‐catalyzed reaction used for glucose detection with the double‐emulsion droplets. This technique should benefit a wide range of applications that require multistep reactions in micrometer scale.     

Generation of High‐Order All‐Aqueous Emulsion Drops by Osmosis‐Driven Phase Separation

Droplets containing ternary mixtures can spontaneously phase‐separate into high‐order structures upon a change in composition, which provides an alternative strategy to form multiphase droplets. However, existing strategies always involve nonaqueous solvents that limit the potential applications of the resulting multiple droplets, such as encapsulation of biomolecules. Here, a robust approach to achieve high‐order emulsion drops with an all‐aqueous nature from two aqueous phases by osmosis‐induced phase separation on a microfluidic platform is presented. This technique is enabled by the existence of an interface of the two aqueous phases and phase separation caused by an osmolality difference between the two phases. The complexity of emulsion drops induced by phase separation could be controlled by varying the initial concentration of solutes and is systematically illustrated in a state diagram. In particular, this technique is utilized to successfully achieve high‐order all‐aqueous droplets in a different aqueous two‐phase system. The proposed method is simple since it only requires two initial aqueous solutions for generating multilayered, organic‐solvent‐free all‐aqueous emulsion drops, and thus these multiphase emulsion drops can be further tailored to serve as highly biocompatible material templates.     

Guest Encapsulation within Surface‐Adsorbed Self‐Assembled Cages

Coordination cages encapsulate a wide variety of guests in the solution state. This ability renders them useful for applications such as catalysis and the sequestration of precious materials. A simple and general method for the immobilization of coordination cages on alumina is reported. Cage loadings are quantified via adsorption isotherms and guest displacement assays demonstrate that the adsorbed cages retain the ability to encapsulate and separate guest and non‐guest molecules. Finally, a system of two cages, adsorbed on to different regions of alumina, stabilizes and separates a pair of Diels–Alder reagents. The addition of a single competitive guest results in the controlled release of the reagents, thus triggering their reaction. This method of coordination cage immobilization on solid phases is envisaged to be applicable to the extensive library of reported cages, enabling new applications based upon selective solid‐phase molecular encapsulation.     

Multifunctional Yolk‐in‐Shell Nanoparticles for pH‐triggered Drug Release and Imaging

Multifunctional nanoparticles are synthesized for both pH‐triggered drug release and imaging with radioluminescence, upconversion luminescent, and magnetic resonance imaging (MRI). The particles have a yolk‐in‐shell morphology, with a radioluminescent core, an upconverting shell, and a hollow region between the core and shell for loading drugs. They are synthesized by controlled encapsulation of a radioluminescent nanophosphor yolk in a silica shell, partial etching of the yolk in acid, and encapsulation of the silica with an upconverting luminescent shell. Metroxantrone, a chemotherapy drug, was loaded into the hollow space between X‐ray phosphor yolk and up‐conversion phosphor shell through pores in the shell. To encapsulate the drug and control the release rate, the nanoparticles are coated with pH‐responsive biocompatible polyelectrolyte layers of charged hyaluronic acid sodium salt and chitosan. The nanophosphors display bright luminescence under X‐ray, blue light (480 nm), and near infrared light (980 nm). They also served as T₁ and T₂ MRI contrast agents with relaxivities of 3.5 mM^?1 s^?1 (r₁) and 64 mM^?1s^?1 (r₂). These multifunctional nanocapsules have applications in controlled drug delivery and multimodal imaging.     

Multi‐Drug‐Loaded Microcapsules with Controlled Release for Management of Parkinson's Disease

Parkinson's disease (PD) is a progressive disease of the nervous system, and is currently managed through commercial tablets that do not sufficiently enable controlled, sustained release capabilities. It is hypothesized that a drug delivery system that provides controlled and sustained release of PD drugs would afford better management of PD. Hollow microcapsules composed of poly‐l ‐lactide (PLLA) and poly (caprolactone) (PCL) are prepared through a modified double‐emulsion technique. They are loaded with three PD drugs, i.e., levodopa (LD), carbidopa (CD), and entacapone (ENT), at a ratio of 4:1:8, similar to commercial PD tablets. LD and CD are localized in both the hollow cavity and PLLA/PCL shell, while ENT is localized in the PLLA/PCL shell. Release kinetics of hydrophobic ENT is observed to be relatively slow as compared to the other hydrophilic drugs. It is further hypothesized that encapsulating ENT into PCL as a surface coating onto these microcapsules can aid in accelerating its release. Now, these spray‐coated hollow microcapsules exhibit similar release kinetics, according to Higuchi's rate, for all three drugs. The results suggest that multiple drug encapsulation of LD, CD, and ENT in gastric floating microcapsules could be further developed for in vivo evaluation for the management of PD.     

Synergistical Coupling Interconnected ZnS/SnS2 Nanoboxes with Polypyrrole‐Derived N/S Dual‐Doped Carbon for Boosting High‐Performance Sodium Storage

Metal sulfides possess tremendous potentials owing to their high specific capacity for sodium storage. However, the huge volume expansion, accompanied with structural collapse and unsatisfied electric conductivity upon continuous cycling, always lead to inferior rate capability and severe cycling fading. In this work, binary metal sulfide (ZnS/SnS₂) nanoboxes confined in N/S dual‐doped carbon shell (ZSS@NSC) are fabricated through a facile co‐precipitation method involving the wrapping of polypyrrole, and subsequent in situ sulfidation process. Such a well‐designed heterogeneity between ZnS and SnS₂ provides rapid Na⁺ insertion and enhanced charge transport by creating an electric field at the heterointerface. More significantly, the formation of polypyrrole‐derived N/S dual‐doped carbon is synergistically coupled with the ZnS/SnS₂ to create a unique and robust architecture, further strengthening the interconnect function at the heterointerface, which improves electric/ion transfer and mitigates the volume variation during the long‐term cycling process. Herein, this as‐prepared ZSS@NSC exhibits satisfied specific capacity, excellent rate property, and superior cyclic stability (a reversible capacity of 456.2 mAh g^?1 with excellent capacity retention of 97.2% after 700 stable cycles at ultrahigh rate of 5 A g^?1). The boosted Na‐storage properties demonstrate that the optimized strategy of structure‐engineering has a broad prospect to promote energy storage applications.     

Superamphiphobic Bionic Proboscis for Contamination‐Free Manipulation of Nano and Core–Shell Droplets

Manipulation of nanoliter droplets is a key step for many emerging technologies including ultracompact microfluidics devices, 3D and flexible electronic printing. Despite progress, contamination‐free generation and release of nanoliter droplets by compact low‐cost devices remains elusive. In the present study, inspired by butterflies' minute manipulation of fluids, the authors have engineered a superamphiphobic bionic proboscis (SAP) layout that surpasses synthetic and natural designs. The authors demonstrate the scalable fabrication of SAPs with tunable inner diameters down to 50 µ m by the rapid gas‐phase nanotexturing of the outer and inner surfaces of readily available hypodermic needles. Optimized SAPs achieve contamination‐free manipulation of water and oil droplets down to a liquid surface tension of 26.56 mN m^?1 and a volume of 10 nL. The unique potential of this layout is showcased by the rapid and carefully controlled in‐air synthesis of core‐shell droplets with well‐controlled compositions. These findings provide a new low‐cost tool for high‐precision manipulation of nanoliter droplets, offering a powerful alternative to established thermal‐ and electrodynamic‐based devices.     

Strawberry‐like Core–Shell Ag@Polydopamine@BaTiO3 Hybrid Nanoparticles for High‐k Polymer Nanocomposites with High Energy Density and Low Dielectric Loss

Flexible nanocomposites comprising of polymer and high‐dielectric‐constant (high‐k) ceramic nanoparticles are becoming increasingly attractive for dielectric and energy storage applications in modern electronic and electric industry. However, a huge challenge still remains. Namely, the increase of dielectric constant usually at the cost of significant decrease of breakdown strength of the nanocomposites because of the electric field distortion and concentration induced by the high‐k filler. To address this long‐standing problem, by using nano‐Ag decorated core–shell polydopamine (PDA) coated BaTiO₃ (BT) hybrid nanoparticles, a new strategy is developed to prepare high‐k polymer nanocomposites with high breakdown strength. The strawberry‐like BT‐PDA‐Ag based ferroelectric polymer [i.e., poly(vinylideneflyoride‐co‐hexafluroro propylene), P(VDF‐HFP)] nanocomposites exhibit greatly enhanced energy density and significantly suppressed dielectric loss as well as leakage current density in comparison with the nanocomposites with the core–shell structured BT‐PDA. Coulomb‐blockade effect of super‐small nano‐Ag is used to explain the observed performance enhancement of the nanocomposites. The simplicity and scalability of the described approach provide a promising route to polymer nanocomposites for dielectric and energy storage applications.     

Plasmonic Heterodimers with Binding Site‐Dependent Hot Spot for Surface‐Enhanced Raman Scattering

A novel plasmonic heterodimer nanostructure with a controllable self‐assembled hot spot is fabricated by the conjugation of individual Au@Ag core–shell nanocubes (Au@Ag NCs) and varisized gold nanospheres (GNSs) via the biotin–streptavidin interaction from the ensemble to the single‐assembly level. Due to their featured configurations, three types of heterogeneous nanostructures referred to as Vertice, Vicinity, and Middle are proposed and a single hot spot forms between the nanocube and nanosphere, which exhibits distinct diversity in surface plasmon resonance effect. Herein, the calculated surface‐enhanced Raman scattering enhancement factors of the three types of heterodimers show a narrow distribution and can be tuned in orders of magnitude by controlling the size of GNSs onto individual Au@Ag NCs. Particularly, the Vertice heterodimer with unique configuration can provide extraordinary enhancement of the electric field for the single hot spot region due to the collaborative interaction of lightning rod effect and interparticle plasmon coupling effect. This established relationship between the architecture and the corresponding optical properties of the heterodimers provides the basis for creating controllable platforms which can be exploited in the applications of plasmonic devices, electronics, and biodetection.     

Inside Front Cover: Efficient Top‐Gate,Ambipolar, Light‐Emitting Field‐Effect Transistors Based on a Green‐Light‐Emitting Polyfluorene (Adv. Mater. 20/2006)

The inside cover shows light emission from within the channel of an ambipolar field‐effect transistor based on the green‐light‐emitting conjugated polymer F8BT in a bottom contact/top gate structure, as reported by Sirringhaus and co‐workers on p. 2708. It visually demonstrates the formation of separate electron and hole accumulation layers in ambipolar transistors and radiative recombination of charge carriers where the two layers meet (schematic), which is controlled by the applied voltages.     

pH‐Regulated Heterostructure Porous Particles Enable Similarly Sized Protein Separation

Porous particles are frequently used for various healthcare applications that involve protein separation processes. However, conventional porous particles, either homogeneous particles or those subjected to surface modification with a layer of specific molecules, often encounter bottlenecks in separating proteins with similar size. Here, it is reported that heterostructure‐enabled separation particles (HESP), synthesized by a double emulsion interfacial polymerization process, can effectively and rapidly separate similarly sized proteins. Double emulsion interfacial polymerization endows the HESP with a nanoscale carboxylic layer outside the particles and inside the pores, allowing pH‐regulated selective adsorption of proteins. Thus, by optimizing the environmental pH, proteins with similar size can be effectively and rapidly separated. These HESP are expected to show potential in widespread applications ranging from biomolecule adsorption, encapsulation, and separation to controlled release and other biomedical fields.     

Broadband,Spectrally Flat,Graphene‐based Terahertz Modulators

Advances in the efficient manipulation of terahertz waves are crucial for the further development of terahertz technology, promising applications in many diverse areas, such as biotechnology and spectroscopy, to name just a few. Due to its exceptional electronic and optical properties, graphene is a good candidate for terahertz electro‐absorption modulators. However, graphene‐based modulators demonstrated to date are limited in bandwidth due to Fabry–Perot oscillations in the modulators’ substrate. Here, a novel method is demonstrated to design electrically controlled graphene‐based modulators that can achieve broadband and spectrally flat modulation of terahertz beams. In our design, a graphene layer is sandwiched between a dielectric and a slightly doped substrate on a metal reflector. It is shown that the spectral dependence of the electric field intensity at the graphene layer can be dramatically modified by optimizing the structural parameters of the device. In this way, the electric field intensity can be spectrally flat and even compensate for the dispersion of the graphene conductivity, resulting in almost invariant absorption in a wide frequency range. Modulation depths up to 76% can be achieved within a fractional operational bandwidth of over 55%. It is expected that our modulator designs will enable the use of terahertz technology in applications requiring broadband operation.     

Active Encapsulation in Biocompatible Nanocapsules

Co‐precipitation is generally refers to the co‐precipitation of two solids and is widely used to prepare active‐loaded nanoparticles. Here, it is demonstrated that liquid and solid can precipitate simultaneously to produce hierarchical core–shell nanocapsules that encapsulate an oil core in a polymer shell. During the co‐precipitation process, the polymer preferentially deposits at the oil/water interface, wetting both the oil and water phases; the behavior is determined by the spreading coefficients and driven by the energy minimization. The technique is applicable to directly encapsulate various oil actives and avoid the use of toxic solvent or surfactant during the preparation process. The obtained core–shell nanocapsules harness the advantage of biocompatibility, precise control over the shell thickness, high loading capacity, high encapsulation efficiency, good dispersity in water, and improved stability against oxidation. The applications of the nanocapsules as delivery vehicles are demonstrated by the excellent performances of natural colorant and anti‐cancer drug‐loaded nanocapsules. The core–shell nanocapsules with a controlled hierarchical structure are, therefore, ideal carriers for practical applications in food, cosmetics, and drug delivery.     

Selective CO2 Capture and High Proton Conductivity of a Functional Star‐of‐David Catenane Metal–Organic Framework

Network structures based on Star‐of‐David catenanes with multiple superior functionalities have been so far elusive, although numerous topologically interesting networks are synthesized. Here, a metal–organic framework featuring fused Star‐of‐David catenanes is reported. Two triangular metallacycles with opposite handedness are triply intertwined forming a Star‐of‐David catenane. Each catenane fuses with its six neighbors to generate a porous twofold intercatenated gyroid framework. The compound possesses exceptional stability and exhibits multiple functionalities including highly selective CO₂ capture, high proton conductivity, and coexistence of slow magnetic relaxation and long‐range ordering.     

Efficient Cisplatin Pro‐Drug Delivery Visualized with Sub‐100 nm Resolution: Interfacing Engineered Thermosensitive Magnetomicelles with a Living System

Temperature‐responsive magnetic nanomicelles can serve as thermal energy and cargo carriers with controlled drug release functionality. In view of their potential biomedical applications, understanding the modes of interaction between nanomaterials and living systems and evaluation of efficiency of cargo delivery is of the utmost importance. In this work, we investigate the interaction between the hybrid magnetic nanomicelles engineered for controlled platinum complex drug delivery and a biological system at three fundamental levels: subcellular compartments, a single cell and whole living animal. Nanomicelles with polymeric P(NIPAAm‐co‐AAm)‐b‐PCL core‐shell were loaded with a hydrophobic Pt(IV) complex and Fe₃O₄ nanoparticles though self‐assembly. The distribution of a platinum complex on subcellular level is visualized using hard X‐ray fluorescence microscopy with unprecedented level of detail at sub‐100 nm spatial resolution. We then study the cytotoxic effects of platinum complex‐loaded micelles in vitro on a head and neck cancer cell culture model SQ20B. Finally, by employing the magnetic functionality of the micelles and additionally loading them with a near infrared fluorescent dye, we magnetically target them to a tumor site in a live animal xenografted model which allows to visualize their biodistribution in vivo.     

Coupled mechanics and finite element for non‐linear laminated piezoelectric shallow shells undergoing large displacements and rotations

A theoretical framework is presented for analysing the coupled non‐linear response of shallow doubly curved adaptive laminated piezoelectric shells undergoing large displacements and rotations. The formulated mechanics incorporate coupling between in‐plane and flexural stiffness terms due to geometric curvature, coupling between mechanical and electric fields, and encompass geometric non‐linearity effects due to large displacements and rotations. The governing equations are formulated explicitly in orthogonal curvilinear co‐ordinates and are combined with the kinematic assumptions of a mixed‐field shear‐layerwise shell laminate theory. Based on the above formulation, a finite element methodology together with an incremental‐iterative technique, based on Newton–Raphson method is formulated. An eight‐node coupled non‐linear shell element is also developed. Various evaluation cases on laminated curved beams and cylindrical panels illustrate the capability of the shell finite element to predict the complex non‐linear behaviour of active shell structures including buckling, which is not captured by linear shell models. The numerical results also show the inherent capability of piezoelectric shell structures to actively induce large displacements through piezoelectric actuators, by jumping between multiple equilibrium states. Copyright © 2005 John Wiley & Sons, Ltd.     

“Smart” Surface Capsules for Delivery Devices

This review describes emerging trends, basic principles, applications, and future challenges for designing next generation responsive “smart” surface capsules. Advances and importance of “surface” capsules which are not deposited onto the surface but are built into the surface are highlighted for selective applications with specific examples of surface sponge structures formed by high intensity ultrasonic surface treatment (HIUS). Surface capsules can be adapted for biomedical applications, membrane materials, lab‐on‐chip, organ‐on‐chip, and for template synthesis. They provide attractive self‐healing anticorrosion and antifouling prospects. Nowadays delivery systems are built from inorganic, organic, hybrid, biological materials to deliver various drugs from low molecular weight substances to large protein molecules and even live cells. It is important that capsules are designed to have time prolonged release features. Available stimuli to control capsule opening are physical, chemical and biological ones. Understanding the underlying mechanisms of capsule opening by different stimuli is essential for developing new methods of encapsulation, release, and targeting. Development of “smart” surface capsules is preferable to respond to multiple stimuli. More and more often a new generation of “smart” capsules is designed by a bio‐inspired approach.     

Spontaneous Structuration in Coacervate‐Based Protocells by Polyoxometalate‐Mediated Membrane Assembly

Molecularly crowded, polyelectrolyte/ribonucleotide‐enriched membrane‐free coacervate droplets are transformed into membrane‐bounded sub‐divided vesicles by using a polyoxometalate‐mediated surface‐templating procedure. The coacervate to vesicle transition results in reconstruction of the coacervate micro‐droplets into novel three‐tiered micro‐compartments comprising a semi‐permeable negatively charged polyoxometalate/polyelectrolyte outer membrane, a sub‐membrane coacervate shell, and an internal aqueous lumen. We demonstrate that organic dyes, ssDNA, magnetic nanoparticles and enzymes can be concentrated into the interior of the micro‐compartments by sequestration into the coacervate micro‐droplets prior to vesicle formation. The vesicle‐encapsulated proteins are inaccessible to proteases in the external medium, and can be exploited for the spatial localization and coupling of two‐enzyme cascade reactions within single or between multiple populations of hybrid vesicles dispersed in aqueous media.     

Strategic Advances in Formation of Cell‐in‐Shell Structures: From Syntheses to Applications

Single‐cell nanoencapsulation, forming cell‐in‐shell structures, provides chemical tools for endowing living cells, in a programmed fashion, with exogenous properties that are neither innate nor naturally achievable, such as cascade organic‐catalysis, UV filtration, immunogenic shielding, and enhanced tolerance in vitro against lethal factors in real‐life settings. Recent advances in the field make it possible to further fine‐tune the physicochemical properties of the artificial shells encasing individual living cells, including on‐demand degradability and reconfigurability. Many different materials, other than polyelectrolytes, have been utilized as a cell‐coating material with proper choice of synthetic strategies to broaden the potential applications of cell‐in‐shell structures to whole‐cell catalysis and sensors, cell therapy, tissue engineering, probiotics packaging, and others. In addition to the conventional “one‐time‐only” chemical formation of cytoprotective, durable shells, an approach of autonomous, dynamic shellation has also recently been attempted to mimic the naturally occurring sporulation process and to make the artificial shell actively responsive and dynamic. Here, the recent development of synthetic strategies for formation of cell‐in‐shell structures along with the advanced shell properties acquired is reviewed. Demonstrated applications, such as whole‐cell biocatalysis and cell therapy, are discussed, followed by perspectives on the field of single‐cell nanoencapsulation.     

Versatile Yolk–Shell Encapsulation: Catalytic,Photothermal, and Sensing Demonstration

Here, a novel, versatile synthetic strategy to fabricate a yolk–shell structured material that can encapsulate virtually any functional noble metal or metal oxide nanocatalysts of any morphology in a free suspension fashion is reported. This strategy also enables encapsulation of more than one type of nanoparticle inside a single shell, including paramagnetic iron oxide used for magnetic separation. The mesoporous organosilica shell provides efficient mass transfer of small target molecules, while serving as a size exclusion barrier for larger interfering molecules. Major structural and functional advantages of this material design are demonstrated by performing three proof‐of‐concept applications. First, effective encapsulation of plasmonic gold nanospheres for localized photothermal heating and heat‐driven reaction inside the shell is shown. Second, hydrogenation catalysis is demonstrated under spatial confinement driven by palladium nanocubes. Finally, the surface‐enhanced Raman spectroscopic detection of model pollutant by gold nanorods is presented for highly sensitive environmental sensing with size exclusion.