Coupling PEDOT on Mesoporous Vanadium Nitride Arrays for Advanced Flexible All‐Solid‐State Supercapacitors

Tailored construction of advanced flexible supercapacitors (SCs) is of great importance to the development of high‐performance wearable modern electronics. Herein, a facile combined wet chemical method to fabricate novel mesoporous vanadium nitride (VN) composite arrays coupled with poly(3,4‐ethylenedioxythiophene) (PEDOT) as flexible electrodes for all‐solid‐state SCs is reported. The mesoporous VN nanosheets arrays prepared by the hydrothermal–nitridation method are composed of cross‐linked nanoparticles of 10–50 nm. To enhance electrochemical stability, the VN is further coupled with electrodeposited PEDOT shell to form high‐quality VN/PEDOT flexible arrays. Benefiting from high intrinsic reactivity and enhanced structural stability, the designed VN/PEDOT flexible arrays exhibit a high specific capacitance of 226.2 F g^?1 at 1 A g^?1 and an excellent cycle stability with 91.5% capacity retention after 5000 cycles at 10 A g^?1. In addition, high energy/power density (48.36 Wh kg^?1 at 2 A g^?1 and 4 kW kg^?1 at 5 A g^?1) and notable cycling life (91.6% retention over 10 000 cycles) are also achieved in the assembled asymmetric flexible supercapacitor cell with commercial nickel–cobalt–aluminum ternary oxides cathode and VN/PEDOT anode. This research opens up a way for construction of advanced hybrid organic–inorganic electrodes for flexible energy storage.     

Hierarchical 3D All‐Carbon Composite Structure Modified with N‐Doped Graphene Quantum Dots for High‐Performance Flexible Supercapacitors

Flexible supercapacitors have shown enormous potential for portable electronic devices. Herein, hierarchical 3D all‐carbon electrode materials are prepared by assembling N‐doped graphene quantum dots (N‐GQDs) on carbonized MOF materials (cZIF‐8) interweaved with carbon nanotubes (CNTs) for flexible all‐solid‐state supercapacitors. In this ternary electrode, cZIF‐8 provides a large accessible surface area, CNTs act as the electrical conductive network, and N‐GQDs serve as highly pseudocapactive materials. Due to the synergistic effect and hierarchical assembly of these components, N‐GQD@cZIF‐8/CNT electrodes exhibit a high specific capacitance of 540 F g^?1 at 0.5 A g^?1 in a 1 m H₂SO₄ electrolyte and excellent cycle stability with 90.9% capacity retention over 8000 cycles. The assembled supercapacitor possesses an energy density of 18.75 Wh kg^?1 with a power density of 108.7 W kg^?1. Meanwhile, three supercapacitors connected in series can power light‐emitting diodes for 20 min. All‐solid‐state N‐GQD@cZIF‐8/CNT flexible supercapacitor exhibits an energy density of 14 Wh kg^?1 with a power density of 89.3 W kg^?1, while the capacitance retention after 5000 cycles reaches 82%. This work provides an effective way to construct novel electrode materials with high energy storage density as well as good cycling performance and power density for high‐performance energy storage devices via the rational design.     

A Flexible Ionic Liquid Gelled PVA‐Li2SO4 Polymer Electrolyte for Semi‐Solid‐State Supercapacitors

A novel high‐performance flexible gel polymer electrolyte (FGPE) for supercapacitors is prepared by a freeze‐drying method. In the presence of 1‐butyl‐3‐methylimidazolium chloride (BMIMCl) ionic liquid, Li₂SO₄ can easily be added into poly(vinyl alcohol) (PVA) aqueous solution over a large concentration range. The resultant FGPE demonstrates considerably high ionic conductivity (37 mS cm⁻¹) and a high fracture strain at 100% elongation at the optimal weight ratio of PVA:BMIMCl:Li₂SO₄ = 1:3:2.2. The supercapacitor fabricated with the resultant FGPE and activated carbon electrodes shows an electrode‐specific capacitance of 136 F g⁻¹ with a stable operating voltage of 1.5 V, a maximum energy density of 10.6 Wh kg⁻¹, and a power density of 3400 W kg⁻¹. Double supercapacitors in series can efficiently drive a light emitting diode (LED) bulb for over 5 min and the retention of the specific capacitance reaches 90% even after 3000 charge–discharge cycles. The ionic conductivity and charge–discharge behaviors of the resultant FGPE are not affected by bending up to 180°. The flexible supercapacitor device shows only a small capacitance loss of 18% after 1000 cycles of 135° bending.     

A High‐Capacity Negative Electrode for Asymmetric Supercapacitors Based on a PMo12 Coordination Polymer with Novel Water‐Assisted Proton Channels

The development of a negative electrode for supercapacitors is a critical challenge for the next‐generation of energy‐storage devices. Herein, two new electrodes formed by the coordination polymers [Ni(itmb)₄(HPMo₁₂O₄₀)]·2H₂O ( 1 ) and [Zn(itmb)₃(H₂O)(HPMo₁₂O₄₀)]·4H₂O ( 2 ) (itmb = 1‐(imidazo‐1‐ly)‐4‐(1,2,4‐triazol‐1‐ylmethyl)benzene), synthesized by a simple hydrothermal method, are described. Compounds 1 and 2 show high capacitances of 477.9 and 890.2 F g^?1, respectively. An asymmetric supercapacitor device assembled using 2 which has novel water‐assisted proton channels as negative electrode and active carbon as positive electrode shows ultrahigh energy density and power density of 23.4 W h kg^?1 and 3864.4 W kg^?1, respectively. Moreover, the ability to feed a red light emitting diode (LED) also demonstrates the feasibility for practical use. The results allow a better elucidation of the storage mechanism in polyoxometalate‐based coordination polymers and provide a promising direction for exploring novel negative materials for new‐generation high‐performance supercapacitors.     

Core–Shell Nitrogen‐Doped Carbon Hollow Spheres/Co3O4 Nanosheets as Advanced Electrode for High‐Performance Supercapacitor

Co₃O₄/nitrogen‐doped carbon hollow spheres (Co₃O₄/NHCSs) with hierarchical structures are synthesized by virtue of a hydrothermal method and subsequent calcination treatment. NHCSs, as a hard template, can aid the generation of Co₃O₄ nanosheets on its surface; while SiO₂ spheres, as a sacrificed‐template, can be dissolved in the process. The prepared Co₃O₄/NHCS composites are investigated as the electrode active material. This composite exhibits an enhanced performance than Co₃O₄ itself. A higher specific capacitance of 581 F g^?1 at 1 A g^?1 and a higher rate performance of 91.6% retention at 20 A g^?1 are achieved, better than Co₃O₄ nanorods (318 F g^?1 at 1 A g^?1 and 67.1% retention at 20 A g^?1). In addition, the composite is employed as a positive electrode to fabricate an asymmetric supercapacitor. The device can deliver a high energy density of 34.5 Wh kg^?1 at the power density of 753 W kg^?1 and display a desirable cycling stability. All of these attractive results make the unique hierarchical Co₃O₄/NHCS core–shell structure a promising electrode material for high‐performance supercapacitors.     

Quantitative Control of Pore Size of Mesoporous Carbon Nanospheres through the Self‐Assembly of Diblock Copolymer Micelles in Solution

This paper reports facile synthesis of nitrogen‐doped mesoporous carbon nanospheres (MCNSs) with average diameters of around 300 nm and well‐controlled pore sizes ranging from 8 to 38 nm, by employing polystyrene‐b‐poly(ethylene oxide) (PS‐b‐PEO) diblocks with different PS block lengths as the soft templates and dopamine as the carbon‐rich precursor. For the first time, a linear equation is achieved for the quantitative control of the average pore size of MCNSs by simply adjusting a block length of diblock copolymer. The resultant MCNSs possess high surface areas of up to 450 m² g^?1 and nitrogen doping contents of up to ≈3 wt%. As electrode materials of supercapacitors, the MCNSs exhibit excellent electrochemical performance with high specific capacitances of up to 350 F g^?1 at 0.1 A g^?1, superior rate capability, and cycling stability. Interestingly, the specific capacitance of the MCNSs reduces linearly with increasing pore size, whereas the normalized capacitance by specific surface area remains invariable. This represents a new spectrum of the relationship between electrochemical capacitance and pore size (>5 nm) for porous carbons, which makes a complement to the existing spectra focusing on pore diameters of <5 nm.     

Sulfur‐Deficient Bismuth Sulfide/Nitrogen‐Doped Carbon Nanofibers as Advanced Free‐Standing Electrode for Asymmetric Supercapacitors

The use of free‐standing carbon‐based hybrids plays a crucial role to help fulfil ever‐increasing energy storage demands, but is greatly hindered by the limited number of active sites for fast charge adsorption/desorption processes. Herein, an efficient strategy is demonstrated for making defect‐rich bismuth sulfides in combination with surface nitrogen‐doped carbon nanofibers (dr‐Bi₂S₃/S‐NCNF) as flexible free‐standing electrodes for asymmetric supercapacitors. The dr‐Bi₂S₃/S‐NCNF composite exhibits superior electrochemical performances with an enhanced specific capacitance of 466 F g^?1 at a discharge current density of 1 A g^?1. The high performance of dr‐Bi₂S₃/S‐NCNF electrodes originates from its hierarchical structure of nitrogen‐doped carbon nanofibers with well‐anchored defect‐rich bismuth sulfides nanostructures. As modeled by density functional theory calculation, the dr‐Bi₂S₃/S‐NCNF electrodes exhibit a reduced OH^? adsorption energy of ‐3.15 eV, compared with that (–3.06 eV) of defect‐free bismuth sulfides/surface nitrogen‐doped carbon nanofiber (df‐Bi₂S₃/S‐NCNF). An asymmetric supercapacitor is further fabricated by utilizing dr‐Bi₂S₃/S‐NCNF hybrid as the negative electrode and S‐NCNF as the positive electrode. This composite exhibits a high energy density of 22.2 Wh kg^?1 at a power density of 677.3 W kg^?1. This work demonstrates a feasible strategy to construct advanced metal sulfide‐based free‐standing electrodes by incorporating defect‐rich structures using surface engineering principles.     

Efficient Supercapacitor Energy Storage Using Conjugated Microporous Polymer Networks Synthesized from Buchwald–Hartwig Coupling

Supercapacitors have received increasing interest as energy storage devices due to their rapid charge–discharge rates, high power densities, and high durability. In this work, novel conjugated microporous polymer (CMP) networks are presented for supercapacitor energy storage, namely 3D polyaminoanthraquinone (PAQ) networks synthesized via Buchwald–Hartwig coupling between 2,6‐diaminoanthraquinone and aryl bromides. PAQs exhibit surface areas up to 600 m² g^?1, good dispersibility in polar solvents, and can be processed to flexible electrodes. The PAQs exhibit a three‐electrode specific capacitance of 576 F g^?1 in 0.5 m H₂SO₄ at a current of 1 A g^?1 retaining 80–85% capacitances and nearly 100% Coulombic efficiencies (95–98%) upon 6000 cycles at a current density of 2 A g^?1. Asymmetric two‐electrode supercapacitors assembled by PAQs show a capacitance of 168 F g^?1 of total electrode materials, an energy density of 60 Wh kg^?1 at a power density of 1300 W kg^?1, and a wide working potential window (0–1.6 V). The asymmetric supercapacitors show Coulombic efficiencies up to 97% and can retain 95.5% of initial capacitance undergo 2000 cycles. This work thus presents novel promising CMP networks for charge energy storage.     

Charge Transfer Salt and Graphene Heterostructure‐Based Micro‐Supercapacitors with Alternating Current Line‐Filtering Performance

The rapid development of lightweight and wearable devices requires electronic circuits possessing compact, high‐efficiency, and long lifetime in very limited space. Alternating current (AC) line filters are usually tools for manipulating the surplus AC ripples for the operation of most common electronic devices. So far, only aluminum electrolytic capacitors (AECs) can be utilized for this target. However, the bulky volume in the electronic circuits and limited capacitances have long hindered the development of miniaturized and flexible electronics. In this work, a facile laser‐assisted fabrication approach toward an in‐plane micro‐supercapacitor for AC line filtering based on graphene and conventional charge transfer salt heterostructure is reported. Specifically, the devices reach a phase angle of 73.2° at 120 Hz, a specific capacitance of 151 µF cm^?2, and relaxation time constant of 0.32 ms at the characteristic frequency of 3056 Hz. Furthermore, the scan rate can reach up to 1000 V s^?1. Moreover, the flexibility and stability of the micro‐supercapacitors are tested in gel electrolyte H₂SO₄/PVA, and the capacitance of micro‐supercapacitors retain a stability over 98% after 10 000 cycles. Thus, such micro‐supercapacitors with excellent electrochemical performance can be almost compared with the AECs and will be the next‐generation capacitors for AC line filters.     

Etching‐Assisted Crumpled Graphene Wrapped Spiky Iron Oxide Particles for High‐Performance Li‐Ion Hybrid Supercapacitor

From graphene oxide wrapped iron oxide particles with etching/reduction process, high‐performance anode and cathode materials of lithium‐ion hybrid supercapacitors are obtained in the same process with different etching conditions, which consist of partially etched crumpled graphene (CG) wrapped spiky iron oxide particles (CG@SF) for a battery‐type anode, and fully etched CG for a capacitive‐type cathode. The CG is formed along the shape of spikily etched particles, resulting in high specific surface area and electrical conductivity, thus the CG‐based cathode exhibits remarkable capacitive performance of 210 F g^?1 and excellent rate capabilities. The CG@SF can also be ideal anode materials owing to spiky and porous morphology of the particles and tightly attached crumpled graphene onto the spiky particles, which provides structural stability and low contact resistance during repetitive lithiation/delithiation processes. The CG@SF anode shows a particularly high capacitive performance of 1420 mAh g^?1 after 270 cycles, continuously increases capacity beyond the 270th cycle, and also maintains a high capacity of 170 mAh g^?1 at extremely high speeds of 100 C. The full‐cell exhibits a higher energy density up to 121 Wh kg^?1 and maintains high energy density of 60.1 Wh kg^?1 at 18.0 kW kg^?1. This system could thus be a practical energy storage system to fill the gap between batteries and supercapacitors.     

High Performance of N‐Doped Graphene with Bubble‐like Textures for Supercapacitors

Nitrogen‐doped graphene (NG) with wrinkled and bubble‐like texture is fabricated by a thermal treatment. Especially, a novel sonication‐assisted pretreatment with nitric acid is used to further oxidize graphene oxide and its binding with melamine molecules. There are many bubble‐like nanoflakes with a dimension of about 10 nm appeared on the undulated graphene nanosheets. The bubble‐like texture provides more active sites for effective ion transport and reversible capacitive behavior. The specific surface area of NG (5.03 at% N) can reach up to 438.7 m² g^?1, and the NG electrode demonstrates high specific capacitance (481 F g^?1 at 1 A g^?1, four times higher than reduced graphene oxide electrode (127.5 F g^?1)), superior cycle stability (the capacitance retention of 98.9% in 2 m KOH and 99.2% in 1 m H₂SO₄ after 8000 cycles), and excellent energy density (42.8 Wh kg^?1 at power density of 500 W kg^?1 in 2 m KOH aqueous electrolyte). The results indicate the potential use of NG as graphene‐based electrode material for energy storage devices.     

Ionic Liquid‐Controlled Growth of NiCo2S4 3D Hierarchical Hollow Nanoarrow Arrays on Ni Foam for Superior Performance Binder Free Hybrid Supercapacitors

A significant development in the design of a NiCo₂S₄ 3D hierarchical hollow nanoarrow arrays (HNA)‐based supercapacitor binder free electrode assembled by 1D hollow nanoneedles and 2D nanosheets on a Ni foam collector through controlling ionic liquid 1‐octyl‐3‐methylimidazolium chloride ([OMIm]Cl) concentration is reported. The unique NiCo₂S₄‐HNA electrode acquires high specific capacity (1297 C g^?1 at 1 A g^?1, 2.59 C cm^?2 at 2 mA cm^?2), excellent rate capability (maintaining 73.0% at 20 A g^?1), and long operational life (maintaining 92.4% after 10 000 cycles at 5 A g^?1), which are superior to those for 1D hollow nanoneedle arrays (HNN) and 2D porous nanoflake arrays (PNF). The outstanding electrochemical performance is attributed to the novel 3D structure with large specific surface, hollow cores, high porosity as well as stable architecture. In addition, a hybrid supercapacitor applying 3D NiCo₂S₄‐HNA as the positive electrode and active carbon as the negative electrode exhibits a high energy density of 42.5 Wh kg^?1 at a power density of 2684.2 W kg^?1 in an operating voltage of 1.6 V. Robust cycling stability is also expressed with 84.9% retention after repeating 10 000 cycles at 5 A g^?1, implying their great potential in superior‐performance supercapacitors.     

Mesoporous NiS2 Nanospheres Anode with Pseudocapacitance for High‐Rate and Long‐Life Sodium‐Ion Battery

It is of great importance to exploit electrode materials for sodium‐ion batteries (SIBs) with low cost, long life, and high‐rate capability. However, achieving quick charge and high power density is still a major challenge for most SIBs electrodes because of the sluggish sodiation kinetics. Herein, uniform and mesoporous NiS₂ nanospheres are synthesized via a facile one‐step polyvinylpyrrolidone assisted method. By controlling the voltage window, the mesoporous NiS₂ nanospheres present excellent electrochemical performance in SIBs. It delivers a high reversible specific capacity of 692 mA h g^?1. The NiS₂ anode also exhibits excellent high‐rate capability (253 mA h g^?1 at 5 A g^?1) and long‐term cycling performance (319 mA h g^?1 capacity remained even after 1000 cycles at 0.5 A g^?1). A dominant pseudocapacitance contribution is identified and verified by kinetics analysis. In addition, the amorphization and conversion reactions during the electrochemical process of the mesoporous NiS₂ nanospheres is also investigated by in situ X‐ray diffraction. The impressive electrochemical performance reveals that the NiS₂ offers great potential toward the development of next generation large scale energy storage.     

High‐Performance 2.6 V Aqueous Asymmetric Supercapacitors based on In Situ Formed Na0.5MnO2 Nanosheet Assembled Nanowall Arrays

The voltage limit for aqueous asymmetric supercapacitors is usually 2 V, which impedes further improvement in energy density. Here, high Na content Birnessite Na_0.5MnO₂ nanosheet assembled nanowall arrays are in situ formed on carbon cloth via electrochemical oxidation. It is interesting to find that the electrode potential window for Na_0.5MnO₂ nanowall arrays can be extended to 0–1.3 V (vs Ag/AgCl) with significantly increased specific capacitance up to 366 F g^?1. The extended potential window for the Na_0.5MnO₂ electrode provides the opportunity to further increase the cell voltage of aqueous asymmetric supercapacitors beyond 2 V. To construct the asymmetric supercapacitor, carbon‐coated Fe₃O₄ nanorod arrays are synthesized as the anode and can stably work in a negative potential window of ?1.3 to 0 V (vs Ag/AgCl). For the first time, a 2.6 V aqueous asymmetric supercapacitor is demonstrated by using Na_0.5MnO₂ nanowall arrays as the cathode and carbon‐coated Fe₃O₄ nanorod arrays as the anode. In particular, the 2.6 V Na_0.5MnO₂//Fe₃O₄@C asymmetric supercapacitor exhibits a large energy density of up to 81 Wh kg^?1 as well as excellent rate capability and cycle performance, outperforming previously reported MnO₂‐based supercapacitors. This work provides new opportunities for developing high‐voltage aqueous asymmetric supercapacitors with further increased energy density.     

Phosphorus Regulated Cobalt Oxide@Nitrogen‐Doped Carbon Nanowires for Flexible Quasi‐Solid‐State Supercapacitors

Battery‐type materials are promising candidates for achieving high specific capacity for supercapacitors. However, their slow reaction kinetics hinders the improvement in electrochemical performance. Herein, a hybrid structure of P‐doped Co₃O₄ (P‐Co₃O₄) ultrafine nanoparticles in situ encapsulated into P, N co‐doped carbon (P, N‐C) nanowires by a pyrolysis–oxidation–phosphorization of 1D metal–organic frameworks derived from Co‐layered double hydroxide as self‐template and reactant is reported. This hybrid structure prevents active material agglomeration and maintains a 1D oriented arrangement, which exhibits a large accessible surface area and hierarchically porous feature, enabling sufficient permeation and transfer of electrolyte ions. Theoretical calculations demonstrate that the P dopants in P‐Co₃O₄@P, N‐C could reduce the adsorption energy of OH^? and regulate the electrical properties. Accordingly, the P‐Co₃O₄@P, N‐C delivers a high specific capacity of 669 mC cm^?2 at 1 mA cm^?2 and an ultralong cycle life with only 4.8% loss over 5000 cycles at 30 mA cm^?2. During the fabrication of P‐Co₃O₄@P, N‐C, Co@P, N‐C is simultaneously developed, which can be integrated with P‐Co₃O₄@P, N‐C for the assembly of asymmetric supercapacitors. These devices achieve a high energy density of 47.6 W h kg^?1 at 750 W kg^?1 and impressive flexibility, exhibiting a great potential in practical applications.     

High‐Stacking‐Density,Superior‐Roughness LDH Bridged with Vertically Aligned Graphene for High‐Performance Asymmetric Supercapacitors

The high‐performance electrode materials with tuned surface and interface structure and functionalities are highly demanded for advanced supercapacitors. A novel strategy is presented to conFigure high‐stacking‐density, superior‐roughness nickel manganese layered double hydroxide (LDH) bridged by vertically aligned graphene (VG) with nickel foam (NF) as the conductive collector, yielding the LDH‐NF@VG hybrids for asymmetric supercapacitors. The VG nanosheets provide numerous electron transfer channels for quick redox reactions, and well‐developed open structure for fast mass transport. Moreover, the high‐stacking‐density LDH grown and assembled on VG nanosheets result in a superior hydrophilicity derived from the tuned nano/microstructures, especially microroughness. Such a high stacking density with abundant active sites and superior wettability can be easily accessed by aqueous electrolytes. Benefitting from the above features, the LDH‐NF@VG can deliver a high capacitance of 2920 F g^?1 at a current density of 2 A g^?1, and the asymmetric supercapacitor with the LDH‐NF@VG as positive electrode and activated carbon as negative electrode can deliver a high energy density of 56.8 Wh kg^?1 at a power density of 260 W kg^?1, with a high specific capacitance retention rate of 87% even after 10 000 cycles.     

Zn‐Ion Hybrid Micro‐Supercapacitors with Ultrahigh Areal Energy Density and Long‐Term Durability

On‐chip micro‐supercapacitors (MSCs), as promising power candidates for microdevices, typically exhibit high power density, large charge/discharge rates, and long cycling lifetimes. However, as for most reported MSCs, the unsatisfactory areal energy density (<10 µWh cm^?2) still hinders their practical applications. Herein, a new‐type Zn‐ion hybrid MSC with ultrahigh areal energy density and long‐term durability is demonstrated. Benefiting from fast ion adsorption/desorption on the capacitor‐type activated‐carbon cathode and reversible Zn stripping/plating on the battery‐type electrodeposited Zn‐nanosheet anode, the fabricated Zn‐ion hybrid MSCs exhibit remarkable areal capacitance of 1297 mF cm^?2 at 0.16 mA cm^?2 (259.4 F g^?1 at a current density of 0.05 A g^?1), landmark areal energy density (115.4 µWh cm^?2 at 0.16 mW cm^?2), and a superb cycling stability without noticeable decay after 10 000 cycles. This work will inspire the fabrication and development of new high‐performance microenergy devices based on novel device design.     

Phosphorus‐Mediated MoS2 Nanowires as a High‐Performance Electrode Material for Quasi‐Solid‐State Sodium‐Ion Intercalation Supercapacitors

Molybdenum disulfide (MoS₂) is a promising electrode material for electrochemical energy storage owing to its high theoretical specific capacity and fascinating 2D layered structure. However, its sluggish kinetics for ionic diffusion and charge transfer limits its practical applications. Here, a promising strategy is reported for enhancing the Na⁺‐ion charge storage kinetics of MoS₂ for supercapacitors. In this strategy, electrical conductivity is enhanced and the diffusion barrier of Na⁺ ion is lowered by a facile phosphorus‐doping treatment. Density functional theory results reveal that the lowest energy barrier of dilute Na‐vacancy diffusion on P‐doped MoS₂ (0.11 eV) is considerably lower than that on pure MoS₂ (0.19 eV), thereby signifying a prominent rate performance at high Na intercalation stages upon P‐doping. Moreover, the Na‐vacancy diffusion coefficient of the P‐doped MoS₂ at room temperatures can be enhanced substantially by approximately two orders of magnitude (10^?6–10^?4 cm² s^?1) compared with pure MoS₂. Finally, the quasi‐solid‐state asymmetrical supercapacitor assembled with P‐doped MoS₂ and MnO₂, as the positive and negative electrode materials, respectively, exhibits an ultrahigh energy density of 67.4 W h kg^?1 at 850 W kg^?1 and excellent cycling stability with 93.4% capacitance retention after 5000 cycles at 8 A g^?1.     

Single‐Crystalline,Metallic TiC Nanowires for Highly Robust and Wide‐Temperature Electrochemical Energy Storage

Customized electrode materials with good temperature adaptability and high‐rate capability are critical to the development of wide‐temperature power sources. Herein, high‐quality TiC nanowires are uniformly grown on flexible carbon cloth as free‐standing electric‐double‐layer supercapacitor electrode. The TiC nanowires, 20–40 nm wide and 3–6 µm long, are single‐crystalline and highly conductive that is close to typical metal. Symmetric supercapacitors are constructed with ionic liquid electrolyte and TiC nanowires electrodes as wide‐temperature and long‐cycle stable power source. Ultrastable high‐rate cycling life of TiC nanowire arrays electrodes is demonstrated with capacitance retention of 96.8% at 60 °C (≈440 F g^?1), 99% at 25 °C (≈400 F g^?1), and 98% at ?25 °C (≈240 F g^?1) after 50 000 cycles at 10 A g^?1. Moreover, due to high electrical conductivity, the TiC nanowire arrays show ultrafast energy release with a fast response time constant of ≈0.7 ms. The results demonstrate the viability of metal carbide nanostructures as wide‐temperature, robust electrode materials for high‐rate and ultrastable supercapacitors.     

Carbon‐MEMS‐Based Alternating Stacked MoS2@rGO‐CNT Micro‐Supercapacitor with High Capacitance and Energy Density

A novel process to fabricate a carbon‐microelectromechanical‐system‐based alternating stacked MoS₂@rGO–carbon‐nanotube (CNT) micro‐supercapacitor (MSC) is reported. The MSC is fabricated by successively repeated spin‐coating of MoS₂@rGO/photoresist and CNT/photoresist composites twice, followed by photoetching, developing, and pyrolysis. MoS₂@rGO and CNTs are embedded in the carbon microelectrodes, which cooperatively enhance the performance of the MSC. The fabricated MSC exhibits a high areal capacitance of 13.7 mF cm^?2 and an energy density of 1.9 µWh cm^?2 (5.6 mWh cm^?3), which exceed many reported carbon‐ and MoS₂‐based MSCs. The MSC also retains 68% of capacitance at a current density of 2 mA cm^?2 (5.9 A cm^?3) and an outstanding cycling performance (96.6% after 10 000 cycles, at a scan rate of 1 V s^?1). Compared with other MSCs, the MSC in this study is fabricated by a low‐cost and facile process, and it achieves an excellent and stable electrochemical performance. This approach could be highly promising for applications in integration of micro/nanostructures into microdevices/systems.