Transition‐Metal‐Based Electrocatalysts as Cocatalysts for Photoelectrochemical Water Splitting: A Mini Review

Converting solar energy into hydrogen via photoelectrochemical (PEC) water splitting is one of the most promising approaches for a sustainable energy supply. Highly active, cost‐effective, and robust photoelectrodes are undoubtedly crucial for the PEC technology. To achieve this goal, transition‐metal‐based electrocatalysts have been widely used as cocatalysts to improve the performance of PEC cells for water splitting. Herein, this Review summarizes the recent progresses of the design, synthesis, and application of transition‐metal‐based electrocatalysts as cocatalysts for PEC water splitting. Mo, Ni, Co‐based electrocatalysts for the hydrogen evolution reaction (HER) and Co, Ni, Fe‐based electrocatalysts for the oxygen evolution reaction (OER) are emphasized as cocatalysts for efficient PEC HER and OER, respectively. Particularly, some most efficient and robust photoelectrode systems with record photocurrent density or durability for the half reactions of HER and OER are highlighted and discussed. In addition, the self‐biased PEC devices with high solar‐to‐hydrogen efficiency based on earth‐abundant materials are also addressed. Finally, this Review is concluded with a summary and remarks on some challenges and opportunities for the further development of transition‐metal‐based electrocatalysts as cocatalysts for PEC water splitting.     

Iridium‐Based Multimetallic Porous Hollow Nanocrystals for Efficient Overall‐Water‐Splitting Catalysis

The development of active and durable bifunctional electrocatalysts for overall water splitting is mandatory for renewable energy conversion. This study reports a general method for controllable synthesis of a class of IrM (M = Co, Ni, CoNi) multimetallic porous hollow nanocrystals (PHNCs), through etching Ir‐based, multimetallic, solid nanocrystals using Fe³⁺ ions, as catalysts for boosting overall water splitting. The Ir‐based multimetallic PHNCs show transition‐metal‐dependent bifunctional electrocatalytic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in acidic electrolyte, with IrCo and IrCoNi PHNCs being the best for HER and OER, respectively. First‐principles calculations reveal a ligand effect, induced by alloying Ir with 3d transition metals, can weaken the adsorption energy of oxygen intermediates, which is the key to realizing much‐enhanced OER activity. The IrCoNi PHNCs are highly efficient in overall‐water‐splitting catalysis by showing a low cell voltage of only 1.56 V at a current density of 2 mA cm^?2, and only 8 mV of polarization‐curve shift after a 1000‐cycle durability test in 0.5 m H₂SO₄ solution. This work highlights a potentially powerful strategy toward the general synthesis of novel, multimetallic, PHNCs as highly active and durable bifunctional electrocatalysts for high‐performance electrochemical overall‐water‐splitting devices.     

Exceptional Performance of Hierarchical Ni–Fe (hydr)oxide@NiCu Electrocatalysts for Water Splitting

Developing low‐cost bifunctional electrocatalysts with superior activity for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is of great importance for the widespread application of the water splitting technique. In this work, using earth‐abundant transition metals (i.e., nickel, iron, and copper), 3D hierarchical nanoarchitectures, consisting of ultrathin Ni–Fe layered‐double‐hydroxide (Ni–Fe LDH) nanosheets or porous Ni–Fe oxides (NiFeO_x) assembled to a metallic NiCu alloy, are delicately constructed. In alkaline solution, the as‐prepared Ni–Fe LDH@NiCu possesses outstanding OER activity, achieving a current density of 10 mA cm^?2 at an overpotential of 218 mV, which is smaller than that of RuO₂ catalyst (249 mV). In contrast, the resulting NiFeO_x@NiCu exhibits better HER activity, yielding a current density of 10 mA cm^?2 at an overpotential of 66 mV, which is slightly higher than that of Pt catalyst (53 mV) but superior to all other transition metal (hydr)oxide‐based electrocatalysts. The remarkable activity of the Ni–Fe LDH@NiCu and NiFeO_x@NiCu is further demonstrated by a 1.5 V solar‐panel‐powered electrolyzer, resulting in current densities of 10 and 50 mA cm^?2 at overpotentials of 293 and 506 mV, respectively. Such performance renders the as‐prepared materials as the best bifunctional electrocatalysts so far.     

Recent Progress in Cobalt‐Based Heterogeneous Catalysts for Electrochemical Water Splitting

Water electrolysis is considered as the most promising technology for hydrogen production. Much research has been devoted to developing efficient electrocatalysts for hydrogen production via the hydrogen evolution reaction (HER) and oxygen production via the oxygen evolution reaction (OER). The optimum electrocatalysts can drive down the energy costs needed for water splitting via lowering the overpotential. A number of cobalt (Co)‐based materials have been developed over past years as non‐noble‐metal heterogeneous electrocatalysts for HER and OER. Recent progress in this field is summarized here, especially highlighting several important bifunctional catalysts. Various approaches to improve or optimize the electrocatalysts are introduced. Finally, the current existing challenges and the future working directions for enhancing the performance of Co‐implicated electrocatalysts are proposed.     

Nanoarchitectonics for Transition‐Metal‐Sulfide‐Based Electrocatalysts for Water Splitting

Heterogenous electrocatalysts based on transition metal sulfides (TMS) are being actively explored in renewable energy research because nanostructured forms support high intrinsic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Herein, it is described how researchers are working to improve the performance of TMS‐based materials by manipulating their internal and external nanoarchitectures. A general introduction to the water‐splitting reaction is initially provided to explain the most important parameters in accessing the catalytic performance of nanomaterials catalysts. Later, the general synthetic methods used to prepare TMS‐based materials are explained in order to delve into the various strategies being used to achieve higher electrocatalytic performance in the HER. Complementary strategies can be used to increase the OER performance of TMS, resulting in bifunctional water‐splitting electrocatalysts for both the HER and the OER. Finally, the current challenges and future opportunities of TMS materials in the context of water splitting are summarized. The aim herein is to provide insights gathered in the process of studying TMS, and describe valuable guidelines for engineering other kinds of nanomaterial catalysts for energy conversion and storage technologies.     

Zirconium‐Regulation‐Induced Bifunctionality in 3D Cobalt–Iron Oxide Nanosheets for Overall Water Splitting

The design of high‐efficiency non‐noble bifunctional electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is paramount for water splitting technologies and associated renewable energy systems. Spinel‐structured oxides with rich redox properties can serve as alternative low‐cost OER electrocatalysts but with poor HER performance. Here, zirconium regulation in 3D CoFe₂O₄ (CoFeZr oxides) nanosheets on nickel foam, as a novel strategy inducing bifunctionality toward OER and HER for overall water splitting, is reported. It is found that the incorporation of Zr into CoFe₂O₄ can tune the nanosheet morphology and electronic structure around the Co and Fe sites for optimizing adsorption energies, thus effectively enhancing the intrinsic activity of active sites. The as‐synthesized 3D CoFeZr oxide nanosheet exhibits high OER activity with small overpotential, low Tafel slope, and good stability. Moreover, it shows unprecedented HER activity with a small overpotential of 104 mV at 10 mA cm^?2 in alkaline media, which is better than ever reported counterparts. When employing the CoFeZr oxides nanosheets as both anode and cathode catalysts for overall water splitting, a current density of 10 mA cm^?2 is achieved at the cell voltage of 1.63 V in 1.0 m KOH.     

Regulating Water‐Reduction Kinetics in Cobalt Phosphide for Enhancing HER Catalytic Activity in Alkaline Solution

Electrochemical water splitting to produce hydrogen renders a promising pathway for renewable energy storage. Considering limited electrocatalysts have good oxygen‐evolution reaction (OER) catalytic activity in acid solution while numerous economical materials show excellent OER catalytic performance in alkaline solution, developing new strategies that enhance the alkaline hydrogen‐evolution reaction (HER) catalytic activity of cost‐effective catalysts is highly desirable for achieving highly efficient overall water splitting. Herein, it is demonstrated that synergistic regulation of water dissociation and optimization of hydrogen adsorption free energy on electrocatalysts can significantly promote alkaline HER catalysis. Using oxygen‐incorporated Co₂P as an example, the synergistic effect brings about 15‐fold enhancement of alkaline HER activity. Theory calculations confirm that the water dissociation free energy of Co₂P decreases significantly after oxygen incorporation, and the hydrogen adsorption free energy can also be optimized simultaneously. The finding suggests the powerful effectiveness of synergetic regulation of water dissociation and optimization of hydrogen adsorption free energy on electrocatalysts for alkaline HER catalysis.     

Surface Oxidation of AuNi Heterodimers to Achieve High Activities toward Hydrogen/Oxygen Evolution and Oxygen Reduction Reactions

Although much attention has been paid to the exploration of highly active electrocatalysts, especially catalysts for hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and oxygen reduction reaction (ORR), the development of multifunctional catalysts remains a challenge. Here, we utilize AuNi heterodimers as the starting materials to achieve high activities toward HER, OER and ORR. The HER and ORR activities in an alkali environment are similar to those of Pt catalysts, and the OER activity is very high and better than that of commercial IrO₂. Both the experimental and calculated results suggest that the surface oxidation under oxidative conditions is the main reason for the different activities. The NiO/Ni interface which exists in the as‐synthesized heterodimers contributes to high HER activity, the Ni(OH)₂‐Ni‐Au interface and the surface Ni(OH)₂ obtained in electrochemical conditons gives rise to promising ORR and OER activities, respectively. As a comparison, a Au@Ni core‐shell structure is also synthesized and examined. The core‐shell structure shows lower activities for HER and OER than the heterodimers, and reduces O₂ selectively to H₂O₂. The work here allows for the development of a method to design multifunctional catalysts via the partial oxidation of a metal surface to create different active centers.     

Synergism of Geometric Construction and Electronic Regulation: 3D Se‐(NiCo)Sx/(OH)x Nanosheets for Highly Efficient Overall Water Splitting

The exploration of highly efficient electrocatalysts for both oxygen and hydrogen generation via water splitting is receiving considerable attention in recent decades. Up till now, Pt‐based catalysts still exhibit the best hydrogen evolution reaction (HER) performance and Ir/Ru‐based oxides are identified as the benchmark for oxygen evolution reaction (OER). However, the high cost and rarity of these materials extremely hinder their large‐scale applications. This paper describes the construction of the ultrathin defect‐enriched 3D Se‐(NiCo)S_x/(OH)_x nanosheets for overall water splitting through a facile Se‐induced hydrothermal treatment. Via Se‐induced fabrication, highly efficient Se‐(NiCo)S_x/(OH)_x nanosheets are successfully fabricated through morphology optimization, defect engineering, and electronic structure tailoring. The as‐prepared hybrids exhibit relatively low overpotentials of 155 and 103 mV at the current density of 10 mA cm^?2 for OER and HER, respectively. Moreover, an overall water‐splitting device delivers a current density of 10 mA cm^?2 for ≈66 h without obvious degradation.     

In-situ formed NiS/Ni coupled interface for efficient oxygen evolution and hydrogen evolution

High-performance electrocatalysts for water splitting are desired due to the urgent requirement of clean and sustainable hydrogen production.To reduce the energy barrier,herein,we adopt a facile in-situ surface modification strategy to develop a low-cost and efficient electrocatalyst for water splitting.The synthesized mulberry-like NiS/Ni nanoparticles exhibit excellent catalytic performance for water splitting.Small overpotentials of 301 and 161 mV are needed to drive the current density of 10 mA cm~(-2) accompanying with remarkably low Tafel slopes of 46 and 74 mV dec~(-1) for oxygen evolution reaction(OER) and hydrogen evolution reaction(HER),respectively.Meanwhile,a robust electrochemical stability is demonstrated.Further high-resolution X-ray photoelectron spectroscopy analyses reveal that the intrinsic HER activity improvement is attributed to the electron-enriched S on the strongly coupled NiS and Ni interface,which simultaneously facilitates the important electron transfer,consistent with the electrochemical impedance results.The post characterizations demonstrate that surface reconstructed oxyhydroxide contributes to the OER activity and NiS/Ni is an OER precatalyst.This structure construction with in-situ formation of active interface provides an effective way to design efficient electrocatalysts for energy conversion.     

Transition‐Metal‐Doped RuIr Bifunctional Nanocrystals for Overall Water Splitting in Acidic Environments

The establishment of electrocatalysts with bifunctionality for efficient oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in acidic environments is necessary for the development of proton exchange membrane (PEM) water electrolyzers for the production of clean hydrogen fuel. RuIr alloy is considered to be a promising electrocatalyst because of its favorable OER performance and potential for HER. Here, the design of a bifunctional electrocatalyst with greatly boosted water‐splitting performance from doping RuIr alloy nanocrystals with transition metals that modify electronic structure and binding strength of reaction intermediates is reported. Significantly, Co‐RuIr results in small overpotentials of 235 mV for OER and 14 mV for HER (@ 10 mA cm^?2 current density) in 0.1 m HClO₄ media. Therefore a cell voltage of just 1.52 V is needed for overall water splitting to produce hydrogen and oxygen. More importantly, for a series of M‐RuIr (M = Co, Ni, Fe), the catalytic activity dependence at fundamental level on the chemical/valence states is used to establish a novel composition‐activity relationship. This permits new design principles for bifunctional electrocatalysts.     

Self-supporting amorphous nanoporous NiFeCoP electrocatalyst for efficient overall water splitting

The design of cost-effective and earth-abundant bifunctional electrocatalysts for highly efficient oxy-gen evolution reaction(OER)and hydrogen evolution reaction(HER)is important for water splitting as an advanced renewable energy transformation system.In this work,the self-supporting amorphous NiFeCoP catalyst with nanoporous structure via a facile electrochemical dealloying method is reported.Benefiting from the bicontinuous nanostructure,disordered atomic arrangement,abundant active sites and synergic effect of various transition metals,the as-prepared nanoporous NiFeCoP(np-NiFeCoP)cat-alyst exhibits good electrocatalytic activity,which achieves the current densities of 10 mA cm-2 at low overpotentials of 244 mV and 105 mV for OER and HER in 1.0 M KOH,respectively.In addition,the bifunc-tional electrocatalyst also shows outstanding and durable electrocatalytic activity in water splitting with a small voltage of 1.62 V to drive a current density of 10 mA cm-2 in a two-electrode electrolyzer system.The present work would provide a feasible strategy to explore the efficient and low-cost bifunctional electrocatalysts toward overall water splitting.     

A Robust Nonprecious CuFe Composite as a Highly Efficient Bifunctional Catalyst for Overall Electrochemical Water Splitting

To generate hydrogen, which is a clean energy carrier, a combination of electrolysis and renewable energy sources is desirable. In particular, for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in electrolysis, it is necessary to develop nonprecious, efficient, and durable catalysts. A robust nonprecious copper–iron (CuFe) bimetallic composite is reported that can be used as a highly efficient bifunctional catalyst for overall water splitting in an alkaline medium. The catalyst exhibits outstanding OER and HER activity, and very low OER and HER overpotentials (218 and 158 mV, respectively) are necessary to attain a current density of 10 mA cm^?2. When used in a two‐electrode water electrolyzer system for overall water splitting, it not only achieves high durability (even at a very high current density of 100 mA cm^?2) but also reduces the potential required to split water into oxygen and hydrogen at 10 mA cm^?2 to 1.64 V for 100 h of continuous operation.     

Hierarchical NiMoP2-Ni2P with amorphous interface as superior bifunctional electrocatalysts for overall water splitting

Producing highly efficient bifunctional catalyst for the generation of hydrogen and oxygen through overall water splitting is an emerging direction in electrocatalysis,Herein,a dandelion-like hierarchi-cal NiMoP2-Ni2P(nanowire/nanoparticle)heterostructure was synthesized for efficient electrochemical water splitting.The NiMoP2-Ni2P heterostructures grown on carbon cloth as a freestanding integrated electrode exhibited excellent oxygen evolution reaction(OER)activity and hydrogen evolution reaction(HER)activities with low overpotentials(258 mV and 53 mV to reach 10 mA cm-2 for the OER and HER,respectively),and small Tafel slope(45 mV dec-1 and 58 mV dec-1 for the OER and HER,respectively).Moreover,the NiMoP2-Ni2 P heterostructure can act as both anode and cathode catalysts for overall water splitting with low overall potential of 1.48 V at 10 mA cm-2.Density functional theory(DFT)combined with structural probes suggests that the amorphous heterogeneous interfaces play an essential role in enhanced catalytic performance.     

Amorphous Catalysts and Electrochemical Water Splitting: An Untold Story of Harmony

In the near future, sustainable energy conversion and storage will largely depend on the electrochemical splitting of water into hydrogen and oxygen. Perceiving this, countless research works focussing on the fundamentals of electrocatalysis of water splitting and on performance improvements are being reported everyday around the globe. Electrocatalysts of high activity, selectivity, and stability are anticipated as they directly determine energy‐ and cost efficiency of water electrolyzers. Amorphous electrocatalysts with several advantages over crystalline counterparts are found to perform better in electrocatalytic water splitting. There are plenty of studies witnessing performance enhancements in electrocatalysis of water splitting while employing amorphous materials as catalysts. The harmony between the flexibility of amorphous electrocatalysts and electrocatalysis of water splitting (both the oxygen evolution reaction [OER] and the hydrogen evolution reaction [HER]) is one of the untold and unsummarized stories in the field of electrocatalytic water splitting. This Review is devoted to comprehensively discussing the upsurge of amorphous electrocatalysts in electrochemical water splitting. In addition to that, the basics of electrocatalysis of water splitting are also elaborately introduced and the characteristics of a good electrocatalyst for OER and HER are discussed.     

Ultrathin Ni(0)-Embedded Ni(OH)2 Heterostructured Nanosheets with Enhanced Electrochemical Overall Water Splitting

The efficiency of splitting water into hydrogen and oxygen is highly dependent on the catalyst used. Herein, ultrathin Ni(0)-embedded Ni(OH)₂ heterostructured nanosheets, referred to as Ni/Ni(OH)₂ nanosheets, with superior water splitting activity are synthesized by a partial reduction strategy. This synthetic strategy confers the heterostructured Ni/Ni(OH)₂ nanosheets with abundant Ni(0)-Ni(II) active interfaces for hydrogen evolution reaction (HER) and Ni(II) defects as transitional active sites for oxygen evolution reaction (OER). The obtained Ni/Ni(OH)₂ nanosheets exhibit noble metal-like electrocatalytic activities toward overall water splitting in alkaline condition, to offer 10 mA cm⁻² in HER and OER, the required overpotentials are only 77 and 270 mV, respectively. Based on such an outstanding activity, a water splitting electrolysis cell using the Ni/Ni(OH)₂ nanosheets as the cathode and anode electrocatalysts has been successfully built. When the output voltage of the electrolytic cell is 1.59 V, a current density of 10 mA cm⁻² can be obtained. Moreover, the durability of Ni/Ni(OH)₂ nanosheets in the alkaline electrolyte is much better than that of noble metals. No obvious performance decay is observed after 20 h of catalysis. This facile strategy paves the way for designing highly active non-precious-metal catalyst to generate both hydrogen and oxygen by electrolyzing water at room temperature.     

Accelerated Hydrogen Evolution Kinetics on NiFe‐Layered Double Hydroxide Electrocatalysts by Tailoring Water Dissociation Active Sites

Owing to its earth abundance, low kinetic overpotential, and superior stability, NiFe‐layered double hydroxide (NiFe‐LDH) has emerged as a promising electrocatalyst for catalyzing water splitting, especially oxygen evolution reaction (OER), in alkaline solutions. Unfortunately, as a result of extremely sluggish water dissociation kinetics (Volmer step), hydrogen evolution reaction (HER) activity of the NiFe‐LDH is rather poor in alkaline environment. Here a novel strategy is demonstrated for substantially accelerating the hydrogen evolution kinetics of the NiFe‐LDH by partially substituting Fe atoms with Ru. In a 1 m KOH solution, the as‐synthesized Ru‐doped NiFe‐LDH nanosheets (NiFeRu‐LDH) exhibit excellent HER performance with an overpotential of 29 mV at 10 mA cm^?2, which is much lower than those of noble metal Pt/C and reported electrocatalysts. Both experimental and theoretical results reveal that the introduction of Ru atoms into NiFe‐LDH can efficiently reduce energy barrier of the Volmer step, eventually accelerating its HER kinetics. Benefitting from its outstanding HER activity and remained excellent OER activity, the NiFeRu‐LDH steadily drives an alkaline electrolyzer with a current density of 10 mA cm^?2 at a cell voltage of 1.52 V, which is much lower than the values for Pt/C–Ir/C couple and state‐of‐the‐art overall water‐splitting electrocatalysts.     

Electronic Structure Evolution in Tricomponent Metal Phosphides with Reduced Activation Energy for Efficient Electrocatalytic Oxygen Evolution

Non‐noble metal catalysts for high‐active electrocatalytic oxygen evolution reaction (OER) are essential in large‐scale application for water splitting. Herein, tricomponent metal phosphides with hollow structures are synthesized from cobalt‐contained metal organic frameworks (MOFs), i.e., ZIF‐67, by tailoring the feeding ratios of Ni and Fe, followed by a high‐temperature reduction and a subsequent phosphidation process. Excellent OER activity and long‐time stability are achieved in 1 m NaOH aqueous solution, with an overpotential of 329 mV at 10 mA cm^?2 and Tafel slope of 48.2 mV dec^?1, even superior to the noble metal‐based catalyst. It is evidenced that the formed (oxyhydr)oxide/phosphate species by in situ electrochemical surface oxidation are responsible for active OER. Accordingly, the simultaneous introduction of external Ni and Fe elements significantly influences the electronic structures of the parent metal phosphides, leading to the in situ electrochemical formation of surface active layer with decreased OER activation energy for greatly improved water oxidation performance. This electronic structure tuning strategy by introducing multicomponent metals demonstrates a versatile method to use MOFs as precursors for synthesizing high‐efficient water splitting electrocatalysts.     

Support and Interface Effects in Water‐Splitting Electrocatalysts

Water‐splitting electrolyzers that can convert electricity into storable hydrogen are a fascinating and scalable energy conversion technology for the utilization of renewable energies. To speed up the sluggish hydrogen and oxygen evolution reactions (HER and OER), electrocatalysts are essential for reducing their kinetic energy barriers and eventually improving the energy conversion efficiency. As efficient strategies for modulating the binding ability of water‐splitting intermediates on electrocatalyst surface, the support effect and interface effect are drawing growing attention. Herein, some of the recent research progress on the support and interface effects in HER, OER, and overall water‐splitting electrocatalysts is highlighted. Specifically, the correlation between the electronic interaction of the constituent components and the electrocatalytic water‐splitting performance of electrocatalysts is profoundly discussed, with the aim of advancing the development of highly efficient water‐splitting electrocatalysts, which may eventually replace the noble‐metal‐based electrocatalysts and bring the practically widespread utilization of water‐splitting electrolyzers into a reality.     

Construction of Defect‐Rich Ni‐Fe‐Doped K0.23MnO2 Cubic Nanoflowers via Etching Prussian Blue Analogue for Efficient Overall Water Splitting

Designing elaborate nanostructures and engineering defects have been promising approaches to fabricate cost‐efficient electrocatalysts toward overall water splitting. In this work, a controllable Prussian‐blue‐analogue‐sacrificed strategy followed by an annealing process to harvest defect‐rich Ni‐Fe‐doped K_0.23MnO₂ cubic nanoflowers (Ni‐Fe‐K_0.23MnO₂ CNFs‐300) as highly active bifunctional catalysts for oxygen and hydrogen evolution reactions (OER and HER) is reported. Benefiting from many merits, including unique morphology, abundant defects, and doping effect, Ni‐Fe‐K_0.23MnO₂ CNFs‐300 shows the best electrocatalytic performances among currently reported Mn oxide‐based electrocatalysts. This catalyst affords low overpotentials of 270 (320) mV at 10 (100) mA cm^?2 for OER with a small Tafel slope of 42.3 mV dec^?1, while requiring overpotentials of 116 and 243 mV to attain 10 and 100 mA cm^?2 for HER respectively. Moreover, Ni‐Fe‐K_0.23MnO₂ CNFs‐300 applied to overall water splitting exhibits a low cell voltage of 1.62 V at 10 mA cm^?2 and excellent durability, even superior to the Pt/C||IrO₂ cell at large current density. Density functional theory calculations further confirm that doping Ni and Fe into the crystal lattice of δ‐MnO₂ can not only reinforce the conductivity but also reduces the adsorption free‐energy barriers on the active sites during OER and HER.