Light‐Powered Directional Nanofluidic Ion Transport in Kirigami‐Made Asymmetric Photonic‐Ionic Devices

Nacre‐mimetic 2D nanofluidic materials with densely packed sub‐nanometer‐height lamellar channels find widespread applications in water‐, energy‐, and environment‐related aspects by virtue of their scalable fabrication methods and exceptional transport properties. Recently, light‐powered nanofluidic ion transport in synthetic materials gained considerable attention for its remote, noninvasive, and active control of the membrane transport property using the energy of light. Toward practical application, a critical challenge is to overcome the dependence on inhomogeneous or site‐specific light illumination. Here, asymmetric photonic‐ionic devices based on kirigami‐tailored graphene oxide paper are fabricated, and directional nanofluidic ion transport properties therein powered by full‐area light illumination are demonstrated. The in‐plane asymmetry of the graphene oxide paper is essential to the generation of photoelectric driving force under homogeneous illumination. This light‐powered ion transport phenomenon is explained based on a modified carrier diffusion model. In asymmetric nanofluidic structures, enhanced recombination of photoexcited charge carriers at the membrane boundary breaks the electric potential balance in the horizontal direction, and thus drives the ion transport in that direction under symmetric illumination. The kirigami‐based strategy provides a facile and scalable way to fabricate paper‐like photonic‐ionic devices with arbitrary shapes, working as fundamental elements for large‐scale light‐harvesting nanofluidic circuits.     

Light‐Driven Active Proton Transport through Photoacid‐ and Photobase‐Doped Janus Graphene Oxide Membranes

Biological electrogenic systems use protein‐based ionic pumps to move salt ions uphill across a cell membrane to accumulate an ion concentration gradient from the equilibrium physiological environment. Toward high‐performance and robust artificial electric organs, attaining an antigradient ion transport mode by fully abiotic materials remains a great challenge. Herein, a light‐driven proton pump transport phenomenon through a Janus graphene oxide membrane (JGOM) is reported. The JGOM is fabricated by sequential deposition of graphene oxide (GO) nanosheets modified with photobase (BOH) and photoacid (HA) molecules. Upon ultraviolet light illumination, the generation of a net protonic photocurrent through the JGOM, from the HA‐GO to the BOH‐GO side, is observed. The directional proton flow can thus establish a transmembrane proton concentration gradient of up to 0.8 pH units mm^?2 membrane area at a proton transport rate of 3.0 mol h^?1 m^?2. Against a concentration gradient, antigradient proton transport can be achieved. The working principle is explained in terms of asymmetric surface charge polarization on HA‐GO and BOH‐GO multilayers triggered by photoisomerization reactions, and the consequent intramembrane proton concentration gradient. The implementation of membrane‐scale light‐harvesting 2D nanofluidic system that mimics the charge process of the bioelectric organs makes a straightforward step toward artificial electrogenic and photosynthetic applications.     

Tunable Polarity Behavior and Self‐Driven Photoswitching in p‐WSe2/n‐WS2 Heterojunctions

Van der Waals (vdW) p–n heterojunctions consisting of various 2D layer compounds are fascinating new artificial materials that can possess novel physics and functionalities enabling the next‐generation of electronics and optoelectronics devices. Here, it is reported that the WSe₂/WS₂ p–n heterojunctions perform novel electrical transport properties such as distinct rectifying, ambipolar, and hysteresis characteristics. Intriguingly, the novel tunable polarity transition along a route of n‐“anti‐bipolar”–p‐ambipolar is observed in the WSe₂/WS₂ heterojunctions owing to the successive work of conducting channels of junctions, p‐WSe₂ and n‐WS₂ on the electrical transport of the whole systems. The type‐II band alignment obtained from first principle calculations and built‐in potential in this vdW heterojunction can also facilitate the efficient electron–hole separation, thus enabling the significant photovoltaic effect and a much enhanced self‐driven photoswitching response in this system.     

Controlling Photoluminescence Enhancement and Energy Transfer in WS2:hBN:WS2 Vertical Stacks by Precise Interlayer Distances

2D semiconducting transition metal dichalcogenides (TMDs) are endowed with fascinating optical properties especially in their monolayer limit. Insulating hBN films possessing customizable thickness can act as a separation barrier to dictate the interactions between TMDs. In this work, vertical layered heterostructures (VLHs) of WS₂:hBN:WS₂ are fabricated utilizing chemical vapor deposition (CVD)‐grown materials, and the optical performance is evaluated through photoluminescence (PL) spectroscopy. Apart from the prohibited indirect optical transition due to the insertion of hBN spacers, the variation in the doping level of WS₂ drives energy transfer to arise from the layer with lower quantum efficiency to the other layer with higher quantum efficiency, whereby the total PL yield of the heterosystem is increased and the stack exhibits a higher PL intensity compared to the sum of those in the two WS₂ constituents. Such doping effects originate from the interfaces that WS₂ monolayers reside on and interact with. The electron density in the WS₂ is also controlled and subsequent modulation of PL in the heterostructure is demonstrated by applying back‐gated voltages. Other influential factors include the strain in WS₂ and temperature. Being able to tune the energy transfer in the VLHs may expand the development of photonic applications in 2D systems.     

Electrokinetic Energy Conversion in Self‐Assembled 2D Nanofluidic Channels with Janus Nanobuilding Blocks

Inspired by the microstructure of nacre, material design, and large‐scale integration of artificial nanofluidic devices step into a completely new stage, termed 2D nanofluidics, in which mass and charge transportation are confined in the interstitial space between reconstructed 2D nanomaterials. However, all the existing 2D nanofluidic systems are reconstituted from homogeneous nanobuilding blocks. Herein, this paper reports the bottom‐up construction of 2D nanofluidic materials with kaolinite‐based Janus nanobuilding blocks, and demonstrates two types of electrokinetic energy conversion through the network of 2D nanochannels. Being different from previous 2D nanofluidic systems, two distinct types of sub‐nanometer‐ and nanometer‐wide fluidic channels of about 6.8 and 13.8 Å are identified in the reconstructed kaolinite membranes (RKM), showing prominent surface‐governed ion transport behaviors and nearly perfect cation‐selectivity. The RKMs exhibit superior capability in osmotic and hydraulic energy conversion, compared to graphene‐based membranes. The mineral‐based 2D nanofluidic system opens up a new avenue to self‐assemble asymmetric 2D nanomaterials for energy, environmental, and healthcare applications.     

17% Efficient Organic Solar Cells Based on Liquid Exfoliated WS2 as a Replacement for PEDOT:PSS

The application of liquid‐exfoliated 2D transition metal disulfides (TMDs) as the hole transport layers (HTLs) in nonfullerene‐based organic solar cells is reported. It is shown that solution processing of few‐layer WS₂ or MoS₂ suspensions directly onto transparent indium tin oxide (ITO) electrodes changes their work function without the need for any further treatment. HTLs comprising WS₂ are found to exhibit higher uniformity on ITO than those of MoS₂ and consistently yield solar cells with superior power conversion efficiency (PCE), improved fill factor (FF), enhanced short‐circuit current (J_SC), and lower series resistance than devices based on poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) and MoS₂. Cells based on the ternary bulk‐heterojunction PBDB‐T‐2F:Y6:PC₇₁BM with WS₂ as the HTL exhibit the highest PCE of 17%, with an FF of 78%, open‐circuit voltage of 0.84 V, and a J_SC of 26 mA cm^?2. Analysis of the cells' optical and carrier recombination characteristics indicates that the enhanced performance is most likely attributed to a combination of favorable photonic structure and reduced bimolecular recombination losses in WS₂‐based cells. The achieved PCE is the highest reported to date for organic solar cells comprised of 2D charge transport interlayers and highlights the potential of TMDs as inexpensive HTLs for high‐efficiency organic photovoltaics.     

Edge‐Epitaxial Growth of 2D NbS2‐WS2 Lateral Metal‐Semiconductor Heterostructures

2D metal‐semiconductor heterostructures based on transition metal dichalcogenides (TMDs) are considered as intriguing building blocks for various fields, such as contact engineering and high‐frequency devices. Although, a series of p–n junctions utilizing semiconducting TMDs have been constructed hitherto, the realization of such a scheme using 2D metallic analogs has not been reported. Here, the synthesis of uniform monolayer metallic NbS₂ on sapphire substrate with domain size reaching to a millimeter scale via a facile chemical vapor deposition (CVD) route is demonstrated. More importantly, the epitaxial growth of NbS₂‐WS₂ lateral metal‐semiconductor heterostructures via a “two‐step” CVD method is realized. Both the lateral and vertical NbS₂‐WS₂ heterostructures are achieved here. Transmission electron microscopy studies reveal a clear chemical modulation with distinct interfaces. Raman and photoluminescence maps confirm the precisely controlled spatial modulation of the as‐grown NbS₂‐WS₂ heterostructures. The existence of the NbS₂‐WS₂ heterostructures is further manifested by electrical transport measurements. This work broadens the horizon of the in situ synthesis of TMD‐based heterostructures and enlightens the possibility of applications based on 2D metal‐semiconductor heterostructures.     

Universal Imaging of Full Strain Tensor in 2D Crystals with Third‐Harmonic Generation

Quantitatively mapping and monitoring the strain distribution in 2D materials is essential for their physical understanding and function engineering. Optical characterization methods are always appealing due to unique noninvasion and high‐throughput advantages. However, all currently available optical spectroscopic techniques have application limitation, e.g., photoluminescence spectroscopy is for direct‐bandgap semiconducting materials, Raman spectroscopy is for ones with Raman‐active and strain‐sensitive phonon modes, and second‐harmonic generation spectroscopy is only for noncentrosymmetric ones. Here, a universal methodology to measure the full strain tensor in any 2D crystalline material by polarization‐dependent third‐harmonic generation is reported. This technique utilizes the third‐order nonlinear optical response being a universal property in 2D crystals and the nonlinear susceptibility has a one‐to‐one correspondence to strain tensor via a photoelastic tensor. The photoelastic tensor of both a noncentrosymmetric D_3h WS₂ monolayer and a centrosymmetric D_3d WS₂ bilayer is successfully determined, and the strain tensor distribution in homogenously strained and randomly strained monolayer WS₂ is further mapped. In addition, an atlas of photoelastic tensors to monitor the strain distribution in 2D materials belonging to all 32 crystallographic point groups is provided. This universal characterization on strain tensor should facilitate new functionality designs and accelerate device applications in 2D‐materials‐based electronic, optoelectronic, and photovoltaic devices.     

Photothermal‐Responsive Microporous Nanosheets Confined Ionic Liquid for Efficient CO2 Separation

2D materials hold promising potential for novel gas separation. However, a lack of in‐plane pores and the randomly stacked interplane channels of these membranes still hinder their separation performance. In this work, ferrocene based‐MOFs (Zr‐Fc MOF) nanosheets, which contain abundant of in‐plane micropores, are synthesized as porous supports to fabricate Zr‐Fc MOF supported ionic liquid membrane (Zr‐Fc‐SILM) for highly efficient CO₂ separation. The micropores of Zr‐Fc MOF nanosheets not only provide extra paths for CO₂ transportation, and thus increase its permeance up to 145.15 GPU, but also endow the Zr‐Fc‐SILM with high selectivity (216.9) of CO₂/N₂ through the nanoconfinement effect, which is almost ten times higher than common porous polymer SILM. Furthermore, based on the photothermal‐responsive properties of Zr‐Fc MOF, the performance is further enhanced (35%) by light irradiation through a photothermal heating process. This provides a brand new way to design light facilitating gas separation membranes.     

Photonic band gap in 1D multilayers made by alternating SiO2 or PMMA with MoS2 or WS2 monolayers

Atomically thin molybdenum disulfide (MoS₂) and tungsten disulfide (WS₂) are very interesting two dimensional materials for optics and electronics. In this work we show the possibility to obtain one-dimensional photonic crystals consisting of low-cost and easy processable materials, as silicon dioxide (SiO₂) or poly methyl methacrylate (PMMA), and of MoS₂ or WS₂ monolayers. We have simulated the transmission spectra of the photonic crystals using the transfer matrix method and employing the wavelength dependent refractive indexes of the materials. This study envisages the experimental fabrication of these new types of photonic crystals for photonic and light emission applications.     

Lateral Graphene‐Contacted Vertically Stacked WS2/MoS2 Hybrid Photodetectors with Large Gain

A demonstration is presented of how significant improvements in all‐2D photodetectors can be achieved by exploiting the type‐II band alignment of vertically stacked WS₂/MoS₂ semiconducting heterobilayers and finite density of states of graphene electrodes. The photoresponsivity of WS₂/MoS₂ heterobilayer devices is increased by more than an order of magnitude compared to homobilayer devices and two orders of magnitude compared to monolayer devices of WS₂ and MoS₂, reaching 10³ A W^?1 under an illumination power density of 1.7 × 10² mW cm^?2. The massive improvement in performance is due to the strong Coulomb interaction between WS₂ and MoS₂ layers. The efficient charge transfer at the WS₂/MoS₂ heterointerface and long trapping time of photogenerated charges contribute to the observed large photoconductive gain of ≈3 × 10⁴. Laterally spaced graphene electrodes with vertically stacked 2D van der Waals heterostructures are employed for making high‐performing ultrathin photodetectors.     

Fast and Highly Sensitive Ionic‐Polymer‐Gated WS2–Graphene Photodetectors

The combination of graphene with semiconductor materials in heterostructure photodetectors enables amplified detection of femtowatt light signals using micrometer‐scale electronic devices. Presently, long‐lived charge traps limit the speed of such detectors, and impractical strategies, e.g., the use of large gate‐voltage pulses, have been employed to achieve bandwidths suitable for applications such as video‐frame‐rate imaging. Here, atomically thin graphene–WS₂ heterostructure photodetectors encapsulated in an ionic polymer are reported, which are uniquely able to operate at bandwidths up to 1.5 kHz whilst maintaining internal gain as large as 10⁶. Highly mobile ions and the nanometer‐scale Debye length of the ionic polymer are used to screen charge traps and tune the Fermi level of the graphene over an unprecedented range at the interface with WS₂. Responsivity R = 10⁶ A W^?1 and detectivity D* = 3.8 × 10¹¹ Jones are observed, approaching that of single‐photon counters. The combination of both high responsivity and fast response times makes these photodetectors suitable for video‐frame‐rate imaging applications.     

Modulating the Charge Transport in 2D Semiconductors via Energy‐Level Phototuning

The controlled functionalization of semiconducting 2D materials (2DMs) with photoresponsive molecules enables the generation of novel hybrid structures as active components for the fabrication of high‐performance multifunctional field‐effect transistors (FETs) and memories. This study reports the realization of optically switchable FETs by decorating the surface of the semiconducting 2DMs such as WSe₂ and black phosphorus with suitably designed diarylethene (DAE) molecules to modulate their electron and hole transport, respectively, without sacrificing their pristine electrical performance. The efficient and reversible photochemical isomerization of the DAEs between the open and the closed isomer, featuring different energy levels, makes it possible to generate photoswitchable charge trapping levels, resulting in the tuning of charge transport through the 2DMs by alternating illumination with UV and visible light. The device reveals excellent data‐retention capacity combined with multiple and well‐distinguished accessible current levels, paving the way for its use as an active element in multilevel memories.     

Interface‐Driven Partial Dislocation Formation in 2D Heterostructures

Van der Waals (vdW) epitaxy allows the fabrication of various heterostructures with dramatically released lattice matching conditions. This study demonstrates interface‐driven stacking boundaries in WS₂ using epitaxially grown tungsten disulfide (WS₂) on wrinkled graphene. Graphene wrinkles function as highly reactive nucleation sites on WS₂ epilayers; however, they impede lateral growth and induce additional stress in the epilayer due to anisotropic friction. Moreover, partial dislocation‐driven in‐plane strain facilitates out‐of‐plane buckling with a height of 1 nm to release in‐plane strain. Remarkably, in‐plane strain relaxation at partial dislocations restores the bandgap to that of monolayer WS₂ due to reduced interlayer interaction. These findings clarify significant substrate morphology effects even in vdW epitaxy and are potentially useful for various applications involving modifying optical and electronic properties by manipulating extended 1D defects via substrate morphology control.     

Wafer‐Scale and Low‐Temperature Growth of 1T‐WS2 Film for Efficient and Stable Hydrogen Evolution Reaction

The metallic 1T phase of WS₂ (1T‐WS₂), which boosts the charge transfer between the electron source and active edge sites, can be used as an efficient electrocatalyst for the hydrogen evolution reaction (HER). As the semiconductor 2H phase of WS₂ (2H‐WS₂) is inherently stable, methods for synthesizing 1T‐WS₂ are limited and complicated. Herein, a uniform wafer‐scale 1T‐WS₂ film is prepared using a plasma‐enhanced chemical vapor deposition (PE‐CVD) system. The growth temperature is maintained at 150 °C enabling the direct synthesis of 1T‐WS₂ films on both rigid dielectric and flexible polymer substrates. Both the crystallinity and number of layers of the as‐grown 1T‐WS₂ are verified by various spectroscopic and microscopic analyses. A distorted 1T structure with a 2a₀ × a₀ superlattice is observed using scanning transmission electron microscopy. An electrochemical analysis of the 1T‐WS₂ film demonstrates its similar catalytic activity and high durability as compared to those of previously reported untreated and planar 1T‐WS₂ films synthesized with CVD and hydrothermal methods. The 1T‐WS₂ does not transform to stable 2H‐WS₂, even after a 700 h exposure to harsh catalytic conditions and 1000 cycles of HERs. This synthetic strategy can provide a facile method to synthesize uniform 1T‐phase 2D materials for electrocatalysis applications.     

Engineering 2D Aligned Nanowires Assembled Porous Hetero-Membrane for Smart Ion Transport

Engineering 2D nanosheets with well-defined porous structures and their assembled heterostructure membrane is a promising method to improve osmotic energy conversion. However, it is still a great challenge to directly fabricate 2D nanosheets with regular parallel nanochannels in aqueous media. Here, the desired functional nanosheets and heterostructure membrane device are successfully prepared through a simple interfacial assembly strategy. In this method, monolayer cylindrical monomicelles closely arrange and assemble on the surfaces of graphene oxide, and the resulting nanosheets with monolayered aligned nanowire polymer arrays parallel to the substrate surfaces are then obtained. Subsequently, a heterostructured membrane is constructed by assembling these 2D nanosheets on macroporous alumina. The nanofluidic membrane device with asymmetric geometry and charge polarity exhibits smart ion transport properties, and the output osmotic power density is ≈1.22 and 1.63 times over the reported pure 2D graphene oxide and biomass-derived membranes, respectively. In addition, theoretical calculations are carried out to reveal the mechanisms for ion selectivity and salinity gradient energy conversion. This monolayered interfacial assembly approach can open up new avenues for the synthesis of functional porous low-dimensional nanomaterials and membrane devices, and expand the palette of materials selection for many applications.     

3D Porous Hydrogel/Conducting Polymer Heterogeneous Membranes with Electro‐/pH‐Modulated Ionic Rectification

Heterogeneous membranes composed of asymmetric structures or compositions have enormous potential in sensors, molecular sieves, and energy devices due to their unique ion transport properties such as ionic current rectification and ion selectivity. So far, heterogeneous membranes with 1D nanopores have been extensively studied. However, asymmetric structures with 3D micro‐/nanoscale pore networks have never been investigated. Here, a simple and versatile approach to low‐costly fabricate hydrogel/conducting polymer asymmetric heterogeneous membranes with electro‐/pH‐responsive 3D micro‐/nanoscale ion channels is introduced. Due to the asymmetric heterojunctions between positively charged nanoporous polypyrrole (PPy) and negatively charged microscale porous hydrogel poly (acrylamide‐co‐acrylic acid) (P(AAm‐co‐AA)), the membrane can rectify ion transmembrane transport in response to both electro‐ and pH‐stimuli. Numerical simulations based on coupled Poisson and Nernst–Plank equations are carried out to explain the ionic rectification mechanisms for the membranes. The membranes are not dependent on elaborately fabricated 1D ion channel substrates and hence can be facilely prepared in a low‐cost and large‐area way. The hybridization of hydrogel and conducting polymer offers a novel strategy for constructing low‐cost, large‐area and multifunctional membranes, expanding the tunable ionic rectification properties into macroscopic membranes with micro‐/nanoscale pores, which would stimulate practical applications of the membranes.     

Engineering 2D Nanofluidic Li‐Ion Transport Channels for Superior Electrochemical Energy Storage

Rational surface engineering of 2D nanoarchitectures‐based electrode materials is crucial as it may enable fast ion transport, abundant‐surface‐controlled energy storage, long‐term structural integrity, and high‐rate cycling performance. Here we developed the stacked ultrathin Co₃O₄ nanosheets with surface functionalization (SUCNs‐SF) converted from layered hydroxides with inheritance of included anion groups (OH^?, NO₃^?, CO₃^2?). Such stacked structure establishes 2D nanofluidic channels offering extra lithium storage sites, accelerated Li‐ion transport, and sufficient buffering space for volume change during electrochemical processes. Tested as an anode material, this unique nanoarchitecture delivers high specific capacity (1230 and 1011 mAh g^?1 at 0.2 and 1 A g^?1, respectively), excellent rate performance, and long cycle capability (1500 cycles at 5 A g^?1). The demonstrated advantageous features by constructing 2D nanochannels in nonlayered materials may open up possibilities for designing high‐power lithium ion batteries.     

Monolayer Tungsten Disulfide (WS2) via Chlorine‐Driven Chemical Vapor Transport

Large‐scale production of high‐quality tungsten disulfide (WS₂) monolayers is a prerequisite for potential device applications using this promising transition metal dichalcogenide semiconductor. The most researched technique is chemical vapor deposition, typically involving the reaction of sulfur vapors with tungsten oxide. Other techniques such as physical vapor deposition have been explored with some success, but low vapor pressures make growth difficult. This study demonstrates a growth process that relies on halide‐driven vapor transport commonly utilized in bulk crystal growth. Using a small amount of sodium chloride salt as a source of chlorine, nonvolatile WS₂ can react to form gaseous tungsten chloride and sulfur. With an open tube system, a controlled reaction generates mono and few‐layer WS₂ crystals. Optical and physical characterization of the monolayer material shows good uniformity and triangular domains over 50 µm in length. Photoluminescence transient measurements show similar nonlinear exciton dynamics as exfoliated flakes, attributed to multiparticle physics. Requiring only the powder of the desired crystal and appropriate halide salt as precursors, the technique has the potential to realize other layered materials that are challenging to grow with current processes.     

Light‐Emitting Transition Metal Dichalcogenide Monolayers under Cellular Digestion

2D materials cover a wide spectrum of electronic properties. Their applications are extended from electronic, optical, and chemical to biological. In terms of biomedical uses of 2D materials, the interactions between living cells and 2D materials are of paramount importance. However, biointerfacial studies are still in their infancy. This work studies how living organisms interact with transition metal dichalcogenide monolayers. For the first time, cellular digestion of tungsten disulfide (WS₂) monolayers is observed. After digestion, cells intake WS₂ and become fluorescent. In addition, these light‐emitting cells are not only viable, but also able to pass fluorescent signals to their progeny cells after cell division. By combining synthesis of 2D materials and a cell culturing technique, a procedure for monitoring the interactions between WS₂ monolayers and cells is developed. These observations open up new avenues for developing novel cellular labeling and imaging approaches, thus triggering further studies on interactions between 2D materials and living organisms.