The epidemiology of Neisseria gonorrhoeae isolates in Greenland 1979-1990: the emergence, spread and disappearance of non-PPNG strains carrying the conjugative 38.9 kb plasmid

The aim of this study was to compare the clinical performance of an amalgam, a glass polyalkenoate (ionomer) cerment material and a resin-based composite material used in small Class II cavities in permanent teeth. All restorations were inserted under rubber dam. They were examined yearly for 3 years. One clinician continued the study up to 5 years. The clinical examination focused on two criteria: clinically acceptable and failure. In addition, impressions were taken of the prepared cavities immediately before restoration and at each clinical examination using an elastomeric material. The study comprised 274 Class II restorations (88 amalgams, 95 cerments and 91 resin composites) placed in 142 adolescent patients. One hundred and sixty-seven restorations were in molar and 107 in premolar teeth. Patient dropout after 5 years resulted in the loss of 161 restorations, evenly distributed for restorative material and type of tooth involved. Four amalgam restorations, 22 glass ionomer cerment and nine resin composite restorations failed. The glass ionomer cerment and amalgam restorations failed primarily due to bulk fractures, while the resin composite restorations failed due to secondary caries and bulk fractures.     

Increased apoptotic cells in bone marrow biopsies from patients with aplastic anaemia

PURPOSE: To evaluate the 2-year clinical performance of two polyacid-modified resin composites and two resin-modified glass ionomers in Class V carious cavities. MATERIALS AND METHODS: A total of 120 Class V cavities were selected and 30 cavities were restored with one of two resin-modified glass ionomer materials (Fuji II LC Improved and Vitremer) and two polyacid-modified resin composites (Dyract and Compoglass) in Class V carious cavities after 2 years. The restorations were clinically evaluated after 1 and 2 years using the USPHS criteria. RESULTS: One-year findings revealed a significant difference in color match between Vitremer and other materials (P < 0.05) and no significant difference was found for the other criteria. Two-year results indicated a significant difference between resin-modified glass ionomers and polyacid-modified resin composite materials. The difference between Compoglass and Dyract was not statistically significant whereas the difference between Vitremer and Fuji II LC was statistically significant. Caries was not recorded at any evaluation period.     

Marginal leakage of amalgam restorations pretreated with various liners

PURPOSE: To evaluate and compare the microleakage of amalgam restorations lined with four different liners. MATERIALS AND METHODS: Cylindrical occlusal cavities were prepared in extracted human molars and the teeth were then divided into four groups and lined with one of four liners: Amalcoden, AM (glass-metal ionomer), FujiDuet, FD (glass ionomer), Amalgambond, AB (adhesive resin), or copal varnish, CV. Each cavity was then restored with a high-copper amalgam alloy and aged for 7 days in 37 degrees C distilled water. The specimens were then thermocycled for 300 cycles followed by immersion in 0.5% basic fuchsin dye solution for 24 hours. The teeth were then embedded in resin, sectioned, and dye penetration at the tooth/amalgam interface evaluated microscopically at x 100 and scored from 0 to 4 (0 = no leakage and 4 = greatest leakage). RESULTS: The median values were: AM = 1.0; FD = 0.5; AB = 1.1; and CV = 4.0. Statistical analysis using Kruskal-Wallis and Mann-Whitney U indicated no significant differences between AM and AB or FD and AB. CV was however, significantly worse at P < 0.01.     

Prevalence and depth of artificial caries-like lesions adjacent to cavities prepared in roots and restored with a glass ionomer or a dentin-bonded composite material

One potential advantage of glass-ionomer materials for the treatment of root caries is their ability to release fluoride and so resist cariogenic attack. A commercially available composite material has also been reported to release fluoride which reduced caries lesions in the tooth tissue adjacent to it. The aim of this study was to assess the effectiveness of a conventional glass-ionomer restoration compared with a dentin-bonded, fluoride-releasing, composite restoration when exposed to a microbial artificial caries system. Artificial caries-like lesions produced in relation to the restorations were examined and classified either as outer (surface) lesions or as wall lesions. A split-unit experimental design allowed for within-tooth comparisons of the 2 experimental restorations at different sites on the root surface. These were either totally within the root surface or positioned at the amelo-cemental junction. Outer lesion depths were significantly (p < 0.001) shallower at all sites adjacent to the glass ionomer when compared with the composite restorations. Wall lesions were significantly (p < 0.01) more prevalent adjacent to the composite material. In addition, the cavity margin position significantly (p < 0.05) affected the incidence of wall lesions, particularly in the composite group. In conclusion, glass ionomer was successful in reducing the caries-like lesion production in the adjacent root surface. This resulted from improved marginal integrity and fluoride release from this material when compared with the composite bonding system used.     

Dietary amino acids as new and novel agents to enhance allograft survival

Little is known about the long-term effects of fluoride-releasing materials on carious dentine in vivo. The aim was to investigate the 2-year influence of a resin-modified glass ionomer cement (RM-GIC) and amalgam on the bacteriological counts of carious dentine that remained under class I restorations. To enable a split-mouth design, 33 molar pairs in 33 patients (mean age 15.1 years, SD 1.4) were selected, based on clinically and radiographically diagnosed occlusal dentine caries. The enamel of the carious molars was removed, and the carious dentine was sampled under aseptic conditions just beneath the dentinoenamel junction. The molars were alternately restored with RM-GIC or amalgam without further removal of carious dentine. The samples were processed for microbiological determination of total viable counts (TVC), mutans streptococci (MS), and lactobacilli (LB). The molar pairs of 25 patients were reevaluated after 2 years using the same clinical techniques and were permanently restored after complete caries removal. Both materials showed a substantial decrease in numbers of TVC and LB of the carious dentine after the 2-year period. Compared to amalgam, the decrease in the numbers of LB was significantly more pronounced for RM-GIC. No microorganisms were detected in only 11 molars (6 RM-GIC and 5 amalgam) after the 2-year period. Based on this study, we suggest that complete removal of carious dentine is still the best conservative treatment, irrespective of the restorative material used.     

Artificial caries formation around fluoride-releasing restorations in roots

Secondary caries is one of the most important factors leading to replacement of dental restorations. This investigation assessed the capacity of fluoride-releasing restorative materials to resist caries in vitro when used in roots. Class 5 cavities were prepared in the buccal and lingual surfaces of 30 extracted premolars. The six materials used were: glass-ionomer cement (Fuji), glass-ionomer cement with silver particles added (Ketac-silver), fluoride-containing composite resin (Tetric), composite resin (Silux plus), fluoride-containing amalgam (Fluor-Alloy) and high-copper amalgam (Dispersalloy). After 5 weeks in an acid gel for caries-like lesion formation, the teeth were sectioned longitudinally and examined with polarized light. The results showed that repair with glass-ionomer materials of a carious lesion may be of great importance in the prevention of secondary caries around the restorations in roots.     

Low-frequency ultrasound treatment of chronic venous leg ulcers in an outpatient therapy

An in vitro dye leakage study was performed to compare the sealing ability of glass ionomer, composite resin and glass ionomer/resin cement when used as restorative materials for G.V. Black class V cavities. In this research, standard Class V cavities were prepared in sound premolar teeth extracted for orthodontic reasons. The cavities were randomly divided into 3 groups. After filling the cavities with glass ionomer cement, composite resin and light curing glass ionomer/resin cement, the specimens were immersed in silver nitrate solution. Marginal microleakage at the interface between the cavity wall and restoration was evaluated. The results were analyzed by using Kruskal-Wallis and Mann Whitney U tests. Result of this in vitro study indicate that composite resin and glass ionomer/resin cement provide a better seal than glass ionomer cement.     

Ultrastructural evaluation following catheterization of the fallopian tube with a hysteroscopic catheter

PURPOSE: The purpose of this study was to determine the in vitro effects of a resin-modified glass-ionomer restorative material on human enamel. METHODS: Enamel specimens were restored with Photac-Fil, a resin-modified glass ionomer; Ketac-Fil, an autopolymerizing glass ionomer and silver amalgam. The samples were pH cycled and then subjected to an artificial caries challenge. Specimens were evaluated by fluoride microdrill biopsy and quantitative microradiography at 1, 2, and 3 mm from restorations. Data on fluoride content, lesion depth, and mineral content were analyzed by one-way ANOVA, Student's t test, Neuman-Keuls procedure (multiple [pairwise] comparison), and Pearson's product-moment correlation tests. RESULTS: There were significant differences in fluoride uptake, lesion depth, and mineral density between groups. Significant correlational relationships were also determined. CONCLUSION: This study demonstrates that Photac-Fil and Ketac-Fil prevent in-vitro demineralization of enamel and suggests different mechanisms of action for each material.     

Strength of core build-up materials in endodontically treated teeth

PURPOSE: To compare the in vitro strength of a reinforced glass ionomer and a light-cured glass ionomer used as an alternative to amalgam in core construction to restore endodontically treated mandibular molar teeth. MATERIALS AND METHODS: The root canals of 120 extracted human mandibular molar teeth were prepared chemomechanically and obturated with laterally condensed cold gutta-percha. The crown of each tooth was sectioned leaving only one cusp standing. Gutta-percha was removed from the pulp chamber in all teeth. The volume of the pulp chamber was measured and the teeth ranked in ascending order of chamber volume. The specimens were divided into six groups of 20, allocating teeth with similar chamber volumes into each group. In three of the groups, gutta-percha was removed from the coronal 3-4 mm of each root canal. The teeth were restored with one of three materials, a cermet cement (Ketac-Silver), a resin-reinforced glass ionomer (Vitremer), or amalgam (Contour). Core preparation was carried out after 48 hours, reducing each core height to 6 mm. The specimens were thermocycled for 24 hours and then mounted in dental stone. A control group of 20 unrestored human mandibular molars was mounted in cold cure acrylic. Each tooth was tested in a Nene machine with a compressive load applied at 90 degrees to the occlusal surface at a crosshead speed of 5 mm/minute. RESULTS: There was no statistically significant difference between the experimental groups (P > 0.05), but the control group was significantly stronger (P < 0.001). Extension of core material into the coronal root canal system did not increase the fracture resistance of any of the experimental materials. Regression analysis of the results revealed no correlation between the volume of the pulp chamber and the load to fracture.     

Protocols for the care of external fixator pin sites

The pre-cooperative or handicapped child with decay presents a special challenge to the practitioner and may require sedation or general anesthesia. Treatment with an interim restoration may delay treatment until the child is more mature and can accept dental treatment and is a more conservative approach than sedation, extractions or general anesthesia. Glass ionomer materials have been utilized for this application, but little is known about their retention to carious dentin. The purpose of this study was to determine whether the presence of artificial dentin decay will affect the shear bond strength of two light-cured glass ionomer materials. VariGlass and Vitrebond glass ionomer materials were attached to carious and non-carious primary dentin surfaces and bond strengths determined. There were no significant differences in shear bond strengths between the decayed and non-decayed surfaces [p < or = .001]. VariGlass had higher shear bond strengths than Vitrebond only after a pre-treatment with the PAA containing liquid. Pre-treatment with the liquid provided with each light-cured glass ionomer was beneficial in all instances except for Vitrebond on non-decayed surfaces.     

Pulp response in primary teeth with deep residual caries treated with silver fluoride and glass ionomer cement ('atraumatic' technique)

Histological assessment of the dental pulps of 55 carious primary teeth was carried out 3 to 58 months after treatment by the 'atraumatic' technique involving application of 40 per cent silver fluoride to residual caries followed by restoration with glass ionomer cement. Fifty of the 55 teeth examined showed a favourable pulpal response, inducing presence of abundant reparative dentine and a wide odontoblast layer. Histological comparisons were made between these teeth and others not treated with silver fluoride but restored with glass ionomer cement, amalgam or zinc oxide and eugenol. Possible mechanisms of the action of silver fluoride in arresting residual caries are discussed. The question of whether or not treatment of carious dentine with silver fluoride represents a biologically acceptable clinical procedure cannot be answered on the basis of pulpal histology alone. The very high concentration of fluoride in commercial preparations of silver fluoride raises several questions concerning its clinical safety.     

Resin-modified glass ionomers for luting posterior ceramic restorations

OBJECTIVES: Until recently, esthetic inlay restorations in posterior teeth have been limited to cavities surrounded by enamel. Dentin adhesive systems in combination with luting composites and light-cured resin-modified glass ionomer cements offer a possibility for bonding ceramic inlays to cavities when the cervical margin is in dentin. This study was designed to compare in vitro marginal integrity of ceramic inlays bonded to dentin to restorations placed in cavities with margins located entirely in the enamel. METHODS: In the present in vitro study, the sealing abilities of a dentin bonding agent/luting composite combination (Syntac/Dual Cement, Vivadent) and resin-modified glass ionomers (Photac Fil, Photac Bond, ESPE; Dyract, De Trey Dentsply; Fuji II LC, GC Dental Industrial Corp.; and Vitremer, 3M Dental Products) used as luting agents in cavities extending beyond the cemento-enamel junction, were compared to the sealing abilities of a conventional luting composite (Vita Cerec Duo Cement, Vita) in cavities within sound enamel. SEM analysis and dye penetration were performed to evaluate marginal integrity at the cervical cavity margins. RESULTS: The dentin bonding agent/luting composite combination (Syntac/Dual Cement) rendered a marginal seal within the dentin similar to the quality obtained with the conventional luting procedures within sound enamel. When three out of the five resin-modified glass ionomers were used as luting agents (Dyract, Fuji II LC and Vitremer), the results were comparable to those reported for the dentin bonding agents and the conventional method. SIGNIFICANCE: Light-cured resin-modified glass ionomer cements may be considered as an alternative to dentin bonding agents when the cavity margins of ceramic inlay restorations are within the dentin. However, further studies, e.g., wear resistance, must be performed.     

Marginal adaptation of resin-bonded light-cured glass ionomers in dentin cavities

PURPOSE: To investigate the marginal adaptation of resin-modified glass ionomer cements in dentin cavities placed with or without additional application of resin bonding systems. MATERIALS AND METHODS: Three resin-modified materials (Fuji II LC, Photac-Fil, Vitremer), one compomer (Dyract) and as reference an adhesively bonded resin composite system (Gluma CPS-Pekafill) were used. Flat peripheral dentin surfaces on human molar teeth were produced by wet grinding on SiC paper. Cylindrical cavities, 3.5 mm wide, were prepared in these dentin areas and restored with the individual materials. Sixty cavities were pretreated and restored as requested by the respective manufacturers. Following water storage of the specimens for 15 minutes or 24 hours, excess was gently removed by wet grinding for microscopic inspection of the marginal area. Additionally, in 30 cavities an experimental one-component adhesive resin system, a proprietary dimethacrylate and HEMA mixture dissolved in acetone, was combined with each of the restoratives for evaluation after 15-minutes water storage. Finally, in six cavities each, Dyract was combined with Prime and Bond 2.0, and Vitremer with Scotchbond Multi-Purpose Plus for assessment after 15 minutes. Maximum marginal gap widths (MGW) were measured. One-way ANOVA by ranks (Kruskal-Wallis-Test) followed by Wilcoxon's Two-Sample test were used to study the statistical difference of MGW among the treatment groups at a rejection level P = 0.05. RESULTS: Neither the conventionally placed material systems nor the restorations in combination with adhesives showed consistently gap-free margins after 15-minute water storage. After 24-hour storage with Vitremer 4 of the 6 restorations were gap-free, whereas with all other materials only perfect margins were registered. There was, however, no significant difference between the groups. Application of the experimental and/or the specific resin bonding agents had no effect on early MGW except for the Photac-Fil group, which was significantly reduced.     

Hematological changes in infectious diseases. Hematological consequences of bacterial, protozoal and spirochetal infections (2)

Thirty-six Class V amalgam restorations were placed in 29 patients. Prior to insertion of the amalgam in 12 cavities the walls were treated with Amalgam Liner and in another 12 cavities with Copalite. The remaining 12 cavities were not treated before amalgam insertion. The margin quality was determined quantitatively with the SEM using replicas obtained immediately after the polishing of the restorations and 6 months later. At baseline the cavities treated with Copalite showed a margin quality identical to the untreated cavities. Cavities treated with Amalgam Liner showed an inferior margin quality. After 6 months the margin quality of the three groups showed no statistical differences. With neither of the liners tested was it possible to improve the margin quality of amalgam restorations.     

Arrest of root surface caries in situ

This study tests the hypothesis that daily oral hygiene combined with topical fluoride arrests active root-surface caries lesions without changing the mineral content of the lesions. Therefore, changes in mineral content and distribution were studied in root surfaces during caries lesion development and subsequent arrest of lesion progression in situ. In 18 subjects, lesions were developed during 3 months in sound root-surface specimens inserted into lower partial dentures. After 3 months, ground sections were prepared from each lesion prior to re-insertion of the specimens into the dentures. In addition, one sound root specimen was added per subject. During the following 3 months, half of the subjects cleaned both sound and carious specimens once a day with an 1100-ppm fluoride toothpaste, and the specimens were treated twice with 2% NaF for 2 min in situ. The other half of the subjects continued the experiment without cleaning. During the initial three-month period, all specimens developed subsurface lesions extending 187 to 583 microm into the dentin. Lesion depth increased somewhat in both experimental groups during the following 3 months (P > or = 0.1). There was a non-significant increase in mineral loss in the plaque-covered specimens (P = 0.08). However, the total mineral content of specimens subjected to plaque removal and topical fluoride did not change. This treatment resulted in an increased mineral content in the surface layer (P < 0.01) and formation of a zone of higher mineral content within the body of the lesion. The sound root surfaces which had been cleaned for a three-month period showed mineral uptake in the surface layer, occasionally associated with subsurface demineralization extending 20 to 70 microm into the tissue. The mineral loss of these specimens was significantly smaller than that of plaque-covered surfaces (P < 0.001). It is concluded that daily plaque removal and topical fluoride use influence the distribution of mineral in sound and carious root surfaces and may arrest lesion progression without affecting the total mineral content.     

Insulin effects on ouabain binding in A6 renal cells

OBJECTIVES: This study sought to identify risk markers associated with the provision of new restorations in children and to investigate whether the carious status of a tooth surface is associated with the restorative decisions of dentists. METHODS: A total of 911 schoolchildren in grades one, two, and three were randomly selected from the island of Montreal, Quebec, Canada. Dental examinations were carried out in 1990, 1991, and 1992. Tooth surfaces of first permanent molars were classified as sound, noncavitated, and cavitated. The carious status of a tooth was matched with restorative decisions reported to the insurance board. RESULTS: The presence of a carious cavity was a strong risk marker for placement of new restorations (odds rations > or = 4.11). After one year, less than 2 percent of sound tooth surfaces of first permanent molars were restored and about 21 percent of noncavitated tooth surfaces were restored. When new class I restorations placed in maxillary first permanent molars within 3-6 months after the baseline examination were evaluated, we found that between 73 percent and 86 percent of these new restorations were placed in sound or noncavitated tooth surfaces. A similar trend also was observed in mandibular first permanent molars. Poor agreement between epidemiologic diagnosis and restorative decisions was found. The restorative profile of dentists was a significant risk marker for placement of new restorations. CONCLUSION: The majority of new restorations in first permanent molars were placed in sound and noncavitated tooth surfaces because of the ubiquitous prevalence of these tooth surfaces and the validity problems of current caries diagnosis methods.     

Cholesterol 7 alpha-hydroxylase activity in hypothyroidism and hyperthyroidism in humans

The effects of three root-end filling materials on healing following endodontic surgery were assessed radiologically and correlated with histological findings reported elsewhere. The materials compared were a light-cured glass ionomer cement (Vitrebond), a reinforced zinc oxide-eugenol cement (Kalzinol) and amalgam. The root canals of 27 two-rooted mandibular premolar teeth of six beagle dogs were inoculated with endodontic pathogenic bacteria to induce periradicular lesions. The roots were apicected and root-end cavities filled with the tested filling materials. The teeth and surrounding jaw were removed after 4 weeks (30 roots) or 8 weeks (24 roots). Radiographs were taken of each jaw section and subjected to image analysis. Healing was evaluated based on measurements of the size of the periradicular radiolucent areas. ANOVA disclosed no statistically significant differences in the size of the periradicular areas either between time periods or between materials. These results did not correlate with the tissue responses in the same material as assessed histologically and previously reported. The use of radiographs alone to assess healing after endodontic surgery in the dog mandible is unsatisfactory, and should not be regarded as a substitute for histological examination for the determination of healing.     

Health personnel and viral hepatitis

The cytotoxicity of restorative dental materials must be investigated to ensure a safe biological response. The MTS assay, a valid and reliable measure of cell viability based on the mitochondrial activity of cultured cells, was used to evaluate the affects on human periodontal ligament (PDL) cells of two resin-modified glass ionomer cements (R-M GICs) (Fuji Duet and Fuji II LC, GC America, Chicago, IL) and one dental amalgam (Contour, Caulk, York, PA)-all suggested materials for root perforation repair. Twelve 4 x 6 mm cylinders of each material were fabricated and placed in 5 ml of alpha-minimum essential medium supplemented with 100 micrograms/ml of penicillin, 50 micrograms/ml of gentamicin, and 5% fetal bovine serum for 24, 48, and 72 h (n = 3). One hundred microliters of eluate was transferred to triplicate wells containing PDL cells previously plated at a density of 10,000 cells/well in a 96-well plate, and incubated for 24 h at 37 degrees C with 5% carbon dioxide. alpha-Minimum essential medium with supplements provided baseline data. Optical density at 490 nm, directly proportional to the number of viable cells, was determined according to manufacturer instructions. Analysis of variance was used to detect differences between treatments and Tukey's HSD (p < 0.05) to detect for differences between group means. Results demonstrated that both material and time affected cell viability (p < 0.0001), with amalgam eluate significantly inhibitory on cell viability at 24 h, compared with control and the two other tested materials. At 48 and 72 h, all three materials exhibited a similar slightly inhibitory effect on the cell viability. Use of resin-modified glass ionomer cement as a root perforation repair material initially (< 24 h) may result in a more favorable response by PDL cells than the tested dental amalgam.     

Short-term tissue response to potential root-end filling materials in infected root canals

The short-term tissue responses to two potential root-end filling materials, a light-cured glass ionomer cement (Vitrebond) and a reinforced zinc oxide-eugenol cement (Kalzinol), were compared with that to amalgam using a previously devised experimental model. In 24 premolar teeth of beagle dogs (47 roots), a collection of endodontic pathogenic bacteria was first inoculated into the root canals to induce periradicular lesions. On each root, an apicoectomy was performed and root-end cavities prepared to receive fillings of each material. The teeth and surrounding jaw were removed after 2 weeks (23 roots) and 1 week (24 roots); they were then prepared for histological examination. The tissue response to amalgam fillings after 2 weeks and 1 week was marked by moderate or severe inflammation on all roots, and extended to < or = 0.5 mm or > 0.5 mm in 15 out of 16 roots. In contrast, after 2 weeks, the majority of roots filled with Kalzinol showed little or moderate inflammation, while the tissue response to Vitrebond was the best of the three materials, and was also the least extensive. After 1 week, the overall best tissue response was with Vitrebond, followed by Kalzinol. The differences between materials for both time periods with either none or few inflammatory cells when compared with that with either moderate or severe inflammation were not statistically significant (P < 0.02). However, the differences between materials for both time periods with no inflammation or inflammation extending < 0.2 mm when compared with that with inflammation extending > 0.2 mm (< or = 0.5 mm or > 0.5 mm) were statistically significant (P < 0.01). Apart from amalgam, in which healing was marked by the persistence of a localized focus of inflammation adjacent to the root-end filling, even though there were intersample variations, there was little overall difference in the temporal and qualitative healing response to Vitrebond and Kalzinol. Both Vitrebond and Kalzinol have potential as root-end filling materials, as the tissue response was considerably more favourable than that to amalgam even in the short-term.     

Race, life style and renal disease in South Africa

PURPOSE: Clinical evaluation of repairing old amalgam restorations using composite inlays cemented with two different bonding agents. MATERIALS AND METHODS: Occluso-proximal Class II inlay cavities were prepared in 50 old defective amalgam restorations. Extra oral system (EOS) composite inlays were cemented with two different bonding agents (All-Bond 2 or Geristore). After final finishing and polishing of each restoration, evaluation was carried out at baseline, 6 months, 12 months, and 24 months using US Public Health Service criteria. The data were collected and statistically analyzed using Chi-square test. RESULTS: No significant difference was found between the two bonding materials at any time interval.