移动互联网中的云计算研究

随着IT技术的高速发展,移动通信技术与互联网技术的融合发展带动了新兴的经济体--移动互联网。而随着云计算在移动设备中越来越广泛的应用,表明了IT领域正面临巨大变革。本文从当前移动互联网发展的背景分析了云计算在移动互联网上的应用、发展现状并指出了其发展过程中遇到的问题。     

移动云计算安全问题及安全度量方法浅析

移动云计算安全度量是云计算安全中的一个研究领域,主要是研究采用手机等移动终端设备,通过移动互联网使用云计算服务过程中的安全问题及安全度量方法。本文分析了目前移动云计算行业发展过程中存在的安全问题,指出了这些安全问题是阻碍用户使用云计算服务的关键,分析了传统的安全度量方法在移动云计算中的应用的优缺点,并在此基础上提出了一种基于场景的移动云计算安全度量方法,该方法可以有效度量和展示用户正在使用的云计算服务的安全情况,可以解除用户对于安全的顾虑,让用户放心使用。     

移动互联网的云计算应用研究

随着云计算方式的发展,移动互联网的不断优化和智能终端的逐渐普及,移动云计算势必成为移动互联网未来发展趋势。文中结合移动互联网的现状分析了目前移动云计算的主要应用研究,并总结了移动云计算的特点与发展过程中面临的主要问题,同时对其研究方向提出了展望     

云计算背景下的移动互联应用发展研究

本文简要概述了移动互联网的概念,分析了云计算对移动互联网的影响,还分析了云计算与移动互联之间的关系,进而重点探讨了云计算在移动互联网中的应用以及发展现状,期望可以发挥云计算的最大优势,更好的服务于移动互联网的发展中。     

移动互联网环境下云计算安全浅析

移动云计算是移动互联网产业与云计算技术的结合,是ICT行业炙手可热的新业务发展模式,但其面临着新的安全威胁。文章浅析了移动互联网环境下的云计算安全问题,给出了安全建议,为移动互联网环境下云计算安全发展提供参考。     

试论云计算在移动互联网的应用

本文首先对云计算和移动云计算进行概述,对云计算技术在移动互联网应用中的优势进行分析,对云计算技术在移动互联网应用中的制约条件进行研究,对云计算技术在移动互联网应用中的前景进行探讨。     

云计算应用模式下移动互联网安全解析

移动互联网是将传统互联网和移动通信网络进行结合的生成物,在网络技术的不断发展下,人们在移动终端的支持下加强了对互联网的访问,在云计算技术的应用下,对移动互联网的应用安全问题带来了巨大的威胁.本文在阐述云计算应用特点的基础上,对云计算应用模式下的移动互联网安全问题进行解析,并为如何在云计算应用模式下提升互联网安全进行策略分析.     

云计算在移动应用开发领域的应用探究

随着科学技术的不断发展,云计算技术凭借强大的功能,成为移动互联网应用开发的“新宠儿”,是当前重要的科学技术。本文首先概述了云计算与移动云计算,并在此基础之上,论述了移动互联网应用开发,以及移动云计算应用。     

移动互联网环境下的云计算安全技术体系与架构

随着互联网技术发展的突飞猛进,ICT行业内云计算技术与移动互联网相结合的新发展业务模式是目前最炙手可热的,但是这种模式在运行中存在着新的危险点。本文主要通过移动互联网来设计出了一个拥有用户接口统一、多层次、跨平台、多级别以及弹性的云计算通用移动互联网安全技术构架以及体系,这个平台不仅可以让不同差异等级的云计算实现安全服务,还可以让云安全管理的中跨层实现监控整个系统的跨安全级别、跨安全域以及运行安全情况。     

基于应用虚拟化的智能终端关键技术研究

移动互联网风头正盛,智能终端、网络和应用成为移动互联网发展的3个要素,如何将其有力结合成为企业争夺移动互联网市场制高点的关键。智能终端的出现极大地丰富了基于云计算的应用服务的表现形式,为智能终端用户提供了大量网上云服务,因此智能终端与云应用相结合成为移动互联网云服务提供商关注的焦点。本文在分析目前主流的智能终端云计算应用模式的基础上,具体落脚于一种基于SaaS云计算架构的应用虚拟化技术,在智能终端多样化的发展趋势下,分析对应用虚拟化云应用平台的新需求,并结合实践经验总结应用虚拟化适配智能终端的关键技术。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks     

Call for Papers—Feature Topic,Vol.12,No.7,2015

正Information Centric Networking Information-Centric Networking(ICN) is an emerging direction in Future Internet architecture research,gaining significant tractions among academia and industry.Aiming to replace the conventional host-to-host communication model by a data-centric model,ICN treats data content as the first