Biodegradable hollow fibres containing drug‐loaded nanoparticles as controlled release systems

A ‘multiple’ delivery system was studied, consisting of hollow microfibres containing drug‐loaded nanoparticles. Both fibres and nanoparticles are made of biodegradable polymers, so that the system does not need any surgical operation to be removed. The main advantage of the system is that it allows the contemporaneous release of different kinds of drugs. Copolymers of poly(lactic acid) and ?‐caprolactone were used for the preparation of the fibres through both wet and dry–wet spinning procedures. Two types of nanoparticles, gelatin and poly(DL ‐lactide‐co‐glycolide) nanoparticles, were prepared by simple water‐in‐oil and oil‐in‐water emulsions, respectively. Drugs such as dexamethasone and methotrexate were used to load the particles. The technique employed for the preparation of the nanoparticles filled fibres was described and the drug release characteristics of this system were investigated and compared with those of the free nanoparticles. © 2002 Society of Chemical Industry     

Preparation and release characteristics of dexamethasone acetate loaded organochlorine‐free poly(lactide‐co‐glycolide) nanoparticles

Dexamethasone‐loaded poly(lactide‐co‐glycolide) (PLGA) devices are commonly used as model systems for controlled release. In this study, PLGA nanoparticles containing dexamethasone acetate were prepared by a nanoprecipitation technique in the absence of organochlorine solvents and were characterized by their mean size, ζ potential, scanning electron microscopy, and differential scanning calorimetry to develop a controlled release system. The analytical method for the quantification of dexamethasone acetate by high‐performance liquid chromatography was validated. The results show that it was possible to prepare particles at a nanometric size because the average diameter of the drug‐loaded PLGA particles was 540 ± 4 nm with a polydispersity index of 0.07 ± 0.01 and a ζ potential of ?2.5 ± 0.3 mV. These values remained stable for at least 7 months. The drug encapsulation efficiency was 48%. In vitro tests showed that about 25% of the drug was released in 48 h. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41199.     

Fabrication of polymer/drug‐loaded hydroxyapatite particle composite fibers for drug sustained release

The aim of this study is to fabricate polymer/hydroxyapatite (HA) particle composite fibers for drug encapsulation and sustained release. Firstly, drug‐loaded hydroxyapatite particles are synthesized in one step, then by electrospinning of the blends of drug‐loaded hydroxyapatite particles and polymer solution the drug‐loaded polymer/hydroxyapatite particle composite fibers are successfully prepared. Effect of loading ratio of drug‐loaded hydroxyapatite particles in the fibers and pH value of the release medium on the drug release kinetics are both investigated, and the results demonstrate that, as compared with the polymer/drug electrospun fibers, the drug in the polymer/drug‐loaded hydroxyapatite particle composite fibers shows a sustained release manner, and the drug release rate can be regulated by both the loading ratio of drug‐loaded hydroxyapatite particles in the composite fibers and pH value of the buffer solution. The results indicate that the developed drug‐loaded polymer/hydroxyapatite particle composite fibers show great potential in bone regeneration and other related biomedical fields. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42871.     

Controlled release of chlorpheniramine maleate through IPN beads of sodium alginate‐g‐methylmethacrylate

Controlled release of chlorpheniramine maleate drug, through sodium alginate‐g‐methylmethacrylate (NaAlg‐g‐MMA) interpenetrating polymeric network beads, has been investigated. Beads were prepared by precipitating the viscous solution of NaAlg‐g‐MMA in acetone followed by cross‐linking with glutaraldehyde. The beads were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). Different formulations of beads were developed by varying amounts of MMA, cross‐linking agent, and drug concentration. DSC thermograms of chlorpheniramine maleate drug‐loaded NaAlg‐g‐MMA beads confirmed the molecular level distribution of drug in the polymer matrix. FTIR of beads confirm the grafting and cross‐linking, SEM of the beads suggested the formation of spherical particles. Swelling experiments on the beads provided an important information on drug diffusion properties. Release data have been analyzed using an empirical equation to understand the nature of transport of drug containing solution through the polymeric matrices. The controlled release characteristics of the matrices for chlorpheniramine maleate was investigated in pH 7.4 media. Drug was released in a controlled manner upto 12 h. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Ultrafine ibuprofen‐loaded polyvinylpyrrolidone fiber mats using electrospinning

BACKGROUND: Drug‐loaded electrospun ultrafine fibers have the advantages of both nanoscale drug delivery systems and conventional solid dosage forms. To improve the control of drug release, the combined use of electrospinning and pharmaceutical polymers has attracted increasing interest recently. RESULTS: Ultrafine drug‐loaded polyvinylpyrrolidone fibers were successfully prepared using an electrospinning process with ibuprofen as the active pharmaceutical ingredient and polyvinylpyrrolidone K30 as the filament‐forming polymer. The analytical results from scanning electron microscopy, differential scanning calorimetry and Fourier transform infrared spectroscopy indicated that the drug had good compatibility with the polymer and that the drug was well distributed in the ultrafine fibers as an amorphous physical form. In vitro dissolution tests showed that the fiber mats were able to dissolve within 10 s through a polymer‐controlled mechanism. CONCLUSION: The fast dissolution of drug‐loaded fibers may lead to applications that improve dissolution rates of poorly water‐soluble drugs, or that involve the preparation of oral fast‐dissolving drug delivery systems. Copyright © 2009 Society of Chemical Industry     

Formation mechanism of polyaniline self‐assembled needles and urchin‐like structures assisted by magnesium oxide

The polyaniline (PANI) morphological structure is strongly correlated with the preparation procedure, yielding diverse geometries such as nano‐tubes, belts, rods, fibres and particles. In this study, the synthesis of a novel PANI morphology of consisting of hollow needles and urchin‐like structures is presented and its formation mechanism is explained. The polymer was synthesized by chemical oxidative polymerization of aniline in the presence of magnesium oxide as a structural directing agent. The morphological study of the urchin‐like PANI was conducted using scanning electron microscopy and in situ monitoring of needle growth was done using optical microscopy. The structure and functional groups of these novel structures were characterized using Fourier transform infrared spectroscopy. Additionally, the formation mechanism is modelled based on the multi‐layer theory where a core–shell structure exists between the polymer (shell) and the magnesium oxide particles (core). © 2014 Society of Chemical Industry     

Nanogel-modified polycaprolactone microfibres with controlled water uptake and degradability

In this work we prepared composite poly(caprolactone) (PCL) microfibres decorated with temperature-sensitive poly(N-vinylcaprolactam) nanogels by an one-step electropsinning process. Microfibres with variable internal structure were prepared by using two different solvent systems: methanol/toluene (Me/Tol) and chloroform/dimethylformamide (Ch/DMF). Our experimental data shows that the nature of the solvent mixtures allows obtaining microfibres with different morphologies: Microfibres with nanogels on the fibre surface (Me/Tol) and microfibres with nanogels in the fibre interior (Ch/DMF). The morphology of composite fibres was visualized by scanning electron microscopy (SEM) and their properties investigated by differential scanning calorimetry (DSC), thermo-gravimetric analysis (TGA) and contact angle measurements. The results show that combining hydrophobic poly(caprolactone) with hydrophilic nanogels leads to microfibres exhibiting controlled swelling in water. Additionally, the thermo-sensitive properties of the nanogels are maintained whether they are on the surface or inside of the fibres. The presence of nanogels in the fibre structure also allows regulating their degradability.     

Novel methyl cellulose‐grafted‐acrylamide/gelatin microspheres for controlled release of nifedipine

Naturally available carbohydrate polymers such as methylcellulose (MC) and gelatin (Ge) have been widely studied in the previous literature for controlled release (CR) applications. In this study, methyl cellulose‐g‐acrylamide/gelatin (MC‐g‐AAm/Ge) microspheres were prepared by water‐in‐oil (W/O) emulsion method and crosslinked with glutaraldehyde to encapsulate with nifedipine (NFD), an antihypertensive drug. The microspheres prepared were characterized by differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and laser particle size analyzer. DSC thermograms of NFD‐loaded AAm‐MC/Gel microspheres confirmed the molecular level distribution of NFD in the matrix. SEM indicated the formation of spherical particles. Swelling experiments supported the drug diffusion characteristics and release data of the matrices. Cumulative release data were analyzed using an empirical equation to understand the nature of transport of drug through the matrices. Controlled release characteristics of the matrices for NFD were investigated in pH 7.4 media. Drug was released in a controlled manner up to 12 h. Particle size and size distribution of the microspheres as studied by laser light diffraction particle size analyzer indicated their sizes to be around 120 μm. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and characterization of nanoparticulate poly(N‐isopropylacryl‐ amide) hydrogel for the controlled release of anti‐tumour drugs

BACKGROUND: Poly(N‐isopropylacrylamide) (PNIPA) nanohydrogels were synthesized by inverse microemulsion to be used for the controlled release of anti‐tumour drugs. Different methods were used to obtain drug‐loaded xerogels, and their effect on drug release was studied, and evaluated using mathematical modelling. RESULTS: Nanoparticulate hydrogels, with a z‐average diameter of 170 nm, were loaded with 5‐fluorouracil (5‐FU), methotrexate (MTX) or mitomycin C (MMC) by using spray drying (SD) and freeze drying (FD). Xerogels obtained by SD consisted of individual and independent particles, whereas particles established interactions in xerogels obtained by FD. Total drug release took place at 6 and 7 h from 5‐FU‐loaded and MMC‐loaded xerogels prepared by SD, whereas MTX was expelled from the xerogels formed using the SD process. Drug release was slower from xerogels prepared by FD: 5‐FU at 32 h, MMC at 120 h and MTX at 240 h. The Higuchi model most aptly fits the dissolution data. Non‐Fickian and Fickian release behaviour can be attributed to SD and FD formulations, respectively. CONCLUSION: The amount of drug loaded, the morphology of xerogels as well as the drug release characteristics not only depend on the drug but also mainly on the process used to obtain the drug‐loaded PNIPA xerogels. Copyright © 2008 Society of Chemical Industry     

Design and study of the potential of crosslinked cationic polymers as drug delivery systems for dermal application

Crosslinked carriers based on cationic monomer [2‐(acryloyloxy)ethyl]trimethylammonium chloride or 2‐(dimethylamino)ethyl methacrylate were developed and investigated as new platform for ibuprofen transdermal delivery. Series of networks of varied composition and structure were synthesized and characterized by FTIR spectroscopy and following swelling kinetics in different solvents. Dermal safety tests to examine the skin irritation and sensitization potential of the network films were performed in vivo. Chosen network compositions were loaded with ibuprofen by swelling in its ethanol solution. The structures of the drug carriers were investigated by scanning electron microscopy. Ibuprofen release from the developed drug delivery systems was followed in phosphate buffer solution at 37 °C. The investigation proved the feasibility of the developed cationic copolymer networks as effective platforms with modified ibuprofen release for potential dermal application. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46420.     

PMMA‐based microgels for controlled release of an anticancer drug

Methyl methacrylate (MMA), methoxy poly(ethylene glycol) monomaleate (MPEG), and acrylamidoglycolic acid (AGA) terpolymeric microgels (MGs) have been synthesized by free‐radical surfactant‐free emulsion polymerization. MPEG was synthesized from maleic anhydride and methoxy poly(ethylene glycol). The MGs were crosslinked with ethylene glycol dimethacrylate, and the chemical crosslinking was confirmed by Fourier transform infrared spectroscopy. 5‐Fluorouracil (5‐FU), a model anticancer drug, has been loaded into the MGs by in situ and adsorption methods. Empty as well as drug‐loaded MGs were then characterized by transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and X‐ray diffraction (XRD). DSC and XRD studies indicated a molecular level dispersion of the drug in PMMA MGs during in situ loading. TEM images showed the formation of spherical MGs. In vitro release of 5‐FU from the crosslinked poly(MMA‐co‐AGA‐co‐MPEG) MGs were investigated at both pH 7.4 and 1.2 buffer medium that controlled release of the drug up to ～ 18 h. Both the encapsulation efficiency and the release patterns were dependent on the amount of crosslinking agent and the amount of drug loaded. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and characterization of tetracycline‐loaded interpenetrating polymer networks of carboxymethyl cellulose and poly(acrylic acid): water sorption and drug release study

Tetracycline (TC)‐loaded ionic interpenetrating polymer networks (IPNs) of carboxymethyl cellulose (CMC) and crosslinked poly(acrylic acid) (PAA) were prepared and characterized by infrared spectral analysis, differential scanning calorimetry and scanning electron microscopy techniques. The prepared IPNs were evaluated for in vitro blood compatibility by clot formation and hemolysis methods and their water imbibitions capacity was determined. Fractional release dynamics of tetracycline was also investigated from loaded IPNs of CMC and PAA. The entrapped drug was examined for antibacterial activity and structural integrity and effects of various parameters such as percentage loading of the drug, chemical composition of the carrier IPN, pH and temperature of the release medium were investigated on the release profiles of TC. The drug was also released in different simulated biological fluids. Copyright © 2005 Society of Chemical Industry     

Dye‐affinity hollow‐fibres and their lysozyme adsorption–desorption characteristics

Dye‐affinity adsorption is increasingly used for protein separation. Hollow‐fibres have advantages as adsorbents in comparison to conventional bead supports because they are not compressible and can eliminate internal diffusion limitations. The aim of this study was to explore in detail the performance of polyamide hollow‐fibres to which Reactive Green HE‐4BD was attached for adsorption of lysozyme. The hollow‐fibre was characterized by scanning electron microscopy. These dye‐carrying hollow‐fibres (26.3 µmol g^?1) were used in the lysozyme adsorption–elution studies. The effect of initial concentration of lysozyme and medium pH on the adsorption efficiency of dye‐attached hollow‐fibres was studied in a batch system. The non‐specific adsorption of lysozyme on the polyamide hollow‐fibres was 1.8 mg g^?1. Reactive Green HE‐4BD attachment significantly increased the lysozyme adsorption up to 41.1 mg g^?1. Langmuir adsorption model was found to be applicable in interpreting lead adsorption by Reactive Green HE‐4BD attached hollow fibres. Significant amount of the adsorbed lysozyme (up to 95%) was eluted in 1 h in the elution medium containing 1.0 M NaSCN at pH 8.0. In order to determine the effects of adsorption conditions on possible conformational changes of lysozyme structure, fluorescence spectrophotometry was employed. We concluded that polyamide dye‐affinity hollow‐fibres can be applied for lysozyme adsorption without causing any significant conformational changes. Repeated adsorption–elution processes showed that these dye‐attached hollow‐fibres are suitable for lysozyme adsorption. © 2001 Society of Chemical Industry     

Preparation,characterization, antibacterial properties,and hemostatic evaluation of ibuprofen‐loaded chitosan/gelatin composite films

Ibuprofen‐loaded chitosan/gelatin (CS/GE) composite films were fabricated in this work. The morphology of the composite film was investigated using scanning electron microscopy. The functional groups of the composite film before and after crosslinking were characterized using Fourier transform infrared spectroscopy. Meanwhile, the mechanical properties, antibacterial performance, cytocompatibility, and hemostatic activity of the composite films were investigated. The results show that the amount of CS affected the mechanical properties and liquid uptake capacities of the composite films. The composite film showed better bactericidal activity against Staphylococcus aureus than Escherichia coli. In vitro drug‐release evaluations showed that crosslinking could control the drug‐release rate and period in wound healing. Both types of CS/GE and drug‐loaded CS/GE composite films also showed excellent cytocompatibility in cytotoxicity assays. The hemostatic evaluation indicated that the composite film crosslinked by glutaraldehyde in rabbit livers had a dramatic hemostatic efficacy. Therefore, ibuprofen‐loaded CS/GE composite films are potentially applicable as a wound dressing material. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45441.     

Synthesis and evaluation of sucrose‐containing polymeric hydrogels for oral drug delivery

Biodegradable and biocompatible copolymeric hydrogels based on sucrose acrylate, N‐vinyl‐2‐pyrrolidinone, and acrylic acid were designed and synthesized. Because of the growing importance of sugar‐based hydrogels as drug delivery systems, these new pH‐responsive sucrose‐containing copolymeric hydrogels were investigated for oral drug delivery. The sucrose acrylate monomer was synthesized and characterized. The copolymeric hydrogel was synthesized by free‐radical polymerization. Azobisisobutyronitrile (AIBN) was the free‐radical initiator employed and bismethyleneacrylamide (BIS) was the crosslinking agent used for hydrogel preparations. Homopolymeric vinyl pyrrolidone hydrogels were also prepared by the same technique. The hydrogels were characterized by differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscopy. Equilibrium swelling studies were carried out in enzyme‐free simulated gastric and intestinal fluids (SGF and SIF, respectively). These results indicate the pH‐responsive nature of the hydrogels. The gels swelled more in SIF than in SGF. A model drug, propranolol hydrochloride (PPH), was entrapped in these gels and the in vitro release profiles were established separately in both enzyme‐free SGF and enzyme‐free SIF. The drug release was found to be faster in SIF. About 93 and 99% of the entrapped drug was released over a period of 24 h in SGF and SIF, respectively. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2597–2604, 2002     

Composite chitosan/poly(ethylene oxide) electrospun nanofibrous mats as novel wound dressing matrixes for the controlled release of drugs

The aim of this study was to develop novel biomedical electrospun nanofiber mats for controlled drug release, in particular to release a drug directly to an injury site to accelerate wound healing. Here, nanofibers of chitosan (CS), poly(ethylene oxide) (PEO), and a 90 : 10 composite blend, loaded with a fluoroquinolone antibiotic, such as ciprofloxacin hydrochloride (CipHCl) or moxifloxacin hydrochloride (Moxi), were successfully prepared by an electrospinning technique. The morphology of the electrospun nanofibers was investigated by scanning electron microscopy. The functional groups of the electrospun nanofibers before and after crosslinking were characterized by Fourier transform infrared spectroscopy. X‐ray diffraction results indicated an amorphous distribution of the drug inside the nanofiber blend. In vitro drug‐release evaluations showed that the crosslinking could control the rate and period of drug release in wound‐healing applications. The inhibition of bacterial growth for both Escherichia coli and Staphylococcus aureus were achieved on the CipHCl‐ and Moxi‐loaded nanofibers. In addition, both types of CS/PEO and drug‐containing CS/PEO nanofibers showed excellent cytocompatibility in the cytotoxicity assays. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42060.     

Synthesis and characterisation of fluorescent pyrene‐end‐capped polylactide fibres

Fluorescent markers are critical for tracking the position and movement of molecules both in vivo and in vitro. Conventionally, synthetic dyes are non‐covalently added to polymers for fluorescent tracking, but often diffuse away. Here we demonstrate, for the first time, a facile method for the synthesis of fluorescent poly(lactic acid) nano‐/microfibres for biomedical applications using solution spin blowing. Pyrene‐end‐capped poly(l ‐lactide) (PLLA) derivatives were synthesised using the ring‐opening polymerisation of l ‐lactide and they were characterised using spectroscopic and thermal analyses. Submicrometre‐sized fluorescent fibres were produced from these PLLA derivatives using solution blow spinning techniques generating polymer blends and core–shell fibres. Such system could be further exploited to incorporate electrically conductive carbon allotropes via the pyrene aromaticity, producing fluorescent and electrically active fibres for in vitro monitoring and electrical stimulation. © 2018 Society of Chemical Industry     

Cytotoxicity and cellular uptake evaluation of mitoxantrone‐loaded poly(lactic acid‐co‐lysine) arginine–glycine–aspartic acid nanoparticles

The purpose of this study was to evaluate the in vitro characteristics of poly(lactic acid‐co‐lysine) arginine–glycine–aspartic acid (PLA–PLL–RGD) nanoparticles (NPs) loaded with mitoxantrone. PLA–PLL–RGD NPs with a particle size of 200 nm were prepared with a modified emulsification solvent‐diffusion method. The encapsulation efficiency of the mitoxantrone‐loaded NPs was 85%. In vitro release experiments showed that the release of the drug was prolonged and sustained, and approximately 60.2% of the mitoxantrone was released in the first week. The released drug was integrated to achieve desired drug‐release profiles and still possessed bioactivity according to a 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyl‐2h‐tetrazolium bromide assay, which indicated that mitoxantrone‐loaded NPs were more cytotoxic against Michigan Cancer Foundation 7 (MCF‐7) breast cancer cells than mitoxantrone. Furthermore, the association processes of NPs with MCF‐7 cells, including binding and effective internalization, were investigated in vitro. The cellular uptake of the NPs was qualitatively studied with confocal laser scanning microscopy and was confirmed with flow cytometry analysis. These experimental results indicated that PLA–PLL–RGD NPs could be used as drug carriers for mitoxantrone. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

PEGylated hollow pH‐responsive polymeric nanocapsules for controlled drug delivery

Novel pH‐responsive PEGylated hollow nanocapsules (HNCaps) were fabricated through a combination of distillation–precipitation copolymerization and surface thiol–ene ‘click’ grafting reaction. For this purpose, SiO₂ nanoparticles were synthesized using the Stöber approach, and then modified using 3‐(trimethoxysilyl)propyl methacrylate (MPS). Afterward, a mixture of triethyleneglycol dimethacrylate (as crosslinker), acrylic acid (AA; as pH‐responsive monomer) and MPS‐modified SiO₂ nanoparticles (as sacrificial template) was copolymerized using the distillation–precipitation approach to afford SiO₂@PAA core–shell nanoparticles. The SiO₂ core was etched from SiO₂@PAA using HF solution, and the obtained PAA HNCaps were grafted with a thiol‐end‐capped poly(ethylene glycol) (PEG) through a thiol–ene ‘click’ reaction to produce PAA‐g‐PEG HNCaps. The fabricated HNCaps were loaded with doxorubicin hydrochloride (DOX) as a model anticancer drug, and their drug loading and encapsulation efficiencies as well as pH‐dependent drug release behavior were investigated. The anticancer activity of the drug‐loaded HNCaps was extensively evaluated using MTT assay against human breast cancer cells (MCF7). The cytotoxicity assay results as well as superior physicochemical and biological features of the fabricated HNCaps mean that the developed DOX‐loaded HNCaps have excellent potential for cancer chemotherapy. © 2020 Society of Chemical Industry     

Biocompatible and biodegradable alginate/poly(N‐isopropylacrylamide) hydrogels for sustained theophylline release

Mixed‐interpenetrated polymeric networks based on sodium alginate (ALG) and poly(N‐isopropylacryl amide) (PNIPAAm) covalently cross‐linked with N,N'‐methylenebisacrylamide are studied for their biocompatibility, nontoxicity, and biodegradability aiming their application in drug delivery. The presence of drug‐polymeric matrix interactions and the distribution of the drug in the polymeric network for theophylline‐loaded ALG/PNIPAAm hydrogels are also investigated by spectroscopic and microscopic methods. The quantitative evaluation of theophylline loaded hydrogels performed by NIR‐CI technique shows a better drug entrapment and a higher homogeneity of the samples with increased alginate content. The thermal behavior of the hydrogels is significantly modified by theophylline presence. The application of the ALG/PNIPAAm hydrogels as carriers for sustained drug release formulations was assessed by the theophylline release tests performed both by in vitro and in vivo studies. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40733.