Investigation of liquid crystalline and photocrosslinkable poly[4‐x‐phenyl‐4′‐(m‐methacryloyloxyalkyloxy)cinnamate]s

Three series of liquid‐crystalline‐cum‐photocrosslinkable polymers were synthesized from 4‐x‐phenyl‐4′‐(m‐methacryloyloxyalkyloxy)cinnamates (x = ? H, ? OCH₃ and ? CN; m = 6, 8 and 10) by free radical solution polymerization using azobisisobutyronitrile as an initiator in tetrahydrofuran at 60 °C. All the monomers and polymers were characterized using intrinsic viscosity, and FTIR, ¹H NMR and ¹³C NMR spectroscopy. The liquid crystalline behavior of these polymers was examined using a hot stage optical polarizing microscope. All the polymers exhibited liquid crystalline behavior. The hexamethylene spacer‐containing polymers exhibited grainy textures; in contrast, the octamethylene and decamethylene spacer‐containing polymers showed nematic textures. Differential scanning calorimetry data confirmed the liquid crystalline property of the polymers. Thermogravimetric analysis revealed that all the polymers were stable between 236 and 344 °C in nitrogen atmosphere and underwent degradation thereafter. As the methylene chain length increases in the polymer side‐chain, the thermal stability and char yield of the polymers decrease. The photocrosslinking property of the polymers was investigated using the technique of exposing the polymer solution to UV light and using UV spectroscopy. The crosslinking reaction proceeds via 2π–2π cycloaddition reactions of the ? CH?CH? of the pendant cinnamate ester. The polymers containing electron‐releasing substituents (? OCH₃) showed faster crosslinking than the unsubstituted polymers and those containing electron‐withdrawing substituents (? CN). Copyright © 2007 Society of Chemical Industry     

Investigation on thermotropic liquid crystalline and photocrosslinkable polyarylidene arylphosphate esters containing cyclohexanone units

Two series of novel liquid crystalline-cum-photocrosslinkable divanillylidene cyclohexanone containing polymers have been synthesized from 2,6-bis[m-hydroxyalkyloxy(vanillylidene)]cyclohexanone [m=6, 8, 10] with different arylphosphorodichloridates (naphthyl, biphenyl) by solution polycondensation method at ambient temperature. Their chemical structures were confirmed by FT-IR, ¹H, ¹³C and ³¹P NMR spectroscopy. The intrinsic viscosity values were measured to find out molecular weight of the synthesized polymers. The mesogenic properties and phase behaviors were investigated with differential scanning calorimetry and hot stage optical polarized microscopy. The experimental results demonstrated that the mesogenic transition and isotropization temperature gradually decreases with increase in even number of methylene spacer of the polymer chain. All the polymers showed anisotropic behavior under hot stage optical polarized microscope (HOPM). The thermal behaviors of the polymers were studied by thermogravimetric analysis and stable between 292 and 330 °C. The photocrosslinking of the polymers was investigated in thin film by UV light/UV spectroscopy and the cyclobutane ring formation via 2π-2π cycloaddition reactions of the divanillylidene exo-cyclic double bond of the polymer backbone. The pendant naphthyloxy containing polymers show faster crosslinking than the pendant biphenyloxy containing polymers.     

Synthesis and characterization of liquid crystalline polymers containing aromatic ester mesogen and a nonmesogenic ferrocene unit in the spacer

A new series of liquid crystalline polymers containing aromatic triad ester mesogen and 1,1′‐disubstituted ferrocene as a nonmesogenic unit along with polymethylene spacer was synthesized. The polymer was synthesized by a room temperature polycondensation reaction between bis(4‐chloroformyl phenyloxy alkyl ferrocene dicarboxylate) and quinol. The alkyl groups have been varied by an even number of methylene groups with a range from two to ten groups. All the polymers were found to possess liquid crystalline properties. The identification of the mesophase is more transparent with an increase in the spacer. The thermal characteristics were studied using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results reveal that the thermal stability of the polymers was decreased with increasing spacer length. The T_g, T_m, and T_i of the polymers decreased with increasing methylene groups. The incorporation of the ferrocene moiety also has a considerable effect on the glass transition temperature. The char yield of the polymer decreases with an increasing methylene chain length. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3494–3501, 2002     

Liquid crystalline and photocrosslinkable poly(4,4′‐stilbeneoxy) alkylarylphosphates

Three series of liquid crystalline and photocrosslinkable poly(4,4′‐stilbeneoxy) alkylarylphosphates were synthesized from various 4,4′‐bis(m‐hydroxyalkyloxy)stilbenes (m = 2, 4, 6, 8, 10) and arylphosphorodichloridates in chloroform by solution polycondensation method. Polarized optical microscope (POM) and differential scanning calorimetry (DSC) observations revealed that polymers containing less than four methylene spacer groups did not exhibit liquid crystalline (LC) texture, possibly due to smaller microdomain and restricted movement of the mesogen. In contrast, polymers containing more than four methylene spacer group established LC texture, which has been attributed to the larger monodomain and free movement of mesogens. Thermogravimetric analysis (TGA) data indicated that thermal stability and char yield decreased with increasing flexible methylene spacer groups, increased significantly for biphenyloxy and 1‐naphthyloxy containing polymers than that of phenyloxy containing polymers ascribed to increasing aromaticity, size, and number of aromatic rings. Photocrosslinking of stilbene containing polymers has been shown to proceed via 2π‐2π cycloaddition reaction by Ultra‐violet (UV) and fluorescence. The rate photocrosslinking has been found to increase with increasing number of methylene group in the main chain. The aromaticity of the side chain also increases the rate of crosslinking. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Thermotropic liquid‐crystalline polyphosphate esters containing phenolphthalein moiety

A new series of thermotropic liquid‐crystalline (LC) polyphosphate esters containing phenolphthalein as a part of their mesogen has been synthesized by a solution polycondensation method. The even‐numbered methylene spacers were varied from 2–10, and ethyl phosphate was used as a phosphorus heterogeneity. Thermal analysis showed that these polymers are stable up to 275–342°C with high char yield. All of the polymers exhibited liquid‐crystalline properties except for Polymers I and VI. Differential scanning calorimetry (DSC) confirmed the mesophase formation of the polymers. The glass transition temperature (T_g) and melting temperature (T_m) of the polymers were considerably low. A polymer containing phenolphthalein alone as a rigid segment with decamethylene spacers was also synthesized, but it did not show birefringent melt properties. These results reveal that phenolphthalein alone cannot act as a mesogen, whereas phenolphthalein phenylester can. Molecular modeling studies and conformational analysis confirmed that the steric hindrance of phenylester and the conjugation effect could explain the promotion of mesogenic behavior by phenolphthalein phenylester. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 194–200, 2004     

Phase behavior of side‐chain liquid‐crystalline elastomers and their precursors containing para‐nitro azobenzene

Side‐chain liquid‐crystalline copolymethacrylates (PMm's), containing para‐nitro azobenzene as the mesogenic group and 2‐hydroxylethyl methacrylate (HEMA) as a comonomer, were synthesized by radical polymerization, and their corresponding liquid‐crystalline elastomers (LCEm's) were prepared through chemical crosslinking. All of the polymers (PMm's) and the elastomers studied showed enantiotropic smectic A phases; the clearing temperature (T_i) of the PMm polymers decreased with increasing amount of HEMA, and the T_i of the corresponding LCEm's decreased compared to that of their precursors. Small‐angle X‐ray scattering studies on the copolymers quenched from their liquid‐crystalline phases indicated that the characteristic distance increased with increasing amorphous component content and thus, the amorphous components were in between the smectic layers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2275–2279, 2003     

Mesomorphic properties of cholesteric side‐chain liquid crystalline polysiloxanes and elastomers

A series of crosslinked liquid crystalline polymers and corresponding uncrosslinked liquid crystalline polymers were prepared by graft copolymerization. Their liquid crystalline properties were characterized by differential scanning calorimetry, polarizing optical microscopy, and X‐ray diffraction measurements. The results showed that the crosslinking obtained in the isotropic state and the introduction of nonmesogenic crosslinking units into a polymeric structure could cause additional reduction of the clearing point (T_i) of the crosslinked polymers, compared with the corresponding uncrosslinked polymers. The crosslinked polymers (P‐2–P‐4) with a low crosslinking density exhibited cholesteric phases as did the uncrosslinked polymers. In contrast, a high crosslinking density made the crosslinked polymer P‐5 lose its thermotropic liquid crystalline property. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 773–778, 2004     

Synthesis and thermotropic liquid‐crystalline behavior of novel main‐chain poly(aryl ether ketones)

Novel aromatic poly(ether ketones) containing bulky lateral groups were synthesized via nucleophilic substitution reactions of 4,4′‐biphenol and (4‐chloro‐3‐trifluoromethyl)phenylhydroquinone (CF‐PH) with 1,4‐bis(p‐fluorobenzoyl)benzene. The copolymers were characterized by differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction, and polarized light microscopy observation. Thermotropic liquid‐crystalline behavior was observed in the copolymers containing 40, 50, 60, and 70 mol % CF‐PH. The crystalline–liquid‐crystalline transition [melting temperature (T_m)] and the liquid‐crystalline–isotropic phase transition appeared in the DSC thermograms, whereas the biphenol‐based homopolymer had only a melting transition. The novel poly(aryl ether ketones) had glass‐transition temperatures that ranged from 143 to 151°C and lower T_m's that ranged from 279 to 291°C, due to the copolymerization. The polymers showed high thermal stability, and some exhibited a large range in mesophase stability. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1347–1350, 2003     

Synthesis and characterization of α‐methylstilbene‐ and azobenzene‐based thermotropic liquid crystalline polymers

A series of combined liquid crystalline poly(bis‐4,4′‐oxy‐α‐methylstilbene‐4‐substituted (X) phenylazo‐4′‐phenyloxydecylphosphate ester)s bearing photoreactive mesogenic units were synthesized. FTIR and ¹H NMR spectroscopy confirmed the structures of these polymers. The inherent viscosities of the polymers were found to be in the range 0.45–0.65 dL g^?1. Polarizing optical microscopy (POM) exhibited birefringent liquid crystalline melt properties. The thermal properties of all of the polymers were studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The photochemical properties of these polymers were studied by UV‐visible and fluorescence spectroscopy. The influence of the photoinduced E–Z (trans–cis) isomerization of the various terminal substituents of the side‐chain azobenzenes was investigated. The kinetics of the photoisomerization process reveal the switching times for the conversion between the trans‐ and cis‐ forms of the azobenzene units. The photo‐optical properties of these polymers exhibited layered smectic phases and showed good photoinduced properties in their mesomorphic states. Copyright © 2005 Society of Chemical Industry     

Novel thermotropic liquid crystalline polyphosphonates

Main chain liquid crystalline polyphosphonates containing semi-flexible phenylester mesogen with even number of methylene spacers (2-10) have been synthesized. The monomers and polymers were characterized by IR, ¹H, ¹³C and ³¹P NMR spectroscopy. The spectral details are in accordance with the structures. All the polymers were exhibited liquid crystalline property in the Hot stage optical polarized microscope (HOPM). DSC thermal analysis confirms the mesophase formation for all the polymers. The grain size of the liquid crystalline mesophase is increasing with increasing methylene chain. T_g, T_m and T_i of the polymers decreased with increase in spacer length. The T_g of these phosphorus-containing polymers is much lower than that of non-phosphorus polymers containing triad ester mesogens. Energy minimized structures for the molecules which mimic the polymer chain suggests that the reduction in T_g may be due to entanglement raised by incorporation of phosphorus heterogeneity.     

Synthesis and characterization of side‐chain liquid‐crystalline polyacrylates containing azobenzene moieties

Syntheses of novel liquid‐crystalline polymers containing azobenzene moieties were performed by a convenient route with an acrylate backbone. The azobenzenes were key intermediates of the monomers, and side‐chain liquid‐crystalline polymers were prepared, that is, poly[α‐{4‐[(4‐acetylphenyl)azo]phenoxy}alkyloxy]acrylates, for which the spacer length was 3 or 11 methylene units. In addition, poly[3‐{4‐[(3,5‐dimethylphenyl)azo]phenoxy}propyloxy]acrylate was prepared with a spacer length of 3 methylene units. The structures of the precursors, monomers, and polymers were characterized with Fourier transform infrared, ¹H‐NMR, and ¹³C‐NMR techniques. The polymers were obtained by conventional free‐radical polymerization with 2,2′‐azobisisobutyronitrile as an initiator. The phase‐transition temperatures of the polymers were studied with differential scanning calorimetry, and the phase structures were evaluated with a polarizing optical microscopy technique. The results showed that two of the monomers and their corresponding polymers exhibited nematic liquid‐crystalline behavior, and one of the monomers and its corresponding polymer showed smectic liquid‐crystalline behavior. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2653–2661, 2002     

Photocrosslinkable phosphorus containing homo‐ and copolyesters: Synthesis,characterization, and photosensitive properties

A new series of homo‐ and copolyphosphoramide esters containing pendant chlorine group was synthesized from dihydroxy chalcones, N‐(4‐chlorophenyl)phosphoramidic dichloride, and terephthaloyl chloride by interfacial polycondensation technique. The diol monomers were prepared by condensing 4‐hydroxy benzaldehyde and 3‐methoxy‐4‐hydroxybenzaldehyde with 4‐hydroxy acetophenone. The synthesized monomers and polymers were characterized by UV, IR and ¹H, ¹³C, and ³¹PNMR spectroscopic techniques. Molecular weight of the polymers was determined by gel permeation chromatography. The thermal properties of the polymers were studied by thermogravimetric analysis and differential scanning calorimetry under nitrogen atmosphere. The photo‐crosslinking ability of the polymers in various solvents was observed with UV spectrophotometer. The photocrosslinking proceeds via 2π +2π cycloaddition reaction of α, β‐unsaturated carbonyl group. The comparison study on the rate of photocrosslinking of homo and copolymers was also carried out. The chemical and physical properties of these polyesters are compared with those of the unsubstituted polyesters and the results are discussed herein. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and properties of side chain cholesteric liquid‐crystalline polyacrylates containing two mesogenic groups

The synthesis of side chain cholesteric liquid‐crystalline polymers containing both 4‐cholesteryl‐4'‐acryloyloxybenzoate (M_I) and 4‐methoxyphenyl‐4'‐acryloyloxybenzoate (M_II) mesogenic side groups is described. The chemical structures of the obtained monomers and polymers are confirmed by Fourier transform infrared (FTIR) spectroscopy. The phase behavior and optical properties of the synthesized monomers and polymers were investigated by polarizing optical microscopy (POM), differential scanning calorimetry (DSC), and thermogravimetric analyses (TGA). The homopolymer IP reveals a cholesteric phase and VIIP displays a nematic phase. The copolymers IIP–VIP exhibit, respectively, cholesteric oily‐streak texture and focal‐conic texture. The fixation of the helical pitch and oily‐streak texture of the cholesteric phase is achieved by quenching, and polymer films with different reflection colors are obtained. The experimental results demonstrate that the glass transition temperature (T_g) and the melting temperature (T_m) of the copolymers IIP–VIP decrease, whereas the isotropization temperature (T_i) and the mesomorphic temperature range (ΔT) increase with increasing content of mesogenic M_II units. TGA results indicate that the temperatures at which 5% mass loss occurred (T_5wt%) of all copolymers are >245°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1936–1941, 2003     

Synthesis and properties of new aromatic poly(ester‐imide)s derived from 4‐p‐biphenyl‐2,6‐bis(4‐trimellitimidophenyl) pyridine and various dihydroxy compounds

A novel class of wholly aromatic poly(ester‐imide)s, having a biphenylene pendant group, with inherent viscosities of 0.32–0.49 dL g^?1 was prepared by the diphenylchlorophosphate‐activated direct polyesterification of the preformed imide‐ring‐containing diacid, 4‐p‐biphenyl‐2,6‐bis(4‐trimellitimidophenyl)pyridine (1) with various aromatic dihydroxy compounds in the presence of pyridine and lithium chloride. A reference diacid, 2,6‐bis(trimellitimido)pyridine (2) without a biphenylene pendant group and two phenylene rings in the backbone, was also synthesized for comparison purposes. At first, with due attention to structural similarity and to compare the characterization data, a model compound (3) was synthesized by the reaction of compound 1 with two mole equivalents of phenol. Moreover, the optimum condition of polymerization reactions was obtained via a study of the model compound synthesis. All of the resulting polymers were characterized by Fourier transform infrared and ¹H NMR spectroscopy and elemental analysis. The ultraviolet λ_max values of the poly(ester‐imide)s were also determined. All of the resulting polymers exhibited excellent solubility in common organic solvents, such as pyridine, chloroform, tetrahydrofuran, and m‐cresol, as well as in polar organic solvents, such as N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfoxide. The crystalline nature of the polymers obtained was evaluated by means of wide‐angle X‐ray diffraction. The resulting poly(ester‐imide)s showed nearly an amorphous nature, except poly(ester‐imide) derived from 4,4′‐dihydroxy biphenyl. The glass transition temperatures (T_g) of the polymers determined by differential scanning calorimetry thermograms were in the range 298–342 °C. The 10% weight loss temperatures (T_10%) from thermogravimetric analysis curves were found to be in the range 433–471 °C in nitrogen. Films of the polymers were also prepared by casting the solutions. Copyright © 2006 Society of Chemical Industry     

Synthesis and characterization of cross‐linkable poly(phthalazinone ether ketone)s

A novel class of crosslinkable poly(phthalazinone ether ketone)s with relative high molecular‐weight and good solubility were successfully synthesized by the copolymerization of bisphthalazinone containing monomer, 3,3′‐diallyl‐4,4′‐dihydroxybiphenyl and 4,4′‐di‐ fluorobenzophenone. The synthesized polymers with inherent viscosities in the range of 0.42 to 0.75 dL/g can form flexible and transparent membranes by casting from their solution. The crosslinking reaction of these polymers can be carried out by thermally curing of the virgin polymers in or without the presence of crosslinking agent. The experimental results demonstrated that the crosslinking reaction also occurred to some extent during the polymerization. The crosslinked polymers exhibited equivalent glass transition temperature (T_g) at lower crosslinking density, and showed higher T_g than virgin polymers at higher crosslinking density. The crosslinked high‐temperature polymer can be used as the base material for high temperature adhesive, coating, enamel material, and composite matrices. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Synthesis and thermal properties of polythioether‐based liquid‐crystalline polymers containing azobenzene in the side chain

BACKGROUND: Owing to the unusual structural rearrangement of polychloromethylthiirane (PCMT) at room temperature, it has not been used as the main‐chain backbone of side‐chain liquid‐crystalline polymers (SLCPs). However, it has been observed that PCMT has a relatively stable and clear structure under special conditions. Therefore, we attempted to synthesize SLCPs using PCMT as main‐chain backbone and investigated their thermal behavior. RESULTS: New polymers, poly[1‐({(4‐methoxyazobenzene‐4′‐oxy)alkyl}thio)‐2,3‐epithiopropane], in which the number of methylene units in the alkyl group is 4, 5 or 6, were prepared by means of reactions of corresponding (4‐methoxyazobenzene‐4′‐oxy)alkylthiols with PCMT. The structures of these compounds were confirmed using elemental analysis and ¹H NMR spectroscopy. The substitution ratios of the copolymers with 4, 5 and 6 methylene units in the alkyl group were 56, 75 and 80%, respectively. Differential scanning calorimetry measurements and polarized optical microscopy observations showed that the resulting copolymers exhibited thermotropic liquid‐crystalline mesomorphism with nematic phase except for the copolymer with a 56% substitution ratio. The decomposition temperature of all the synthesized copolymers was near 195 °C. CONCLUSION: This investigation has demonstrated that PCMT polymerized for 8 h has the ability to act as a suitable main‐chain backbone for SLCPs. Moreover, SLCPs could be obtained only by the reaction of PCMT with thiolate salt containing mesogenic groups. The substitution ratios increased with increasing number of methylene groups in the spacer. Copyright © 2009 Society of Chemical Industry     

Miscibility enhancement of PP/PBT blends with a side‐chain liquid crystalline ionomer

Side‐chain liquid crystalline ionomer (SLCI) containing sulfonic acid groups with a polymethylhydrosiloxane main‐chain was used in the blends of polypropylene (PP) and polybutylene terephthalate (PBT) as a compatibilizer. The crystalline behavior, morphological, and mechanical properties of the blends were investigated in detail by differential scanning calorimetry (DSC), polarizing optical microscope (POM), Fourier transforms infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). Revealed by the shift of T_m in DSC thermogram and the shift of the absorbed peak in FTIR spectra, specific interaction led to stronger interfacial adhesion between these phases, which resulted in much finer dispersion of the minor PBT phase in PP matrix. The SLCI containing sulfonate acid groups acted as physical crosslinking agent along the interface, which compatibilized PP/PBT blends. The mechanical property of the blends including 4 wt % SLCI contents was better than that of other SLCI contents in the blends. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Limits to expanding the PN‐F series of polyphosphazene elastomers

Mixed‐substituent fluoroalkoxyphosphazene polymers bearing ～15% 1H,1H,2H,2H‐perfluorooctan‐1‐oxy or 1H,1H,2H,2H‐perfluorodecan‐1‐oxy side groups together with trifluoroethoxy cosubstituent groups were synthesized. The low reactivity of the long‐chain fluoroalkoxides and their limited solubility in organic solvents prevented higher levels of substitution. Moreover, the sodium alkoxides with two methylene residues adjacent to the oxygen proved to be unstable in solution due to elimination of NaF and precipitation of side products, and this limited the time available for chlorine replacement reactions. The resulting cosubstituent polymers were characterized by proton nuclear magnetic resonance (¹H‐NMR), ³¹P‐NMR, ¹⁹F‐NMR, gel‐permeation chromatography, and differential scanning calorimetry. Unlike homo‐ or mixed‐substituent fluoroalkoxyphosphazene polymers, such as [NP(OCH₂CF₃)₂]_n (a microcrystalline thermoplastic, T_g ～ ?63°C, T_m ～ 242°C) or [NP(OCH₂CF₃)(OCH₂(CF₂)_xCF₂H)]_n (PN‐F, a rubbery elastomer, T_g ～ ?60°C, but no detectable T_m), the new polymers are gums (T_g ～ ?50°C, but no detectable T_m) with molecular weights in the 10⁵ g/mol rather than the 10⁶ g/mol range. POLYM. ENG. SCI., 54:1827–1832, 2014. © 2013 Society of Plastics Engineers     

Synthesis and characterization of side‐chain liquid‐crystalline ionomers containing quaternary ammonium salt groups

A series of thermotropic side‐chain liquid‐crystalline ionomers (LCIs) containing 4‐(4‐alkoxybenzyloxy)‐4′‐allyloxybiphenyl (M) as mesogenic units and allyl triethylammonium bromide (ATAB) as nonmesogenic units were synthesized by graft copolymerization upon polymethylhydrosiloxane. The chemical structures of the polymers were confirmed by IR spectroscopy. DSC was used to measure the thermal properties of these polymers. The mesogenic properties were characterized by polarizing optical microscopy, DSC, and X‐ray diffraction. Homopolymers without ionic groups exhibit smectic and nematic mesophases. The nematic mesophases of the ionomers disappear and the mesomorphic temperature ranges decrease with increasing concentration of ionic units. The influence of the alkoxy chain length on clearing temperature (T_c) values of ionomers clearly shows an odd‐even effect, similar to that of other side‐chain liquid‐crystalline polymers. The mesomorphic temperature ranges increase with increasing alkoxy chain length when the number of alkoxy carbon is over 3. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2879–2886, 2003     

Synthesis and phase behavior of chiral side‐chain liquid‐crystalline polysiloxanes containing two mesogenic groups

The synthesis of chiral side‐chain liquid‐crystalline polysiloxanes containing both cholesteryl undecylenate (M_I) and 4‐allyloxy‐benzoyl‐4‐(S‐2‐ethylhexanoyl) p‐benzenediol bisate (M_II) mesogenic side groups was examined. The chemical structures of the obtained monomers and polymers were confirmed with Fourier transform infrared spectroscopy or ¹H‐NMR techniques. The mesomorphic properties and phase behavior of the synthesized monomers and polymers were investigated with polarizing optical microscopy, differential scanning calorimetry, and thermogravimetric analysis (TGA). Copolymers IIP–IVP revealed a smectic‐A phase, and VP and VIP revealed a smectic‐A phase and a cholesteric phase. The experimental results demonstrated that the glass‐transition temperature, the clearing‐point temperature, and the mesomorphic temperature range of IIP–VIP increased with an increase in the concentration of mesogenic M_I units. TGA showed that the temperatures at which 5% mass losses occurred were greater than 300°C for all the polymers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2670–2676, 2002