Hollow poly(N‐isopropylacrylamide)‐co‐poly(acrylic acid) microgels with high loading capacity for drugs

A convenient approach has been developed for the preparation of microsize hydrogels composed of crosslinked poly(acrylic acid) (PAA) and poly(N‐isopropylacrylamide) (PNIPAm). First, semi‐interpenetration polymer networks of hydropropylcellulose (HPC) and PNIPAm‐co‐PAA copolymer are formed through the copolymerization and crosslinking of monomer acrylic acid and N‐isopropylacrylamide in HPC aqueous solution. After the selective removal of HPC from networks due to ionization of PAA units and disruption of hydrogen bonding with increasing pH, PNIPAm‐co‐PAA microgels are obtained, whose volume is confirmed to be responsive to both temperature and pH. Doxorubicin hydrochloride (Dox) can be encapsulated in PNIPAm‐co‐PAA microgels with high drug loading driven by the electrostatic interaction, and a sustained‐release characteristic of Dox from the microgels is observed under physiological pH value and temperature. In vitro cell experiments, the drug‐loaded microgels can be taken up by LoVo cells and release their payload in cell cytoplasm without loss of drug efficacy. This indicates that PNIPAm‐co‐PAA microgels might be a potential drug delivery carriers especially for water‐soluble or polypeptide drugs. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Lower critical solution temperatures of thermo‐responsive poly(N‐isopropylacrylamide) copolymers with racemate or single enantiomer groups

BACKGROUND: Thermo‐responsive copolymers with racemate or single enantiomer groups are attracting increasing attention due to their fascinating functional properties and potential applications. However, there is a lack of systematic information about the lower critical solution temperature (LCST) of poly(N‐isopropylacrylamide)‐based thermo‐responsive chiral recognition systems. In this study, a series of thermo‐responsive chiral recognition copolymers, poly[(N‐isopropylacrylamide)‐co‐(N‐(S)‐sec‐butylacrylamide)] (PN‐S‐B) and poly[(N‐isopropylacrylamide)‐co‐(N‐(R,S)‐sec‐butylacrylamide)] (PN‐R,S‐B), with different molar compositions, were prepared. The effects of heating and cooling processes, optical activity and amount of chiral recognition groups in the copolymers on the LCSTs of the prepared copolymers were systematically studied. RESULTS: LCST hysteresis phenomena are found in the phase transition processes of PN‐S‐B and PN‐R,S‐B copolymers in a heating and cooling cycle. The LCSTs of PN‐S‐B and PN‐R,S‐B during the heating process are higher than those during the cooling process. With similar molar ratios of N‐isopropylacrylamide groups in the copolymers, the LCST of the copolymer containing a single enantiomer (PN‐S‐B) is lower than that of the copolymer containing racemate (PN‐R,S‐B) due to the steric structural difference. The LCSTs of PN‐R,S‐B copolymers are in inverse proportion to the molar contents of the hydrophobic R,S‐B moieties in these copolymers. CONCLUSION: The results provide valuable guidance for designing and fabricating thermo‐responsive chiral recognition systems with desired LCSTs. Copyright © 2008 Society of Chemical Industry     

Phase behavior of temperature‐ and pH‐sensitive poly(acrylic acid‐g‐N‐isopropylacrylamide) in dilute aqueous solution

Several different composition temperature‐ and pH‐sensitive poly(acrylic acid‐g‐N‐isopropylacrylamide) (P(AA‐g‐NIPAM)) graft copolymers were synthesized by free‐radical copolymerization utilizing macromonomer technique. The phase behavior and conformation change of P(AA‐g‐NIPAM) in aqueous solutions were investigated by UV–vis transmittance measurements, fluorescence probe, and fluorescence quenching techniques. The results demonstrate that the P(AA‐g‐NIPAM) copolymers have temperature‐ and pH‐sensitivities, and these different composition graft copolymers have different lower critical solution temperature (LCST) and critical phase transition pH values. The LCST of graft copolymer decreases with increasing PNIPAM content, and the critical phase transition pH value increases with increasing Poly(N‐isopropylacrylamide) (PNIPAM) content. At room temperature (20°C), different composition of P(AA‐g‐NIPAM) graft copolymers in dilute aqueous solutions (0.001 wt %) have a loose conformation, and there is no hydrophobic microdomain formation within researching pH range (pH 3 ～ 10). In addition, for the P(AA‐g‐NIPAM) aqueous solutions, transition from coil to globular is an incomplete reversible process in heating and cooling cycles. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A study on solution properties of poly(N,N‐diethylacrylamide‐co‐acrylic acid)

Poly(N,N‐diethylacrylamide) (PDEA), poly(acrylic acid) (PAA), and a series of (N,N‐diethylacrylamide‐co‐acrylic acid) (DEA‐AA) random copolymers were synthesized by the method of radical polymerization. The measurement of turbidity showed that the phase behaviors of the brine solutions of the copolymers changed dramatically with the mole fraction of DEA (x) in these copolymers. Copolymers cop6 (x = 0.06) and cop11 (x = 0.11) in which acrylic acid content was higher presented the upper critical solution temperature (UCST) phase behaviors similar to PAA. Copolymer cop27 (x = 0.27) presented the lower critical solution temperature (LCST) behavior similar to PDEA. While copolymer cop18 (x = 0.18) in which acrylic acid content was moderate presented both UCST and LCST behaviors. The solution properties of the polymers were investigated by measurements of viscosity, fluorescence, and pH. It is reasonable to suggest that the sharp change of the phase behavior may be attributed to the interaction between acrylamide group and carboxylic group in the (DEA‐AA) copolymers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Conjugates of poly(N‐isopropyl acrylamide‐co‐acrylic acid) with alanine monopeptide,dipeptide, and tripeptide

A random copolymer of N‐isopropyl acrylamide (NIPAAm) and acrylic acid (AAc) with an AAc content of 3.1 ± 0.19 mmol of carboxylic acid groups per gram of the copolymer and with a number‐average molecular weight of 1400 was synthesized by free‐radical polymerization with 2,2′‐azoisobutyronitrile in dimethylformamide. Then, monopeptide, dipeptide, and tripeptide (i.e., alanine) conjugates of this copolymer were prepared with their carboxyl‐end‐protected (with methyl ester hydrochloride) form of alanine, with a water‐soluble carbodiimide. Of the carboxylic acids, 93, 69, and 57% were conjugated (loaded) with alanine at the monopeptide, dipeptide, and tripeptide conjugation steps, respectively. The chemical structures of the copolymer and conjugates were analyzed by Fourier transform infrared and ¹H‐NMR, which revealed the conjugate formation. Amino acid conjugation caused significant decreases in the lower critical solution temperatures (LCST) of the copolymer, especially at pH 7.4. The LCST values of the dipeptide and tripeptide conjugates of poly(NIPAAm‐co‐AAc) at both pH 4.0 and 7.4 shifted to significantly higher temperatures. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2012–2019, 2003     

Simultaneous lower and upper critical solution temperature‐type co‐nonsolvency behaviour exhibited in water–dioxane mixtures by linear copolymers and hydrogels containing N‐isopropylacrylamide and N,N‐dimethylacrylamide

The co‐nonsolvency behaviour in water–dioxane mixtures of linear copolymers and hydrogels consisting of N‐isopropylacrylamide (NIPAM) and N,N‐dimethylacrylamide (DMAM) was studied as a function of solvent composition and temperature. The composition of the copolymers, P(NIPAM‐co‐DMAMx), in DMAM units, x, varies from x = 0 up to x = 100%. It is shown that the copolymers combine the lower critical solution temperature (LCST)‐type co‐nonsolvency behaviour of poly‐NIPAM with the upper critical solution temperature (UCST)‐type co‐nonsolvency behaviour of poly‐DMAM. Depending on x, both the LCST‐ and UCST‐type co‐nonsolvency behaviour may be simultaneously observed in water‐rich and dioxane‐rich solvent mixtures, respectively. Due to this complex phase separation behaviour, the variation of the reduced viscosity of the linear copolymers, as well as the swelling–deswelling behaviour of the respective hydrogels, are shown to be temperature‐ and solvent‐sensitive. Copyright © 2006 Society of Chemical Industry     

Water‐solution properties of a hydrophobically modified poly(N‐isopropylacrylamide)

To study the water‐solution properties of a hydrophobically modified poly(N‐isopropylacrylamide) (PNIPAM) which is temperature‐sensitive, the copolymer of N‐isopropylacrylamide (NIPAM) and octadecyl acrylate (ODA) was synthesized. The aggregation behavior of the copolymer was studied by surface tension and fluorescence probe methods. Simultaneously, the phenomenon of the lower critical solution temperature (LCST) of the copolymer in an aqueous solution with increase of the temperature was also studied using the fluorescence probe method. The results showed that phase separation occurred in an aqueous solution of the copolymer when the temperature was increased to its LCST. The π‐A isotherms for the copolymer molecules, as an insoluble monolayer on the water–air interface, was determined by the Langmuir–Blodgett (L–B) method. The abnormal phenomenon, by which the monolayer of the copolymer molecules became more and more condensed with increase of the temperature, was observed. It further indicated that phase separation of the copolymer occurred by another method. In addition, to prove the thermosensitive effect of the copolymer on the release behavior of liposomes, small unilamellar vesicles entrapped with 5(6)‐carboxyfluorescein [5(6)‐CF] were coated with the copolymer. We found that the coating of the copolymer resulted in the reduction of the release below 30°C and enhancement of the release above 30°C, indicating that there are obvious interactions between the copolymer and the liposomes. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 247–255, 2000     

Copolymers of acrylic acid with 2‐acryloyloxyethyl 2,4‐dichlorophenoxyacetate: Synthesis and herbicide release

Free‐radical copolymerization of acrylic acid with 2‐acryloyloxyethyl 2,4‐dichlorophenoxyacetate using 1.0 mol/L 1,4‐dioxane solution and 1.5 × 10^?2 mol/L of 2,2′ azobisisobutyronitrile as initiator has been carried out at 50°C. In addition to low conversion solution experiments performed to estimate the monomer reactivity ratios, three different copolymerizations over the whole range of conversions have been made. Theoretical values of cumulative copolymer composition, determined by the Mayo‐Lewis terminal model, have been correlated with those experimentally obtained. Finally, the herbicide release in three different aqueous pH buffer solutions has been evaluated in heterogeneous phase. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4238–4244, 2006     

Phase behavior of N‐isopropylacrylamide/acrylic acid copolymer hydrogels prepared with ultrasound

N‐Isopropylacrylamide/acrylic acid copolymer hydrogels were synthesized with ultrasound. The thermoresponsive phase behaviors of gels synthesized with ultrasound (US gels) were investigated and compared with those of gels synthesized in the absence of ultrasound (FR gels). The US gels showed thermoresponsive swelling behavior with a large hysteresis over a wide range of temperatures around its phase‐transition temperature. The hysteresis became larger with an increasing copolymerized acrylic acid content. The US gels were also characterized from the viewpoint of chemical, hydration, and macroscopic physical structures. Little difference was observed in the chemical and hydration structures of the FR gels and US gels. The macroscopic physical structure of the US gels was, however, distinct from that of the FR gels. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2449–2452, 2003     

Development and characterization of thermosensitive hydrogels based on poly(N‐isopropylacrylamide) and calcium alginate

This work refers to the synthesis and characterization of thermosensitive hydrogels based on interpenetrating polymer networks (IPNs) of poly(N‐isopropylacrylamide) (PNIPAAm) and calcium alginate in the form of films. The influence of the crosslinking degree of PNIPAAm and alginate content on thermal, swelling, mechanical, and morphological properties of hydrogels is investigated in detail. Characterization of pure PNIPAAm hydrogels and IPN hydrogels was performed by FTIR, DSC, DMA, and SEM. In addition, the studies of equilibrium swelling behavior as well as swelling, deswelling, and reswelling kinetics are performed. The results obtained imply the benefits of synthesizing IPNs based on PNIPAAm and calcium alginate over pure PNIPAAm hydrogels. The presence of calcium alginate contributes to the improvement of mechanical properties, the deswelling rate of hydrogels, and the network porosity, without altering the thermosensitivity of PNIPAAm significantly. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis,characterization, and metal complexation of poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) as polychelatogens in aqueous solution

We carried out the free‐radical copolymerization of N‐phenylmaleimide with acrylic acid and acrylamide with an equimolar feed monomer ratio. We carried out the synthesis of the copolymers in dioxane at 70°C with benzoyl peroxide as the initiator and a total monomer concentration of 2.5M. The copolymer compositions were obtained by elemental analysis and ¹H‐NMR spectroscopy. The hydrophilic polymers were characterized by elemental analysis, Fourier transform infrared spectroscopy, ¹H‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymers were performed. Hydrophilic poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) were used for the separation of a series of metal ions in the aqueous phase with the liquid‐phase polymer‐based retention method in the heterogeneous phase. The method is based on the retention of inorganic ions by the polymer in conjunction with membrane filtration and subsequent separation of low‐molecular‐mass species from the formed polymer/metal‐ion complex. The polymer could bind several metal ions, such as Cr(III), Co (II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) inorganic ions, in aqueous solution at pH values of 3, 5, and 7. The interaction of the inorganic ions with the hydrophilic polymer was determined as a function of pH and a filtration factor. Hydrophilic polymeric reagents with strong metal‐complexing properties were synthesized and used to separate those complexed from noncomplexed ions in the heterogeneous phase. The polymers exhibited a high retention capability at pH values of 5 and 7. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Chemical modification of metallocene‐based polyethylene–octene elastomer through solution grafting of acrylic acid and its effect on the physico‐mechanical properties

In the present work, the metallocene‐based polyethylene–octene elastomer (POE) was chemically modified by solution grafting of acrylic acid in presence of benzoyl peroxide. The relative proportions of graft and gel formation were optimized through %weight gain, Fourier Transform infrared spectroscopy, elemental analysis and proton nuclear magnetic resonance spectroscopy. The gel formation in the POE matrix was found to be the prime competitor. The effect of grafting at its maximum level on various physicomechanical properties was thoroughly investigated, using X‐ray diffraction analysis, differential scanning calorimetry, mechanical, dynamic mechanical, and thermogravimetric analysis. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis of poly(N,N‐diethylacrylamide‐co‐acrylic acid) hydrogels with fast response rate in NaCl medium

A series of thermo‐ and pH‐sensitive poly (N,N‐diethylacrylamide‐co‐acrylic acid) (P(DEA‐co‐AA)) hydrogels were prepared in NaCl aqueous solutions with different concentrations. Swelling and deswelling studies showed that in comparison with conventional P(DEA‐co‐AA) hydrogels (prepared in distilled water), the P(DEA‐co‐AA) hydrogels thus prepared had almost the same volume phase transition temperature (VPTT), but exhibited much faster response rates as the temperature was raised above their VPTT. Besides, the hydrogels prepared by this method had faster response rates in low pH buffer solutions, and the response rates increased with the increased concentration of the NaCl solutions used during the polymerization. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Independent control of lower critical solution temperature and swelling behavior with pH for poly(N‐isopropylacrylamide‐co‐maleic acid)

Polymer solutions that gel in response to changes in temperature and pH are of interest for various forms of drug delivery, and it is desirable to increase swelling for diffusion‐controlled release without bringing the lower critical solution temperature (LCST) above 37°C. N‐isopropylacrylamide (NIP) was polymerized with maleic acid (MAc), a diprotic acid, and acrylic acid (AAc), a monoprotic acid, to compare swelling and temperature response with changes in pH. For samples with equal acid contents and almost identical LCST responses to pH, poly(N‐isopropylacrylamide‐co‐maleic acid) (pNIP MAc) demonstrated greater swelling than poly(N‐isopropylacrylamide‐co‐acrylic acid) (pNIP AAc). The LCST increase for MAc occurred at a pH corresponding to the deprotonation of almost all of the first acid groups. Further increases in pH led to the deprotonation of the second ? COOH and only served to increase the charge concentration at a given location. These results provide strong support for the theory that LCST results largely from uninterrupted chain lengths of NIP and that swelling results from the actual charge density of acid groups along the chain. Because the use of a diprotic acid copolymer allows swelling to be decoupled from LCST, pNIP MAc may be an appropriate candidate for pH‐sensitive drug‐delivery applications. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2110–2116, 2004     

Hydrophobic association and temperature and pH sensitivity of hydrophobically modified poly(N‐isopropylacrylamide/acrylic acid) gels

Hydrophobically modified poly(acrylic acid/N‐isopropylacrylamide) gels were synthesized by the radical copolymerization of acrylic acid/N‐isopropylacrylamide with a small amount of the hydrophobic comonomer 2‐(N‐ethylperfluorooctanesulfoamido)ethyl acrylate, stearyl acrylate, or lauryl acrylate in tert‐butanol with ethylene glycol dimethacrylate as a crosslinker. Swelling kinetics and fluorescence measurements showed that the hydrophobic association ability of fluorocarbon groups was stronger than that of hydrocarbon analogues in modified hydrogels that contained both physical and chemical crosslinking networks. The effects of the fractions and the species of the hydrophobe on the gel swelling and pH and temperature sensitivity were studied. The results indicated that the swelling behavior and pH and temperature sensitivity of the gels were affected by the degree of hydrophobic modification. A hydrogel with a suitable 2‐(N‐ethylperfluorooctanesulfoamido)ethyl acrylate content (0.349 mol %) showed good pH and temperature sensitivity. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2406–2413, 2003     

Energy transfer to Eu(III) in the solid‐state low‐density polyethylene–poly(acrylic acid) and low‐density polyethylene–Fe2O3–poly(acrylic acid) matrices

Ion exchange between H⁺ and Eu³⁺ and/or Tb³⁺ was studied in the material modified by in situ sorption and thermal polymerization of acrylic acid in low‐density polyethylene (LDPE–PAA) and in the composite system LDPE–Fe₂O₃–PAA. Fluorescence spectroscopy showed evidence of Eu³⁺ and/or Tb³⁺ ion exchanges in these materials. The matrix LDPE–PAA after Eu(III) ion exchange presented luminescence (excitation 265 nm). This was explained by an energy‐transfer process from the matrix LDPE–PAA to Eu³⁺ ions. The LDPE–PAA matrix after simultaneous Eu³⁺/Tb³⁺ ion exchange exhibited Eu³⁺ and Tb³⁺ ion luminescence (excitation 265 nm), confirming an energy‐transfer process from LDPE–PAA to Eu³⁺ ions in LDPE–PAA–Eu³⁺–Tb³⁺ matrix. Fe₂O₃ in LDPE–Fe₂O₃–PAA quenched the matrix for excitation at 265 nm and no emission at the region 400 nm was observed. The luminescence of Tb³⁺ ions in the matrix LDPE–Fe₂O₃–PAA–Tb³⁺ (excitation 265 nm) was partially quenched by Fe₂O₃. However, a weak emission of Eu³⁺ ions was observed (excitation 265 nm) in the matrix LDPE–Fe₂O₃–PAA after simultaneous Eu³⁺ and Tb³⁺ ion exchanges, suggesting an energy transfer from Tb³⁺ to Eu³⁺ ions. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 919–931, 2000     

Metal complexation studies of amylopectin‐graft‐poly[(N,N‐dimethylacrylamide)‐co‐(acrylic acid)]: a biodegradable synthetic graft copolymer

Synthesis of amylopectin‐graft‐poly[(N,N‐dimethylacrylamide)‐co‐(acrylic acid)] was carried out using solution polymerization technique with potassium persulfate as the initiator. The graft copolymer was characterized by measuring molecular weight using size exclusion chromatography, thermal analysis and Fourier transform infrared (FTIR) spectroscopy. The synthetic graft copolymer was used for the removal of some potentially toxic metal ions, Cu(II), Zn(II) and Ni(II), from their aqueous solutions. Various operating parameters like the amount of adsorbent, solution pH, contact time and temperature were studied. The adsorption data were well described by the pseudo‐second‐order and Langmuir isotherm models. Metal complexation studies were carried out experimentally using cyclic voltammetry and UV‐visible and FTIR spectroscopies. The metal complex structure was also studied theoretically using density functional theory with the Gaussian 09 program and the geometry of the complex structure was optimized. The metal complexation ability of the graft polymer was in the order Cu(II) > Ni(II) > Zn(II). Calculation of the various thermodynamic parameters was also done. The negative value of free energy change indicates the spontaneous nature of the adsorption. © 2015 Society of Chemical Industry     

Fluorescence studies on the interaction between pyrene‐labelled poly(acrylic acid) and cyclodextrins

The interactions, in aqueous media, between a pyrene‐labelled polyelectrolyte poly(acrylic acid) (PAAMePy) with two different degrees of labelling and β‐ and γ‐cyclodextrins (β‐ and γ‐CD) were studied using absorption and fluorescence (steady‐state and time‐resolved) techniques. In addition to qualitative and quantitative parameters obtained from absorption and steady‐state fluorescence spectra, time‐resolved fluorescence data are presented, allowing additional important observations regarding the nature of the interactions. From the overall data it was possible to conclude that in the case of interaction with γ‐CD the efficient encapsulation of two pyrene units into the cavity of the cyclodextrin molecule leads to a decrease in the number of available free monomers and an increase in the number of preformed ground‐state dimers (GSDs) of pyrene. It was also shown that contrary to the situation in water, where only intramolecular interactions are present, the addition of γ‐CD leads to new interpolymeric interactions. The absence of significant changes is noted when the interactions of PAAMePy polymers take place with β‐CD. The excimer‐to‐monomer fluorescence intensity ratio (I_E/I_M) was found to increase with the added amount of γ‐CD but not with β‐CD. This increase is justified on the basis of the increase of the GSD contribution. The photophysical behaviour was found to be dependent on the pH of the media, but with the absence of relevant interactions between CD and PAAMePy polymer at alkaline values. Copyright © 2007 Society of Chemical Industry     

Exchange reactions of poly‐2‐(N‐phthalimido)ethyl acrylate with hydroxy and amino compounds

2‐(N‐Phthalimido)ethyl acrylate was prepared by the reaction of N‐(2‐hydroxyethyl)phthalimide with acrylic acid in the presence of N,N‐dicyclohexylcarbodiimide. The exchange reactions of the resulting polymer with hydroxy and amino compounds have been studied. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Phase equilibria and solution thermodynamics in the ternary system,poly(acrylic acid)-dioxane-water

The stability of solutions of poly(acrylic acid) in dioxane-water mixtures has been examined as a function of temperature and three phase boundaries have been located when water contents are less than 10 (wt/vol)%. These collapse into one boundary at higher water contents up to 25 (wt/vol)%. The cloud points have the characteristics of a quasi-LCST, a UCST, and an LCST, in order of increasing temperature, and this behaviour is comparable to the behaviour of poly(acrylic acid)-dioxane solutions. Measurements of the heat of dilution showed that this changes from being endothermic in dioxane solutions to exothermic in aqueous systems at temperatures below the quasi-LCST. Laser Raman spectra indicate the presence of hydrogen bonding between water and the polymer in the mixed solvent, which may explain the improved solvating power when water is added to dioxane.