Synthesis and characterization of PBMA‐b‐PDMS‐b‐PBMA copolymers by atom transfer radical polymerization

Poly(butyl methylacrylate)–b–poly(dimethylsiloxane)–b–poly(butyl methylacrylate) (PBMA–b–PDMS–b–PBMA) triblock copolymers were synthesized by atom transfer radical polymerization (ATRP). The reaction of α,ω‐dichloride PDMS with 2′‐hydroxyethyl‐2‐bromo‐2‐methylpropanoate gave suitable macroinitiators for the ATRP of BMA. The latter procedure was carried out at 110°C in a phenyl ether solution with CuCl and 4,4′‐di (5‐nonyl)‐2,2′‐bipyridine (dNbpy) as the catalyzing system. The polymerization was controllable, with the increase of the monomer conversion, there was a nearly linear increase of molecular weight and a decrease of polydispersity in the process of the polymerization, and the rate of the polymerization was first‐order with respect to monomer conversion. The block copolymers were characterized with IR and ¹H‐NMR and differential scanning calorimetry. The effects of macroinitiator concentration, catalyst concentration, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP were reported. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 532–538, 2004     

Synthesis and characterization of PMMA‐b‐PBMA block copolymers by atom transfer radical polymerization

The synthesis of diblock copolymers using atom transfer radical polymerization, ATRP, of n‐butyl methacrylate, BMA, and methyl methacrylate, MMA, is reported. These copolymers were prepared from 2‐bromoisobutyryl‐terminated macroinitiators of poly(MMA) and poly(BMA), using copper chloride, CuCl,/N,N,N′,N″,N″‐pentamethyldiethylenetretramine, PMDETA, as the catalyst system, at 100°C in bulk and in benzonitrile solution. The block copolymers were characterized by means of size‐exclusion chromatography, SEC, and ¹H‐NMR spectroscopy. The SEC analysis of the synthesized diblock copolymers confirmed important differences in the molecular weight control depending on the reaction medium (solvent effect) and the chemical structure of the macroinitiator used. In addition, differential scanning calorimetry, (DSC) measurements were performed, showing for all the copolymers a phase separation. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2683–2691, 2002     

Synthesis and characterization of Pst‐b‐PDMS‐b‐PSt copolymers by atom transfer radical polymerization

Polystyrene‐b‐poly(dimethylsiloxane)‐b‐polystyrene (Pst‐b‐PDMS‐b‐PSt) triblock copolymers were synthesized by atom transfer radical polymerization (ATRP). Commercially available difunctional PDMS containing vinylsilyl terminal species was reacted with hydrogen bromide, resulting in the PDMS macroinitiators for the ATRP of styrene (St). The latter procedure was carried out at 130°C in a phenyl ether solution with CuCl and 4, 4′‐di (5‐nonyl)‐2,2′‐bipyridine (dNbpy) as the catalyzing system. By using this technique, triblock copolymers consisting of a PDMS center block and polystyrene terminal blocks were synthesized. The polymerization was controllable; ATRP of St from those macroinitiators showed linear increases in M_n with conversion. The block copolymers were characterized with IR and ¹H‐NMR. The effects of molecular weight of macroinitiators, macroinitiator concentration, catalyst concentration, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP are reported. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3764–3770, 2004     

Synthesis and characterization of poly(n‐butyl methacrylate)‐b‐polystyrene diblock copolymers by atom transfer radical emulsion polymerization

Poly(n‐butyl methacrylate) (PBMA)‐b‐polystyrene (PSt) diblock copolymers were synthesized by emulsion atom transfer radical polymerization (ATRP). PBMA macroinitiators that contained alkyl bromide end groups were obtained by the emulsion ATRP of n‐butyl methacrylate with BrCH₃CHCOOC₂H₅ as the initiator; these were used to initiate the ATRP of styrene (St). The latter procedure was carried out at 85°C with CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine as the catalyst and polyoxyethylene(23) lauryl ether as the surfactant. With this technique, PBMA‐b‐PSt diblock copolymers were synthesized. The polymerization was nearly controlled; the ATRP of St from the macroinitiators showed linear increases in number‐average molecular weight with conversion. The block copolymers were characterized with IR spectroscopy, ¹H‐NMR, and differential scanning calorimetry. The effects of the molecular weight of the macroinitiators, macroinitiator concentration, catalyst concentration, surfactant concentration, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP are also reported. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2123–2129, 2005     

Synthesis and characterization of polystyrene‐b‐poly(ethylene oxide)‐b‐polystyrene triblock copolymers by atom‐transfer radical polymerization

Well‐defined polystyrene (PS)‐b‐poly(ethylene oxide) (PEO)‐b‐PS triblock copolymers were synthesized by atom‐transfer radical polymerization (ATRP), using C—X‐end‐group PEO as macroinitiators. The triblock copolymers were characterized by infrared spectroscopy, nuclear magnetic resonance spectroscopy, and gel permeation chromatography. The experimental results showed that the polymerization was controlled/living. It was found that when the number‐average molecular weight of the macroinititors increased from 2000 to 10,000, the molecular weight distribution of the triblock copolymers decreased roughly from 1.49 to 1.07 and the rate of polymerization became much slower. The possible polymerization mechanism is discussed. According to the Cu content measured with atomic absorption spectrometry, the removal of catalysts, with CHCl₃ as the solvent and kaolin as the in situ absorption agent, was effective. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2882–2888, 2000     

Synthesis of defined polyhedral oligosilsesquioxane‐containing diblock and triblock methacrylate copolymers by atom transfer radical polymerization

Defined diblock and triblock copolymers composed of methyl methacrylate‐co‐glycidyl methacrylate block and 3‐{3,5,7,9,11,13,15‐hepta(2‐methylpropyl)‐pentacyclo[9.5.1.1^3,9.1^5,15.1^7,13]‐octasiloxan‐1‐yl}propyl methacrylate block(s), i.e., P(MMA‐co‐GMA)‐b‐PiBuPOSSMA and PiBuPOSSMA‐b‐P(MMA‐co‐GMA)‐b‐PiBuPOSSMA, were synthesized by atom transfer radical polymerization (ATRP). First, monofunctional and bifunctional P(MMA‐co‐GMA) copolymers were synthesized by ATRP. Subsequently, these copolymers were successfully used as macroinitiators for ATRP of POSS‐containing methacrylate monomer. The process showed high initiation efficiency of macroinitiators and led to products with low dispersity. The synthesized block copolymers were characterized by size exclusion chromatography, ¹H‐NMR spectroscopy and their glass transition temperatures were determined by differential scanning calorimetry. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis of poly(octadecyl acrylate‐b‐styrene‐b‐octadecyl acrylate) triblock copolymer by atom transfer radical polymerization

The synthesis of triblock copolymer poly(octadecyl acrylate‐b‐styrene‐b‐octadecyl acrylate), using atom transfer radical polymerization (ATRP), is reported. The copolymers were prepared in two steps. First, polystyrene was synthesized by ATRP using α,α′‐dichloro‐p‐xylene/CuBr/bpy as the initiating system; Second, polystyrene was further used as macroinitiator for the ATRP of octadecyl acrylate to prepare ABA triblock copolymers in the presence of FeCl₂·4H₂O/PPh₃ in toluene. Polymers with controlled molecular weight (M_n = 17,000–23,400) and low polydispersity index value (1.33–1.44) were obtained. The relationship between molecular weight versus conversion showed a straight line. The effect of reaction temperature on polymerization was also investigated, showing a faster polymerization rate under higher temperature. The copolymers were characterized by FTIR, ¹H‐NMR, DSC, and GPC and the crystallization behavior of the copolymers was also studied. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1539–1545, 2004     

原子转移自由基聚合制备两亲性聚乳酸嵌段共聚物

以双端羟基聚乳酸和2-溴丙酰溴为原料,制备了溴端基的聚乳酸;再以此作为大分子引发剂,溴化亚铜／2,2’-联吡啶为催化体系,实现了N-乙烯基吡咯烷酮的原子转移自由基聚合,制得了两亲性聚乳酸嵌段共聚物。用IR、^1H-NMR、GPC和接触角测定仪对聚合物的结构和亲水性进行了表征,并用TEM研究了聚合物在水溶液中的聚集状态。结果表明,聚乙烯基吡咯烷酮链段的引人,大大提高了聚乳酸共聚物的亲水性,且共聚物在水相中可形成一壳多核球状胶束。     

Nanoscale structure of SAN-PEO-SAN triblock copolymers synthesized by atom transfer radical polymerization

Low molecular weight triblock copolymers (TBCs) with poly(styrene-co-acrylonitrile) (SAN) end-blocks and poly(ethylene oxide) (PEO), poly(propylene oxide) (PPO) or polycaprolactone (PCL) mid-blocks were synthesized using atom transfer radical polymerization (ATRP). The influence of molecular weight, composition (mid-block mole fraction), and interaction parameter on the crystallinity and on the formation of an ordered nanoscale phase-separated structure was investigated using thermal analysis, X-ray scattering, and electron microscopy. The TBCs with PEO mole fractions of over 0.5 exhibited PEO crystallinities of around 40% (compared to 72% for the PEO homopolymer) and lamellar nanoscale periodicities of around 176 Å (compared to 143 Å for the PEO homopolymer). The TBCs with PEO, PCL or PPO mole fractions of less than 0.5 exhibited relatively low crystallinities and did not exhibit ordered structures. These results emphasize the importance of the mid-block mole fraction in determining the ability to form an ordered nanoscale structure through mid-block crystallization. The ordered structure disappeared on heating the TBCs above the mid-block melting point, but below the SAN glass transition temperature. The crystallinity was reduced significantly in TBCs that were annealed or cast from a solvent.     

Synthesis of triblock and random copolymers of 4-acetoxystyrene and styrene by living atom transfer radical polymerization

Triblock copolymers containing polystyrene (PSt) and poly(4-acetoxystyrene) (PAcOSt) segments have been prepared by atom transfer radical polymerization (ATRP). In the first step one of the two monomers was polymerized in bulk using the initiating system α,α′-dibromo-p-xylene/CuBr/2,2′-bipyridine (1/1/3). Subsequently the resulting telechelic polymers with active bromo end group structures were used as macroinitiators for the polymerization of the second monomer under ATRP conditions. This process gave PAcOSt-PSt-PAcOSt and PSt-PAcOSt-PSt triblock copolymers with predetermined molecular weights and narrow molecular weight distributions. Polymerization of a mixture of equal molar amounts of the two monomers yielded a random copolymer with narrow molecular weight distribution. Received: 25 June 1997/Revised: 25 August 1997/Accepted: 8 September 1997     

利用原子转移自由基聚合制备水溶性含氟嵌段共聚物

利用原子转移自由基聚合技术合成了相对分子质量可控,相对分子质量分布较窄的丙烯酸叔丁酯与氟烷基（甲基）丙烯酸酯的嵌段共聚物。进一步将嵌段共聚物的丙烯酸叔丁酯链段在酸性条件下水解,制备了水溶性含氟嵌段共聚物,借助核磁共振氢谱和红外光谱对嵌段共聚物进行了表征。     

Uniform star‐polystyrene nanoparticles prepared by emulsion atom transfer radical polymerization

Pentaerythritol (PT) was converted into four‐arm initiator pentaerythritol tetrakis(2‐chloropropionyl) (PT‐Cl) via reaction with 2‐chloropropionyl chloride. Uniform (monodisperse) star‐polystyrene nanoparticles were prepared by emulsion atom transfer radical polymerization of styrene, using PT‐Cl/CuCl/bpy (bpy is 2,2′‐dipyridyl) as the initiating system. The structures of PT‐Cl and polymer were characterized by Fourier transform infrared spectroscopy and nuclear magnetic resonance. The morphology, size and size distribution of the star‐polystyrene nanoparticles were characterized by transmission electron microscopy, atomic force microscopy and photon correlation spectroscopy. It was found that the average diameters of star‐polystyrene nanoparticles were smaller than 100 nm (30–90 nm) and monodisperse; moreover, the particle size could be controlled by the monomer/initiator ratio and the surfactant concentration. The average hydrodynamic diameter (D_h) of the nanoparticles increased gradually on increasing the ratio of styrene to PT‐Cl and decreased on enhancing the surfactant concentration or increasing the catalyst concentration. Copyright © 2011 Society of Chemical Industry     

Synthesis and characterization of pH/temperature-sensitive block copolymers via atom transfer radical polymerization

In order to prepare well-defined pH-sensitive block copolymers with a narrow molecular weight distribution (MWD), we synthesized a pH-sensitive block copolymer via atom transfer radical polymerization (ATRP) of sulfamethazine methacrylate monomer (SM) and amphiphilic diblock copolymers by the ring-opening polymerization of d,l-lactide/?-caprolactone (LA/CL), and their sol-gel phase transition was investigated. SM, which is a derivative of sulfonamide, was used as a pH responsive moiety, while PCLA-PEG-PCLA was used as a biodegradable, as well as a temperature sensitive one, amphiphilic triblock copolymer. The pentablock copolymer, OSM-PCLA-PEG-PCLA-OSM, was synthesized using Br-PCLA-PEG-PCLA-Br as an ATRP macroinitiator. The number average molecular weights of SM were controlled by adjusting the monomer/initiator feed ratio. The macroinitiator was synthesized by the coupling of 2-bromoisobutyryl bromide with PCLA-PEG-PCLA in the presence of triethyl amine catalyst in dichloromethane. The resultant block copolymer shows a narrow polydispersity. The block copolymer solution shows a sol-gel transition in response to a slight pH change in the range of 7.2-8.0. Gel permeation chromatography (GPC) and NMR were used for the characterization of the polymers that were synthesized.     

苯乙烯/丙烯酸丁酯反向原子转移自由基乳液聚合的合成与表征

采用Tween 80为乳化剂,FeCl3.6H2O/EDTA/AIBN为催化引发体系,在乳液体系中对苯乙烯、丙烯酸丁酯进行反向原子转移自由基(RATRP)共聚合。考察了原料加入方式、过渡金属催化剂浓度及反应温度对RATRP乳液聚合影响。结果表明,得到聚合物的分子量与单体转化率呈线性增长,分子量分布较窄(PDI为1.40)的无规共聚物。借助于凝胶渗透色谱(GPC)和红外光谱仪(IR)对RATRP共聚乳液进行表征,表明加入催化体系进行RA-TRP乳液聚合是"活性"可控聚合。     

Studies on atom transfer radical emulsion polymerization of n‐butyl methacrylate

Atom transfer radical polymerization (ATRP) of n‐butyl methacrylate (BMA) in water‐borne media, catalyzed and initiated by CuCl/4,4′‐di (5‐nonyl)‐2,2′‐bipyridine (dNbpy) and Ethyl 2‐bromopropinate (BrCH₃CHCOOC₂H₅₎ was conducted. The influence of several factors, such as the amount of surfactant, catalyst, initiator and the reaction time, temperature on the stability of the latexes and the control of the polymerization was investigated. The nucleation mechanism of the latexes, thermodynamic data and activation parameters for the ATRP emulsion polymerization of BMA were also reported. POLYM. ENG. SCI. 45:297–302, 2005. © 2005 Society of Plastics Engineers.     

Synthesis and characterization of novel polystyrene‐block‐polyurethane‐block‐polystyrene tri‐block copolymers through atom transfer radical polymerization

Background: Radical polymerization is used widely to polymerize more than 70% of vinyl monomers in industry, but the control over molecular weight and end group of the resulting polymers is always a challenging task with this method. To prepare polymers with desired molecular weight and end groups, many controlled radical polymerization (CRP) ideas have been proposed over the last decade. Atom transfer radical polymerization (ATRP) is one of the successful CRP techniques. Using ATRP, there is no report on the synthesis of polystyrene‐block‐polyurethane‐block‐polystyrene (PSt‐b‐PU‐b‐PSt) tri‐block copolymers. Hence this paper describes the method of synthesizing these tri‐block copolymers. To accomplish this, first telechelic bromo‐terminated polyurethane was synthesized and used further to synthesize PSt‐b‐PU‐b‐PSt tri‐block copolymers using CuBr as a catalyst and N,N,N,N″,N″‐pentamethyldiethylenetriamine as a complexing agent. Results: The ‘living’ nature of the initiating system was confirmed by linear increase of number‐average molecular weight and conversion with time. A semi‐logarithmic kinetics plot shows that the concentration of propagating radical is steady. The results from nuclear magnetic resonance spectroscopy, gel permeation chromatography and differential scanning calorimetry show that the novel PSt‐b‐PU‐b‐PSt tri‐block copolymers were formed through the ATRP mechanism. Conclusion: For the first time, PSt‐b‐PU‐b‐PSt tri‐block copolymers were synthesized through ATRP. The advantage of this method is that the controlled incorporation of polystyrene block in polyurethane can be achieved by simply changing the polymerization time. Copyright © 2007 Society of Chemical Industry     

Graft copolymers and high‐molecular‐weight star‐like polymers by atom transfer radical polymerization

Grafting of tert‐butyl acrylate (tBuA), methyl methacrylate (MMA), and styrene (St) monomers (M) by Cu(I)‐mediated ATRP from polystyrene (PSt) macroinitiator (M_n = 5620, polydispersity index, PDI = 1.12), containing initiating 2‐bromopropionyloxy groups (I) (bound to 34% of aromatic cores; 11 groups per backbone), was performed using conditions suitable for the respective homopolymerizations. The preparation of PSt‐g‐PtBuA in bulk using an initial molar ratio [M]₀/[I]₀ = 140 had a controlled character up to M_n = (132–148) × 10³ (PDI = 1.08–1.16). With MMA and St and using the same [M]₀/[I]₀, preliminary experiments were made; the higher the monomer conversion, the broader was the distribution of molecular weight of the products. Graft copolymerizations of all these monomers at [M]₀/[I]₀ = 840 or 1680 were successfully conducted up to high conversions. Low‐polydispersity copolymers, with very long side chains, in fact star‐like copolymers, were obtained mainly by tuning the deactivator amount in the reaction mixture. (PSt‐g‐PtBuA, DP_n,sc (DP of side chain) = 665, PDI = 1.24; PSt‐g‐PMMA, DP_n,sc = 670, PDI = 1.43; PSt‐g‐PSt, DP_n,sc = 324, PDI = 1.11). Total suppression of intermolecular coupling was achieved here. However, the low concentrations of initiator required long reaction times, leading sometimes to formation of a small amount (～5%) of low‐molecular‐weight polymer fraction. This concomitant process is discussed, and some measures for its prevention are proposed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3662–3672, 2006     

Synthesis and characterization of PS‐b‐PDMS‐b‐PS triblock copolymer

A series of polystyrene‐b‐poly(dimethylsiloxane)‐b‐polystyrene (PS/PDMS/PS) triblock copolymers had been synthesized by atom transfer radical polymerization (ATRP). The products had been characterized by Fourier transform infrared, gel permeation chromatography, differential scanning calorimetry, thermogravimetric analysis, contact angle, and scanning electron microscope. The results indicate that the PS chains have been successfully blocked onto the PDMS back bone, and the PS‐b‐PDMS‐b‐PS triblock copolymers have low‐surface tension, good thermal stability, and microphase separation configuration. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and characterization of PSt‐b‐PHEMA metal hybrids

The block copolymer polystyrene‐b‐poly[2‐(trimethylsilyloxy)ethylene methacrylate] (PSt‐b‐PTMSEMA) was synthesized using atom‐transfer radical polymerization (ATRP). The hydrolysis of PSt‐b‐PTMSEMA led to the formation of an amphiphilic block copolymer, polystyrene‐b‐poly(2‐hydroxylethyl methacrylate) (PSt‐b‐PHEMA), which was characterized by GPC and ¹H‐NMR. TEM showed that the PSt‐b‐PHEMA formed a micelle, which is PSt as the core and PHEMA as the shell. Under appropriate conditions, the nickel or cobalt ion cause chemical reactions in these micelles and could be reduced easily. ESCA analysis showed that before reduction the metal existed as a hydroxide; after reduction, the metal existed as an oxide, and the metal content of these materials on the surface is more than that on the surface of the copolymer metal ion. XRD analysis showed that the metal existed as a hydroxide before reduction and existed as a metal after reduction. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2883–2891, 2002; DOI 10.1002/app.10278     

原子转移自由基乳液聚合研究进展

原子转移自由基聚合(ATRP)作为一种可控/活性聚合方法,可对聚合物结构进行精确控制;乳液聚合以水作为分散介质,具有经济、环保等特点。因此,乳液ATRP结合了两者的优点,具有工业化生产的潜力。首先分析了影响乳液ATRP的各种因素,然后综述了正向ATRP、RATRP(反向ATRP)、SR&NI ATRP(正向/反向同时进行的ATRP)和AGET ATRP(电子转移活化剂ATRP)等机制及研究进展,最后对乳液ATRP的发展方向进行了展望。