Synthesis and photo-induced transformation of helical aromatic polyamides consisting of axially dissymmetric biphenylene joints and azobenzene segments in the backbone

Wholly aromatic polyamides having a novel helical structure were prepared by the reaction of axially dissymmetric (R)- or (S)-6,6′-dimethylbiphenyl-2,2′-dicarbonyl chloride with aromatic diamines, which are soluble in common solvents such as tetrahydrofuran and N,N-dimethylformamide. Photo-irradiation of a tetrahydrofuran solution of the polymer obtained with 4,4′-diaminoazobenzene induced a change of the helical conformation because of the trans–cis isomerization of the azobenzene units in the polymer chain. No change in the specific rotation of the polymer was observed on heating at 100°C for 4h, indicating thermal stability of its helical structure. CD spectra showed that the helical conformation was maintained in methanesulphonic acid. © 1998 SCI.     

Synthesis and characterization of novel aromatic polyamides derived from 2,2′‐bis(p‐phenoxyphenyl)‐4, 4′‐diaminodiphenyl ether

BACKGROUND: Wholly aromatic polyamides (aramids) are high‐performance polymeric materials with outstanding heat resistance and excellent chemical stabilities due to chain stiffness and intermolecular hydrogen bonding of amide groups. Synthesis of structurally well‐designed monomers is an effective strategy to prepare modified forms of these aramids to overcome lack of organo‐solubility and processability limitations. RESULTS: A novel class of wholly aromatic polyamides was prepared from a new diamine, namely 2,2′‐bis(p‐phenoxyphenyl)‐4,4′‐diaminodiphenyl ether (PPAPE), and two simple aromatic dicarboxylic acids. Two reference polyamides were also prepared by reacting 4,4′‐diaminodiphenyl ether with the same comonomers under similar conditions. M?_w and M?_n of the resultant polymers were 8.0 × 10⁴ and 5.5 × 10⁴ g mol^?1, respectively. Polymers resulting from PPAPE exhibited a nearly amorphous nature. These polyamides exhibited excellent organo‐solubility in a variety of polar solvents and possessed glass transition temperatures up to 200 °C. The 10% weight loss temperatures of these polymers were found to be up to 500 °C under a nitrogen atmosphere. The polymers obtained from PPAPE could be cast into transparent and flexible films from N,N‐dimethylacetamide solution. CONCLUSION: The results obtained show that the new PPAPE diamine can be considered as a good monomer to enhance the processability of its resultant aromatic polyamides while maintaining their high thermal stability. The observed characteristics of the polyamides obtained make them promising high‐performance polymeric materials. Copyright © 2009 Society of Chemical Industry     

Influence of moieties on morphology,thermal, and dielectric properties in polyamide‐polyhedral oligomeric silsequioxanes nanocomposites

A series of new hexafluoroisopropylidene, isopropylidene, carbonyl, and ether moieties substituted polyamides have been prepared from aromatic diamines and various moieties substituted aromatic dianhydrides. The synthesized polyamides were readily soluble in polar solvents such as N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfoxide. These polyamides exhibited good thermal stability and high char yields. The chemical and physical properties of the newly prepared polyamide‐polyhedral oligomeric silsequioxanes (PA‐POSS) were compared in terms of their chemical structures and thermal properties. The morphological properties of the polymeric nanocomposites depend both on their chemical structure of dianhydride and the aggregation of POSS were investigated by scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. Polyamides with bulky POSS and ?uoro groups can effectively decrease dielectric constants. The dielectric constants of PA‐POSS were found to be decreased from 3.75 to 3.29 by changing the substitution. These polyamides showed good thermal stability up to 353 °C for a 10 % weight loss. The fluorinated polyamides have relatively higher thermal stability than the polyamides without halogen because of high bond energy of C? F bond. The fiuorinated groups in the polymer backbone have played an important role in the improvement of dielectric performance of polymers. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Synthesis and properties of novel polyamides containing sulfone‐ether linkages and xanthene cardo groups

In order to obtain polyamides with enhanced solubility and processability, as well as good mechanical and thermal properties, several novel polyamides containing sulfone‐ether linkages and xanthene cardo groups based on a new diamine monomer, 9,9‐bis[4‐(4‐aminophenoxy)phenyl]xanthene (BAPX), were investigated. The BAPX monomer was synthesized via a two‐step process consisting of an aromatic nucleophilic substitution reaction of readily available 4‐chloronitrobenzene with 9,9‐bis(4‐hydroxyphenyl)xanthene in the presence of potassium carbonate in N,N‐dimethylformamide, followed by catalytic reduction with hydrazine and Pd/C. Four novel aromatic polyamides containing sulfone‐ether linkages and xanthene cardo groups with inherent viscosities between 0.98 and 1.22 dL g^?1 were prepared by low‐temperature polycondensation of BAPX with 4,4′‐sulfonyldibenzoyl chloride, 4,4′‐[sulfonyl‐bis(4‐phenyleneoxy)]dibenzoyl chloride, 3,3′‐[sulfonyl‐bis(4‐phenyleneoxy)]dibenzoyl chloride and 4,4′‐[sulfonyl‐bis(2,6‐dimethyl‐1,4‐phenyleneoxy)]dibenzoyl chloride in N,N‐dimethylacetamide (DMAc) solution containing pyridine. All these new polyamides were amorphous and readily soluble in various polar solvents such as DMAc and N‐methylpyrrolidone. These polymers showed relatively high glass transition temperatures in the range 238–298 °C, almost no weight loss up to 450 °C in air or nitrogen atmosphere, decomposition temperatures at 10% weight loss ranging from 472 to 523 °C and 465 to 512 °C in nitrogen and air, respectively, and char yields at 800 °C in nitrogen higher than 50 wt%. Transparent, flexible and tough films of these polymers cast from DMAc solution exhibited tensile strengths ranging from 78 to 87 MPa, elongations at break from 9 to 13% and initial moduli from 1.7 to 2.2 GPa. Primary characterization of these novel polyamides shows that they might serve as new candidates for processable high‐performance polymeric materials. Copyright © 2010 Society of Chemical Industry     

Synthesis and characterization of novel aromatic polyamides via Yamazaki–Higashi phosphorylation method

We synthesized four aromatic diacids: 1,3‐bis(3‐carboxyphenoxy)benzene, 1,4‐bis(4‐carboxyphenoxy)benzene, 1,4‐bis(3‐carboxyphenoxy) benzene, and 1,3‐bis(4‐carboxyphenoxy)benzene, following a procedure of a previously reported synthesis (Ueda and Komatsu, J Polym Sci Part A: Polym Chem 1989, 27, 1017). These diacids were condensed directly with aromatic diamines 4,4′‐oxydianiline (ODA), via the Yamazaki–Higashi phosphorylation method in the presence of triphenylphosphite (TPP), pyridine (Py) and halide salts to give high molecular aromatic polyamides (PAs). The synthesized PAs were obtained in quantitative yields with inherent viscosities between 0.5 and 1.0 dL g^?1. The structures and properties of the obtained PAs were characterized by Fourier transform infrared (FTIR) spectra, nuclear magnetic resonance (NMR), thermogravimetric analysis (TGA), polarizing optical microscope (POM). Four PAs all showed good solubility in polar solvents, such as dimethylsulfoxide (DMSO), N,N‐dimethylacetamide (DMAc), N‐dimethylformamide (DMF), 1‐methylpyrrolidone (NMP), and so on. The obtained polymers showed high thermal stability with decomposition temperature around 400°C. The polyamide membranes manifest excellent mechanical properties, with Young's modulus of 2.5–5.5 GPa. Interestingly, the film of PA‐1, PA‐2, and PA‐3 is completely transparent in the visible range, while PA‐4 film is opaque. Crystallization was observed in PA‐4 film, although the molecular structure of PA‐4 is not as symmetrical as PA‐2. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and properties of novel soluble polyamides containing both fluorene or xanthene cardo moieties and fluorinated phenoxy pendant groups

A series of novel aromatic polyamides containing both fluorene or xanthene cardo moieties and fluorinated phenoxy pendant groups were synthesized from two fluorinated isophthaloyl chlorides and four diamines containing cardo groups by the low‐temperature solution polycondensation in N,N‐dimethylacetamide (DMAc). The obtained polymers were characterized by different physicochemical techniques. All the polymers were amorphous and readily soluble in many organic solvents such as DMAc, N‐methyl‐2‐pyrrolidinone, N,N‐dimethylformamide, dimethyl sulfoxide, pyridine, and tetrahydrofuran at room temperature. The new fluorinated polyamides had high thermal stability with the glass transition temperatures of 237–259°C, the temperatures at 5% weight loss of 437–476°C in nitrogen. All the polymers formed transparent, strong, and flexible films with tensile strengths of 70.6–87.5 MPa, tensile moduli of 2.23–2.78 GPa, and elongations at break of 5.8–8.7%. These polyamide films had high optical transparency with an ultraviolet–visible absorption cutoff wavelength of 352–368 nm, low dielectric constants of 3.24–3.45 (1 MHz), and lower water absorptions of 1.06–1.43%. POLYM. ENG. SCI., 57:1234–1241, 2017. © 2017 Society of Plastics Engineers     

Synthesis and characterization of aromatic polyamides containing an s‐triazine ring with thiophenoxy linkages

A series of aromatic polyamides containing an s‐triazine ring with thiophenoxy linkages was synthesized from two new diacids, namely 2,4‐bis‐(4‐carboxyphenoxy)‐6‐thiophenoxy‐s‐triazine and 2,4‐bis‐(3‐carboxyphenoxy)‐6‐thiophenoxy‐s‐triazine, and commercially available aromatic diamines by using Yamazaki's phosphorylation reaction. The polyamides were obtained in good yields and were characterized by solubility tests, viscosity measurements, FTIR, ¹H and ¹³C NMR spectroscopy, X‐ray diffraction studies and thermogravimetric analysis. The polyamides were found to have inherent viscosities in the range of 0.35 to 0.56 dl g^?1 in N,N‐dimethylacetamide (DMAc) at 30 ± 0.1 °C. All the polyamides were readily soluble in solvents such as DMAc, N‐methyl‐2‐pyrrolidone (NMP), N,N‐dimethylformamide (DMF) and m‐cresol. Thermogravimetric analysis of the polyamides indicated no weight loss below 345 °C under a nitrogen atmosphere. Copyright © 2004 Society of Chemical Industry     

Synthesis and properties of polyamides based on 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐hexahydro‐4,7‐methanoindan

A new diamine 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐hexahydro‐4,7‐methanoindan ( 3 ) was prepared through the nucleophilic displacement of 5,5′‐bis(4‐hydroxylphenyl)‐hexahydro‐4,7‐methanoindan ( 1 ) with p‐halonitrobenzene in the presence of K₂CO₃ in N,N‐dimethylformamide (DMF), followed by catalytic reduction with hydrazine and Pd/C in ethanol. A series of new polyamides were synthesized by the direct polycondensation of diamine 3 with various aromatic dicarboxylic acids. The polymers were obtained in quantitative yields with inherent viscosities of 0.76–1.02 dl g⁻¹. All the polymers were soluble in aprotic dipolar solvents such as N,N‐dimethylacetamide (DMAc) and N‐methyl‐2‐pyrrolidone (NMP), and could be solution cast into transparent, flexible and tough films. The glass transition temperatures of the polyamides were in the range 245–282 °C; their 10% weight loss temperatures were above 468 °C in nitrogen and above 465 °C in air. © 2000 Society of Chemical Industry     

Synthesis and characterization of polyamides and poly(amide‐imide)s derived from 2,6‐bis(3‐aminophenoxy)benzonitrile or 2,6‐bis(4‐aminophenoxy)benzonitrile

A series of polyamides and poly(amide‐imide)s was prepared by direct polycondensation of ether and nitrile group containing aromatic diamines with aromatic dicarboxylic acids and bis(carboxyphthalimide)s respectively in N‐methyl 2‐pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. New diamines, such as 2,6‐bis(4‐aminophenoxy)benzonitrile and 2,6‐bis(3‐aminophenoxy)benzonitrile, were prepared from 2,6‐dichlorobenzonitrile with 4‐aminophenol and 3‐aminophenol, respectively, in NMP using potassium carbonate. Bis(carboxyphthalimide)s were prepared from the reaction of trimellitic anhydride with various aromatic diamines in N,N′‐dimethyl formamide. The inherent viscosities of the resulting polymers were in the range of 0.27 to 0.93 dl g^?1 in NMP and the glass transition temperatures were between 175 and 298 °C. All polymers were soluble in dipolar aprotic solvents such as dimethylsulfoxide, dimethylacetamide and NMP. All polymers were stable up to 350 °C with a char yield of above 40 % at 900 °C in nitrogen atmosphere. All polymers were found to be amorphous except the polyamide derived from isophthalic acid and the poly(amide‐imide)s derived from diaminodiphenylether and diaminobenzophenone based bis(carboxyphthalimide)s. Copyright © 2004 Society of Chemical Industry     

Assessment of random aromatic co‐polyamides containing two different bulky pendant groups

This work reports the synthesis and assessment of random aromatic co‐polyamides containing two different bulky pendant groups. The random aromatic co‐polyamides are synthesized combining the monomers 5‐tert‐butylisophthalic acid and 5‐(9,10‐dihydro‐9,10‐ethanoanthracene‐11,12‐dicarboximido)isophthalic acid with three different diamines. The random aromatic co‐polyamides are readily soluble and possess inherent viscosities in the range of 0.47–0.60 dL g⁻¹. Co‐polyamide dense membranes are amorphous, and flexible with both good tensile strength (56.2–57.5 MPa) and tensile modulus (1.3–1.6 GPa). Permeability coefficients of the co‐polyamide dense membranes are assessed for the gases He, O₂, N₂, CH₄, and CO₂. It is found that the combination of two bulky pendant groups, dibenzobarrelene and tert‐butyl, in the backbone of the co‐polyamides improves the gas permeability coefficient in comparison with their corresponding homopolyamides. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45884.     

Optical resolution of racemic amino acid derivatives with chiral polyamides bearing glutamyl residue as a diacid component

Novel chiral polyamides with chiral environment in their main chains were obtained from aromatic diamine, 4,4′‐diaminodiphenylmethane (DADPM), and the D ‐isomer or the L ‐isomer of N‐α‐protected glutamic acid, such as N‐α‐benzyloxycarbonyl‐D ‐glutamic acid (Z‐D ‐Glu‐OH) or N‐α‐benzyloxycarbonyl‐L ‐glutamic acid (Z‐L ‐Glu‐OH), in the presence of triphenyl phosphite (TPP). Two types of newly prepared polyamide showed optical rotation, implying that there were asymmetric carbons in their main chains. Circular dichroism studies demonstrated that resulting chiral poly‐ amides took a helical structure. Optical resolution ability of those two types of polyamide was studied by adopting potential difference as a driving force for membrane transport. Membranes showed permselectivity toward racemic mixture of N‐α‐acetyltryptophan (Ac‐Trp). The permselectivity was dependent on the absolute configuration of diacid component. The permselectivity was expressed by diffusivity selectivity, which was determined by the presence of chiral helicity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis,characterization, and properties of novel fluorine containing aromatic polyamides

A series of novel fluorine containing aromatic polyamides were synthesized by the direct polycondensation of various fluorine containing aromatic diamines and commercially available 5‐t‐butyl isophthalic acid. These polyamides have good solubility in several organic solvents such as dimethylformamide, N,N‐dimethylacetamide, 1‐Methyl‐2‐pyrrolidone, dimethyl sulfoxide, and tetrahydrofuran. The synthesized polymers exhibited inherent viscosities up to 0.93 dL/g and M_w up to 1,52,000 with PDI of 2.49. The polyamides exhibited good thermal stability up to 489°C for 10% weight loss in nitrogen and high glass transition temperature up to 273°C. Dynamic mechanical analysis showed a very good retention of storage modulus up to the glass transition temperature. The tan δ peak value at 1 Hz was used to calculate the T_g and these values are in good agreement with differential scanning calorimetry data. The polyamide films were flexible with tensile strength up to 72 MPa, elongations at break up to 14%, and modulus of elasticity up to 1.39 GPa depending on the exact repeating unit structure. X‐ray diffraction measurements indicate that these polyamides are semicrystalline. Rheology study showed same trend of melt viscosity behavior with different shear rate for all polymers. Water absorption study indicates the hydrophobic nature of the polymer. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Structure–property relationship in polybutadiene–polyamide multiblock copolymers

Two kinds of aromatic–aliphatic polyamide oligomers were newly prepared by the reactant pairs of 3,4′-oxydianiline–adipic acid and 3,4′-oxydianiline–azelaic acid. These oligomers were then condensed separately with α, ω-polybutadienedicarboxylic acid giving two series of polybutadiene–polyamide multiblock copolymers. Properties of four series of polybutadiene–polyamide multiblock copolymers, whose polyamide blocks consisted of not only newly prepared polyamides but also previously synthesized aromatic polyamides derived from 4,4′-oxydianiline–isophthalic acid and 3,4′-oxydianiline–isophthalic acid, were investigated on the view point of structure-property relationship. A larger extent of the T_g depression of polybutadiene phase, and higher tensile strength and modulus were observed in the block copolymers having aromatic polyamides compared with those having aliphatic ones.     

Synthesis and characterization of aromatic–aliphatic polyamides

A new monomer, 2,5‐bis(4‐carboxy methylene phenyl)‐3,4‐diphenyl thiophene (V) has been synthesized and characterized by physical and spectroscopic methods. A series of eight aromatic–aliphatic polyamides was prepared from the (V) and different aromatic diamines using Yamazaki's direct phosphorylation reaction. The polyamides were characterized by IR spectroscopy, viscosity measurements, and thermal analysis. An excellent yield of these polyamides was obtained, with inherent viscosities in the range of 0.28 to 0.67 dL/g, and the polyamide were readily soluble in aprotic polar solvents such as N‐methyl‐2‐pyrrolidone, N‐N‐dimethyl acetamide, dimethyl sulphoxide, and so forth. Polyamides could be cast into transparent and flexible films. They had glass‐transition temperatures of 225–273°C. When evaluated by thermogravimetry, thermal analysis of the polyamides showed no weight loss below 311°C, and the char yield in air at 900°C was 55%–67%. The structure–property correlation among these polyamides is also discussed. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 566–571, 2001     

Synthesis and characterization of new polyamides derived from 4‐(4′‐aminophenyl)urazole and aliphatic diacid chlorides

4‐(4′‐Aminophenyl)urazole (AmPU) was prepared from 4‐nitrobenzoic acid in six steps. The reaction of AmPU with acetyl chloride was performed in N,N‐dimethylacetamide solutions at different ratios, and the resulting disubstituted and trisubstituted amide derivatives were obtained in high yields and were used as models for polymerization reactions. Polycondensation reactions of AmPU with succinyl chloride, suberoyl chloride, and sebacoyl chloride were performed with conventional solution polymerization techniques in the presence of different catalysts, such as pyridine, triethylamine, and dibutyltin dilaurate, and led to the formation of novel aliphatic polyamides. The resulting novel polyamides had inherent viscosities of 0.11–0.22 dL/g in dimethylformamide or H₂SO₄ at 25°C. These polyamides were characterized with IR, ¹H‐NMR, elemental analysis, and thermogravimetric analysis. Some physical properties and structural characterization of these novel polyamides are reported. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3173–3185, 2004     

Synthesis and properties of novel aromatic polyamides derived from 2,2‐bis[4‐(4‐amino‐2‐fluorophenoxy) phenyl]hexafluoropropane and aromatic dicarboxylic acids

A series of polyamides were synthesized by the direct polycondensation of 2,2‐bis[4‐(4‐amino‐2‐fluorophenoxy)phenyl]hexafluoropropane with various commercially available dicarboxylic acids such as terephthalic acid, isophthalic acid, 5‐t‐butyl isophthalic acid, and 2,6‐naphthalene dicarboxylic acid. The synthesized polyamides were soluble in several organic solvents such as N,N‐dimethylformamide, N,N‐dimethylacetamide, dimethyl sulfoxide, tetrahydrofuran, and chloroform, and they exhibited inherent viscosities of 0.42–0.59 dL/g. The polyamides exhibited weight‐average molecular weights of up to 26,000, which depended on the exact repeating unit structure. These polyamides showed good thermal stability up to 440°C for a 10% weight loss in synthetic air. The polyamides synthesized from 5‐t‐butyl isophthalic acid and isophthalic acid exhibited glass‐transition temperatures of 217 and 185°C, respectively (by differential scanning calorimetry) in nitrogen. The polyamides synthesized from terephthalic acid and 2,6‐naphthalene dicarboxylic acid showed melting temperatures of 319 and 385°C, respectively. The polyamides films were pale yellow, with tensile strengths of up to 82 MPa, moduli of elasticity of up to 2.3 GPa, and elongations at break of up to 9%, which depended on the exact repeating unit structure. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 691–696, 2003     

Synthesis and characterization of novel Schiff‐base polyamides from copper/benzil bisthiosemicarbazone complexes

A new copper‐containing Schiff‐base diamine, benzil bis(thiosemicarbazonato)copper(II) (CuLH₄), was synthesized in two steps from benzil bisthiosemicarbazone (LH₆). The ligand LH₆ and the complex CuLH₄ were characterized with Fourier transform infrared spectroscopy, ¹H‐NMR, and elemental analysis. CuLH₄ was used to prepare novel polyamides. The low‐temperature solution polycondensation of the complex CuLH₄ with various aromatic and aliphatic diacid chlorides afforded copper‐containing Schiff‐base polyamides with inherent viscosities of 0.25–0.36 dL/g in N,N‐dimethylformamide (DMF) and 0.75 dL/g in H₂SO₄ at 25°C. The polyamides were generally soluble in a wide range of solvents, such as DMF, N,N‐dimethylacetamide, tetrahydrofuran, dimethyl sulfoxide, ethyl acetate, tetrachloroethane, hexamethylene phosphoramide, N‐methylpyrrolidone, and pyridine. Thermal analysis showed that these polyamides were practically amorphous, decomposed above 270°C, and exhibited 50% weight loss at and above 400°C. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Permselectivities of 2,2′‐dimethyl‐4,4′‐bis(aminophenoxyl)biphenyl diphenyl methane–based aromatic polyamide membranes for aqueous alcohol mixtures in pervaporation and evapomeation

The separation of aqueous alcohol mixtures was carried out by use of a series of novel aromatic polyamide membranes. The aromatic polyamides were prepared by the direct polycondensation of 2,2′‐dimethyl‐4,4′‐bis(aminophenoxyl)biphenyl (DBAPB) with various aromatic diacids, such as terephthalic acid (TPAc), 5‐tert‐butylisophthalic acid (TBPAc), and 4,4′‐hexafluoroisopropylidenedibenzoic acid (FDAc). The pervaporation and evapomeation performance of these novel aromatic polyamide membranes for dehydrating aqueous alcohol solution were investigated. The solubility of ethanol in the aromatic polyamide membranes is higher than that of water, but the diffusivity of water through the membrane is higher than that of ethanol. The effect of diffusion selectivity on the membrane separation performances plays an important role in the evapomeation process. Compared with pervaporation, evapomeation effectively increases the permselectivity of water. Moreover, the effect of aromatic diacids on the polymer chain packing density, pervaporation, and evapomeation performance were investigated. It was found that the permeation rate could be increased by introduction of a bulky group into the polymer backbone. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2688–2697, 2003     

Synthesis and properties of novel poly(coumarin‐amide)s

A novel monomer diacid, 6,6′‐methylenebis(2‐oxo‐2H‐chromene‐3‐carboxylic acid), was synthesized and used in a direct polycondensation reaction with various aromatic diamines in N‐methyl‐2‐pyrrolidone solution containing dissolved LiCl and CaCl₂, using triphenyl phosphite and pyridine as condensing agents to give a series of novel heteroaromatic polyamides containing photosensitive coumarin groups in the main chain. Polyamide properties were investigated by DSC, TGA, GPC, wide‐angle X‐ray scattering, viscosity, and solubility measurements. The copolymers were soluble in aprotic polar solvents, and their inherent viscosities varied between 0.49 and 0.78 dL g^?1. The weight‐average and number‐average molecular weights, measured by gel permeation chromatography, were 27,500–43,900 g mol^?1 and 46,500–66,300 g mol^?1, respectively, and polydispersities in the range of 1.48–1.69. The aromatic polyamides showed glass‐transition temperatures (T_g) ranging from 283 to 329°C and good thermal properties evidenced by no significant weight loss up to 380°C and 10% weight loss recorded above 425°C in air. All the polyamides exhibited an amorphous nature as evidenced by wide‐angle X‐ray diffraction and demonstrated a film forming capability. Water uptake values up to 3.35% were observed at 65% relative humidity. These polymers exhibited strong UV‐vis absorption maxima at 357–369 nm in DMSO solution, and no discernible photoluminescence maxima were detected by exciting with 365 nm. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of novel photoactive polyamide derived from substituted fluorene by copper (I) catalyst

A novel polyamide has been successfully prepared through the reaction of 2,7‐dibromo‐9,9‐dioctylfluorene with 2,5‐dipiperazinedione in the presence of CuI, N,N′‐dimethylethylene diamine (DMEDA) and K₂CO₃ as base mixture and as catalyst. The structures of the monomer and the resulting model compound, as well as the structure, solution viscosity, solubility, molecular weights, thermal behavior, thermal stability, and light absorption and emission spectra of the resulting polyamide were characterized by means of FTIR, elemental analysis, ¹H‐NMR, ¹³C‐NMR, DSC, TGA, GPC and UV–visible absorption, and fluorescence emission spectrophotometers. The polyamide possesses excellent solubility in organic solvents such as tetrahydrofuran (THF), N‐methyl‐2‐pyrrolidone (NMP), N,N‐dimethylacetamide (DMAc), N,N‐dimethylformamide (DMF), ethylacetate, acetone, ethanol, pyridine, chloroform, and toluene at room temperature. The polyamide had inherent viscosity of 0.65 dL/g, and molecular weights of M_n= 4.25 × 10⁴ and M_w= 5.99 × 10⁴ g/mol. The polyamide had glass transition temperature (T_g) of 138°C, and 10% weight loss at 350°C in nitrogen. The polyamide showed strong UV absorption and blue emission in solution and in solid state. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009