Synthesis and characterization of a novel siloxane‐imide‐containing polybenzoxazine

A novel siloxane‐imide‐containing polybenzoxazine based on N,N′‐bis(N‐phenyl‐3,4‐dihydro‐2H‐benzo[1,3]oxazine)‐5, 5′‐bis(1,1′,3,3′‐tetramethyldisiloxane‐1,3‐diyl)‐bis(norborane‐2,3‐dicarboximide) (BZ‐A1) was successfully synthesized. The thermal properties of BZ‐A1 are superior to those of conventional polybenzoxazines lacking siloxane groups. Polymerized BZ‐A1 possesses extremely low surface free energy (γ_s = 15.1 mJ m^?2) after curing at 230 °C for 1 h. Moreover, the surface free energy of polymerized BZ‐A1 is more stable than conventional bisphenol A‐type polybenzoxazine during thermal curing and annealing processes, indicating that polymerized BZ‐A1 is more suitable for applications requiring low surface free energy materials for high temperatures over long periods of time. Copyright © 2010 Society of Chemical Industry     

Synthesis and characterization of high‐performance epoxy resin based on disiloxane and 4,4′‐oxybis(benzoic acid) ester

Epoxy‐terminated siloxane‐contained resin (BCDS/OBBA‐ETS) with high tensile strength and lap shear strength as well as good thermal stability was synthesized and characterized by ¹H‐NMR and Fourier transform infrared spectroscopy. Carboxy‐capped disiloxane‐4,4′‐oxybis (benzoic acid) ester oligomer (BCDS/OBBA) was firstly prepared from the reaction between 1,3‐bis(chloromethyl)‐1,1,3,3‐tetramethyl‐disiloxane and 4,4′‐oxybis(benzoic acid) (OBBA) in N,N‐dimethylformamide in the presence of triethylamine. Then, the BCDS/OBBA oligomer was reacted with epichlorohydrin to obtain the title BCDS/OBBA‐ETS resin. Cured with liquid polyamide L‐651, or diethylenetriamine, the mechanical and thermal properties as well as the lap shear strength of the BCDS/OBBA‐ETS resin were evaluated. The results indicated that the BCDS/OBBA‐ETS resin exhibited good thermal stability below 200°C, and the glass transition temperature (T_g) was about 64°C after cured with L‐651. The tensile strength of same cured BCDS/OBBA‐ETS resin was 27.46 MPa with a stain at break of 42.11%, and the lap shear strength for bonding stainless steel was 18.59 MPa. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Structural and Preliminary Explosive Property Characterizations of New 3,4,5‐Triamino‐1,2,4‐triazolium (Guanazinium) Salts

Two new highly stable energetic salts were synthesized in reasonable yield by using the high nitrogen‐content heterocycle 3,4,5‐triamino‐1,2,4‐triazole and resulting in its picrate and azotetrazolate salts. 3,4,5‐Triamino‐1,2,4‐triazolium picrate (1) and bis(3,4,5‐triamino‐1,2,4‐triazolium) 5,5′‐azotetrazolate (2) were characterized analytically and spectroscopically. X‐ray diffraction studies revealed that protonation takes place on the nitrogen N1 (crystallographically labelled as N2). The sensitivity of the compounds to shock and friction was also determined by standard BAM tests revealing a low sensitivity for both. B3LYP/6–31G(d, p) density functional (DFT) calculations were carried out to determine the enthalpy of combustion (Δ_cH (1) =−3737.8 kJ mol⁻¹, Δ_cH (2) =−4577.8 kJ mol⁻¹) and the standard enthalpy of formation (Δ_fH° (1) =−498.3 kJ mol⁻¹, (Δ_fH° (2) =+524.2 kJ mol⁻¹). The detonation pressures (P (1) =189×10⁸ Pa, P (2) =199×10⁸ Pa) and detonation velocities (D (1) =7015 m s⁻¹, D (2) =7683 m s⁻¹) were calculated using the program EXPLO5.     

Toughening of cyanate ester resin by N‐phenylmaleimide–N‐(p‐hydroxy)phenyl‐maleimide–styrene terpolymers and their hybrid modifiers

N‐Phenylmaleimide–N‐(p‐hydroxy)phenylmaleimide–styrene terpolymer (HPMS), carrying reactive p‐hydroxyphenyl groups, was prepared and used to improve the toughness of cyanate ester resins. Hybrid modifiers composed of N‐phenylmaleimide–styrene copolymer (PMS) and HPMS were also examined for further improvement in toughness. Balanced properties of the modified resins were obtained by using the hybrid modifiers. The morphology of the modified resins depends on HPMS structure, molecular weight and content, and hybrid modifier compositions. The most effective modification of the cyanate ester resin was attained because of the co‐continuous phase structure of the modified resin. Inclusion of the modifier composed of 10 wt% PMS (M_w 136 000 g mol^?1) and 2.5 wt% HPMS (hydroxyphenyl unit 3 mol%, M_w 15 500 g mol^?1) led to 135% increase in the fracture toughness (K_IC) for the modified resin with a slight loss of flexural strength and retention of flexural modulus and glass transition temperature, compared with the values for the unmodified resin. Furthermore, the effect of the curing conditions on the mechanical and thermal properties of the modified resins was examined. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviour of the modified cyanate ester resin system. © 2001 Society of Chemical Industry     

Synthesis of a new siloxane‐containing alicyclic dianhydride and the derived polyimides with improved solubility and hydrophobicity

The structural transformation strategy of cis‐5‐norbornene‐endo‐2,3‐dicarboxylic anhydride (NA) was performed by esterification. The double bond on the diester of NA showed adequate hydrosilylation reactivity with Si? H bonds of phenyl‐containing disiloxane. Thereby, a new siloxane‐containing alicyclic dianhydride, 5,5′‐exo‐(1,3‐dimethyl‐1,3‐diphenyl‐disiloxane‐1,5‐diyl)bisbicyclo[2,2,1]heptane‐2,3‐endo‐dicarboxylic anhydride 6 was successfully synthesized starting from NA, 1,3‐dimethyl‐1,3‐diphenyldisiloxane and platinum complex catalyst. The whole synthetic route of dianhydride 6 consisted of esterification, hydrosilylation, saponification, acidification, and dehydration. A series of polyimides (PIs) were prepared from dianhydride comonomers of 6 and 4,4′‐biphenyltetracarboxylic dianhydride (BPDA) in different molar ratio together with the diamine 4,4′‐oxydianiline (ODA). The thermal and mechanical properties of PIs showed somewhat decrease with increasing content of dianhydride 6. The solubility of PIs increased with the increasing content of dianhydride 6, and further calculation from Bragg's equation indicated that average interchain distance (d‐spacing value) increased with increasing content of siloxane and alicyclic segments in the backbone of PIs. It was revealed that the hydrophobicity of PIs increased with the increasing content of dianhydride 6 . Polyimide 7g , which was prepared from 100% 6 and ODA, showed water adsorption of less than 0.7% and contact angle against water of 101.1°. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci., 2013     

Synergistic extraction of rare earths(III) from chloride medium with mixtures of 1‐phenyl‐3‐methyl‐4‐benzoyl‐pyrazalone‐5 and di‐(2‐ethylhexyl)‐2‐ethylhexylphosphonate

The synergistic effect of 1‐phenyl‐3‐methyl‐4‐benzoyl‐pyrazalone‐5 (HPMBP, HA) and di‐(2‐ethylhexyl)‐2‐ethylhexylphosphonate (DEHEHP, B) in the extraction of rare earths (RE) from chloride solutions has been investigated. Under the experimental conditions used, there was no detectable extraction when DEHEHP was used as a single extractant while the amount of RE(III) extracted by HPMBP alone was also low. But mixtures of the two extractants at a certain ratio had very high extractability for all the RE(III). For example, the synergistic enhancement coefficient was calculated to be 9.35 for Y³⁺, and taking Yb³⁺ and Y³⁺ as examples, RE³⁺ is extracted as RE(OH)A₂.B. The stoichiometry, extraction constants and thermodynamic functions such as Gibbs free energy change ΔG (?17.06 kJ mol^?1), enthalpy change ΔH (?35.08 kJ mol^?1) and entropy change ΔS (?60.47 J K^?1 mol^?1) for Y³⁺ at 298 K were determined. The separation factors (SF) for adjacent pairs of rare earths were calculated. Studies show that the binary extraction system not only enhances the extraction efficiency of RE(III) but also improves the selectivity, especially between La(III) and the other rare earth elements. Copyright © 2006 Society of Chemical Industry     

Evaluation and fabrication of pore‐size‐tuned silica membranes with tetraethoxydimethyl disiloxane for gas separation

Organic/inorganic hybrid silica membranes were prepared from 1,1,3,3‐tetraethoxy‐1,3‐dimethyl disiloxane (TEDMDS) by the sol‐gel technique with firing at 300–550°C in N₂. TEDMDS‐derived silica membranes showed high H₂ permeance (0.3–1.1 × 10^?6 mol m^?2 s^?1 Pa^?1) with low H₂/N₂ (～10) and high H₂/SF₆ (～1200) perm‐selectivity, confirming successful tuning of micropore sizes larger than TEOS‐derived silica membranes. TEDMDS‐derived silica membranes prepared at 550°C in N₂ increased gas permeances as well as pore sizes after air exposure at 450°C. TEDMDS had an advantage in tuning pore size by the “template” and “spacer” techniques, due to the pyrolysis of methyl groups in air and Si? O? Si bonding, respectively. For pore size evaluation of microporous membranes, normalized Knudsen‐based permeance, which was proposed based on the gas translation model and verified with permeance of zeolite membranes, reveals that pore sizes of TEDMDS membranes were successfully tuned in the range of 0.6–1.0 nm. © 2011 American Institute of Chemical Engineers AIChE J, 2011     

Cure kinetics and catalyzed effect of hydroxyl group of LC diglycidyl ether of bisphenol‐S with aromatic diamines

The curing reactions of liquid crystalline 4,4′‐bis‐(2,3‐epoxypropyloxy)‐sulfonyl‐bis(1,4‐phenylene) (p‐BEPSBP) with 4,4′‐diaminodiphenylmethane (DDM) and 4,4′‐diaminodiphenylsulfone (DDS) were investigated by nonisothermal differential scanning calorimeter (DSC). The relationships of E_a with the conversion α in the curing process were determined. The catalyzed activation of hydroxyl group for curing reaction of epoxy resins with amine in DSC experiment was discussed. The results show that these curing reactions can be described by the autocatalytic ?esták‐Berggren model. The curing technical temperature and parameters were obtained, and the even reaction orders m, n, and ΔS for p‐BEPSBP/DDM and p‐BEPSBP/DDS are 0.35, 0.92, ?81.94 and 0.13, 1.32, ?24.45, respectively. The hydroxyl group has catalyzed activation for the epoxy–amine curing system in the DSC experiment. The average E_a of p‐BEPSBP/DDM is 67.19 kJ mol^?1 and is 105.55 kJ mol^?1 for the p‐BEPSBP/DDS system, but it is different for the two systems; when benzalcohol as hydroxyl group was added to the curing system, the average E_a of p‐BEPSBP/DDM decreases and increases for p‐BEPSBP/DDS. The crystalline phase had formed in the curing process and was fixed in the system. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

RAFT polymerization of N‐vinyl pyrrolidone using prop‐2‐ynyl morpholine‐4‐carbodithioate as a new chain transfer agent

RAFT polymerization of N‐vinyl pyrrolidone (NVP) has been investigated in the presence of chain transfer agent (CTA), i.e., prop‐2‐ynyl morpholine‐4‐carbodithioate (PMDC). The influence of reaction parameters such as monomer concentration [NVP], molar ratio of [CTA]/[AIBN, i.e., 2,2′‐azobis (2‐methylpropionitrile)] and [NVP]/[CTA], and temperature have been studied with regard to time and conversion limit. This study evidences the parameters leading to an excellent control of molecular weight and molar mass dispersity. NVP has been polymerized by maintaining molar ratio [NVP]: [PMDC]: [AIBN] = 100 : 1 : 0.2. Kinetics of the reaction was strongly influenced by both temperature and [CTA]/[AIBN] ratio and to a lesser extent by monomer concentration. The activation energy (E_a = 31.02 kJ mol^?1) and enthalpy of activation (ΔH^?= 28.29 kJ mol^?1) was in a good agreement to each other. The negative entropy of activation (ΔS^? = ?210.16 J mol^‐1K^‐1) shows that the movement of reactants are highly restricted at transition state during polymerization. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synergistic extraction and separation study of rare earth elements from nitrate medium by mixtures of sec‐nonylphenoxy acetic acid and 2,2′‐bipyridyl

BACKGROUND: Synergistic extraction has been proven to enhance extractability and selectivity. Numerous types of synergistic extraction systems have been applied to rare earth elements, among which sec‐nonylphenoxyacetic acid (CA100) has proved to be an excellent synergistic extractant. In this study, the synergistic enhancement of the extraction of holmium(III) from nitrate medium by mixtures of CA100 (H₂A₂) with 2,2′‐bipyridyl (bipy, B) in n‐heptane has been investigated. The extraction of all other lanthanides (except polonium) and yttrium by the mixtures in n‐heptane has also been studied. RESULTS: Mixtures of CA100 and bipy have significant synergistic effects on all rare earth elements, for example holmium(III) is extracted as Ho(NO₃)₂HA₂B with the mixture instead of HoH₂A₅, which is extracted by CA100 alone. The thermodynamic functions, ΔH^o, ΔG^o, and ΔS^o have been calculated as 2.96 kJ mol^?1, ? 6.23 kJ mol^?1, and 31.34 J mol^?1 K^?1, respectively. CONCLUSION: Methods of slope analysis and constant molar ratio have been successfully applied to study the synergistic extraction stoichiometries of holmium(III) by mixtures of CA100 and bipy. Mixtures of these extractants have also shown various synergistic effects with other rare earth elements, making it possible to separate them. Thus CA100 + bipy may be used to separate yttrium from other lanthanides at appropriate ratios of the extractants. Copyright © 2011 Society of Chemical Industry     

Highly Active and Enantioselective Rhodium‐Catalyzed Asymmetric 1,4‐Addition of Arylboronic Acid to α,β‐ Unsaturated Ketone by using Electron‐Poor MeO‐F12‐BIPHEP

The asymmetric 1,4‐addition of phenylboronic acid to cyclohexenone were performed by using a low amount of rhodium/(R)‐(6,6′‐dimethoxybiphenyl‐2,2′‐diyl)bis[bis(3,4,5‐trifluorophenyl)phosphine] (MeO‐F₁₂‐BIPHEP) catalyst. Because the catalyst shows thermal resistance at 100 °C, up to 0.00025 mol% Rh catalyst showed good catalytic activity. The highest turnover frequency (TOF) and turnover number (TON) observed were 53,000 h⁻¹ and 320,000, respectively. The enantioselectivities of the products were maintained at a high level of 98% ee in these reactions. The Eyring plots gave the following kinetic parameters (ΔΔH^≠=−4.0±0.1 kcal mol⁻¹ and ΔΔS^≠=−1.3±0.3 cal mol⁻¹ K⁻¹), indicating that the entropy contribution is relatively small. Both the result and consideration of the transition state in the insertion step at the B3LYP/6‐31G(d) [LANL2DZ for rhodium] levels indicated that the less σ‐donating electron‐poor (R)‐MeO‐F₁₂‐BIPHEP could be creating a rigid chiral environment around the rhodium catalyst even at high temperature.     

Thiol‐Michael coupling and ring‐opening metathesis polymerization: facile access to functional exo‐7‐oxanorbornene dendron macromonomers

This paper describes the synthesis of the 2‐ and 4‐functional acrylic exo‐7‐oxanorbornene species 2‐((2‐((3aR,7aS)‐1,3‐dioxo‐1,3,3a,4,7,7a‐hexahydro‐2H‐4,7‐epoxyisoindol‐2‐yl)ethoxy) carbonyl)‐2‐methylpropane‐1,3‐diyl diacrylate and (((2‐((2‐((3aR,7aS)‐1,3‐dioxo‐1,3,3a,4,7,7a‐hexahydro‐2H‐4,7‐epoxyisoindol‐2‐yl)ethoxy) carbonyl)‐2‐methylpropane‐1,3‐diyl)bis(oxy))bis(carbonyl))bis(2‐methylpropane‐2,1,3‐triyl) tetraacrylate, and their use as common precursors for the preparation of a small library of dendronized thioether adducts via nucleophile‐mediated thiol‐Michael coupling chemistry. We subsequently demonstrate that the dendronized monomers can be (co)polymerized via ring‐opening metathesis polymerization employing Grubbs'‐type Ru‐based initiators to give novel functional dendronized (co)polymers of predictable molecular weights and acceptable dispersities (?_M = _w/ _n). © 2013 Society of Chemical Industry     

Synthesis and characterization of alternate copolymers constructed by 1,3‐bis(diphenylsilyl)‐2,2,4,4‐tetraphenylcyclodisilazane units with oligo‐dimethylsiloxane segments

1,3‐Dichloro‐1,1,3,3‐tetraphenyldisilazane (DCTPS) with 71.6% yield was synthesized by the reaction of hexaphenylcyclotrisilazane (HPCT) with Ph₂SiCl₂ catalyzed by dibutyltin dilaurate. A ring‐closure reaction of DCTPS was carried out with BuLi in xylene–hexane mixture solvent; 1,3‐bis(chlorodiphenylsilyl)‐2,2,4,4‐tetraphenyl‐cyclodisilazane (BcPTPC) with 73.2% yield was obtained. Hydrolysis of BcPTPC in ether–triethylamine solvent resulted in 71.9% yield of 1,3‐bis(diphenylhydroxysilyl)‐2,2,4,4‐tetraphenylcyclodisilazane (B_HPTPC). By condensation polymerization of B_HPTPC with α,ω‐bis(diethylamino)‐oligo‐dimethylsiloxane, a kind of alternate copolymer constructed by 1,3‐bis(diphenylsilyl)‐2,2,4,4‐tetraphenylcyclodisilazane units with oligo‐dimethylsiloxane segments [P(BPTPC‐alt‐ODMS)] was synthesized. BcPTPC, B_HPTPC as well as P(BPTPC‐alt‐ODMS) were characterized by ²⁹Si‐NMR spectra, FT‐IR spectra, and elemental analysis. DGA study shows that P(BPTPC‐alt‐ODMS)s are thermally stable. The thermal decomposition onsets of P(BPTPC‐alt‐ODMS)s are all above 520°C. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1484–1490, 2005     

Syntheses and characterization of polystyrene‐supported 2,5‐dimercapto‐1,3,4‐thiodiazole and its sorption behavior for Pd(II), Pt(IV), and Au(III)

A type of chelating resin crosslinking polystyrene‐supported 2,5‐dimercapto‐1,3,4‐thiodiazole (also called bismuththiol I, BMT), containing sulfur and nitrogen atoms, was prepared. The structure of PS‐BMT was confirmed by FTIR, elemental analysis, and X‐ray photoelectron spectroscopy (XPS). Adsorption of Pd(II), Pt(IV), and Au(III) was investigated. The capacity of PS‐BMT to adsorb Pd(II) and Pt(IV) was 0.190 and 0.033 mmol/g, respectively. The adsorption dynamics of Pd(II) showed that adsorption was controlled by liquid film diffusion and that the apparent activation energy, E_a, was 32.67 kJ/mol. The Langmuir model was better than the Freundlich model in describing the isothermal process of Pd(II), and the ΔG, ΔH, and ΔS values calculated were ?0.33 kJ/mol, 26.29 kJ/mol, and 87.95 J mol^?1 K^?1, respectively. The mechanisms of adsorption of Pd(II), Pt(IV), and Au(III) were confirmed by XPS. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 631–637, 2006     

Synthesis,physical properties,and crystallization of optically active poly(L‐phenyllactic acid) and poly(L‐phenyllactic acid‐co‐L‐lactic acid)

Optically active poly(L ‐phenyllactic acid) (Ph‐PLLA), poly(L ‐lactic acid) (PLLA), and poly(L ‐phenyllactic acid‐co‐L ‐lactic acid) with weight‐average molecular weight exceeding 6 × 10³ g mol^?1 were successfully synthesized by acid catalyzed direct polycondensation of L ‐phenyllactic acid and/or L ‐lactic acid in the presence of 2.5–10 wt % of p‐toluenesulfonic acid. Their physical properties and crystallization behavior were investigated by differential scanning calorimetry, thermogravimetry, and polarimetry. The absolute value of specific optical rotation ([α]) for Ph‐PLLA (?38 deg dm^?1 g^?1 cm³) was much lower than that of [α] for PLLA (?150 deg dm^?1 g^?1 cm³), suggesting that the helical nature was reduced by incorporation of bulky phenyl group. PLLA was crystallizable during solvent evaporation, heating from room temperature, and cooling from the melt. Incorporation of a very low content of bulky phenyllactyl units even at 4 mol % suppressed the crystallization of L ‐lactyl unit sequences during heating and cooling, though the copolymers were crystallizable for L ‐phenylactyl units up to 6 mol % during solvent evaporation. The activation energy of thermal degradation (ΔE_td) for Ph‐PLLA (200 kJ mol^?1) was higher than that for PLLA (158 kJ mol^?1). The ΔE_td for the copolymers increased with an increase in L ‐phenyllactyl unit content. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Solvent extraction studies of Sm(III) from nitrate medium and separation factors of rare earth elements with mixtures of sec‐octylphenoxyacetic acid and 1,10‐phenthroline

BACKGROUND: Liquid–liquid extraction is widely used for the separation of rare earths, among which synergistic extraction has attracted more and more attention. Numerous types of synergistic extraction systems have been applied to rare earths with high extraction efficiency and selectivities. In the present study, mixtures of sec‐octylphenoxyacetic acid (CA12, H₂A₂) and 1,10‐phenanthroline (phen, B) have been used for the extraction of rare earths from nitrate medium. The stoichiometry of samarium(III) extraction has been studied using the methods of slope analysis and constant molar ratio. The possibility of using synergistic extraction effects to separate rare earths has also been studied. RESULTS: Mixtures of CA12 and phen display synergistic effects in the extraction of rare earth elements giving maximum enhancement coefficients of 5.5 (La); 13.7 (Nd); 15.9 (Sm); 24.5 (Tb); 45.4 (Yb) and 12.3 (Y). Samarium(III) is extracted as SmHA₄B₃ with mixtures of CA12 and phen instead of SmHA₄ when extracted with CA12 alone. The calculated logarithm of the equilibrium constant is 6.0 and the thermodynamic functions, ΔH, ΔG, and ΔS, have been calculated as 4.3 kJ mol^?1, ? 33.7 kJ mol^?1 and 129.7 J mol^?1 K^?1, respectively. CONCLUSION: Mixtures of CA12 and phen exhibit synergistic effects on rare earth elements. Graphical and numerical methods have been successfully used to determine their stoichiometries. The different synergistic effects may provide the possibility of separating yttrium from heavy lanthanoids at an appropriate ratio of CA12 and phen. Copyright © 2010 Society of Chemical Industry     

Synthesis and properties of polyamides based on 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐hexahydro‐4,7‐methanoindan

A new diamine 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐hexahydro‐4,7‐methanoindan ( 3 ) was prepared through the nucleophilic displacement of 5,5′‐bis(4‐hydroxylphenyl)‐hexahydro‐4,7‐methanoindan ( 1 ) with p‐halonitrobenzene in the presence of K₂CO₃ in N,N‐dimethylformamide (DMF), followed by catalytic reduction with hydrazine and Pd/C in ethanol. A series of new polyamides were synthesized by the direct polycondensation of diamine 3 with various aromatic dicarboxylic acids. The polymers were obtained in quantitative yields with inherent viscosities of 0.76–1.02 dl g⁻¹. All the polymers were soluble in aprotic dipolar solvents such as N,N‐dimethylacetamide (DMAc) and N‐methyl‐2‐pyrrolidone (NMP), and could be solution cast into transparent, flexible and tough films. The glass transition temperatures of the polyamides were in the range 245–282 °C; their 10% weight loss temperatures were above 468 °C in nitrogen and above 465 °C in air. © 2000 Society of Chemical Industry     

Polystyrene composites of single‐walled carbon nanotubes‐graft‐polystyrene

Single‐walled carbon nanotubes (SWCNTs) dispersed in N‐methylpyrrolidone (NMP) were functionalized by addition of polystyryl radicals from 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐ended polystyrene (SWCNT‐g‐PS). The amount of polystyrene grafted to the nanotubes was in the range 20‐25 wt% irrespective of polystyrene number‐average molecular weight ranging from 2270 to 49 500 g mol^?1. In Raman spectra the ratios of D‐band to G‐band intensity were similar for all of the polystyrene‐grafted samples and for the starting SWCNTs. Numerous near‐infrared electronic transitions of the SWCNTs were retained after polymer grafting. Transmission electron microscopy images showed bundles of SWCNT‐g‐PS of various diameters with some of the polystyrene clumped on the bundle surfaces. Composites of SWCNT‐g‐PS in a commercial‐grade polystyrene were prepared by precipitation of mixtures of the components from NMP into water, i.e. the coagulation method of preparation. Electrical conductivities of the composites were about 10^?15 S cm^?1 and showed no percolation threshold with increasing SWCNT content. The glass transition temperature (T_g) of the composites increased at low filler loadings and remained constant with further nanotube addition irrespective of the length and number of grafted polystyrene chains. The change of heat capacity (ΔC_p) at T_g decreased with increasing amount of SWCNT‐g‐PS of 2850 g mol^?1, but ΔC_p changed very little with the amount of SWCNT‐g‐PS of higher molecular weight. The expected monotonic decrease in ΔC_p coupled with the plateau behavior of T_g suggests there is a limit to the amount that T_g of the matrix polymer can increase with increasing amount of nanotube filler. Copyright © 2012 Society of Chemical Industry     

The preparation,characterization, and cure reactions of new bisbenzocyclobutene‐terminated aromatic imides

Several new bisbenzocyclobutene‐terminated aromatic imides, 2,2′‐bis(N‐4‐benzocyclobutenyl) phthalimide, 2,2′‐bis[4‐(N‐4‐benzocyclobutenylphthalimide)]‐ether, 2,2′‐bis[4‐(N‐4‐benzocyclobutenylphthalimide)]‐ketone, and 2,2′‐bis[4‐(N‐4‐benzo cyclobutenylphthalimid‐4‐oxy) phenyl]‐propane, have been synthesized in high yields and characterized by FTIR, MS, EA, and ¹H NMR spectroscopy. The polymers cured from benzocyclobutene‐terminated imides have high glass transition temperature and good thermal stabilities. The cure reaction of an imide was studied by FTIR‐ATR (attenuated total reflection) and DSC techniques. Apparent kinetic parameters of the cure reaction are obtained. The apparent cure reaction order, activation energy, and pre‐exponential factor determined by isothermal DSC method are 1, 143.4 kJ/mol, and 3.88× 10¹³ min^?1, and by nonisothermal DSC methods 1, 139.4 kJ/mol, and 2.27× 10¹³ min^?1, respectively. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1705–1719, 2006