共查询到18条相似文献,搜索用时 328 毫秒
1.
主要综述了计算机辅助技术在熔融沉积3D打印中的应用,其中包括在对喷头温度场的分析、对制件温度场、应力场和压力场的分析以及预测不同工艺参数对制件精度的影响。其中涉及的高分子材料包括丙烯腈–丁二烯–苯乙烯塑料、聚醚醚酮材料和聚乳酸材料;涉及的工艺参数主要为喷头温度、成型室温度、打印速率、扫描方式和分层厚度;采用的模型制件通常为板状制件,也包括结构较为复杂的人工骨制件。 相似文献
2.
3.
4.
综述了通用塑料、工程塑料、生物塑料和光敏树脂等3D打印用材料的研究进展,分析了3D打印高分子材料面临的发展问题,提出了相应的对策。 相似文献
5.
6.
7.
8.
简单介绍了不同3D打印技术的原理,并对不同打印技术所用的高分子材料进行了介绍。其中,聚乳酸和聚己内酯的加工性能、生物相容性和可降解性能较好,通过共混改性可以提高其力学性能,可应用于熔融沉积打印;聚碳酸酯和丙烯腈–丁二烯–苯乙烯塑料的力学性能和加工性能良好,均能用于熔融沉积打印;聚醚醚酮的加工性能较差,但力学性能和尺寸稳定性较好,可应用选择性激光烧结打印技术,也可以应用高温下的熔融沉积技术;光敏树脂利用光引发剂引发固化,通过改性可提高其力学性能,从而应用于立体光固化技术;高分子粉末烧结温度低,力学性能和尺寸稳定性好,多用于选择性激光烧结技术。 相似文献
9.
综述了近年来木质素生物质在3D打印材料方面应用的研究进展。木质素作为由多种苯基丙烷单元通过不同的键链接构成的高分子聚合物,丰富的羟基、羰基和醚基等使其可以作为可再生生物基材料应用于3D打印领域。包括可降解塑料复合医学材料、木质素基水凝胶、木质素基3D打印热塑性材料等。重点介绍了不同提取方法得到的木质素的结构特征及与各种材料复合应用于各种3D打印技术方法,详细分析了木质素在3D打印材料应用中的优缺点,并为解决其局限性提出漆酶等对木质素结构进行修饰的思路。最后,对木质素在3D打印领域的应用前景提出了展望。 相似文献
10.
11.
12.
混凝土3D打印是现代数字化制造的典型代表,因其智能化、个性化、绿色建造的工艺优势受到广泛关注。作为一种新型建造方式,3D打印为建筑业带来了颠覆性的影响,并对传统混凝土材料提出了全新的挑战。如何提升混凝土材料与3D打印技术的适应性,实现3D打印技术在建筑中的广泛应用是人们普遍关注的焦点。本文概述了混凝土3D打印技术的发展历程,系统论述了混凝土3D打印材料在流变性、可挤出性、可建造性以及力学性能方面的研究现状,同时,介绍了3D打印模板技术在装饰及异型构筑物上的典型应用,以期为混凝土3D打印的研究与未来工程发展提供一定的参考与借鉴。 相似文献
13.
Gregory Ellson Xavier Carrier Jamie Walton Samsuddin Faisal Mahmood Kejia Yang Joshua Salazar Walter E. Voit 《应用聚合物科学杂志》2018,135(6)
Fused filament fabrication (FFF) is the most common form of additive manufacturing. Most FFF materials are variants of commercially available engineering plastics. Their performance when printed can widely vary, thus there is an increasing volume of research on alternative materials with thermal and mechanical performance optimized for FFF. In this work, thiol–isocyanate polymerization is used for the development of a one‐pot synthesis for polythiourethane thermoplastics for tough three‐dimensional (3D) printing applications. The thiol–isocyanate reaction mechanism allows for rapid polymer synthesis with minimal byproduct formation and few limitations on reaction conditions. The resulting elastomer has high toughness and a low melting point, making it favorable for use as a 3D printing filament. The elastomer outperforms commercial filaments in tension when printed. Considering the rapid advancement of additive manufacturing and the limitations of many engineering polymers with the 3D printing process, these results are encouraging for the development of bespoke 3D printing thermoplastics. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45574. 相似文献
14.
介绍了三维(3D)打印技术、熔融沉积成型(FDM)与3D打印用丙烯腈丁二烯苯乙烯共聚物(ABS)存在的问题,讨论了3D打印用ABS材料的成分配方、制备工艺、打印工艺、性能与用途,并指出加大对ABS材料的研究力度,使其能够应用于3D打印的同时,不断提升其打印制品的力学性能,赋予其多种特殊性能,以扩宽3D打印ABS材料的应用范围,是重要的研究方向之一。 相似文献
15.
3D打印技术作为一种快速成型技术,其采用数字式模型文件作为基础,采取逐层打印的办法将可粘合性的塑料或者粉末金属用以构筑所预想的实体技术.由于3D打印技术可采用的耗材种类不同,故其存在着不同的3D打印技术用于构造不同类型的部件.3D打印耗材常有尼龙玻纤、铝合金、钛合金、石膏、镀金银以及橡胶等材料.为了拓宽3D打印机所使用... 相似文献
16.
《Journal of the European Ceramic Society》2022,42(8):3351-3373
Three-dimensional (3D) printing of ceramics has gained widespread attentions in recent years. Many excellent reviews have reported the printing of ceramics. However, most of them focus on printing of dense ceramics or general ceramic aspects, there is no systematical review about 3D printing of porous ceramics. In this review paper, the 3D printing technologies for fabricating of porous ceramic parts are introduced, including binder jetting, selective laser sintering, direct ink writing, stereolithography, laminated object manufacturing, and indirect 3D printing processes. The techniques to fabricate hierarchical porous ceramics by integrating 3D printing with one or more conventional porous ceramics fabrication approaches are reviewed. The main properties of porous ceramics such as pore size, porosity, and compressive strength are discussed. The emerging applications of 3D printed porous ceramics are presented with a focus on the booming application in bone tissue engineering. Finally, summary and a perspective on the future research directions for 3D printed porous ceramics are provided. 相似文献
17.