Effect of irradiation on the luminescence properties of low-dimensional SiGe/Si(001) heterostructures

This study is concerned with the effect of irradiation on the luminescence properties of low-dimensional Si/Ge heterostructures with different degrees of spatial localization of charge carriers. It is shown that the radiation stability of Si/Ge heterostructures is improved with increasing efficiency of localization of charge carriers in the structures. The spatial localization of charge carriers in the SiGe nanostructures decreases the probability of nonradiative recombination of charge carriers at radiation defects produced in the Si matrix. It is demonstrated that, among the structures explored in the study, the highest radiation stability of luminescence properties is inherent in the multilayered structures containing self-assembled Ge(Si) nanoislands, in which the most efficient spatial localization of charge carriers is attained. In this case, the localization is three- and two-dimensional, correspondingly, for holes in the islands and for electrons in the Si layers that separate neighboring layers containing the islands.     

Electroluminescence from MIS silicon-based light emitters with arrays of self-assembled Ge(Si) nanoislands

We report on the electroluminescence from silicon-based metal–insulator–semiconductor (MIS) diodes with arrays of self-assembled Ge(Si) nanoislands. Aluminum oxide (Al₂O₃) is used as an insulator material in the MIS contact. Variations in the electroluminescence spectra caused by changing the metal work function are examined. The intense electroluminescence from Ge(Si) nanoislands localized at a distance of 50 nm from the insulator–semiconductor interface is observed at room temperature. The emission spectrum is found to be controlled by choosing the design of the semiconductor structure and the barrier height for injected carriers.     

Effect of silicon spacer thickness on the electroluminescence of multilayer structures with self-assembled Ge(Si)/Si(001) islands

The results of investigation of the electroluminescence of multilayer p-i-n structures with Ge(Si)/Si(001) self-assembled islands are presented. The nonmonotonic dependence of the room-temperature intensity of the electroluminescence signal from islands on the Si spacer thickness is revealed. The highest electroluminescence signal intensity is observed for structures with a Si spacer thickness of 15?C20 nm. The significant decrease detected in the electroluminescence signal from the islands in structures with thick Si spacers (>20 nm) is explained by the formation of defect regions in them. The observed decrease in the electroluminescence signal in structures with thin Si layers is associated with a decrease in the Ge fraction in the islands in these structures, which is caused by enhanced Si diffusion into islands with increasing elastic strains in the structure.     

Photoluminescence line width of self-assembled Ge(Si) islands arranged between strained Si layers

The effect of variations in the strained Si layer thicknesses, measurement temperature, and optical excitation power on the width of the photoluminescence line produced by self-assembled Ge(Si) nanoislands, which are grown on relaxed SiGe/Si(001) buffer layers and arranged between strained Si layers, is studied. It is shown that the width of the photoluminescence line related to the Ge(Si) islands can be decreased or increased by varying the thickness of strained Si layers lying above and under the islands. A decrease in the width of the photoluminescence line of the Ge(Si) islands to widths comparable with the width of the photoluminescence line of quantum dot (QD) structures based on direct-gap InAs/GaAs semiconductors is attained with consideration of diffusive smearing of the strained Si layer lying above the islands.     

Growth of Si and Ge nanostructures on Si substrates using ultrathin SiO/sub 2/ technology

Using scanning reflection electron microscopy and a high-temperature scanning tunneling microscopy (STM), we study the growth processes of Si and Ge nanostructures on Si substrates covered with ultrathin SiO/sub 2/ films. Si windows are formed in the ultrathin SiO/sub 2/ films by irradiating focused electron beams used for SREM or field emission electron beams from STM tips before or during heating samples. Ge nanoislands are grown only at the Si window positions by depositing Ge on the samples and by subsequent annealing of them. Moreover, Ge nanoislands about 7 nm in size and ultrahigh density (>10/sup 12//cm/sup 2/) are grown on the ultrathin SiO/sub 2/ films. These nanoislands can be manipulated by STM when they are separated from Si substrates by the ultrathin SiO/sub 2/ films. Si, Ge, Ge/Si and Si/Ge/Si nanoislands can also be grown on the Si windows by selective growth using Si/sub 2/H/sub 6/ and GeH/sub 4/ gases. These nanoislands are found to be stable on the Si windows during high-temperature annealing. These results indicate that ultrathin SiO/sub 2/ technology is useful for growing Si and Ge nanostructures on given areas.     

Comparative analysis of photoluminescence and electroluminescence of multilayer structures with self-assembled Ge(Si)/Si(001) island

Comparative studies of the photoluminescence and electroluminescence of multilayer structures with self-assembled Ge(Si)/Si(001) islands are carried out. The luminescence signal from the islands is observable up to room temperature. Annealing of the structures induces a shift of the luminescence peak to shorter wavelengths. The shift is temperature dependent, making possible controllable variations in the spectral position of the luminescence peak of the Ge(Si) islands in the range from 1.3 to 1.55 μm. The enhancement of the temperature quenching of photoluminescence of the islands with increasing annealing temperature is attributed to the decrease in the Ge content in the islands during annealing and, as a result, to a decrease in the depth of the potential well for holes in the islands. The well-pronounced suppression of the temperature quenching of electroluminescence of the Ge(Si) islands in the unannealed structure with increasing pumping current is demonstrated.     

Ballistic Hole Emission Spectroscopy of Self-Assembled GeSi/Si(001) Nanoislands

Ballistic hole emission microscopy/spectroscopy has been applied to study the electronic structure of the hole states in the self-assembled GeSi/Si(001) nanoislands. The ballistic hole emission microscopic images demonstrated the spots of increased collector current related to the ballistic electron tunnelling via the confined valence band states in the GeSi/Si(001) nanoislands. In the ballistic hole emission spectra of the Ge hut clusters the stepwise features attributed to the quantum confined hole states have been observed. The results of present study demonstrate the capabilities of the ballistic hole emission microscopy/spectroscopy in the characterization of the electronic structures of the valence band states in the GeSi/Si nanostructures.     

Enhancement of the Luminescence Signal from Self-Assembled Ge(Si) Nanoislands due to Interaction with the Modes of Two-Dimensional Photonic Crystals

Semiconductors - The results of studies of the luminescence properties of two-dimensional photonic crystals formed on the basis of silicon structures with self-assembled Ge(Si) nanoislands are...     

Luminescence of Spatially Ordered Self-Assembled Solitary Ge(Si) Nanoislands and their Groups Incorporated into Photonic Crystals

Semiconductors - The luminescence properties of arrays of spatially ordered self-assembled solitary Ge(Si) nanoislands and their groups, including those embedded in two-dimensional photonic...     

Effect of parameters of Ge(Si)/Si(001) self-assembled islands on their electroluminescence at room temperature

The electroluminescence (EL) of multilayered p-i-n structures with the self-assembled Ge(Si)/Si(001) islands are investigated. It is found that the structures with islands grown at 600°C have the highest intensity of the electroluminescence signal at room temperature in the wavelength range of 1.3–1.55 μm. The annealing of structures with the Ge(Si) islands leads to an increase in the EL-signal intensity at low temperatures and hampers the temperature stability of this signal, which is related to the additional Si diffusion into islands during annealing. The found considerable increase in the electroluminescence-signal intensity with the thickness of the separating Si layer is associated with a decrease in the elastic stresses in the structure with an increase in this layer’s thickness. The highest EL quantum efficiency in the wavelength range of 1.3–1.55 μm obtained in investigated structures amounted to 0.01% at room temperature.     

Investigation of spatial distribution of photocurrent in the plane of a Si p–n photodiode with GeSi nanoislands by scanning near-field optical microscopy

The spatial distribution of photocurrent in the plane of a Si-based p ⁺–n junction with embedded self-assembled Ge _x Si_1–x (x ≈ 0.35) nanoislands is studied by scanning near-field optical microscopy with local photoexcitation by a microscope probe at an emission wavelength of 1310 nm (larger than the intrinsicphotosensitivity red edge for Si). Inhomogeneities related to interband optical absorption in separate GeSi nanoislands are observed in the photocurrent images (maps of the spatial distribution of the photocurrent in the input-window plane of the p ⁺–n photodiodes). The results of this study demonstrate the possibility of visualizing individual GeSi nanoislands in images of the photocurrent with a spatial resolution of ~100 nm.

     

Selective etching of Si,SiGe, Ge and its usage for increasing the efficiency of silicon solar cells

Dependences of the etch rates for KOH and HF:H₂O₂:CH₃COOH solutions on SiGe layer composition were investigated. The obtained results has been proposed to use for formation of the submicron relief on the silicon surface via selective etching of the structures with Ge(Si) self-assembled nanoislands. In the framework of the proposed approach the Ge(Si) nanoislands serve as a mask for selective etching of Si in a mixture of an aqueous solution of KOH with isopropyl alcohol, followed by the islands removal from the surface by the selective etching in HF:H₂O₂:CH₃COOH. It was demonstrated experimentally that such approach allows to produce the submicron relief on a silicon surface, which leads to the significant decrease of the reflectivity in a wide spectral range. It is believed that the proposed method of surface relief formation can be used to improve the efficiency of the thin-film solar cells based on the crystalline silicon.     

Investigation of the local density of states in self-assembled GeSi/Si(001) nanoislands by combined scanning tunneling and atomic-force microscopy

The local density of states in self-assembled GeSi/Si(001) nanoislands is investigated for the first time by combined tunneling and atomic-force scanning microscopy. Current images and tunneling spectra of individual GeSi/Si(001) islands are obtained. These measurements yield the spatial and energy distributions of the local density of states in GeSi islands, respectively. The tunneling spectroscopy data demonstrate that uncapped Ge_0.3Si_0.7/Si(001) islands behave as type-I heterostructures.     

Controllable growth of GeSi nanostructures by molecular beam epitaxy

We present an overview on the recent progress achieved on the controllable growth of diverse GeSi alloy nanostructures by molecular beam epitaxy. Prevailing theories for controlled growth of Ge nanostructures on patterned as well as inclined Si surfaces are outlined firstly, followed by reviews on the preferential growth of Ge nanoislands on patterned Si substrates, Ge nanowires and high density nanoislands grown on inclined Si surfaces, and the readily tunable Ge nanostructures on Si nanopillars. Ge nanostructures with controlled geometries, spatial distributions and densities, including two-dimensional ordered nanoislands, three-dimensional ordered quantum dot crystals, ordered nanorings, coupled quantum dot molecules, ordered nanowires and nanopillar alloys, are discussed in detail. A single Ge quantum dot-photonic crystal microcavity coupled optical emission device demonstration fabricated by using the preferentially grown Ge nanoisland technique is also introduced. Finally, we summarize the current technology status with a look at the future development trends and application challenges for controllable growth of Ge nanostructures.     

Observation and nucleation control of Ge nanoislands on Si(111) surfaces using scanning reflection electron microscopy

Using a high-resolution scanning reflection electron microscope with multifunctions, we investigate Ge nucleation processes on clean Si(111) surfaces and form Ge islands on them by controlling step arrangements of Si(111) surfaces and by using focused electron beam (EB)-induced surface reactions. It is found that three-dimensional (3D) Ge islands grow selectively at step band areas on the surfaces without growth of the islands at terrace areas. Three-dimensional Ge nanoislands are formed at given points by stimulating the Ge wetting layer using focused electron beams and scanning tunnelling microscopy. Ge nanoislands are also formed by depositing Ge on Si windows in ultrathin SiO2 films and subsequent annealing of the sample. The islands are formed only at the window positions. These results imply new methods for forming Ge quantum dots or nanostructures at given areas.     

Resonance raman scattering in Ge nanoislands grown on a Si(111) substrate coated with an ultrathin SiO<Subscript>2</Subscript> layer

Germanium nanoislands formed on a Si (111) surface coated with an ultrathin oxide layer were investigated by Raman spectroscopy. For analysis of the experimental data, the spectra of real islands containing some hundreds of Ge atoms were calculated numerically. The effects of the resonance enhancement of the intensity of Raman scattering in the Ge-nanoisland-SiO₂-Si system and the influence of the lateral sizes of nanoislands on the frequencies of phonons localized in them are discussed.     

Ge/Si Self-Assembled Quantum Dots and Their Optoelectronic Device Applications

In recent years, quantum dots have been successfully grown by self-assembling processes. For optoelectronic device applications, the quantum-dot structures have advantages such as reduced phonon scattering, longer carrier lifetime, and lower detector noise due to low-dimensional confinement effect. Comparing to traditional optoelectronic III-V and other materials, self-assembled Ge quantum dots grown on Si substrates have a potential to be monolithically integrated with advanced Si-based technology. In this paper, we describe the growth of self-assembled, guided Ge quantum dots, and Ge quantum-dot superlattices on Si. For dot growth, issues such as growth conditions and their effects on the dot morphology are reviewed. Then vertical correlation and dot morphology evolution are addressed in relation to the critical thickness of Ge quantum-dot superlattices. In addition, we also discuss the quantum-dot p-i-p photodetectors (QDIPs) and n-i-n photodetectors for mid-infrared applications, and the quantum-dot p-i-n photodetectors for 1.3-1.55 mum for communications applications. The wavelength of SiGe p-i-p QDIP can be tuned by the size as grown by various patterning methods. Photoresponse is demonstrated for an n-i-n structure in both the mid-infrared and far-infrared wavelength ranges. The p-i-n diodes exhibit low dark current and high quantum efficiency. The characteristics of fabricated light-emitting diode (LED) devices are also discussed, and room-temperature electroluminescence is observed for Ge quantum-dot LED. The results indicate that Ge dot materials are potentially applicable for mid-infrared (8-12 mum) detectors as well as fiber-optic (1.3-1.55 mum) communications.     

Effect of tensile-strained Si layer on photoluminescence of Ge(Si) self-assembled islands grown on relaxed SiGe/Si(001) buffer layers

The results of studying the photoluminescence of the structures with Ge(Si) self-assembled islands embedded into tensile-strained Si layer are reported. The structures were grown on smooth relaxed Si_{1 ? x} Ge_x/Si(001) (x = 0.2–0.3) buffer layers. The photoluminescence peak found in the photoluminescence spectra of the studied structures is related to the indirect (in real space) optical transition between the holes localized in the Ge(Si) islands and electrons localized in the tensile-strained Si layers under and above an island. It is shown that one can efficiently control the position of the photoluminescence peak for a specified type of structure by varying the thickness of the strained Si layers. It is found that, at 77 K, the intensity of the photoluminescence signal from the heterostructures with Ge(Si) self-assembled islands contained between the tensile-strained Si layers exceeds by an order of magnitude the intensity of the photoluminescence signal from the GeSi structures with islands formed on the Si(001) substrates.     

Fully coherent Ge islands growth on Si nano-pillars by selective epitaxy

Our recent experimental results of Ge nanoheteroepitaxy (NHE) on Si nanopillars (NPs) are reviewed to confirm the possibility of relaxed Ge growth on Si without misfit dislocations (MDs) formation by elastic deformation. Selective Ge growth is performed by using reduced pressure chemical vapor deposition (CVD) on two types of Si NPs with thermal SiO₂ or CVD SiO₂ sidewalls and on Si nanoislands (NIs) on SiO₂. By using thermal SiO₂ sidewall, compressive strain is generated in the Si pillar and fixed by the thermal SiO₂. This results in an incoherent Ge growth on Si NPs due to MD formation. By using CVD SiO₂ sidewall, tensile strain formation due to thermal expansion during prebake for Ge epi process is observed. However, strain in Si due to Ge growth is not dominant. By introducing a Si_0.5Ge_0.5 buffer layer, no MD and stacking faults are observed by cross section TEM. The shape of Ge on Si NPs becomes more uniform due to improved crystal quality. On Si NIs on SiO₂, a clear compliance effect is observed after Ge growth. Coherent growth of Ge on Si is also realized on Si NIs by using Si_0.5Ge_0.5 buffer.     

Interaction of self-assembled Ge islands and adjacent Si layers grown on unpatterned and patterned Si(001) substrates

For use in electronic devices, self-assembled Ge islands formed on Si(001) must be covered with an additional Si layer. Chemically vapor deposited Si layers initially grow very rapidly over Ge islands because of the catalytic effect of Ge on the reaction of the Si-containing gas. The edges of the Si features covering Ge “pyramids” are rotated by 45° with respect to the edges of the Ge pyramids because of the different mechanisms orienting the Ge islands and the Si features. When multiple layers of islands are formed, the in-plane ordering of the Ge islands depends on the thickness of the Si interlayer separating the island layers. When selective Si is grown on a patterned Si wafer to form the underlying structure for the Ge islands, the position of the islands is influenced by the detailed shape of the Si near the edges, which in turn depends on the thickness of the selectively deposited Si, the pattern size, and the amount of surrounding oxide.