A new approach to functionalize multi-walled carbon nanotubes by the use of functional polymers

A new method to graft a large number of long polymer chains or small functional molecules onto multi-walled carbon nanotubes (MWNTs) indirectly is reported. First, MWNTs were slightly functionalized by reversible addition-fragmentation chain transfer (RAFT) copolymerization of styrene and maleic anhydride using the dithioester groups attached to MWNTs as RAFT agents. The highly reactive maleic anhydride groups could further react with a large number of long polymer chains or small functional molecules with hydroxyl or amino group easily. The resulted MWNTs have good solubility in organic solvents and water; the perfect structure of MWNTs is altered very little from the information of Raman spectra.     

Synthesis and self-assembly behaviors of three-armed amphiphilic block copolymers via RAFT polymerization

The novel trifunctional reversible addition-fragmentation chain transfer (RAFT) agent, tris(1-phenylethyl) 1,3,5-triazine-2,4,6-triyl trithiocarbonate (TTA), was synthesized and used to prepare the three-armed polystyrene (PS₃) via RAFT polymerization of styrene (St) in bulk with thermal initiation. The polymerization kinetic plot was first order and the molecular weights of polymers increased with the monomer conversions with narrow molecular weight distributions (M_w/M_n ≤ 1.23). The number of arms of the star PS was analyzed by gel permeation chromatography (GPC), ultraviolet visible (UV-vis) and fluorescence spectra. Furthermore, poly(styrene-b-N-isopropylacrylamide)₃ (PS-b-PNIPAAM)₃, the three-armed amphiphilic thermosensitive block copolymer, with controlled molecular weight and well-defined structure was also successfully prepared via RAFT chain extension method using the three-armed PS obtained as the macro-RAFT agent and N-isopropylacrylamide as the second monomer. The copolymers obtained were characterized by GPC and ¹H nuclear magnetic resonance (NMR) spectra. The self-assembly behaviors of the three-armed amphiphilic block copolymers (PS-b-PNIPAAM)₃ in mixed solution (DMF/CH₃OH) were also investigated by high performance particle sizer (HPPS) and transmission electron microscopy (TEM). Interestingly, the lower critical solution temperature (LCST) of aqueous solutions of the three-armed amphiphilic block copolymers (PS-b-PNIPAAM)₃ decreased with the increase of relative length of PS in the block copolymers.     

Self-healing linear polymers based on RAFT polymerization

Self-healing polystyrene (PS) composites were fabricated, in which glycidyl methacrylate (GMA)-loaded microcapsules were embedded. Because the matrix PS was synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization, it kept living characteristics and was able to resume the polymerization so long as monomers were available. Upon damage of the composites, the GMA released from the broken capsules infiltrated into the cracks and was copolymerized with the matrix PS according to the above mechanism. As a result, the cracked planes were covalently re-bonded, offering recovery of impact strength. Compared to the self-healing system based on atom transfer radical polymerization (ATRP), which is also an approach of living polymerization, the current one possesses robust vitality in air and eliminates the possibility of acceleration of matrix degradation aroused by metal ions. Additionally, the resultant self-healing PS composites have an advantage in coloration, which is important for satisfying esthetic requirement in practice.     

Reversible addition-fragmentation chain transfer (RAFT) polymerization of styrene in the presence of oxygen

Reversible addition-fragmentation chain transfer polymerization (RAFT) of styrene (St) was carried out in the presence of oxygen using 2-cyanoprop-2-yl 1-dithionaphthalate (CPDN) or benzyl (2-phenyl)-1-imidazolecarbodithioate (BPIC) as the RAFT agent. The characteristics of the “living”/controlled radical polymerization were observed at high concentration of RAFT agent and low polymerization temperature. A slight increase in the rate of polymerization was found when oxygen was added at high concentration to the polymerization system; however, the presence of oxygen incurred greater polydispersities of the polymer at the same monomer conversion compared to that obtained in the absence of oxygen. The possible mechanism of the RAFT polymerization of St in the presence of oxygen was discussed.     

Synthesis and pH-dependent micellization of 2-(diisopropylamino)ethyl methacrylate based amphiphilic diblock copolymers via RAFT polymerization

The polymerization of 2-(diisopropylamino)ethyl methacrylate (DPA) by RAFT mechanism in the presence of 4-cyanopentanoic acid dithiobenzoate in 1,4-dioxane was studied. The DPA homopolymer was employed as a macro chain transfer agent to synthesize pH-sensitive amphiphilic block copolymers using poly(ethylene glycol) methyl ether methacrylate (PEGMA) as the hydrophilic block. ¹H NMR and GPC measurements confirmed the successful synthesis of these copolymers. Potentiometric titrations and fluorescence experiments proved that the copolymers underwent a sharp transition from unimers to micelles at a pH of ∼6.7 in phosphate buffered saline solutions. It was found that the hydrophilic/hydrophobic balance of these block copolymers had no apparent effect on their pH-induced micellization behaviors. The DLS investigation revealed that the micelles have a mean hydrodynamic diameter below 60 nm with a narrow size distribution.     

Thermal polymerization of methyl (meth)acrylate via reversible addition-fragmentation chain transfer (RAFT) process

Thermal polymerization of methyl (meth)acrylate (MMA) was carried out using 2-cyanoprop-2-yl-1-dithionaphthalate (CPDN) and cumyl dithionaphthalenoate (CDN) as chain transfer agents. The kinetic study showed the existence of induction period and rate retardation, especially in the CDN mediated systems. The molecular weights of the polymers increased linearly with the monomer conversion, and the molecular weight distributions (M_w/M_ns) of the polymers were relatively narrow up to high conversions. The maximum number-average molecular weights (M_ns) reached to 351?900 g/mol (M_w/M_n = 1.47) and 442?400 g/mol (M_w/M_n = 1.29) in the systems mediated by CPDN and CDN, respectively. Chain-extension reactions were also successfully carried out to obtain higher molecular weight PMMA and PMMA-block-polystyrene (PMMA-b-PSt) copolymer with controlled structure and narrow M_w/M_n. Thermal polymerization of methyl acrylate (MA) in the presence of CPDN, or benzyl (2-phenyl)-1-imidazolecarbodithioate (BPIC) also demonstrated “living”/controlled features with the experimented maximum molecular weight 312?500 g/mol (M_w/M_n = 1.57). The possible initiation mechanism of the thermal polymerization was discussed.     

Synthesis and characterization of H-shaped copolymers by combination of RAFT polymerization and CROP

A novel trithiocarbonate, S,S′-bis(1-(((5-ethyl-2,2-dimethyl-1,3-dioxane-5-yl)methoxy)carbonyl)propyl) trithiocarbonate (CTA-H), was synthesized in the presence of the anion-exchange resin with OH⁻ form. And then it was used as the chain transfer agent in RAFT polymerizations of styrene (St), the polymers with controllable molecular weights and narrow molecular weight distributions were synthesized. After the terminal acetonide groups was deprotected in the presence of a cation-exchange resin with H⁺ form, the polystyrene (PSt) with two hydroxyl groups in both chain ends was easily afforded. Then it was used as macro initiator in the cation ring open polymerization (CROP) of 1,3-dioxepane (DOP), and the well-defined H-shaped block copolymers, (PDOP)₂PSt(PDOP)₂, were successfully prepared. The H-shaped structure was characterized by its IR, GPC and ¹H NMR spectra, and also those of the hydrolysis products.     

Characterization of pH-dependent micellization of polystyrene-based cationic block copolymers prepared by reversible addition-fragmentation chain transfer (RAFT) radical polymerization

A series of block copolymers composed of a fixed length of an (ar-vinylbenzyl)trimethylammonium chloride (Q) block (the number average degree of polymerization of the Q block, DP_n,Q=57) and varying lengths of an N,N-dimethylvinylbenzylamine (A) block (the number average degrees of polymerization of the A blocks, DP_n,A, ranging 11-50) were prepared by reversible addition-fragmentation chain transfer (RAFT) radical polymerization, and their pH-dependent micellization was characterized by potentiometric titration, ¹H NMR spectroscopy, dynamic and static light scattering, and fluorescence techniques as a function of the A block length. At pH<5.5, the A block is fully protonated, and hence the block copolymers act as a simple polyelectrolyte, dissolving molecularly in acidic water. At pH>7, the A block becomes deprotonated, and thereby the block copolymers aggregate into a micelle composed of hydrophobic microdomains formed from the deprotonated A blocks. Results of light scattering and fluorescence measurements indicated that the micellization behavior depended strongly on the length of the A block. The number of polymer chains comprising one micelle (i.e. mean aggregation number, N_agg) increased from 3 to 12 as DP_n,A increased from 11 to 50 at pH 10.0. In the case of a random copolymer of Q and A with an A/Q molar ratio similar to that of a block copolymer with DP_n,A=50, N_agg∼1 (i.e. unimolecular micelle) was confirmed by static light scattering at pH 10.0.     

One-step synthesis of poly(2-oxazoline)-based amphiphilic block copolymers using a dual initiator for RAFT polymerization and CROP

A range of poly(2-oxazoline) (POx)-based amphiphilic block copolymers were synthesized using 4-cyano-4-(dodecylthiocarbonothioylthio)pentyl-4-methylbenzenesulfonate (CDPS) as a dual initiator for reversible addition-fragmentation chain transfer (RAFT) polymerization and cationic ring-opening polymerization (CROP) in a one-step procedure. Methyl (meth)acrylate, butyl (meth)acrylate, tert-butyl (meth)acrylate, and N-isopropylacrylamide were polymerized for the hydrophobic block, and 2-methyl-2-oxazoline and 2-ethyl-2-oxazoline were used as the hydrophilic block. RAFT polymerization and CROP proceeded independently in a controlled manner and resulted in amphiphilic block copolymers with a narrow molecular weight distribution. CDPS was found to be a useful dual initiator for the one-step synthesis of POx-based amphiphilic block copolymers via a combination of RAFT polymerization and CROP.     

Synthesis and nucleation mechanism of inverse emulsion polymerization of acrylamide by RAFT polymerization: A comparative study

Well-defined poly (acrylamide) is synthesized by RAFT inverse emulsion polymerization using hydrophilic and lipophilic initiators. The kinetic behavior observed for RAFT inverse emulsion polymerization is similar to that for RAFT inverse miniemulsion polymerization. The nucleation mechanism of inverse emulsion polymerization of acrylamide is firstly investigated by RAFT polymerization and verified by GPC and SEM measurements. Droplet nucleation is found to be the primary mechanism in the inverse emulsion polymerization of acrylamide. However, polymerization occurring in the continuous phase is not negligible when lipophilic initiator is used.     

Synthesis and characterization of azobenzene-functionalized poly(styrene)-b-poly(vinyl acetate) via the combination of RAFT and “click” chemistry

Here, we described a strategy for preparing well-defined block copolymers, poly(styrene)-b-poly(vinyl acetate) (PS-b-PVAc), containing middle azobenzene moiety via the combination of the reversible addition-fragmentation chain transfer (RAFT) polymerization and “click” chemistry. Firstly, a novel RAFT agent containing α-alkyne and azobenzene chromophore in R group, 2-(3-ethynylphenylazophenoxycarbonyl)prop-2-yl-9H-carbazole-9-carbodithioate (EACDT), was synthesized and used to mediate the RAFT polymerization of styrene (St). Well-defined α-alkyne end-functionalized poly(styrene) (PS) was obtained. Secondly, the RAFT polymerization of vinyl acetate (VAc) was conducted using functionalized RAFT reagent with ω-azide structure in Z group, O-(2-azidoethyl) S-benzyl dithiocarbonate (AEBDC). Well-defined ω-azide end-functionalized poly(vinyl acetate) (PVAc) was obtained. Afterwards, the resulting α-alkyne terminated PS was coupled by “click” chemistry with the azide terminated PVAc. The block copolymer, PS-b-PVAc, was obtained with tailored structures. The products from each step were characterized and confirmed by GPC, ¹H NMR, IR and differential scanning calorimetry (DSC) examination. Kinetics of the trans-cis-trans isomerization from azobenzene chromophore in PS-b-PVAc and PS were investigated in CHCl₃ solutions.     

RAFT polymerization of hydrophobic acrylamide derivatives

Several hydrophobic acrylamide derivatives: the N-tert-butylacrylamide (TBAm), the N-octadecylacrylamide (ODAm) and the N-diphenylmethylacrylamide (DPMAm) have been polymerized by reversible addition-fragmentation chain transfer (RAFT) process in the presence of azobis(isobutyronitrile) (AIBN) and tert-butyl dithiobenzoate (tBDB) as initiator and reversible chain transfer agent (CTA), respectively. Homopolymerizations were compared as regards to kinetics and molecular weight (MW) control, and the results were discussed according to the monomer structure and to the influence of several experimental parameters, such as the [CTA]/[AIBN] ratio and the [Monomer]/[CTA] ratio. TBAm and ODAm monomers exhibited a well controlled polymerization (polydispersity index (PDI) below 1.3 for number average molecular weight (M_n) until 30,000 g mol⁻¹) over a wide range of conversion (until 70%), whereas DPMAm conversion remained below 20% partly due to steric hindrance. The molecular weights of several poly(TBAm) samples determined by four independent analytical techniques, size exclusion chromatography/on-line light scattering detector (SEC/LSD), ¹H NMR, ¹³C NMR and matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS), were in agreement, close to the theoretical ones. Moreover, the MALDI-TOF MS analyses suggested the presence of parasite chains resulting from irreversible termination onto RAFT intermediate radicals.     

Synthesis of thermoresponsive block and graft copolymers via the combination of living cationic polymerization and RAFT polymerization using a vinyl ether-type RAFT agent

A novel vinyl ether-type RAFT agent, benzyl 2-(vinyloxy)ethyl carbonotrithioate (BVCT) was synthesized for various block copolymers via the combination of living cationic polymerization of vinyl ethers and reversible addition−fragmentation chain transfer (RAFT) polymerization. The novel BVCT–trifluoroacetic acid adduct play an important role to produce well-defined block copolymers, which is both as a cationogen under EtAlCl₂ initiation system in the presence of ethyl acetate for living cationic polymerization and a RAFT agent for blocks by RAFT polymerization. The resulting polymer, poly(vinyl ether)s, by living cationic polymerization had a high number average α-end functionality (≥0.9) as determined by both ¹H NMR and MALDI-TOF-MS spectrometry. In addition, this poly(vinyl ether)s worked well as a macromolecular chain transfer agent for RAFT polymerization. The RAFT polymerization of radically polymerizable monomers was conducted in toluene using 2,2′-azobis(isobutyronitrile) at 70 °C. For example, a double thermoresponsive block copolymer (MOVE₆₁-b-NIPAM₁₅₀) consisting of 2-methoxyethyl vinyl ether (MOVE) and N-isopropylacrylamide (NIPAM) was prepared via the combination of living cationic polymerization and RAFT polymerization. The block copolymer reversibly formed and deformed micellar assemblies above the phase separation temperature (T_ps) of poly(NIPAM) block in water. This BVCT is not only functioned as an initiator, but also acted as a monomer. When BVCT was copolymerized with MOVE by living cationic polymerization, followed by graft copolymerization with NIPAM via RAFT polymerization, well-defined graft copolymers (MOVE_n-co-BVCT_m)-g-NIPAM_x (n = 62–73, m = 1–9, x = 19–214) were successfully obtained. However, no micelle formed in water above T_ps of poly(NIPAM) graft chain unlike the case of block copolymers.     

Synthesis of novel random and block copolymers of tert-butyldimethylsilyl methacrylate and methyl methacrylate by RAFT polymerization

Hydrophobic-hydrolysable copolymers consisting of methyl methacrylate (MMA) and tert-butyldimethylsilyl methacrylate (TBDMSMA) have been synthesized for the first time by Reversible Addition-Fragmentation chain Transfer (RAFT) polymerization technique using cumyl dithiobenzoate (CDB) and cyanoisopropyl dithiobenzoate (CPDB) as chain transfer agents (CTAs). The monomer reactivity ratios for TBDMSMA (r₁ = 1.40 ± 0.03) and MMA (r₂ = 1.08 ± 0.03) have been determined using a non-linear least-squares fitting method. Well-defined random copolymers PMMA-co-PTBDMSMA have been prepared. Then, the versatility of the RAFT process to synthesize silylated block copolymers with controlled molecular weights and low polydispersities has been demonstrated using two strategies: the synthesis of PMMA-SC(S)Ph or PTBDMSMA-SC(S)Ph as macro-chain transfer agent (macro-CTA) for use in a two step method or an one-pot method which consists in the successive addition of the two monomers. Diblock copolymers with narrow molecular weight distributions (PDI < 1.2) were obtained from the one-pot method with number-average molecular weight values within the range 10,000-22,000 g mol⁻¹.     

Preparation of molecularly imprinted polymer microspheres via reversible addition-fragmentation chain transfer precipitation polymerization

The first combined use of reversible addition-fragmentation chain transfer (RAFT) polymerization and precipitation polymerization in the molecular imprinting field is described. The new polymerization technique, namely RAFT precipitation polymerization (RAFTPP), provides MIP microspheres with obvious molecular imprinting effects towards the template, fast template binding process and an appreciable selectivity over structurally related compounds, while only irregular MIP aggregates were obtained via traditional radical precipitation polymerization (TRPP) under similar reaction conditions. The MIP microspheres prepared via RAFTPP have proven to show improved binding capacity, larger binding constant and apparent maximum number for high-affinity sites, and significantly higher high-affinity binding site density in comparison with the MIP prepared via TRPP.     

Soap-free emulsion polymerization of styrene using poly(methacrylic acid) macro-RAFT agent

A well-defined poly(methacrylic acid) (PMAA) macro-RAFT agent has been synthesized by the bulk polymerization using 4-toluic acid dithiobenzoate as a RAFT agent and successfully employed as a reactive emulsifier in the soap-free emulsion polymerization of styrene, leading to a formation of stable latex. The amphiphilic block copolymer, prepared from the in situ micelle formation, contains a hydrophilic PMAA block and a hydrophobic PS block, via styrene monomer transfer reaction to the dithioester function in PMAA macro-RAFT agent during the nucleation step. The chemical structure of the synthesized PS with the PMAA macro-RAFT agent was confirmed using FTIR and NMR. In addition, it was confirmed that the macro-RAFT agent is present on the particle surface via the ESCA measurement. The reaction mechanism was proposed that the stable spherical particles enlarged by the aggregation of small particles, which were also produced by the chemical or physical bonding between the tiny small particles. The results indicate that the PMAA macro-RAFT agent is used as emulsifier for the formation of PS particles and block copolymer [P(S-b-MAA)] in situ.     

Dihydroxyl-terminated telechelic polymers prepared by RAFT polymerization using functional trithiocarbonate as chain transfer agent

A novel reversible addition-fragmentation chain transfer (RAFT) agent, S,S′-bis(2-hydroxylethyl-2′-butyrate)trithiocarbonate (BHEBT), was first successfully synthesized in the presence of an anion-exchange resin with OH⁻ form, and then it was used as chain transfer agent in RAFT polymerizations of styrene or methyl acrylate, the dihydroxyl-terminated polymers with controlled molecular weights and narrow molecular weight distributions were produced, which was confirmed by GPC, ¹H NMR spectra and kinetic analysis. Furthermore, these obtained telechelic polymers with trithiocarbonate group in the middle of the chains were used as macro chain transfer agents in the further RAFT polymerizations, and well-defined telechelic dihydroxyl-terminated triblock copolymers have been prepared successively. The structures were confirmed by their IR and ¹H NMR spectra.     

Kinetic study on reversible addition-fragmentation chain transfer (RAFT) process for block and random copolymerizations of styrene and methyl methacrylate

The degenerative (exchange) chain transfer constant C_ex was determined for the dithioacetate-mediated living radical block and random copolymerizations of styrene (St) and methyl methacrylate (MMA) at 40 °C. The addition of the polystyrene (PSt) radical to a polymer-dithioacetate adduct (P-X) to form the intermediate radical (PSt-(X)-P) was (about twice) faster than that of the poly(methyl methacrylate) (PMMA) radical to form the intermediate radical PMMA-(X)-P. The fragmentation (release) of the PMMA radical from the PSt-(X)-PMMA intermediate formed at the initiating stage of block copolymerization was much (about 100 times) faster than the release of the PSt radical, explaining why the block copolymerization of MMA from a PSt-dithiocarbonate adduct is not so satisfactory as that of St from a PMMA-dithiocarbonate adduct. In the random copolymerization, there was implicit penultimate unit effect on the exchange chain transfer process, which appeared in the addition process but not in the fragmentation process.     

Z-RAFT star polymerization of styrene: Comprehensive characterization using size-exclusion chromatography

Reversible addition-fragmentation chain transfer (RAFT) polymerizations of styrene in bulk at 80 °C using tri-, tetra-, and hexafunctional trithiocarbonates, in which the active RAFT groups are linked to the core via the stabilizing Z-group, were studied in detail. These Z-RAFT star polymerizations of styrene showed excellent molecular weight control up to very high monomer conversions and star sizes of more than 200 kDa. The application of high pressure up to 2600 bar was found to significantly increase the relative amount of living star polymer. Not even at very high monomer conversions and for large star molecules, a shielding effect of growing arms hampering the RAFT process could be identified. Absolute molecular weights of star polymers using a conventionally calibrated SEC setup were determined with high precision by using a mixture of linear and star-shaped RAFT agents. When using phenylethyl as the leaving R-group, well-defined star polymers that perfectly match the theoretical predictions were formed. However, when using benzyl as the leaving group, a pronounced impact of monomer conversion on the star polymer topology was observed and pure star polymers with the expected number of arms could not be obtained.     

Modeling RAFT polymerization kinetics via Monte Carlo methods: cumyl dithiobenzoate mediated methyl acrylate polymerization

Cumyl dithiobenzoate (CDB) mediated methyl acrylate (MA) bulk polymerizations at 80 °C, using CDB concentrations between 1.5×10⁻² and 5.0×10⁻² mol L⁻¹, were modeled via a novel Monte Carlo simulation procedure with respect to experimental time-dependent conversions, X, number average molecular weights, M_n, and weight average molecular weights, M_w. The simulations were based upon individual treatment of 5×10⁸ discrete molecules in accordance to their actual reaction pathways. The kinetic scheme employed includes termination reactions of intermediate RAFT radicals with propagating radicals and reaction steps of the RAFT pre-equilibrium, which are different from those of the RAFT main equilibrium. The equilibrium constant of the main equilibrium of the CDB/MA system at 80 °C was found to be K=1.2×10⁴ L mol⁻¹, indicating a relatively stable intermediate radical. The concentration of the intermediate RAFT radical, although not employed as experimental input data for the modeling, was calculated by using the obtained set of kinetic parameters as being in excellent agreement with experimental electron spin resonance spectroscopic data.