The characteristics of the external‐electrode mercury fluorescent lamp for backlighting liquid‐crystal‐television displays

Abstract— A reliable external‐electrode mercury fluorescent lamp (EEFL) has been developed for backlighting a liquid‐crystal‐television (LC‐TV) display. This involved the investigation of the EEFL characteristics and the improvement in the construction of the EEFL and drive waveforms, in the frequency range of 50–200 kHz, that affects the EEFL characteristics. The results showed that a sinusoidal waveform is suitable for driving the EEFL, and EEFL's voltage decreases when the frequency of the drive waveform is increased.     

Development and application of less‐mercury flat fluorescent lamps for backlights and general lighting

Abstract— A novel flat discharge fluorescent lamp used as the light source of backlight modules for LCDs and general lighting systems has been researched and developed. This new type of lamp is a less‐mercury flat fluorescent lamp with two‐dimensional emission and superior to conventional one‐dimensional cold‐cathode fluorescent lamps in terms of optics, energy‐savings, production efficiency, reliability, and chromatic performances. Physical characterization of the optics, temperature, mechanical design, thermal shocking, reliability, and corresponding environments have verified that flat fluorescent lamps will be the next‐generation light sources for backlight modules and general lighting systems.     

High‐performance high‐efficiency LED‐backlight driving system for LCD panels

Abstract— A high‐performance high‐efficiency LED‐backlight driving system for liquid‐crystal‐display panels is presented. The proposed LED‐backlight driving system is composed of a high‐efficiency DC‐DC converter capable of operating over a universal AC input voltage (75–265 V) and a high‐performance LED‐backlight sector‐dimming controller. The high efficiency of the system is achieved by using an asymmetrical half‐bridge DC‐DC converter that utilizes a new voltage‐driven synchronous rectifier and an LED‐backlight sector‐dimming controller. This controller regulates current using lossless power semiconductor switches (MOSFETs). The power semiconductor switches of the proposed DC‐DC converter, including the synchronous rectifier switch, operate with zero voltage, achieving high efficiency and low switch voltage stress using the asymmetrical‐PWM and synchronous rectifier techniques. To achieve high performance, the proposed driving system performs the sector dimming and the current regulation using low‐cost microcontrollers and MOSFET switching, resulting in high contrast and brightness. A100‐W laboratory prototype was built and tested. The experimental results verify the feasibility of the proposed system.     

TFT‐LCD driver IC with embedded non‐volatile memory for portable applications

Abstract— To improve the display quality and yield of the TFT‐LCD driver IC, non‐volatile multiple‐time‐programmable (MTP) memory, which consists of an EEPROM cell and our proposed sense amplifier and power control circuit (SP), was integrated into a TFT‐LCD driver IC. The proposed SP has a 30% smaller layout area and a 18% faster response time compared to that of the conventional SP. The proposed SP also has lower power consumption because it does not use a static current. The TFT‐LCD quality was also improved by tuning the characteristics of the driver IC and the panel with the VREF, OSC, and VCOM blocks, using non‐volatile MTP memory. When the display quality improved, the yield also improved, along with a reduction in the failure ratio of the display module, which consists of the driver IC and the panel. As a result, the TFT‐LCD driver IC with the non‐volatile MTP memory demonstrated improved display quality and a higher yield compared to conventional driver ICs without such a memory.     

Super‐large‐sized TFT‐LCD (55 in.) for HDTV application

Abstract— We have developed the world's largest TFT‐LCD, which has a 55‐in.‐diagonal size. This LCD features a 1920 × 1080 (16:9) resolution for full‐HDTV images, 500‐nit luminance, 72% color gamut, and 12‐msec response time at all gray levels. The size of the panel (55 in.) was determined by the maximum efficiency of our fifth‐generation line (glass size: 1100 × 1250 mm). To overcome the limitation of size in photolithography equipment, a new stitcking‐free technology was applied in both the TFT and color‐filter side. And the super‐IPS mode was used as a wide‐viewing‐angle technology because it is suitable in the fabrication of large panels. In this paper, we present issues on both the fabrication and characteristics of the 55‐in. TFT‐LCD.     

Comparisons of motion‐blur assessment strategies for newly emergent LCD and backlight driving technologies

Abstract— Compared to the conventional cathode‐ray‐tube TV, the conventional liquid‐crystal TV has the shortcoming of motion blur. Motion blur can be characterized by the motion‐picture response‐time metric (MPRT). The MPRT of a display can be measured directly using a commercial MPRT instrument, but it is expensive in comparison with a photodiode that is used in temporal‐response (temporal luminance transition) measurements. An alternative approach is to determine the motion blur indirectly via the temporal point‐spread function (PSF), which does not need an accurate tracking mechanism as required for the direct “spatial” measurement techniques. In this paper, the measured motion blur is compared by using both the spatial‐tracking‐camera approach and the temporal‐response approach at various backlight flashing widths. In comparison to other motion‐blur studies, this work has two unique advantages: (1) both spatial and temporal information was measured simultaneously and (2) several temporal apertures of the display were used to represent different temporal PSFs. This study shows that the temporal method is an attractive alternative for the MPRT instrument to characterize the LCD's temporal performance.     

A novel lens cap designed for the RGB LEDs installed in an ultra‐thin and directly lit backlight unit of large‐sized LCD TVs

Abstract— The objective of this study is to design a novel cone‐shaped lens cap on LEDs in order to achieve high optical efficiency in an ultra‐thin directly lit RGB LED backlight unit (BLU) for large‐sized LCD TVs. The use of the novel lens cap could play the role of a diffuser, a low light‐efficiency component in a BLU, in order to gain higher efficiency and simultaneously provide satisfactory uniformity in light distribution. The novel cone‐shaped lens is coated with aluminum on the outside surface of the cone for mirroring effects to reflect most of the LED emitted light horizontally and then reflect the light at the BLU boundaries, and then, finally to the output plane. In this way, bright spots on the output plane of the BLU can be avoided, leading to increased uniformity. Simulations were conducted to design and optimize varied aspects of the designed lens and BLU, including the cone angle of the proposed lens and the LED spacing (pitch). To further achieve color balance, a known Genetic Algorithm is used to search for the optimal angular placement of each RGB LED, resulting in better color balance. Finally, a prototype BLU for large‐sized 37‐in. LCD TVs with the proposed lens was built to verify the expected performance.     

An intensively lit collimating unit for the realization of a mosaic‐structured large‐scale RGB backlight

Abstract— To realize a large‐scale LCD backlight, a hexagon‐shaped single‐side micro‐structured light guide was developed. Three of the micro‐structured light‐guide plates are stacked and combined with a circular prism sheet (CPS) to form a unit backlight. The light guides couple azimuth light radiation from a side‐emitting LED that is mounted at the center of the light guides to air through a CPS in order to make a plane source out of a point source. The combination of stacked functional light guides with a CPS transforms convex toroidal‐shaped light radiation into a narrow cone whose center axis is perpendicular to the back surface of the liquid‐crystal panel. The light efficiency of the illumination unit is about 78% and the full‐width at half maximum of the collimated light is about 2 and 32.5° in the azimuth and radial directions, respectively.     

A fast transient LED driver with adaptive frequency control according to load variation for large‐sized LCD backlights

A fast transient light‐emitting diode (LED) driver is proposed for large‐sized liquid crystal display TV backlights in attempt to shorten the recovery time and to reduce the voltage fluctuation, while maintaining a high power efficiency. The direct current‐direct current (DC–DC) converter in the proposed LED driver accurately detects the load variation using the dimming data and then adjusts the slew rate and operating frequency according to the detected load variation. Thus, it rapidly controls the turn‐on time of the power switch and then controls the inductor current so that the output of the proposed LED driver can be accurately regulated during the load transient time. To verify the performance of the proposed LED driver, a DC–DC converter and an expandable LED current controller were fabricated using a 0.35‐μm bipolar–complementary metal–oxide–semiconductor (CMOS)–double‐diffused metal–oxide–semiconductor (DMOS) process technology and assembled with 48 LED channels for measurement. The measurement results show that the proposed LED driver improves the recovery time and voltage fluctuation by 45.1% and 45.6%, respectively. In addition, it achieves a maximum power of 115.2 W and a maximum power efficiency of 89.2%. Therefore, the proposed LED driver is suitable for high‐end applications such as large‐sized LED TV backlight modules.     

Thermal management of edge‐lit wide color gamut backlight for LCD using red laser diodes and cyan LEDs

The color gamut is one of the critical parameters that dictate the image quality of displays. The liquid crystal displays using white color light‐emitting diodes (LEDs) as the backlight, though having been widely employed recently, are not very satisfactory in terms of their color gamut because of the broad spectrum inherent to white LEDs. This prompted the authors to develop improved liquid crystal displays using an edge‐lit wide color gamut backlight that used red laser diodes and cyan LEDs. Generating laser beams with high color purity, the laser diodes are light sources with a significant effect on expanding the color gamut. However, laser diodes, red ones in particular, have unfavorable thermal characteristics. To cope with this shortcoming, the authors clearly defined the restrictive criteria for laying out two kinds of light source on the edge‐lit backlight and made a prototype 55‐type laser backlight for performance evaluation.     

Adaptive neuro‐fuzzy inference modelling and sensitivity analysis for capacity estimation of fiber reinforced polymer‐strengthened circular reinforced concrete columns

In this study, a fuzzy logic‐based model for predicting the ultimate strength of FRP‐confined circular reinforced concrete (RC) columns is presented. The adaptive neuro‐fuzzy inference system (ANFIS) model was generated using valid experimental data with seven input variables. Input parameters were considered in such a way that all the parameters affecting the compressive strength of the column were simultaneously involved. Different models for compressive strength of fiber reinforced polymer (FRP)‐confined concrete including the model in American Concrete Institute (ACI), to calculate the maximum stress endured by the column under axial load, were presented and compared with the results of the ANFIS model. Also, for similarity to other models, the ACI equation for calculating the maximum compressive strength tolerated by a column was considered without reducing coefficients as ACI‐N and was compared with other models. The results obtained from the ANFIS model were compared with results from other models. ANFIS model showed the highest accuracy among all models in predicting the experimental results.     

Numerical methods for the minimal non‐negative solution of the non‐symmetric coupled algebraic Riccati equation

In this paper, base on the theory of the non‐symmetric algebraic Riccati equation and the coupled Riccati equation, we give the general form of the non‐symmetric coupled algebraic Riccati equation (NCARE). In order to effectively solve the minimal non‐negative solution of the NCARE, two numerical iteration methods are improved: inexact Newton method (INewton) and alternate linear implicit method (ALI). Further, we give the convergence theory of the two iteration methods. Finally, we offer numerical examples to show the effectiveness of the derived methods.     

Contrast‐ratio analysis of sunlight‐readable color LCDs for outdoor applications

Abstract— This paper presents contrast‐ratio data measured from high‐brightness TFT color LCDs under various ambient illumination levels encountered in outdoor environments. In these measurements, several LCD front polarizers with anti‐glare (AG) and anti‐reflective (AR) coatings have been used. The measured contrast‐ratio data are compared and the impact due to the AG and AR coatings is briefly discussed. The test equipment that simulates different cases of outdoor illumination is also presented.     

A 513‐ppi FFS‐mode LCD using technique for changing part of active layer of oxide semiconductor to transparent electrode

We have established a technique for changing part of an active layer of an oxide semiconductor (OS) to a transparent electrode in order to achieve an aperture ratio of 50% or higher and a bezel width of 1 mm in an fringe field switching (FFS) mode LCD panel with a high resolution of 513 ppi. Furthermore, we have prototyped an LCD panel by examining a driving mode that enables low‐frequency driving.     

Iterative technique for analysis and design of circular leaky‐wave antenna for the 2.45‐GHz radio‐frequency identification applications

This paper suggests a new miniaturized antenna for radio‐frequency identification (RFID) applications of 2.45 GHz. Our structure consists of a circular microstrip patch antenna which incorporates two concentric annular slots is printed on a multilayer substrates. The bandwidth, one of the most important characteristics of antenna, can be significantly improved by using a multilayer dielectric configuration. we aim by this study to show that the effect of radiating structure loaded by annular rings for the patch size reduction as well as the advantage of this structure being to create a circular polarisation in the direction of maximal radiation pattern. The wave concept iterative procedure is used to analyse this new antenna. Using the proposed procedure, less computing time and memory are needed to calculate the electromagnetic parameters of our design. The validation of the results of our developed model was verified with known commercial software called “CST Microwave Studio Software” followed by an experimental test. According to the reached results, we can judge that our new design antenna is suitable for RFID applications in the 2.45 GHz band.     

Detrimental effects of O2 and CO2 on the cathode performance of flat‐matrix CRTs used for large‐scale flat displays

Abstract— The detrimental effects of O² and CO² on the cathode emissions of a flat‐matrix (FM) CRT and some methods which increase its life are described. Cathode emission gradually decreases over long‐term operation when an FM‐CRT is used as a tiling element in a large‐scale flat display. It is necessary that for the FM‐CRT the reduction of the emission current be within 10% in order to keep the operational life longer than 10,000 hours. The reason for the degradation of the cathode emission was clarified by experiments using high‐vacuum equipment. It was found from experiments that O² and CO², which are produced by the dissolution and activation of the oxide‐coated cathodes, are very harmful to emissions. It is, therefore, very important to lower the partial pressure of O² and CO² in the FM‐CRT in order to reduce their harmful influence on the oxide cathodes. Two methods were used to reduce their partial pressure in the FM‐CRT. One was to make the diameter of the evacuation tube larger and the other was to increase the quantity of the getters. It was found that the adoption of twice as many getters in the FM‐CRT was most useful in lowering the partial pressure of O² and CO². This has ensured that the life of an FM‐CRT is longer than 10,000 hours.     

Performance analysis and optimization of AMGA for the large‐scale virtual screening

This paper addresses performance issues on ARDA Metadata Grid Application (AMGA) and presents new techniques to improve the throughput of AMGA for the WISDOM environment. The first issue is a performance degradation problem when AMGA is used as a metadata service for task retrieval in the WISDOM environment. To deal with the issue, a new AMGA operation designed to reduce the communication overhead required to retrieve a task from AMGA is proposed. According to a performance study conducted with the new operation, the throughput of task retrieval using the proposed operation can be as much as 70 times higher than the throughput when using the existing AMGA operations. The second issue is an AMGA throughput issue in large‐scale grid‐enabled applications such as WISDOM, where it is not uncommon that thousands of jobs running on grid nodes access the AGMA service simultaneously. To address this issue, integration of a load‐balancing technique and a DB connection pool technique into the AMGA are proposed. Test results demonstrate that the performance can be improved linearly in proportion to the number of AMGA servers set up for load balancing; the performance improvement continues until the performance limit of the backend database system is reached. Copyright © 2009 John Wiley & Sons, Ltd.     

Robust Kalman filtering for nonlinear multivariable stochastic systems in the presence of non‐Gaussian noise

The presence of outliers can considerably degrade the performance of linear recursive algorithms based on the assumptions that measurements have a Gaussian distribution. Namely, in measurements there are rare, inconsistent observations with the largest part of population of observations (outliers). Therefore, synthesis of robust algorithms is of primary interest. The Masreliez–Martin filter is used as a natural frame for realization of the state estimation algorithm of linear systems. Improvement of performances and practical values of the Masreliez‐Martin filter as well as the tendency to expand its application to nonlinear systems represent motives to design the modified extended Masreliez–Martin filter. The behaviour of the new approach to nonlinear filtering, in the case when measurements have non‐Gaussian distributions, is illustrated by intensive simulations. Copyright © 2015 John Wiley & Sons, Ltd.     

A 3‐D unconditionally stable precise integration time domain method for the numerical solutions of Maxwell's equations in circular cylindrical coordinates

An unconditionally stable precise integration time‐domain method is extended to 3‐D circular cylindrical coordinates to solve Maxwell's equations. In contrast with the cylindrical finite‐difference time‐domain method, not only can it remove the stability condition restraint, but also make the numerical dispersion independent of the time‐step size. Numerical results are presented to demonstrate the effectiveness of this method. © 2008 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2009.