High‐resolution autostereoscopic 3‐D projection display with a space‐dividing iris‐plane shutter

Abstract— A high‐resolution autostereoscopic 3‐D projection display with a polarization‐control space dividing the iris‐plane liquid‐crystal shutter is proposed. The polarization‐control iris‐plane shutter can control the direction of stereo images without reducing the image quality of the microdis‐play. This autostereoscopic 3‐D projection display is 2‐D/3‐D switchable and has a high resolution and high luminance. In addition, it has no cross‐talk between the left and right viewing zones, a simple structure, and the capability to show multi‐view images.     

Efficiency analysis for multi‐view spatially multiplexed autostereoscopic 2‐D/3‐D displays

Abstract— The wide‐viewing freedom often requested by users of autostereoscopic displays can be delivered by spatial multiplexing of multiple views in which a sequence of images is directed into respective directions by a suitable autostereoscopic optical system. This gives rise to two important design considerations — the optical efficiency and the resolution efficiency of the device. Optical efficiency is particularly important in portable devices such as cell phones. A comparison is given between lens and barrier systems for various spatial multiplexing arrangements. Parallax‐barrier displays suffer from reduced optical efficiency as the number of views presented increases whereas throughput efficiency is independent of the number of views for lens displays. An autostereoscopic optical system is presented for the emerging class of highly efficient polarizer‐free displays. Resolution efficiency can be evaluated by investigating quantitative and subjective comparisons of resolution losses and pixel appearance in each 3‐D image. Specifically, 2.2‐in.‐diagonal 2‐D/3‐D panel performance has been assessed using Nyquist boundaries, human‐visual contrast‐sensitivity models, and autostereoscopic‐display optical output simulations. Four‐view vertical Polarization‐Activated Microlens technology with either QVGA mosaic or VGA striped pixel arrangements is a strong candidate for an optimum compromise between display brightness, viewing angle, and 3‐D pixel appearance.     

A high‐resolution autostereoscopic display system with a wide viewing angle using an LCOS projector array

Abstract— This study develops an autostereoscopic display based on a multiple miniature projector array to provide a scalable solution for a high‐resolution 3‐D display with large viewing freedom. To minimize distortion and dispersion, and to maximize the modulation transfer function (MTF) of the projection image to optimize 3‐D image quality, a dedicated projection lens and an accurate six‐axis adjusting platform for the miniature projector were designed and fabricated. Image‐blending technology based on a lookup table was adopted to combine images from 30 miniature projectors into a seamless single image. The result was a 35‐in. autostereoscopic display with 60 views ata 30° viewing angle, 90° FOV, and large range of viewing distance. The proposed system exhibits very smooth motion parallax when viewers move around in front of it.     

Influence of 3‐D cross‐talk on qualified viewing spaces in two‐ and multi‐view autostereoscopic displays

Abstract— To estimate the qualified viewing spaces for two‐ and multi‐view autostereoscopic displays, the relationship between image quality (image comfort, annoying ghost image, depth perception) and various pairings between 3‐D cross‐talk in the left and right views are studied subjectively using a two‐view autostereoscopic display and test charts for the left and right views with ghost images due to artificial 3‐D cross‐talk. The artificial 3‐D cross‐talk was tuned to simulate the view in the intermediate zone of the viewing spaces. It was shown that the stereoscopic images on a two‐view autostereoscopic display cause discomfort when they are observed by the eye in the intermediate zone between the viewing spaces. This is because the ghost image due to large 3‐D cross‐talk in the intermediate zone elicits different depth perception from the depth induced by the original images for the left and right views, so the observer's depth perception is confused. Image comfort is also shown to be better for multi‐views, especially the width of the viewing space, which is narrower than the interpupillary distance, where the parallax of the cross‐talking image is small.     

A 470 × 235‐ppi poly‐Si TFT‐LCD for high‐resolution 2‐D and 3‐D autostereoscopic displays

Abstract— We have developed a 470 × 235‐ppi poly‐Si TFT‐LCD with a novel pixel arrangement, called HDDP (horizontally double‐density pixels), for high‐resolution 2‐D and 3‐D autostereoscopic displays. 3‐D image quality is especially high in a lenticular‐lens‐equipped 3‐D mode because both the horizontal and vertical resolutions are high, and because these resolutions are equal. 3‐D and 2‐D images can be displayed simultaneously in the same picture. In addition, 3‐D images can be displayed anywhere and 2‐D characters can be made to appear at different depths with perfect legibility. No switching of 2‐D/3‐D modes is necessary, and the design's thin and uncomplicated structure makes it especially suitable for mobile terminals.     

Key design issues for autostereoscopic 2‐D/3‐D displays

Abstract— Flat‐panel 2‐D/3‐D autostereoscopic displays are now being commercialized in a variety of applications, each with its own particular requirements. The autostereoscopic display designer has two key considerations to address in order to meet customer needs — the optical output of the display (defined by the output window structure) and the choice of optical components. Window structure determines 3‐D image resolution, achievable lateral and longitudinal viewing freedom, crosstalk, and 3‐D fringe contrast. Optical‐component selection determines the quality of the imaging of such windows, viewing distances, device ruggedness, thickness, and brightness. Trade‐offs in window design are described, and a comparison of the leading optical component technologies is given. Selection of Polarisation Activated Microlenses? architectures for LCD and OLED applications are described. The technology delivers significant advantages particularly for minimising nominal viewing distances in high pixel density panels and optimizing device ruggedness while maintaining display brightness.     

Full‐parallax autostereoscopic display with scalable lateral resolution using overlaid multiple projection

Abstract— A method to increase the viewing resolution of an autostereoscopic display without increasing the density of microlenses is proposed. Multiple projectors are used for the projection images to be focused and overlaid on a common plane in the air behind the microlens array. The multiple overlaid projection images yield multiple light spots inside the region of each elemental lenslet of the microlens array. This feature provides scalable high‐resolution images by increasing the number of projectors. Based on the proposed method, a prototype display that includes 15 projectors was designed and built. 3‐D images were successfully reproduced on the prototype display with full parallax and a wide viewing angle of 70°.     

Depth‐map generation for multi‐view autostereoscopic 3‐D displays based on the SIFT algorithm constrained by boundary

Abstract— A depth‐map estimation method, which converts two‐dimensional images into three‐dimensional (3‐D) images for multi‐view autostereoscopic 3‐D displays, is presented. The proposed method utilizes the Scale Invariant Feature Transform (SIFT) matching algorithm to create the sparse depth map. The image boundaries are labeled by using the Sobel operator. A dense depth map is obtained by using the Zero‐Mean Normalized Cross‐Correlation (ZNCC) propagation matching method, which is constrained by the labeled boundaries. Finally, by using depth rendering, the parallax images are generated and synthesized into a stereoscopic image for multi‐view autostereoscopic 3‐D displays. Experimental results show that this scheme achieves good performances on both parallax image generation and multi‐view autostereoscopic 3‐D displays.     

Development of a 42‐in. 2‐D/3‐D switchable display using multi‐view technology for public‐information‐display applications

Abstract— A 42‐in. 2‐D/3‐D switchable display operating in a parallax‐barrier‐type system consisting of liquid‐crystal displays (LCDs) has been developed. The system displays 2‐D images in full resolution, without any degradation to the original 2‐D images, and 3‐D autostereoscopic images with resolutions higher than SVGA with wide viewing zones electrically controlled by the parallax‐barrier system. The system is intended for use in public‐information displays (PIDs), a booming field, and as displays for gaming, medical, and simulation applications.     

Projection‐type integral 3‐D display with distortion compensation

Abstract— Our research is aimed at developing a spatial‐imaging‐type integral three‐dimensional (3‐D) display based on an integral photography method using an extremely high‐resolution projector. One problem with the projection‐type integral 3‐D display is that geometrical distortion in projected elemental images causes spatial deformation of the displayed 3‐D image. In this study, a general relationship between the geometric distortion of elemental images and the spatial deformation of reconstructed 3‐D images were analyzed. A projection‐type integral 3‐D display with a distortion compensator which corrects the geometrical distortions of projected images in real‐time have been developed. The deformation of the displayed 3‐D images was significantly reduced by the distortion compensation, and the displayed 3‐D images had a resolution of 182 (H) × 140 (V) pixels and a viewing angle of 24.5°.     

Distributed real-time rendering for ultrahigh-resolution multiscreen 3D display

Large-scale autostereoscopic three-dimensional (3D) displays can give audiences a truly immersive feeling with strong visual impact. However, the traditional autostereoscopic 3D display systems are limited by the display hardware, making it difficult to directly achieve large-scale 3D displays with high resolution. Multiscreen splicing with laser backlights can be used for large-scale and ultrahigh-resolution 3D display, but it normally results in subscreen image asynchronization, view zone error, or obvious edge overlapping. To solve the problems mentioned above, a distributed real-time rendering system for ultrahigh-resolution multiscreen 3D display is proposed. Fifteen 3D LCD display devices are driven through a host, cooperating with laser backlights, a lenticular lens array (LLA), and a directional diffuser to display high resolution, high frame rate, large size, and wide-viewing angle 3D images. The resolution of the whole display system can reach 23,040 × 21,600. The rendering system provides a large-scale and real-time 3D scene image with an ultrahigh-definition resolution at a speed of 40 frames per second and high quality.     

Projection‐based head‐tracking 3‐D displays

Abstract— This paper describes the construction and operation of four 3‐D displays in which each display produces two images for each eye and thus fits into the category of projection‐based binocular stereoscopic displays. The four 3‐D displays described are pico‐projector‐based, liquid‐ crystal—on—silicon (LCOS) conventional projector‐based, 120‐Hz digital‐light‐processor (DLP) projector‐ based, and the HELIUM3D system. In the first three displays, images are produced on a direct‐view LCD whose conventional backlight is replaced with a projection illumination source that is controlled by a multi‐user head tracker; novel steering optics direct the projector output to regions referred to as exit pupils located at the viewers' eyes. In the HELIUM3D display, the image information is supplied by a horizontally scanned, fast, light valve whose output is controlled by a spatial light modulator (SLM) to direct images to the appropriate viewers' eyes. The current statu s and the multimodal potential of the HELIUM3D display are described.     

Multi‐viewer autostereoscopic display with dynamically addressable holographic backlight

Abstract— The Multi‐User 3‐D Television Display (MUTED), designed to provide three‐dimensional television (3‐D TV) by the display of autostereoscopic imagery to multiple viewers, each of whom should enjoy freedom of movement, is described. Such an autostereoscopic display system, which allows multiple viewers simultaneously by the use of head tracking, was previously demonstrated for TV applications in the ATTEST project. However, the requirement for a dynamically addressable, steerable backlight presented several problems for the illumination source. The MUTED system demonstrates significant advances in the realization of a multi‐user autostereoscopic display, partly due to the provision of a dynamic backlight employing a novel holographic laser projector. Such a technology provides significant advantages in terms of brightness, efficiency, laser speckle, and the ability to correct for optical aberrations compared to both imaging and scanned‐beam projection technologies.     

A common approach to characterizing autostereoscopic and polarization‐based 3‐D displays

Abstract— Autostereoscopic and polarization‐based stereoscopic 3‐D displays recreate 3‐D images by providing different images in the two eyes of an observer. This aim is achieved differently for these two families of 3‐D displays. It is shown that viewing‐angle measurements can be applied to characterize both types of displays. Viewing‐angle luminance measurements are made at different locations on the display surface for each view emitted by the display. For autostereoscopic displays, a Fourier‐optics instrument with an ultra‐high‐angular‐resolution VCMaster3D is used. For polarization‐based displays, a standard Fourier‐optics instrument with additional glass filters is used. Then, what will be seen by an observer in front of the display is computed. Monocular and binocular quality criteria (left‐ and right‐eye contrast, 3‐D contrast) was used to quantify the ability to perceive depth for any observer position. Qualified monocular and binocular viewing spaces (QMVS and QBVS) are deduced. Precise 3‐D characteristics are derived such as maximum 3‐D contrast, optical viewing freedom in each direction, color shifts, and standard contrast. A quantitative comparison between displays of all types becomes possible.     

3‐D crosstalk and luminance uniformity from angular luminance profiles of multiview autostereoscopic 3‐D displays

Abstract— Autostereoscopic 3‐D display technologies enable a more immersive media experience by adding real depth to the visual content. However, the method used for the creation of a sensation of depth or stereo illusion contains several display design and content‐related issues that need to be carefully considered to maintain sufficient image quality. Conventionally, methods used for 3‐D image‐quality evaluations have been based on subjective testing. Optical measurements, in addition to subjective testing, can be used as an efficient tool for 3‐D display characterization. Objective characterization methods for autostereoscopic displays have been developed. How parameters affecting stereo image quality can be defined and measured, and how their effect on the stereo image quality can be evaluated have been investigated. Developed characterization methods are based on empirically gathered data. In this paper, previously presented methodology for two‐view displays is extended to cover autostereoscopic multiview displays. A distinction between displays where the change in content occurs in clear steps when the user moves in front of the display, and displays where the apparent movement of the objects is more continuous as a function of the head movement is made. Definitions for 3‐D luminance and luminance uniformity, which are equally important, as well as 3‐D crosstalk, which is the dominant factor in the evaluations of the perceived 3‐D image quality, is focused upon.     

MUTED: Multi‐user 3‐D display

Abstract— Research described in this paper encompasses the design and building of glasses‐free (autostereoscopic) displays that utilize a direct‐view liquid‐crystal display whose backlight is provided by a projector and novel steering optics. This is controlled by the output of a multi‐user head‐position tracker. As the displays employ spatial multiplexing on a liquid‐crystal‐display screen, they are inherently 2‐D/3‐D switchable with 2‐D being achieved by simply displaying the same image in the left and right channels. Two prototypes are described in this paper; one incorporating a holographic projector and the other a conventional LCOS projector. The LCOS projector version addresses the limitations of brightness, cross‐talk, banding in the images, and laser stability that occur in the holographic projector version. The future development is considered and a comparison between the prototypes and with other 3‐D displays is given.     

3‐D mobile display based on dual‐directional light guides with a fast‐switching liquid‐crystal panel

Abstract— An autostereoscopic display based on dual‐directional light guides with a fast‐switching liquid‐crystal panel was designed and fabricated to provide better 3‐D perception with image qualities comparable to that of 2‐D displays. With two identical micro‐grooved light guides, each with a light‐controlled ability in one direction, two restricted viewing cones are formed to project pairs of parallax images to the viewer's respective eyes sequentially. Crosstalk of less than 10% located within ±8°–±30° and an LC response time of 7.1 msec for a 1.8‐in. LCD panel can yield acceptable 3‐D perceptions at viewing distance of 5.6–23 cm. Moreover, 2‐D/3‐D compatibility is provided in this module.     

The auto‐geometric correction of multi‐projector for cylindrical surface using Bézier patches

Geometric calibration to projection images is an indispensable operation for projection‐based spatial display. In this paper, we propose a new method for correcting images generated in a computer onto a cylindrical surface accurately, which can project a high‐resolution projection image with pixels matching avoiding too much manual operation. Images waiting to be projected are pre‐warped according to the rough correspondence between projectors and physical surface. To solve the errors resulting from unexpected pixel shifts in overlap projection area, we fit the Bézier interpolation to the images and apply the optimization theory with added constraints to correct the projection image accurately. This optimization process, by taking the pixels with specific significance on the images as the basis of calculation, avoids the traditional ways of translating the control points of the Bézier surface directly. The final results achieve a completely accurate projection picture even if the projection surface shape is inaccurate and irregular. We present the details of the proposed accurate calibration algorithm and illustrate our method, which, with its scalability, can achieve perfect projection efficiently and accurately with experiments.     

Effect of number of views to the viewing experience with autostereoscopic 3‐D displays

Abstract— The observers' 3‐D viewing experience when the way the content is created and shown on an autostereoscopic 3‐D display alternate is evaluated. The observer's depth impression, and the perceived contour accuracy and image naturalness or peskiness of the content shown on a 3‐D display, has been investigated. In addition, the consequences of the way the content is created to the results from the optical characterization for the same display have been studied. The alternation of the content was realized in two different ways. Firstly, the number of views for creating the image was varied. Two, five, and 14 views were used; the main focus being on testing the same display and treating it as an ordinary two‐view and a 14‐view display with inter‐sub‐view crosstalk. Also, the intermediate condition where five views with non‐uniform view‐specific crosstalk were used has been investigated. Secondly, the way the content is created was varied by using images with computer‐generated content and photos. The effect of these parameters on viewing experience as such and especially the effect of 3‐D crosstalk on the viewing experience were studied.     

Floating autostereoscopic display with in situ interaction

Floating three‐dimensional (3D) display implements direct interaction between human hands and virtual 3D images, which offers natural and effective augmented reality interaction. In this study, we propose a novel floating autostereoscopic display, combining head tracking lenticular display with an image projection system, to offer the observers with an accurate 3D image floating in midair without any optical elements between observers and the virtual 3D image. Combined with a gesture recognition device, the proposed system can achieve in situ augmented reality interaction with the floating 3D image. A distortion correction method is developed to achieve 3D display with accurate spatial information. Moreover, a coordinate calibration method is designed to improve the accuracy in the in situ interaction. Experiments were performed to prove the feasibility of the proposed system, and the good results show the potential of human‐computer interaction in medicine and life sciences.