混合胺改性SBA-15的二氧化碳吸附特性

为实现廉价高效的二氧化碳捕集，新型燃烧后CO₂捕集固体吸附材料的设计和开发具有重要的研究意义。为提高CO₂吸附量，胺功能化改性吸附剂的方法主要有湿浸渍和表面嫁接。基于此，提出了“混合胺”修饰的概念，把湿浸渍和表面嫁接两种改性技术结合起来。把3-氨丙基三甲氧基硅烷（APTS）嫁接到分子筛SBA-15孔道表面，再把聚乙烯亚胺（PEI）浸渍到载体孔道的间隙，制备出高密度胺功能化的CO₂吸附剂。主要考察了不同含量的PEI和APTS功能化SBA-15的结构性能、CO₂吸附量及胺吸附效率。CO₂吸附结果表明，混合胺功能化SBA-15吸附主要依赖于动力学扩散。其中，SBA-15-（APTS-0.5-PEI-50），SBA-15-（APTS-1.0-PEI-50）和SBA-15-（APTS-2.0-PEI-30）在75℃时具有很好的吸附潜力。混合胺功能化SBA-15的胺吸附效率介于单纯嫁接和单纯浸渍的胺功能化SBA-15之间。     

CO2 capture by adsorption with nitrogen enriched carbons

The success of CO₂ capture with solid sorbents is dependent on the development of a low cost sorbent with high CO₂ selectivity and adsorption capacity. Immobilised amines are expected to offer the benefits of liquid amines in the typical absorption process, with the added advantages that solids are easy to handle and that they do not give rise to corrosion problems. In this work, different alkylamines were evaluated as a potential source of basic sites for CO₂ capture, and a commercial activated carbon was used as a preliminary support in order to study the effect of the impregnation. The amine coating increased the basicity and nitrogen content of the carbon. However, it drastically reduced the microporous volume of the activated carbon, which is chiefly responsible for CO₂ physisorption, thus decreasing the capacity of raw carbon at room temperature.     

Thermodynamics and regeneration of CO2 adsorption on mesoporous spherical-silica particles

Mesoporous spherical-silica particles (MSPs) were modified by N-[3-(trimethoxysilyl) propyl]ethylenediamine (EDA) solution and were employed as sorbents to study thermodynamics and regeneration of CO₂ adsorption from gas streams. The thermodynamic analysis gave low isosteric heats of adsorption, which are typical for physical adsorption. The cyclic CO₂ adsorption on MSP(EDA) showed that the adsorbed CO₂ could be effectively desorbed via thermal treatment at 120 °C for 25 min while the adsorbed CO₂ due to physical interaction could be effectively desorbed via vacuum suction at 0.145 bar for 30 min. If a combination of thermal treatment and vacuum suction was conducted at 120 °C and 0.145 bar, the time for effectively desorbing CO₂ could be shortened to 7.5 min and thus reduces a significant amount of energy penalty. The adsorption capacities and the physicochemical properties of MSP(EDA) were preserved after 15 cycles of adsorption and regeneration. These results suggest that the MSP(EDA) can be stably employed in the prolonged cyclic adsorption and that they are thus possibly cost-effective sorbents for CO₂ capture from flue gases.     

Stepwise growth of melamine-based dendrimers into mesopores and their CO2 adsorption properties

A series of CO₂ adsorbents were synthesized by functionalizing SBA-15 via stepwise growth of amine-terminated melamine-based dendrimers. The adsorbents contained very high organic loadings (up to 50.3 wt%) relative to previous reports. In addition to that, CO₂ adsorption measurements demonstrated that primary amine groups are the only active groups within these dendritic structures for CO₂ adsorption. The CO₂ adsorption capacities of these adsorbents (except for fourth generation dendrimer functionalized SBA-15) are improved relative to the unfunctionalized SBA-15. The exception is associated with the completely filled pores of this adsorbent.     

Highly accessible SnO2 nanoparticle embedded SBA-15 mesoporous silica as a superior photocatalyst

We address the accessibility of tin oxide (SnO₂) nanoparticles synthesized inside the pores of mesoporous silica (SBA-15) host. On using a low-temperature route for in situ synthesis of SnO₂ and hence eliminating interparticle aggregation, SnO₂ nanoparticles of diameter much smaller (3.5 nm) than the cylindrical pore diameter (6.3 nm) of the SBA-15 could be synthesized. This enables molecules diffusing into the SBA-15 pores to access the very high specific surface area of SnO₂; enabling the diffusing species to react easily with the latter. This is demonstrated by an enhanced photocatalytic degradation rate constant of an aqueous solution of rhodamine B dye, on contacting the latter with the SnO₂-SBA-15 composite.     

Deactivation mechanism of Pd supported on ordered and non-ordered mesoporous silica in the direct H2O2 synthesis using CO2-expanded methanol

The deactivation mechanism of Pd supported on silica and mesoporous silica (SBA-15) using CO₂-expanded methanol as solvent was studied in the direct synthesis of H₂O₂ in batch and semi-continuous batch reactor tests as well as its hydrogenolysis. Fresh and used catalysts were characterized by TPR and CO chemisorption. The results evidence the presence of deactivation, which can be correlated to the loss of accessible active metal surface area due to sintering of Pd, but there is also an effect of the presence of the ordered mesoporous structure and of the reaction conditions. The higher concentration of H₂ in solution in semi-continuous batch reactor tests with respect to batch reactor tests leads to a more relevant deactivation in Pd-SiO₂ with respect to Pd-SBA-15, but a higher initial activity, due to the fact that H₂ accelerates the reduction of the Pd species which are less reducible in Pd-SiO₂ than in Pd-SBA-15. Pd-SBA-15 shows a higher H₂O₂ selectivity and productivity with respect to Pd-SiO₂ in batch reactor tests, related to the presence of easier reducible Pd species. Another difference is related to the different mechanism of sintering. On the SBA-15 support, due to the presence of the ordered mesoporosity, the Pd particles migrate into the SBA-15 channels forming elongated 1D-type particles. In Pd-SiO₂ catalyst, instead, the sintering of the Pd particles leads to large aggregates of Pd particles in the range of 20-25 nm.     

Thermodynamic performance of O2/CO2 gas turbine cycle with chemical recuperation by CO2-reforming of methane

This paper proposes a novel power cycle system composed of chemical recuperative cycle with CO₂–NG (natural gas) reforming and an ammonia absorption refrigeration cycle. In which, the heat is recovered from the turbine exhaust to drive CO₂–NG reformer firstly, and then lower temperature heat from the turbine exhaust is provided with the ammonia absorption refrigeration system to generate chilled media, which is used to cool the turbine inlet gas except export. In this paper, a detailed thermodynamic analysis is carried out to reveal the performance of the proposed cycle and the influence of key parameters on performance is discussed. Based on 1 kg s⁻¹ of methane feedstock and the turbine inlet temperature of 1573 K, the simulation results shown that the optimized net power generation efficiency of the cycle rises up to 49.6% on the low-heating value and the exergy efficiency 47.9%, the new cycle system reached the net electric-power production 24.799 MW, the export chilled load 0.609 MW and 2.743 kg s⁻¹ liquid CO₂ was captured, achieved the goal of CO₂ and NO_x zero-emission.     

Nanocrystalline CeO2 in SBA-15: Performance of Pt/CeO2/SBA-15 Catalyst for Water-gas-shift Reaction

CeO₂ particles confined within the pores of an SBA-15 mesoporous silica host were prepared by incipient wetness impregnation (IMP) and deposition precipitation (DP) methods. The materials were characterized by XRD, N₂-adsorption and temperature programmed reduction (TPR) to evaluate the structure, texture, and redox properties. The preparation procedure had significant impact on the assembling mode of CeO₂ inside the SBA-15 mesopores. A high dispersion of CeO₂ particles was achieved via DP, whereas the dispersion of CeO₂ prepared by IMP was found to be inhomogeneous and CeO₂ partially blocked the pores. The CO conversion in the water-gas-shift reaction was enhanced over 1 wt% Pt supported on CeO₂-modified SBA-15 obtained by DP.     

Simultaneous easy CO2 recovery and drastic reduction of SOx and NOx in O2/CO2 coal combustion with heat recirculation

Coal combustion with O₂/CO₂ is promising because of its easy CO₂ recovery, extremely low NO_x emission and high desulfurization efficiency. Based on our own fundamental experimental data combined with a sophisticated data analysis, its characteristics were investigated. It was revealed that the conversion ratio from fuel-N to exhausted NO in O₂/CO₂ pulverized coal combustion was only about one fourth of conventional pulverized coal combustion. To decrease exhausted NO further and realize simultaneous easy CO₂ recovery and drastic reduction of SO_x and NO_x, a new scheme, i.e. O₂/CO₂ coal combustion with heat recirculation, was proposed. It was clarified that in O₂/CO₂ coal combustion, with about 40% of heat recirculation, the same coal combustion intensity as that of coal combustion in air could be realized even at an O₂ concentration of as low as 15%. Thus exhausted NO could be decreased further into only one seventh of conventional coal combustion. Simultaneous easy CO₂ recovery and drastic reduction of SO_x and NO_x could be realized with this new scheme.     

A comparative investigation on the properties of Cr-SBA-15 and CrOx/SBA-15

High-surface area and well-ordered mesoporous Cr-incorporated SBA-15 (Cr-SBA-15) and SBA-15-supported chromia (CrO_x/SBA-15) with Cr surface density = 0.05–1.11 Cr-atom/nm² have been prepared, respectively, using the one-step synthesis and incipient wetness impregnation method, and characterized by AAS, XRD, BET, ESEM, TEM, XPS, laser Raman, UV-Vis, FT-IR, and H₂-TPR. It is observed that the Cr-SBA-15 and CrO_x/SBA-15 samples showed an evolution of surface morphology from long chain-shaped to short rod-like and further to an irregularly spherical architecture at elevated Cr content, which might arise from the interaction of Cr ions or CrO_x domains with SBA-15. There were co-presence of tetrahedrally coordinated mono- and poly-chromate (Cr⁶⁺) as well as octahedrally coordinated Cr³⁺ species in Cr-SBA-15 and CrO_x/SBA-15, with the Cr⁶⁺ species being dominant at Cr surface density ≤0.22 Cr-atom/nm² in Cr-SBA-15 and Cr ≤0.54 Cr-atom/nm² in CrO_x/SBA-15, whereas the amount of the Cr³⁺ species increased markedly at Cr surface density ≥0.53 Cr-atom/nm² due to the formation of crystal Cr₂O₃ phase. Maximal Cr incorporation into Cr-SBA-15 and one monolayer surface CrO_x coverage on CrO_x/SBA-15 occurred at Cr surface density ≤0.53 Cr-atom/nm² and <1.11 Cr-atom/nm², respectively. The CrO_x/SBA-15 samples exhibited better reducibility than the Cr-SBA-15 samples, with the best reducibility exhibited at Cr surface densities of 0.54 and 0.12 Cr-atom/nm², respectively.     

Photoinduced activation of CO2 on TiO2 surfaces: Quantum chemical modeling of CO2 adsorption on oxygen vacancies

Chemical processes that utilize CO₂ emissions from coal-fired power plants will be required as the world progresses towards reducing CO₂ emissions. The conversion of CO₂ using light energy (CO₂ photoreduction) has the potential to produce useful fuels or valuable chemicals while decreasing CO₂ emissions from the use of fossil fuels such as coal. Computational studies on the initial steps of photoinduced CO₂ activation on TiO₂ surfaces, necessary to develop a mechanistic understanding of CO₂ photoreduction are a focus of this article.The results from previous quantum mechanical modeling studies conducted by the authors indicated that stoichiometric TiO₂ surfaces likely do not promote electron transfer to CO₂. Therefore, the role of oxygen vacancies in promoting the light-induced conversion of CO₂ (CO₂ photoreduction) on TiO₂ surfaces was examined in this study. Two different side-on bonded bent-CO₂ (bridging Ti-CO₂^δ•−-Ti species) were formed on the reduced rutile (110) and anatase (010), (001) surfaces, indicating charge transfer from the reduced surface to CO₂. Further steps in the photoexcitation of these bent-CO₂ species were investigated with density functional theory calculations. Consistent with CO₂ adsorption and photodesorption on other n-type metal oxides such as ZrO₂, the results suggest that the bent-CO₂ species do not gain further charge from the TiO₂ surface under illumination and are likely photodesorbed as neutral species. Additionally, although the formation of species such as CO and HCHO is thermodynamically possible, the energy needed to regenerate the oxygen vacancy on TiO₂ surfaces (~ 7 eV) is greater than that available through band-gap illumination (3.2 eV). Therefore, CO₂ reactions with water on irradiated anatase TiO₂ surfaces are likely to be stoichiometric.     

Direct synthesis of mesoporous silicalite-1 supported TiO2–ZrO2 for the dehydrogenation of EB to styrene with CO2

Direct synthesis route was developed to support TiO₂–ZrO₂ binary metal oxide onto the carbon templated mesoporous silicalite-1 (CS-1). Metal hydroxide modified carbon particles could play a role as hard template and simultaneously support metal components on the mesopores during the crystallization of zeolites. Such supported TiO₂–ZrO₂ binary metal oxides (TZ/CS-1) showed better resistance to deactivation in the oxidative dehydrogenation of ethylbenzene (ODHEB) in the presence of CO₂. These catalysts were found to be active, selective and catalytically stable (10 h of time-on-stream) at 600 °C for the dehydrogenation of ethylbenzene (EB) to styrene (Sty).     

Impact of SO2 concentration on the corrosion rate of X70 steel and iron in water-saturated supercritical CO2 mixed with SO2

The corrosion behavior of X70 steel and iron in water-saturated supercritical CO₂ mixed with SO₂ was investigated using weight-loss measurements. As a comparison, the instantaneous corrosion rate in the early stages for iron in the same corrosion environment was measured by resistance relaxation method. Surface analyzes using SEM/EDS, XRD and XPS were applied to study the morphology and chemical composition of the corroded sample surface. Weight-loss method results showed that the corrosion rate of X70 steel samples increased with SO₂ concentration, while the corrosion rate increased before decreasing with SO₂ concentration for iron sample. Comparing resistance relaxation method results with weight-loss method results, it is found that the instantaneous corrosion rate of iron is much higher than the uniform corrosion rate of the iron tablet specimens which are covered with thick corrosion product films after a long period of corrosion. The corrosion product films were mainly composed of FeSO₄ and FeSO₃ hydrates. The possible reaction mechanism under such environment was also analyzed, and the electrochemical reaction between the dissolved SO₂ in the condensed water film with iron is the critical reaction step.     

Properties of char particles obtained under O2/N2 and O2/CO2 combustion environments

Pulverized coal combustion in O₂/N₂ and O₂/CO₂ environments was investigated with a drop tube furnace. Results present that the reaction rate and burn-out degree of O₂/CO₂ chars (obtained in O₂/CO₂ environments) are lower than that of O₂/N₂ chars (obtained in O₂/N₂ environments) under the same experimental condition. It indicates that a higher O₂ concentration in O₂/CO₂ environment is needed to achieve the similar combustion characteristic to that in O₂/N₂ environment. The main differences between O₂/N₂ and O₂/CO₂ chars rely on the pore structure determined by N₂ adsorption and chemical structure measured by FT-IR. For O₂/CO₂ char, the surface is thick and the pores are compact which contribute to the fragmentation reduction of particles burning in O₂/CO₂ environment. The organic functional group elimination rate from the surface of O₂/CO₂ chars is slower or delayed. The present research results might have important implications for further understanding the intrinsic kinetics of pulverized coal combustion in O₂/CO₂ environment.     

Improvement of coke resistance of Ni/Al2O3 catalyst in CH4/CO2 reforming by ZrO2 addition

This work investigates the improvement of Ni/Al₂O₃ catalyst stability by ZrO₂ addition for H₂ gas production from CH₄/CO₂ reforming reactions. The initial effect of Ni addition was followed by the effect of increasing operating temperature to 500–700 °C as well as the effect of ZrO₂ loading and the promoted catalyst preparation methods by using a feed gas mixture at a CH₄:CO₂ ratio of 1:1.25. The experimental results showed that a high reaction temperature of 700 °C was favored by an endothermic dry reforming reaction. In this reaction the deactivation of Ni/Al₂O₃ was mainly due to coke deposition. This deactivation was evidently inhibited by ZrO₂, as it enhances dissociation of CO₂ forming oxygen intermediates near the contact between ZrO₂ and nickel where the deposited coke is gasified afterwards. The texture of the catalyst or BET surface area was affected by the catalyst preparation method. The change of the catalyst texture resulted from the formation of ZrO₂–Al₂O₃ composite and the plugging of Al₂O₃ pore by ZrO₂. The 15% Ni/10% ZrO₂/Al₂O₃ co-impregnated catalyst showed a higher BET surface area and catalytic activity than the sequentially impregnated catalyst whereas coke inhibition capability of the promoted catalysts prepared by either method was comparable. Further study on long-term catalyst stability should be made.     

The influence of precursors on Rh/SBA-15 catalysts for N2O decomposition

Series of Rh/SBA-15 catalysts were prepared by impregnation and grafting method applying different Rh precursors. The catalytic behaviors of N₂O decomposition over these catalysts were tested in an automated eight flow reactor system. The catalysts were characterized by X-ray fluorescence spectroscopy (XRF), X-ray diffraction (XRD), N₂ adsorption/desorption, transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) techniques. The results showed that the dispersion of Rh species on the catalysts is closely related to the molecular size and the hydrophobic property of the precursors comparing to the hydrophilic support, better dispersion results were found in catalysts by impregnation of smaller precursors, while by grafting better dispersion resulted from big precursor. On the other hand, the activities of the catalysts match well with the Rh dispersion status. Rh/SBA-15-CDCR starting from [(CO)₂RhCl]₂ showed good dispersion and gave the best N₂O decomposition activity.     

Effect of TiO2 particle size on the photocatalytic reduction of CO2

Pure TiO₂ anatase particles with a crystallite diameters ranging from 4.5 to 29 nm were prepared by precipitation and sol–gel method, characterized by X-ray diffraction (XRD), BET surface area measurement, UV–vis and scanning electron microscopy (SEM) and tested in CO₂ photocatalytic reduction. Methane and methanol were the main reduction products. The optimum particle size corresponding to the highest yields of both products was 14 nm. The observed optimum particle size is a result of competing effects of specific surface area, charge–carrier dynamics and light absorption efficiency.     

Surface sol–gel modification of mesoporous silica molecular sieve SBA-15 with TiO2 in supercritical CO2

Mesoporous silica molecular sieve SBA-15 has been grafted with monolayer and doublelayer of titanium dioxide via surface sol–gel process in supercritical carbon dioxide (SC CO₂). The materials were characterized by nitrogen adsorption, X-ray photoelectron, X-ray diffraction (XRD), and Raman spectroscopy. The results suggest that the incorporated titanium dioxide is present mainly as anatase phase. The pore diameter decreases with the modification cycle number, and the titanium dioxide exists as a 5 Å thick film chemically anchored on the mesopores of SBA-15.     

Effect of the preparation method on the structural stability and hydrodesulfurization activity of NiMo/SBA-15 catalysts

Defined hexagonal cylindrical pore structure SBA-15 material was synthesized as support for hydrotreating catalysts. The stability of the mesoporous material under acid and basic environments commonly used to prepare hydrotreating catalysts was investigated. The effects of the acid and basic treatments on the stability of SBA-15 and NiMo/SBA-15 catalysts were evidenced by different characterization techniques such as N₂ adsorption–desorption, X-ray diffraction (XRD), Raman Spectroscopy and high resolution transmission electron microscopy (HRTEM). Supported NiMo/SBA-15 catalysts prepared by pore volume co-impregnation in acidic, neutral and basic solutions of the Ni and Mo precursor salts were characterized to evaluate the textural and structural changes caused by the method of preparation. Characterization of the support after accelerated stability tests indicates large deterioration of the SBA-15 structural order at basic pH. The characterization results of oxide and sulfided catalysts indicate, for the catalysts prepared at high pH, an increasing presence of β–NiMoO₄ phase in the oxide catalysts, and a relatively lower population of MoS₂ in the sulfided catalysts. The activity of the different catalysts evaluated in the thiophene hydrodesulfurization reaction was higher for the catalysts prepared at low pH.