Novel anion‐exchange organic‐inorganic hybrid membranes prepared through sol‐gel reaction and UV/thermal curing

Anion‐exchange organic‐inorganic hybrid membranes were prepared through sol‐gel reaction and UV/thermal curing of positively charged alkoxysilane and the alkoxysilane containing acrylate or epoxy groups. Properties of prepared hybrid membranes were varied by control of the molar ratio of the precursors. It was shown that the thermal degradation temperatures (T_d) of the membranes were in the range of 212–226°C, water uptakes in the range of 9.6–14.6% and IEC values in the range of 0.9–1.6 mmol g^?1. The hybrid membranes show high permeability to anions, as reflected by the high static transport number (t_?) of the anion (Cl^?). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Free‐standing hybrid anion‐exchange membranes for application in fuel cells

A series of free‐standing hybrid anion‐exchange membranes were prepared by blending brominated poly(2,6‐dimethyl‐1,4‐phenylene oxide) (BPPO) with poly(vinylbenzyl chloride‐co‐γ‐methacryloxypropyl trimethoxy silane) (poly(VBC‐co‐γ‐MPS)). Apart from a good compatibility between organic and inorganic phases, the hybrid membranes had a water uptake of 32.4–51.8%, tensile strength around 30 MPa, and T_d temperature at 5% weight loss around 243–261°C. As compared with the membrane prepared from poly (VBC‐co‐γ‐MPS), the hybrid membranes exhibited much better flexibility, and larger ion‐exchange capacity (2.19–2.27 mmol g^?1) and hydroxyl (OH^?) conductivity (0.0067–0.012 S cm^?1). In particular, the hybrid membranes with 60–75 wt % BPPO had the optimum water uptake, miscibility between components, and OH^? conductivity, and were promising for application in fuel cells. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation and characterization of a poly(vinyl alcohol)/tetraethoxysilane ultrafiltration membrane by a sol–gel method

Using poly(vinyl alcohol) (PVA) with highly hydrophilic properties as membrane material and poly(ethylene glycol) (PEG) as an additive, we prepared PVA/tetraethoxysilane (TEOS) ultrafiltration (UF) membranes with good antifouling properties by a sol–gel method. The PVA/TEOS UF membranes were characterized by X‐ray diffraction patterns, Fourier transform infrared spectroscopy, scanning electron microscopy, and static contact angle of measurement of water. The hybridization of TEOS to PVA for preparing the PVA/TEOS UF membranes achieved the required permeation performance and good antifouling behaviors. The morphology and permeation performance of the PVA/TEOS membranes varied with the different TEOS loadings and PEG contents. The pure water fluxes (J_W) increased and the rejections (Rs) decreased with increasing TEOS loading and PEG content. The PVA/TEOS UF membrane with a PVA/TEOS/PEG/H₂O composition mass ratio of 10/3/4/83 in the dope solution had a J_W of 66.5 L m^?2 h^?1 and an R of 60.3% when we filtered it with 300 ppm of bovine serum albumin aqueous solution at an operational pressure difference of 0.1 MPa. In addition, the filtration and backwashing experiment proved that the PVA/TEOS membranes possessed good long‐term antifouling abilities. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4066–4074, 2013     

Comparative study of poly(vinyl alcohol)‐based support materials for the immobilization of glucose oxidase

BACKGROUND: The performances of four types of glucose oxidase (GOD) immobilization materials based on poly(vinyl alcohol) (PVA) were compared. The matrices of interest were chemically‐linked PVA, freeze‐thawed PVA cryogel, tetramethoxysilane (TMOS) sol‐gel‐PVA hybrid material, and alumina sol‐gel‐PVA hybrid material. RESULTS: Overall, the membranes showed good sensitivity except for the chemically cross‐linked PVA. However, the main differences with the enzyme immobilization methods were enzyme leakage and values of K_m^app. CONCLUSION: Freeze‐thawed PVA‐GOD membranes and TMOS‐PVA, which showed satisfactory sensitivity and adequate value of K_m^app, were quite promising as support materials for immobilizing GOD. Copyright © 2007 Society of Chemical Industry     

Poly(ether sulfone) supported hybrid poly(vinyl alcohol)–maleic acid–silicone dioxide membranes for the pervaporation separation of ethanol–water mixtures

Microporous poly(ether sulfone) (PES) supported hybrid polymer–inorganic membranes were prepared by the crosslinking of poly(vinyl alcohol) (PVA), maleic acid (MA), and SiO₂ via an aqueous sol–gel route and a solution‐casting method. The membrane performance was tested for the pervaporation separation of ethanol–water mixtures from 20 to 60 °C with a feed ethanol concentration of 96 wt %. The membrane characterization results reveal that different SiO₂ loadings affected the crystallinity and roughness of the membranes. The PVA–MA–SiO₂ membrane containing 10 wt % SiO₂ showed that SiO₂ nanoparticles were well dispersed within the polymer matrix; this resulted in significant enhancements in both the flux and selectivity. The membrane achieved a high water permeability of 1202 g·μm·m^?2 h^?1 kPa^?1 and a selectivity of 1027 for the separation of a 96 wt % ethanol‐containing aqueous solution. This enhanced membrane performance might have been due to the dense crosslinking membrane network, increased free volume, and uniform distribution of SiO₂ nanoparticles. Both the water and ethanol fluxes increased with the feed water concentration and temperature. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44839.     

Proton‐conducting blend membranes of crosslinked poly(vinyl alcohol)–sulfosuccinic acid ester and poly(1‐vinyl‐1,2,4‐triazole) for high temperature fuel cells

New type of composite membranes were synthesized by crosslinking of poly(vinyl alcohol) (PVA) with sulfosuccinic acid (SSA) and intercalating poly(1‐vinyl‐1,2,4‐triazole) (PVTri) into the resulting matrix. The complexed structure of the membranes was confirmed by Fourier transform infrared (FTIR) spectroscopy. The resulting hybrid membranes were transparent, flexible, and showed good thermal stability up to ～200°C. The proton conductivities of the membranes were investigated as a function of PVTri and SSA and operating temperature. The water/methanol uptake was measured and the results showed that solvent absorption of the materials increased with increasing PVTri content in the matrix. The proton conductivity of the membranes continuously increased with increasing SO₃H content, PVTri content, and the temperature. In the anhydrous state, the maximum proton conductivity is 7.7 × 10^?5 S/cm for PVA–SSA–PVTri‐1 and for PVA–SSA–PVTri‐3 is 1.6 × 10^?5 S/cm at 150°C. After humidification (RH = 100%), PVA–SSA–PVTri‐4 showed a maximum proton conductivity of 0.0028 S/cm at 60°C. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Poly(vinyl alcohol)–polyacrylamide blends with cesium salts of heteropolyacid as a polymer electrolyte for direct methanol fuel cell applications

A class of inorganic–organic hybrid membranes with low methanol permeability characteristics for possible direct methanol fuel cell (DMFC) applications was architected, formulated, and fabricated through the blending of poly(vinyl alcohol) (PVA) and polyacrylamide (PAM) followed by crosslinking with glutaraldehyde (Glu). Cesium salts of different heteropolyacids, including phosphomolybdic acid (PMA), phosphotungstic acid (PWA), and silicotungstic acid (SWA), were incorporated into the polymer network to form corresponding hybrid membrane materials, namely, PVA–PAM–CsPMA–Glu, PVA–PAM–CsPWA–Glu, and PVA–PAM–CsSWA–Glu, respectively (where “Cs” together with a heteropolyacid abbreviation indicates the cesium salt of that acid). All the three hybrid polymer membranes fabricated exhibited excellent swelling, thermal, oxidative, and additive stability properties with desired proton conductivities in the range 10^?2 S/cm at 50% relative humidity. A dense network formation was achieved through the blending of PVA and PAM and by crosslinking with Glu, which led to an order of magnitude decrease in the methanol permeability compared to the state‐of‐the‐art commercial Nafion 115 membrane. The hybrid membrane containing CsSWA exhibited a very low methanol permeability (1.4 × 10^?8 cm²/s) compared to other membranes containing cesium salt of heteropolyacids such as PMA and PWA. The feasibility of these hybrid membranes as proton‐conducting electrolytes in DMFC was investigated, and the preliminary results were compared with those of Nafion 115. The results illustrate the attractive features and suitability of the fabricated hybrid membranes as an electrolyte for DMFC applications. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation of water‐swollen hydrogel membranes for gas separation

Water‐swollen hydrogel (WSH) membranes for gas separation were prepared by the dip‐coating of asymmetric porous polyetherimide (PEI) membrane supports with poly(vinyl alcohol) (PVA)–glutaraldehyde (GA), followed by the crosslinking of the active layer by a solution method. Crosslinked PVA/GA film of different blend compositions (PVA/GA = 1/0.04, 0.06, 0.08, 0.10, 0.12 mol %) were characterized by differential scanning calorimetry (DSC) and their water‐swelling ratio. The swelling behavior of PVA/GA films of different blend compositions was dependent on the crosslinking density and chemical functional groups created by the reaction between PVA and GA, such as the acetal group, ether linkage, and unreacted pendent aldehydes in PVA. The permeation performances of the membranes swollen by the water vapor contained in a feed gas were investigated. The behavior of gas permeation through a WSH membrane was parallel to the swelling behavior of the PVA/GA film in water. The permeation rate of carbon dioxide through the WSH membranes was 10⁵ (cm³ cm^?2 s^?1 cmHg) and a CO₂/N₂ separation factor was about 80 at room temperature. The effect of the additive (potassium bicarbonate, KHCO₃) and catalyst (sodium arsenite, NaASO₂) on the permeation of gases through these WSH membranes was also studied. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1785–1791, 2001     

Optimizing the incorporation of silica nanoparticles in polysulfone/poly(vinyl alcohol) membranes with response surface methodology

The addition of silica nanoparticles and poly(vinyl alcohol) (PVA) to polysulfone (PSF) membranes was used to modify the membrane morphology and enhance membrane performance. The central composite design of the response surface methodology was used to predict the maximum permeability and real salt rejection (R_real) of the PSF membranes. The factors affecting the permeability and R_real values of the PSF membranes were the silica (0–12 wt % PSF) and PVA (0–2 wt % PSF) contents. The optimized responses, membrane permeability, and R_real obtained experimentally were 61.9260 L m⁻² h⁻¹ bar⁻¹ and 97.5850%, respectively, with deviation from the predicted values of 34.72 and 15.84%, respectively. In the further characterization, the contact angle results showed that PVA was important in stabilizing the nanoparticle surfaces to prevent agglomeration in the polymeric matrix. The tensile strength test confirmed that the addition of silica nanoparticles improved the mechanical strength of the PSF membranes. However, the addition of PVA had a weakening effect on the mechanical strength of the PSF membranes. The addition of silica nanoparticles and PVA affected the typical asymmetric structures of the PSF membrane less, as shown in the scanning electron micrographs. This may have been due to the good incorporation of additives in the PSF membranes, as observed from the energy‐dispersive X‐ray and Fourier transform infrared spectroscopy results. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011 Liver Transpl, 2011. © 2011 AASLD.     

Fabrication of efficient pervaporation desalination membrane by reinforcement of poly(vinyl alcohol)–silica film on porous polysulfone hollow fiber

Pervaporation membrane technology is commercially successful in the dehydration of organic solvents, and the technology has potential for seawater desalination with high recovery because of its capability to treat highly saline water. But to make the technology advantageous over the other available membrane desalination technologies in terms of productivity flux without additional energy cost, the selective barrier layer is required to be extremely thin, defect‐free, hydrophilic, and selective to water. In this work, we prepared an efficient membrane by reinforcing a highly water‐permeable but continuous barrier layer of poly(vinyl alcohol)–silica (PVA‐SiO₂) hybrid material on porous polysulfone hollow fibers. The PVA‐SiO₂ in acidified and hydrated ethanol was aged at room temperature for a period to allow solvent evaporation to obtain the solution concentration desired for the reinforcement. The reinforced hollow fiber membrane with optimal PVA‐SiO₂ barrier layer thickness exhibited a performance with a flux of 20.6 L m^?2 h^?1 and 99.9% salt rejection from a saline feed of 2000 ppm NaCl at 333 K. The effects of PVA‐SiO₂, temperature, and feed salinity on the pervaporation performance of the membrane were also studied. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45718.     

Photoconductivity of poly(vinyl alcohol) films with Fe3+ complexes and ESR study of their structures

We have studied whether photoconductivity is observed in polymer films containing the first transition metal complexes. Polymers investigated were poly(vinyl alcohol) (PVA), polyacrylamide, poly(acrylic acid), poly(vinyl pyrrolidone), and polyethylene glycol. Transition metal salts used were CrCl₃, MnCl₂, FeCl₃, CoCl₂, NiCl₂, FeBr₃, Fe(NO₃)₃, Fe₂(SO₄)₃, and Fe(ClO₄)₃. Only in the PVA–FeCl₃ film was relatively large photoconductivity due to the photoreduction of Fe³⁺ observed. ESR spectra indicate that an Fe³⁺ ion is chelated with two in-plane OH residues of PVA and coordinated with three Cl^?ions on the meridian. UV irradiation causes an electron transfer from Cl^? to Fe³⁺. The produced chlorine atom extracts an electron from the oxygen of a neighboring OH residue. The unpaired electron thus formed can move from one oxygen to another through hydrogen bonding. In other words, the photoconductivity is due to holes produced in the network of PVA hydrogen bonding by the reduction of Fe³⁺. Finally, we have tried to explain why the photoconductivity is observed only in the PVA–FeCl₃ film.     

Polysulfone‐based composite membranes with functionalized carbon nanotubes show controlled porosity and enhanced electrical conductivity

Composite membranes of functionalized (–COOH, –CONH₂, –N₃) carbon nanotubes/polysulfone (CNT/PS) synthesized by the phase‐inversion method show unique properties with respect to surface characteristics and the selective separation of metal ions from aqueous solution. Apart from the reduction in the pore size depending on the type of functionalities on the nanotubes, the pure water permeation could reach up to as high as ～600 L m^?2 h^?1 (LMH) at reduced pressures and could be due to the functionalized tips of the nanotubes on the membrane surface resulting from the phase inversion process used for the membrane fabrication. The membranes were characterized by small angle neutron scattering (SANS) to confirm the uniform distribution of the nanopores and the surface morphology of the membranes. Results show that rejection of Cu(II) was better than Pb(II) depending on the surface functionality. Interestingly, these membranes also showed enhanced conductivities in the range of 1.0 × 10^?2 S cm^?1, the conductivity depending on the type of functionality on the nanotubes, thus confirming the presence of functionalized nanotubes tips on the membrane surface. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43778.     

Crosslinked hydroxyl‐conductive copolymer/silica composite membranes based on addition‐type polynorbornene for alkaline anion exchange membrane fuel cell applications

Crosslinked hydroxyl‐conductive copolymer/silica composite membranes based on addition‐type polynorbornene, poly(dodoxymethylene norbornene‐co‐norbornene‐3‐(trimethylpropyl ammonium)‐functionalized silica (QP(DNB/NB‐SiO₂), were prepared by a sol–gel method. Copolymer composite membranes with different degree of quaternary ammonium functional silica, designated as QP(DNB/NB‐SiO₂‐X) (X = 5, 10, 15 and 25 wt%, respectively), displayed good dimensional stabilities with low in‐plane swelling rate of 1.32–3.7%, good mechanical properties with high elastic modulus of 605.4–756.8 MPa and high tensile strength of 13.2–20 Mpa. The achieved copolymer composite membranes could self‐assemble into a microphase‐separated morphology with randomly oriented long‐range aliphatic chain/cylinder ionic channels that were imbedded in the hydrophobic PNB matrix. Among these membranes, the QP(DNB/NB‐SiO₂‐25) showed the parameter with ionic conductivity of 9.33 × 10^?3S cm^?1, methanol permeability of 2.89 × 10^?7cm² s^?1, and ion‐exchange capacity(IEC) of 1.19 × 10^?3 mol g^?1. A current density of 82.3mA cm^?2, the open circuit voltage of 0.65 V and a peek power density of 32 mW cm^?2 were obtained. POLYM. ENG. SCI., 58:13–21, 2018. © 2017 Society of Plastics Engineers     

Rheological properties of high molecular weight (HMW) syndiotactic poly(vinyl alcohol) (PVA)/HMW atactic PVA blend solutions

To identify the effect of blend ratios of syndiotacticity‐rich poly(vinyl alcohol) (s‐PVA)/atactic PVA (a‐PVA) having similar number‐average degrees of polymerization (P_n)s of 4000 and degrees of saponification (DS)s of 99.9% on the rheological properties of s‐PVA/a‐PVA/water solutions, water‐soluble s‐PVA and a‐PVA with different syndiotactic diad contents of 58.5 and 54.0%, respectively, were prepared by bulk copolymerization of vinyl pivalate and vinyl acetate (VAc) and solution polymerization of VAc, followed by saponifying the corresponding copoly(vinyl pivalate/vinyl acetate) and poly(vinyl acetate). The blend ratios played a significant role in rheological behavior. Over the frequency range of 10^?1–10² rad/s, s‐PVA/a‐PVA blend solutions with larger s‐PVA content show more shear thinning at similar (P_n)s and (DS)s of polymer, suggesting that PVA molecules are more readily oriented as s‐PVA content increases. Yield stress is higher for s‐PVA/a‐PVA blend solutions with larger s‐PVA content at similar (P_n)s and (DS)s of polymer. This indicates that more domains with internal order are produced at larger s‐PVA content in s‐PVA/a‐PVA blend solutions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3934–3939, 2006     

Fumed SiO2 nanoparticle reinforced biopolymer blend nanocomposites with high dielectric constant and low dielectric loss for flexible organic electronics

In the present study, fumed silica (SiO₂) nanoparticle reinforced poly(vinyl alcohol) (PVA) and poly(vinylpyrrolidone) (PVP) blend nanocomposite films were prepared via a simple solution‐blending technique. Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible spectroscopy (UV–vis), X‐ray diffraction (XRD), and scanning electron microscopy (SEM) were employed to elucidate the successful incorporation of SiO₂ nanoparticles in the PVA/PVP blend matrix. A thermogravimetric analyzer was used to evaluate the thermal stability of the nanocomposites. The dielectric properties such as dielectric constant (?) and dielectric loss (tan δ) of the PVA/PVP/SiO₂ nanocomposite films were evaluated in the broadband frequency range of 10^?2 Hz to 20 MHz and for temperatures in the range 40–150 °C. The FTIR and UV–vis spectroscopy results implied the presence of hydrogen bonding interaction between SiO₂ and the PVA/PVP blend matrix. The XRD and SEM results revealed that SiO₂ nanoparticles were uniformly dispersed in the PVA/PVP blend matrix. The dielectric property analysis revealed that the dielectric constant values of the nanocomposites are higher than those of PVA/PVP blends. The maximum dielectric constant and the dielectric loss were 125 (10^?2 Hz, 150 °C) and 1.1 (10^?2 Hz, 70 °C), respectively, for PVA/PVP/SiO₂ nanocomposites with 25 wt % SiO₂ content. These results enable the preparation of dielectric nanocomposites using a facile solution‐casting method that exhibit the desirable dielectric performance for flexible organic electronics. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44427.     

Pervaporation characteristics and structure of poly(vinyl alcohol)/poly(ethylene glycol)/tetraethoxysilane hybrid membranes

Poly(vinyl alcohol) (PVA) blended with poly(ethylene glycol) (PEG) was crosslinked with tetraethoxysilane (TEOS) to prepare organic–inorganic PVA/PEG/TEOS hybrid membranes. The membranes were then used for the dehydration of ethanol by pervaporation (PV). The physicochemical structure of the hybrid membranes was studied with Fourier transform infrared spectra (FT‐IR), wide‐angle X‐ray diffraction WXRD, and scanning electron microscopy (SEM). PVA and PEG were crosslinked with TEOS, and the crosslinking density increased with increases in the TEOS content, annealing temperature, and time. The water permselectivity of the hybrid membranes increased with increasing annealing temperature or time; however, the permeation fluxes decreased at the same time. SEM pictures showed that phase separation took place in the hybrid membranes when the TEOS content was greater than 15 wt %. The water permselectivity increased with the addition of TEOS and reached the maximum at 10 wt % TEOS. The water permselectivity decreased, whereas the permeation flux increased, with an increase in the feed water content or feed temperature. The hybrid membrane that was annealed at 130°C for 12 h exhibited high permselectivity with a separation factor of 300 and a permeation flux of 0.046 kg m^?2 h^?1 in PV of 15 wt % water in ethanol. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis,antimicrobial activity,and release of tetracycline hydrochloride loaded poly(vinyl alcohol)/soybean protein isolate/zirconium dioxide nanofibrous membranes

Tetracycline hydrochloride loaded poly(vinyl alcohol)/soybean protein isolate/zirconium (Tet–PVA/SPI/ZrO₂) nanofibrous membranes were fabricated via an electrospinning technique. The average diameter of the PVA/soybean protein isolate (SPI)/ZrO₂ nanofibers used as drug carriers increased with increasing ZrO₂ content, and the nanofibers were uneven and tended to stick together when the ZrO₂ content was above 15 wt %. The Tet–PVA/SPI/ZrO₂ nanofibers were similar in morphology when the loading dosage of the model drug tetracycline hydrochloride was below 6 wt %. The PVA, SPI, and ZrO₂ units were linked by hydrogen bonds in the hybrid networks, and the addition of ZrO₂ improved the thermostability of the polymer matrix. The Tet–PVA/SPI/ZrO₂ nanofibrous membranes exhibited good controlled drug‐release properties and antimicrobial activity against Staphylococcus aureus. The results of this study suggest that those nanofibrous membranes were suitable for drug delivery and wound dressing. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40903.     

Conductivities and thermal studies of polymeric electrolytes based on poly(epichlorohydrin)/sodium salts

The halogenated polyether named Hydrin-T® is a terpolymer constituted of epichlorohydrin-ethylene oxide-allyl glycidyl ether. It was studied as a polymeric electrolyte in polymer/NaX systems (X = Br^?, I^?, SCN^?, ClO₄^? and B(C₆H₅)₄^?). In this work we present an investigation of the ionic conductivity (measured by impedance spectroscopy) and thermal properties (measured by differential scanning calorimetry–DSC, modulated DSC and thermogravimetry) of the polymeric electrolyte as a function of the composition in the range of 5 to 40 m/m(%) of the sodium salt. The solubility of sodium salts in the elastomer terpolymer matrix is comparable to the solubility in the best known matrix of linear semicrystalline PEO. The conductivities of the terpolymer/NaI electrolytes are higher than those of membranes prepared with other salts studied (10^?5 S/cm for the former versus 10^?7 to 10^?6 S/cm for the latter). This system also is the most homogeneous up to 40 m/m (%) and showed the smallest increase of T_g values as a function of salt concentration [between -53°C for the pure polymer and -35°C for the 40 m/m (%) of NaI]. Modulated DSC confirmed the homogeneity of the terpolymer/NaI system showing T_g transition in a range of only 5°C. A decrease of variation of heat capacity during glass transition with the increase of salt concentration was observed.     

Rheological and rheo-optical properties of high molecular weight syndiotactic and atactic polyvinylalcohol solutions

The rheological and rheo-optical properties of solutions of high molecular weight polyvinylalcohol (PVA) with different syndiotactic diad contents in dimethylsulfoxide (DMSO) were investigated in terms of tacticity, molecular weight, and degree of saponification. Tacticity played a significant role in rheological behavior. Over the frequency range of 10^?1 to 10² rad/s PVA with syndiotactic diad content of ～53% (atactic PVA) exhibited almost Newtonian flow behavior whereas PVA with syndiotactic diad content of ～63% (syndiotactic PVA) exhibited Bingham flow behavior. On the plot of storage modulus (G′) against loss modulus (G″) atactic PVA gave slopes of ～2 while syndiotactic PVA gave slopes of ～1. With syndiotactic PVA, an increase of shear rate notably increased flow birefringence (Δn_f) at shear rates higher than 5 sec^?1. On the other hand, only a slight increase in Δn_f was observed in the case of atactic PVA. The effects of molecular weight and degree of saponification were discussed as well.     

Evaluation and fabrication of pore‐size‐tuned silica membranes with tetraethoxydimethyl disiloxane for gas separation

Organic/inorganic hybrid silica membranes were prepared from 1,1,3,3‐tetraethoxy‐1,3‐dimethyl disiloxane (TEDMDS) by the sol‐gel technique with firing at 300–550°C in N₂. TEDMDS‐derived silica membranes showed high H₂ permeance (0.3–1.1 × 10^?6 mol m^?2 s^?1 Pa^?1) with low H₂/N₂ (～10) and high H₂/SF₆ (～1200) perm‐selectivity, confirming successful tuning of micropore sizes larger than TEOS‐derived silica membranes. TEDMDS‐derived silica membranes prepared at 550°C in N₂ increased gas permeances as well as pore sizes after air exposure at 450°C. TEDMDS had an advantage in tuning pore size by the “template” and “spacer” techniques, due to the pyrolysis of methyl groups in air and Si? O? Si bonding, respectively. For pore size evaluation of microporous membranes, normalized Knudsen‐based permeance, which was proposed based on the gas translation model and verified with permeance of zeolite membranes, reveals that pore sizes of TEDMDS membranes were successfully tuned in the range of 0.6–1.0 nm. © 2011 American Institute of Chemical Engineers AIChE J, 2011