聚砜/改性碳纳米管复合膜的制备及亲水性能

利用浸没沉淀相转化法,以聚砜(PSF)为膜材料,羧基化碳纳米管(MWCNTs-COOH)为添加剂,聚乙烯吡咯烷酮(PVP)为致孔剂,N,N-二甲基乙酰胺(DMAc)为溶剂,制备了聚砜/多壁碳纳米管复合膜,系统研究了制备复合膜时碳纳米管的添加量、预挥发时间以及凝固浴组成对其结构和性能的影响。实验结果表明,添加MWCNTs-COOH后,复合膜的亲水性能和抗污性能显著提高,同时复合膜的力学性能也明显增强。复合膜的 SEM 照片显示,随预挥发时间的延长和凝固浴中DMAc 质量分数的增加,复合膜断面由指状孔结构向海绵状孔结构过渡;复合膜的水通量下降,截留率上升。     

Preparation of DNA-encapsulated polyethersulfone hollow microspheres for organic compounds and heavy metal ions removal

DNA-encapsulated polyethersulfone (PES) hollow microspheres are fabricated by means of a liquid-liquid phase separation technique; the hollow microspheres are then used to remove environmental pollutant organic compounds and heavy metal ions. The amounts of DNA encapsulated in the microspheres are dependent on the PES concentration, the DNA concentration used to prepare the particles, and the diameter of the syringe needle. The hollow microspheres can be used to remove harmful organic compounds including ethidium bromide (EB), acridine orange (AO) and endocrine disruptors. With the increase of the DNA amount encapsulated into the hollow microspheres, the removal ratios of these compounds increased. Additionally, the DNA-encapsulated PES hollow microspheres can selectively accumulate and remove heavy metal ions such as Ag⁺, Cu²⁺ and Zn²⁺ These results suggested that the DNA-encapsulated PES hollow microspheres have a potential to be used in environmental applications.     

Synthesis of cellulose/reduced graphene oxide/polyaniline nanocomposite and its properties

A series of conductive nanocomposites cellulose/reduced graphene oxide/polyaniline (cellulose/RGO/PANi) were synthesized via in situ oxidative polymerization of aniline on cellulose/RGO with different RGO loading to study the effect of RGO on the properties of nanocomposites. The results showed that when RGO is inserted into cellulose/PANi structure, its thermal stability and conductivity are increased. So that adding of only 0.3 wt% RGO into the cellulose/PANi structure, its conductivity is increased from 1.1 × 1 10^?1 to 5.2 × 110^?1 S/cm. Scanning electron microscopy results showed that the PANi nanoparticles are formed a continuous spherical shape over the cellulose/RGO template; this increases the thermal stability of nanocomposite.     

Effect of adding other metal ions on the removal of Cd2+ by the CoAlPO4‐5/polysulfone membrane

Based on our previous work, performance of separation of Cd²⁺ by the CoAlPO₄‐5/polysulfone membrane was not as good as that of the other metal ions. This could be significantly improved by the addition of other metal ions into the Cd²⁺ solution. The metal ions added were those with larger hydrated radius than that of Cd²⁺. When Mg²⁺ and Ca²⁺ were added, the rejection rate of Cd²⁺ could be increased from about 50% ([Cd²⁺] = 50 ppm) to nearly 100% and the rate would increase with concentration of Mg²⁺ and Ca²⁺. However, when the added ions were Fe²⁺ and Mn²⁺, although the performance of Cd²⁺ removal was still high, the rejection rate would inversely decrease with increasing concentration of Fe²⁺ and Mn²⁺. These phenomena were mainly attributable to the effect of hydrated ion and the effect of lowered pH value induced by the hydrolysis of the solution. As to the addition of Al³⁺, although the rejection rate would decrease with increasing Al³⁺ concentration up to 100 ppm, an abrupt increase was observed at 150 ppm, which was thought to be attributable to the concentration polarization effect caused by the formation of the high valence [Al_n(OH)_m]^{(3[supi]n?[supi]m)+} complex. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2172–2177, 2002     

层状复合氢氧化物的结构调控及其吸附重金属离子的研究进展

层状复合氢氧化物（LDHs）是具有特殊层状结构的阴离子黏土,具有化学组成可调、比表面积大及结构记忆效应独特等性质,在废水处理方面备受关注。调控LDHs自身结构,是进一步扩大其应用范围、提高其吸附性能的有效途径。该文介绍了LDHs特殊的层状结构和其自身性质;总结了LDHs最常用的制备方法,即共沉淀法、离子交换法、尿素水解法、煅烧复原法和溶胶-凝胶法等,分别介绍了各种制备方法的原理和特点;综述了LDHs的结构调控对其吸附重金属离子性能的影响,并总结了LDHs对重金属离子的吸附机理;最后,指出了目前LDHs在处理含有重金属离子废水研究中面临的挑战,并对该材料未来的研究方向和发展趋势进行了展望。     

Synthesis of sulfhydryl chitin and its adsorption properties for heavy metal ions

This article discusses the preparation of the water‐insoluble adsorbent sulfhydryl chitin (s‐chitin), by treatment of the chitin with sulfhydryl acetic acid in the presence of sulfuric acid as a catalyst. Its structure was confirmed by elemental analysis, FTIR spectra analysis and near‐IR spectra analysis. We also investigated the adsorption properties of sulfhydryl chitin for Cu^II, Cd^II, Pb^II, Cr^III, and Ni^II. Based on the research results of adsorption capacity, the effect of pH value on adsorption, adsorption kinetics experiments, and selective adsorption experiments were observed. It has been shown that the s‐chitin has much better adsorption for Pb^II, Cu^II, and Cd^II than chitin itself. The adsorption capacities of s‐chitin for Pb^II, Cu^II, and Cd^II were 108.3, 94.7, and 57.1 mg/g, respectively. It also had good adsorption properties for heavy metal ions. The adsorption capacities were also affected by the acidity of medium. The adsorbed Cu^II, Cd^II, and Pb^II could be eluted by diluted chlorhydric acid. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 151–155, 2000     

Forward osmosis water desalination: Fabrication of graphene oxide-polyamide/polysulfone thin-film nanocomposite membrane with high water flux and low reverse salt diffusion

This paper investigates the synthesis of graphene oxide (GO)-incorporated polyamide thin-film nanocomposite (TFN) membranes on polysulfone substrate for forward osmosis applications. The GO nanosheets were embedded into polyamide layer using different concentrations (0.05?0.2 wt%). The results represented the alteration of polyamide surface by GO nanosheets and enhancing the surface hydrophilicity by increasing the GO loading. The results showed that the water flux for 0.1 wt% GO embedded nanocomposite (TFN) membrane was 34.7 L/m² h, representing 90% improvement compared to the thin-film composite, while the salt reverse diffusion was reduced up to 39%.     

Simultaneous removal of humic acid and heavy metal from aqueous solutions using charged ultrafiltration membranes

Lab-made negatively charged ultrafiltration (UF) membranes were used for simultaneous removal of humic acid (HA) and heavy metals from water. Effects of the HA/metal ratio, solution pH and ionic strength on rejection coefficients of HA and metals were investigated. The results showed that the rejection coefficients of both HA and metals increase with the increase of pH and the HA/metal ratio, and the decrease of ionic strength. This study indicated that charged UF could be an effective method for the simultaneous removal of HA and heavy metal harnessing the principle of complexation UF and electrostatic repulsion between the membrane and the HA–M complex of the same charges.     

Adsorption capacity and removal efficiency of heavy metal ions by Moso and Ma bamboo activated carbons

In order to understand the adsorption capacity and removal efficiency of heavy metal ions by Moso and Ma bamboo activated carbons, the carbon yield, specific surface area, micropore area, zeta potential, and the effects of pH value, soaking time and dosage of bamboo activated carbon were investigated in this study. In comparison with once-activated bamboo carbons, lower carbon yields, larger specific surface area and micropore volume were found for the twice-activated bamboo carbons. The optimum pH values for adsorption capacity and removal efficiency of heavy metal ions were 5.81–7.86 and 7.10–9.82 by Moso and Ma bamboo activated carbons, respectively. The optimum soaking time was 2–4 h for Pb²⁺, 4–8 h for Cu²⁺ and Cd²⁺, and 4 h for Cr³⁺ by Moso bamboo activated carbons, and 1 h for the tested heavy metal ions by Ma bamboo activated carbons. The adsorption capacity and removal efficiency of heavy metal ions of the various bamboo activated carbons decreased in the order: twice-activated Ma bamboo carbons > once-activated Ma bamboo carbons > twice-activated Moso bamboo carbons > once-activated Moso bamboo carbons. The Ma bamboo activated carbons had a lower zeta potential and effectively attracted positively charged metal ions. The removal efficiency of heavy metal ions by the various bamboo activated carbons decreased in the order: Pb²⁺ > Cu²⁺ > Cr³⁺ > Cd²⁺.     

用酵母菌吸附处理废水中重金属离子研究现状

酵母菌作为一种生物吸附剂,廉价易得,对重金属、低pH及其它外界条件有较强的耐受度.利用酵母菌,特别是固定化酵母菌吸附废水中的重金属离子,不仅成本低、去除率高、再生能力强,而且对吸附的重金属易于回收.随着相关技术的发展,酵母菌吸附剂必将在废水处理中得到更广泛的应用.     

Sorption of heavy metal ions from aqueous solutions in the presence of EDTA on monodisperse anion exchangers

Conventional precipitation methods of industrial sewage and wastewater purification are not very effective and are insufficient in many cases. This implies the necessity of searching new, effective methods exploiting cheap, accessible and ecologically safe ion exchangers and sorbents. The paper presents the studies on removal of heavy metal ions — Cu(II), Zn(II), Co(II), Ni(II) and Fe(III) — from aqueous solutions in the presence of EDTA carried out on commercially available, strongly basic monodisperse anion exchangers with the polystyrene skeleton gel, Lewatit MonoPlus M 500; and the macroporous, Lewatit MonoPlus MP 500, which are more widely applied in water purification processes. The research results indicate a high affinity of the Lewatit MonoPlus M 500 and Lewatit MonoPlus MP 500 anion exchangers in the chloride form for copper(II), nickel(II), cobalt(II) and zinc(II) complexes with EDTA. The affinity series for the heavy metal complexes in the 0.001 M M(II)/(III)–0.001 M EDTA and 0.001 M M(II)/(III)–0.001M EDTA–0.001 M–0.002 M NaOH systems were found for the Lewatit MonoPlus M 500 anion exchanger in the chloride form to be as follows: Cu(II) > Ni(II) > Co(II) > Zn(II) Fe(III). In the case of the Lewatit MonoPlus MP 500 anion exchanger in the chloride form there was found the following affinity series: Cu(II) > Co(II) > Ni(II) > Zn(II) Fe(III). These anion exchangers can be applied in the removal of copper(II) complexes from waters and wastewaters.     

On the structural and optical properties of gold–polyaniline nanocomposite synthesized via a novel route

Gold nanoparticle embedded polyaniline (PANI) was synthesized by in situ oxidative polymerization of monomer aniline. X‐ray diffraction and Fourier transform IR techniques were used to establish the structure of the gold–PANI composite. UV–visible absorption studies have shown that, along with the normal absorption peak of polyaniline, the composite has an absorption peak characterized by surface plasmon resonance. The presence of surface plasmon resonance is a signature of the nano size of the gold particles embedded in the PANI. Energy‐dispersive X‐ray spectroscopy (EDS) has revealed the elemental composition of the composite sample quantitatively. Raman spectroscopy studies have strengthened the presence of plasmon resonance. Single‐beam Z‐scan results confirm the third‐order optical nonlinearity associated with the nanocomposite. The present investigations show that gold nanoparticle embedded PANI composite can be of potential application in the fields of both linear and nonlinear optics. Copyright © 2012 Society of Chemical Industry     

Preparation of polysulfonebenzylthiourea-reactive ultrafiltration plate membranes and their rejection properties for heavy toxic metal cations

The asymmetric membranes were prepared via phase inversion method, by using chloromethyl polysulfone as membrane materials, polyethylene glycol (PEG) as pore forming agent to improve the morphology and function of resultant membranes, N,N-dimethylacetamide as solvent, and water as the extraction solvent. Then the highly qualified polysulfonebenzylthiourea-reactive ultrafiltration plate membrane was prepared successively through the reactions between the chloromethyl polysulfone matrix membrane and thiourea. The thiourea-functionalized polysulfone plate reactive ultrafiltration membrane was used for the rejection of heavy toxic metal cations such as Cd²⁺ and Zn²⁺ through the coordination of the thiourea group and heavy toxic metal cations, in which the effects of the morphological and the structure of the membrane on the rejection properties were investigated. The rejection conditions, including the concentration of heavy toxic metal cations, temperature and pH of the solution had significant effects on the rejection capacity of polysulfonebenzylthiourea-reactive ultrafiltration membrane. The reactive ultrafiltration membrane containing thiourea group can be conveniently recovered by dilute hydrochloric acid for coordination of heavy toxic metal cations, which would have wide application for the treatment of waste-water-containing heavy toxic metal cations. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Performance evaluation of modified fabricated cotton membrane for oil/water separation and heavy metal ions removal

Preparation of effective membrane with special surface treatment for oil/water separation having promising future and low manufacturing cost. The suggested membrane was fabricated by a simple treatment via increasing the hydrophilicity of the cotton fabric surface. The cotton fabric was impregnated in poly(acrylic acid-co-N-methylol acrylamide), poly(AA-co-NMA), where NMA acts as bonding agent. Sodium hypophosphite (SHP) was added to the modification solution to enhance the bonding between the cotton fabric and the PAA. The modified fabric was thermally dried and cured at different temperatures. It was found that, the presence of 3.5% NMA and addition of 5% SHP to the modification solution then curing at 190°C gave the highest amount of bonded PAA to the cotton fabric. The success of the modification process was confirmed by scanning electron microscope, Fourier transformer infrared and the increase in the contact angle of the cotton fabric after modification. Furthermore, the prepared membrane was evaluated for oil (n-hexane, toluene, and petroleum ether)/water separation and also for heavy metal ions removal (Cd²⁺ and Co²⁺). Neutralization of the produced membrane with ammonium hydroxide resulting in a higher contact angle and consequently higher separation efficiency for oil/water mixtures and higher performance for heavy metal ions removal compared to the unneutralized one.     

PVA cryogel membranes as a promising tool for the retention and separation of metal ions from aqueous solutions

The sorption and transport of metal ions by poly(vinyl alcohol) hydrogel membranes (PVA HG), obtained by physical crosslinking through the freezing/thawing method, was analyzed using aqueous nitrate solutions of copper, lead, and nickel, at concentrations ranging from 1 to 100 mM, at 25°C. The sorption of heavy metal by PVA HG has been characterized by swelling and loading degrees. The effect of the heavy metals incorporation on the chemical properties of PVA HG matrices has been studied using SEM, to observe changes in the surface morphology of PVA HG membranes, and FTIR–ATR, aiming to monitor the heavy metals ions sorption into PVA hydrogel membranes. The analysis of permeation and diffusion coefficients of 100 mM aqueous solutions of Cu²⁺, Ni²⁺, and Pb²⁺ show that the diffusion process may be mainly described by hydrodynamic models; however, the transport process shows that the distribution coefficient for the different heavy metals are always higher than one, in agreement, with the sorption studies. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Influence of nanoclay and coupling agent on the physical and mechanical properties of polypropylene/bagasse nanocomposite

In this work, the effects of nanoclay (1–4 wt %) and coupling agent (2 and 4 wt %) loading on the physical and mechanical properties of nanocomposites are investigated. Composites based on polypropylene (PP), bagasse flour, and nanoclay (montmorillonite type) was made by melt compounding and then compression molding. When 1–3 wt % nanoclay was added, the tensile properties increased significantly, but then decreased slightly as the nanoclay content increased to 4%. The impact strength was 6% lower by the addition of 1 wt % nanoclay, it was decreased further when the nanoclay content increased from 1 to 4%. Finally, the water absorption of PP/bagasse composites was lowered with the increase in nanoclay content. Additionally, the coupling agent, 4 wt % MAPP, improved the mechanical and physical properties of the composites more than the 2 wt % MAPP. From these results, we can conclude that addition of nanoclay enables to achieve better physical and mechanical properties in conventional composites. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

A comparative study of the preparation and physical properties of polystyrene–silica mesocomposite and nanocomposite materials

In this paper, a comparative study with regard to the preparation and physical properties of as‐prepared polystyrene–silica mesocomposite (PSM) and polystyrene‐silica nanocomposite (PSN) materials is presented. Vinyl‐modified mesoporous silica particles with a wormhole structure were first prepared by doping a sol‐gel metal oxide with an optically active non‐surfactant (dibenzoyl‐L ‐tartaric acid) as a template, followed by template removal through Soxhlet extraction. The as‐prepared silica particles with/without mesopores were subsequently characterized using the Brunauer–Emmett–Teller method and transmission electron microscopy (TEM) and Fourier transform infrared, ¹³C NMR and ²⁹Si NMR solid‐state spectroscopy. A specific feed amount of silica particles was subsequently reacted with styrene monomer by free radical polymerization to yield a series of PSM and corresponding PSN materials. Both as‐prepared composite systems were further characterized using TEM and scanning electron microscopy/energy‐dispersive X‐ray mapping studies. A systematic comparative study of the physical properties of both as‐prepared composite materials clearly illustrated that PSM had effectively enhanced thermal stability, optical clarity and dielectric properties compared to the corresponding PSN counterpart. Evaluation was carried out using thermogravimetric analysis, differential scanning calorimetry, UV‐visible transmission spectroscopy and dielectric constant measurements. Copyright © 2011 Society of Chemical Industry     

Effect of different titania phases on the hydrogen gas sensing features of polyaniline/TiO2 nanocomposite

This paper presents a resistance-based hydrogen gas sensor using polyaniline (emeraldine)/TiO₂ nanocomposite (PT–NC) thin film. It is demonstrated that different gas sensing features can arise when various TiO₂ phases (anatase and rutile) are applied. The different wt% of TiO₂ phases were dispersed into an acidic solution of aniline monomers and PT–NCs were synthesized by an in-situ self-assembly chemical oxidative polymerization method of aniline. PT–NCs deposited on an epoxy glass substrate having Cu-interdigited electrodes for hydrogen gas sensing at air pressure and room temperature. Our results show that the better sensitivity of the sensor strongly depends on the sensor surface morphology and its components. Furthermore, hydrogen gas sensing mechanism of the sensor based contact areas between Pani chains and TiO₂ grains was studied.     

丙烯酸-丙烯酰胺共聚物的制备及其重金属离子敏感性研究

以部分中和的丙烯酸、丙烯酰胺为单体,过硫酸钾为引发剂,N,N’-亚甲基双丙烯酰胺为交联剂,采用溶液聚合法直接合成出了一系列不同配方的丙烯酸-丙烯酰胺共聚物(PAAAM)。根据其在氯化钠溶液和在氯化铬、硫酸铜溶液中的溶胀度曲线斜率的显著不同,表明此共聚物对重金属离子较为敏感。结果表明,丙烯酰胺配比为40%,丙烯酸中和度为60%,引发剂用量为0.30%,交联剂用量为0.050%(百分比以丙烯酸为基准)条件下合成的PAAAM的重金属离子敏感性较好。