Multiphoton imaging with a novel compact diode‐pumped Ti:sapphire oscillator

Multiphoton laser scanning microscopy commonly relies on bulky and expensive femtosecond lasers. We integrated a novel minimal‐footprint Ti:sapphire oscillator, pumped by a frequency‐doubled distributed Bragg reflector tapered diode laser, into a clinical multiphoton tomograph and evaluated its imaging capability using different biological samples, i.e. cell monolayers, corneal tissue, and human skin. With the novel laser, the realization of very compact Ti:sapphire‐based systems for high‐quality multiphoton imaging at a significantly size and weight compared to current systems will become possible. Microsc. Res. Tech. 78:1154–1158, 2015. © 2015 Wiley Periodicals, Inc.     

Spectral properties and dynamics of gold nanorods revealed by EMCCD‐based spectral phasor method

Gold nanorods (NRs) with tunable plasmon‐resonant absorption in the near‐infrared region have considerable advantages over organic fluorophores as imaging agents due to their brightness and lack of photobleaching. However, the luminescence spectral properties of NRs have not been fully characterized at the single particle level due to lack of proper analytic tools. Here, we present a spectral phasor analysis method that allows investigations of NRs' spectra at single particle level showing the spectral variance and providing spatial information during imaging. The broad phasor distribution obtained by the spectral phasor analysis indicates that spectra of NRs are different from particle to particle. NRs with different spectra can be identified in images with high spectral resolution. The spectral behaviors of NRs under different imaging conditions, for example, different excitation powers and wavelengths, were revealed by our laser‐scanning multiphoton microscope using a high‐resolution spectrograph with imaging capability. Our results prove that the spectral phasor method is an easy and efficient tool in hyper‐spectral imaging analysis to unravel subtle changes of the emission spectrum. We applied this method to study the spectral dynamics of NRs during direct optical trapping and by optothermal trapping. Interestingly, different spectral shifts were observed in both trapping phenomena. Microsc. Res. Tech. 78:283–293, 2015. © 2015 Wiley Periodicals, Inc.     

Rapid single‐molecule imaging in cyclic olefin copolymer channels

Rapid preparation of high quality capture surfaces is a major challenge for surface‐based single‐molecule protein binding assays. Here we introduce a simple method to activate microfluidic chambers made from cyclic olefin copolymer for single‐molecule imaging with total internal reflection fluorescence microscopy. We describe a surface coating protocol and demonstrate single‐molecule imaging in off‐the‐shelf microfluidic parts that can be activated for binding assays within a few minutes. As the first example, biotinylated protein directly captured on the neutravidin‐coated surface was detected using fluorescently labeled antibody. We then showed detection of a fusion construct containing green fluorescence protein and verified its single fluorophore behavior by observing stepwise photobleaching events. Finally, a target protein was identified in the crude cell lysate using antibody–sandwich complex formation. In all experiments, controls were completed to ensure that nonspecific binding to the surface was minimal. Based on our results, we conclude that the simple surface preparation described in this paper enables single‐molecule imaging assays without time‐consuming coating procedures. Microsc. Res. Tech. 78:309–316, 2015. © 2015 Wiley Periodicals, Inc.     

In vivo second‐harmonic generation and ex vivo coherent anti‐stokes raman scattering microscopy to study the effect of obesity to fibroblast cell function using an Yb‐fiber laser‐based CARS extension unit

Nonlinear microscopy techniques are being increasingly used to perform in vivo studies in dermatology. These methods enable us to investigate the morphology and monitor the physiological process in the skin by the use of femtosecond lasers operating in the red, near‐infrared spectral range (680–1,300 nm). In this work we used two different techniques that require no labeling: second harmonic generation (SHG) for collagen detection and coherent anti‐Stokes Raman scattering (CARS) to assess lipid distribution in genetically obese murine skin. Obesity is one of the most serious public health problems due to its high and increasing prevalence and the associated risk of type 2 diabetes and cardiovascular diseases. Other than these diseases, nearly half of patients with diabetes mellitus suffer from dermatological complications such as delayed wound healing, foot ulcers and several other skin changes. In our experiment we investigated and followed the effects of obesity on dermal collagen alterations and adipocyte enlargement using a technique not reported in the literature so far. Our results indicate that the in vivo SHG and ex vivo CARS imaging technique might be an important tool for diagnosis of diabetes‐related skin disorders in the near future. Microsc. Res. Tech. 78:823–830, 2015. © 2015 Wiley Periodicals, Inc.     

Real‐time histological imaging of kidneys stained with food dyes using multiphoton microscopy

We have developed a real‐time imaging technique for diagnosis of kidney diseases which is composed of two steps, staining renal cells safely with food dyes and optical sectioning of living renal tissue to obtain histological images by multiphoton microscopy (MPM). Here, we demonstrated that the MPM imaging with food dyes, including erythrosine and indigo carmine, could be used as fluorescent agents to visualize renal functions and structures such as glomerular bloodstreams, glomerular filtration, and morphology of glomeruli and renal tubules. We also showed that the kidneys of IgA nephropathy model‐mice stained with the food dyes presented histopathological characteristics different from those observed in normal kidneys. The use of the food dyes enhances the quality of tissue images obtained by MPM and offers the potential to contribute to a clinical real‐time diagnosis of kidney diseases. Microsc. Res. Tech. 78:847–858, 2015. © 2015 Wiley Periodicals, Inc.     

High accuracy 4D cell tracking into explanted skin using two‐photon excitation microscopy

Two‐photon excitation microscopy (2PEM) analysis of large explanted organs is still laborious, principally because of tissue movements inducing lateral and axial drifts during extended imaging sessions. Here, we describe a two‐step approach to track motile T cells in murine dorsal explanted skin with the best accuracy. First, we compared various explanted skin mounting methods for 2PEM analysis to define the setup allowing for minimal sample drift over time. Second, we developed two algorithms with the ImageJ software (National Institute of Health, Bethesda, MD) to correct the residual drift using lateral and axial registration of the collagen network. Finally, we applied the macro we developed to track fluorescent T cells in explanted skin. We found that our newly developed macro is more efficient than freely or commercially available software for shift correction, leading to more accurate velocity calculations. Our work provides a practical guide for investigators interested to employ skin‐imaging approaches and offers a free alternative to commercial software for correcting lateral and axial drifts. Microsc. Res. Tech. 78:294–301, 2015. © 2015 Wiley Periodicals, Inc.     

Parallel confocal microscopy using high‐order axially symmetric polarized beams

A novel scheme of parallel confocal microscopy using high‐order axially symmetric polarized beams (ASPBs) is proposed. The basic concept of ASPBs is introduced first, then the principle of the scheme is presented, finally some numerical results are shown to verify the feasibility of the scheme. Seen from the results, multiple imaging spots are obtained and the size of spots is about 70% of the spot size in the single lens microscopy, and a kind of high temporal and spatial resolution parallel confocal microscopy is achieved, which may find wide applications in the fields of 3D profile measurement and biomedical imaging. Microsc. Res. Tech. 78:302–308, 2015. © 2015 Wiley Periodicals, Inc.     

Three‐dimensional imaging of porous media using confocal laser scanning microscopy

In the last decade, imaging techniques capable of reconstructing three‐dimensional (3‐D) pore‐scale model have played a pivotal role in the study of fluid flow through complex porous media. In this study, we present advances in the application of confocal laser scanning microscopy (CLSM) to image, reconstruct and characterize complex porous geological materials with hydrocarbon reservoir and CO₂ storage potential. CLSM has a unique capability of producing 3‐D thin optical sections of a material, with a wide field of view and submicron resolution in the lateral and axial planes. However, CLSM is limited in the depth (z‐dimension) that can be imaged in porous materials. In this study, we introduce a ‘grind and slice’ technique to overcome this limitation. We discuss the practical and technical aspects of the confocal imaging technique with application to complex rock samples including Mt. Gambier and Ketton carbonates. We then describe the complete workflow of image processing to filtering and segmenting the raw 3‐D confocal volumetric data into pores and grains. Finally, we use the resulting 3‐D pore‐scale binarized confocal data obtained to quantitatively determine petrophysical pore‐scale properties such as total porosity, macro‐ and microporosity and single‐phase permeability using lattice Boltzmann (LB) simulations, validated by experiments.     

Different bacterial models for in vitro induction of non‐cavitated enamel caries‐like lesions: Microhardness and polarized light miscroscopy analyses

The aim of this study was to compare different bacterial models for in vitro induction of non‐cavitated enamel caries‐like lesions by microhardness and polarized light microscopy analyses. One hundred blocks of bovine enamel were randomly divided into four groups (n = 25) according to the bacterial model for caries induction: (A) Streptococcus mutans, (B) S. mutans and Lactobacillus acidophilus, (C) S. mutans and L. casei, and (D) S. mutans, L. acidophilus, and L. casei. Within each group, the blocks were randomly divided into five subgroups according to the duration of the period of caries induction (4–20 days). The enamel blocks were immersed in cariogenic solution containing the microorganisms, which was changed every 48 h. Groups C and D presented lower surface hardness values (SMH) and higher area of hardness loss (ΔS) after the cariogenic challenge than groups A and B (P < 0.05). As regards lesion depth, under polarized light microscopy, group A presented significantly lower values, and groups C and D the highest values. Group B showed a higher value than group A (P < 0.05). Groups A and B exhibited subsurface caries lesions after all treatment durations, while groups C and D presented erosion‐type lesions with surface softening. The model using S. mutans, whether or not it was associated with L. acidophilus, was less aggressive and may be used for the induction of non‐cavitated enamel caries‐like lesions. The optimal period for inducing caries‐like lesions was 8 days. Microsc. Res. Tech. 78:444–451, 2015. © 2015 Wiley Periodicals, Inc.     

Second Harmonic Generation in 3‐D Uniform Arrangement of Type I Collagen on Nonlinear Optics Microscopy

Second harmonic microscopic imaging and spectroscopy technology has become a powerful tool for biomedical studies, especially in fibrosis‐related diseases research. And type I collagen is the major risk factors for fibrotic diseases. In this study, model for three‐dimensional (3‐D) uniform arrangement type I collagen is set up for researching the second harmonic generation (SHG) on nonlinear optics microscopy. Based on this model, we discuss the influence of different length and size collagen in 3‐D arrangement type I collagen. Results can guide us to neatly judge the size, length, and molecules density effect on SHG. For practical application, this theoretical approach can lead us to analyze different severity of collagen diseases. SCANNING 35:12‐16, 2013. © 2012 Wiley Periodicals, Inc.     

A simple,straightforward correlative live‐cell‐imaging‐structured‐illumination‐microscopy approach for studying organelle dynamics

Most cellular organelles are highly dynamic and continuously undergo membrane fission and fusion to mediate their function. Documenting organelle dynamics under physiological conditions, therefore, requires high temporal resolution of the recording system. Concurrently, these structures are relatively small and determining their substructural organization is often impossible using conventional microscopy. Structured Illumination Microscopy (SIM) is a super resolution technique providing a two‐fold increase in resolution. Importantly, SIM is versatile because it allows the use of any fluorescent dye or protein and, hence, is highly applicable for cell biology. However, similar to other SR techniques, the applicability of SIM to high‐speed live cell imaging is limited. Here we present an easy, straightforward methodology for coupling of high‐speed live cell recordings, using spinning disk (SD) microscopy, with SIM. Using this simple methodology, we are able to track individual mitochondrial membrane fission and fusion events in real time and to determine the network connectivity and substructural organization of the membrane at high resolution. Applying this methodology to other cellular organelles such as, ER, golgi, and cilia will no doubt contribute to our understanding of membrane dynamics in cells. Microsc. Res. Tech. 78:777–783, 2015. © 2015 Wiley Periodicals, Inc.     

Reflectance confocal‐laser‐scanning microscopy in vivo assessments of cigarette‐induced dynamic alterations of cutaneous microcirculation on histomorphological level

Objective: Until now, high resolution reflectance confocal‐laser‐scanning microscopy (CLSM) was used for observation of cutaneous morphology in vivo and in real time. We hypothesized that CLSM also allows observation of dynamic processes of cutaneous microcirculation. Methods: Reflectance CLSM (Vivascope1500; Lucid, Rochester, NY) was performed in 24 young male habitual smokers (23 years, range: 19–26, body mass index 23.9 ± 4.04) with relatively limited cigarette exposure (mean: 3.1 ± 2.4 pack‐years). Eight matched nonsmokers served as controls. The quantitative blood cell flow and the diameter of capillary loops were determined prior (baseline), during, as well as 5 and 10 min after smoking. Results: Baseline value for blood cell flow was 55.50 ± 2.33 cells/min, and decreased over 45% during smoking (30.43 ± 3.76/min; P = 0.02). They were still 22% lower (43.33 ± 2.45/min; P = 0.01) 5 min after smoking and exceeded baseline values 10 min after smoking by 13% (63.00 ± 3.10/min; P > 0.05). The baseline values for capillary loop diameter (9.03 ± 0.22 μm) decreased by 21% (7.18 ± 0.28 μm; P = 0.03) during smoking, remained about 9% (8.23 ± 0.18 μm; P = 0.01) lower 5 min after smoking and exceeded baseline values insignificantly by 4% (9.38 ± 0.28 μm; P > 0.05) 10 min after smoking. There were no significant differences to the controls. Conclusion: Reflectance CLSM enables qualitative and quantitative observation of dynamic processes of cutaneous microcirculation on histomorphological level. Microsc. Res. Tech., 2009. © 2008 Wiley‐Liss, Inc.     

Correlative scanning electron and confocal microscopy imaging of labeled cells coated by indium‐tin‐oxide

Confocal microscopy imaging of cells allows to visualize the presence of specific antigens by using fluorescent tags or fluorescent proteins, with resolution of few hundreds of nanometers, providing their localization in a large field‐of‐view and the understanding of their cellular function. Conversely, in scanning electron microscopy (SEM), the surface morphology of cells is imaged down to nanometer scale using secondary electrons. Combining both imaging techniques have brought to the correlative light and electron microscopy, contributing to investigate the existing relationships between biological surface structures and functions. Furthermore, in SEM, backscattered electrons (BSE) can image local compositional differences, like those due to nanosized gold particles labeling cellular surface antigens. To perform SEM imaging of cells, they could be grown on conducting substrates, but obtaining images of limited quality. Alternatively, they could be rendered electrically conductive, coating them with a thin metal layer. However, when BSE are collected to detect gold‐labeled surface antigens, heavy metals cannot be used as coating material, as they would mask the BSE signal produced by the markers. Cell surface could be then coated with a thin layer of chromium, but this results in a loss of conductivity due to the fast chromium oxidation, if the samples come in contact with air. In order to overcome these major limitations, a thin layer of indium‐tin‐oxide was deposited by ion‐sputtering on gold‐decorated HeLa cells and neurons. Indium‐tin‐oxide was able to provide stable electrical conductivity and preservation of the BSE signal coming from the gold‐conjugated markers. Microsc. Res. Tech. 78:433–443, 2015. © 2015 Wiley Periodicals, Inc.     

Tracing DiO-labelled tumour cells in liver sections by confocal laser scanning microscopy

Investigating rare cellular events is facilitated by studying thick sections with confocal laser scanning microscopy (CLSM). Localization of cells in tissue sections can be done by immunolabelling or by fluorescent labelling of cells prior to intravenous administration. Immunolabelling is technically complicated because of the preservation of antigens during fixation and the problems associated with the penetration of the antibodies. In this study, an alternative and simple approach for the labelling of cells in vitro with the fluorescent probe DiO and its subsequent application in vivo will be outlined. The method was applied to trace DiO‐labelled colon carcinoma cells (CC531s) in 100 µm thick liver sections. In vitro and in vivo experiments revealed that DiO‐labelling of CC531s cells had no cytotoxic or antiproliferative effect and the cells preserved their susceptibility towards hepatic NK cells or Kupffer cells. In addition, DiO remained stable for at least 72 h in the living cell. DiO‐labelled CC531s cells could be traced all over the tissue depth and anti‐metastatic events such as phagocytosis of tumour cells by Kupffer cells could be easily observed. In situ staining with propidium iodide (nucleic acids) or rhodamine‐phalloidin (filamentous actin) resulted in additional tissue information. The data presented improved the understanding of the possible effects of the vital fluorescent probe DiO on cell function and provided a limit of confidence for CLSM imaging of DiO‐labelled cells in tissue sections.     

Changes in actin and tubulin expression in osteogenic cells cultured on bioactive glass‐based surfaces

The present study evaluated whether the changes in the labeling pattern of cytoskeletal proteins in osteogenic cells cultured on bioactive glass‐based materials are due to altered mRNA and protein levels. Primary rat‐derived osteogenic cells were plated on Bioglass® 45S5, Biosilicate®, and borosilicate (bioinert control). The following parameters were assayed: (i) qualitative epifluorescence analysis of actin and tubulin; (ii) quantitative mRNA and protein expression for actin and tubulin by real‐time PCR and ELISA, respectively, and (iii) qualitative analysis of cell morphology by scanning electron microscopy (SEM). At days 3 and 7, the cells grown on borosilicate showed typical actin and tubulin labeling patterns, whereas those on the bioactive materials showed roundish areas devoid of fluorescence signals. The cultures grown on bioactive materials showed significant changes in actin and tubulin mRNA expression that were not reflected in the corresponding protein levels. A positive correlation between the mRNA and protein as well as an association between epifluorescence imaging and quantitative data were only detected for the borosilicate. SEM imaging of the cultures on the bioactive surfaces revealed cells partly or totally coated with material aggregates, whose characteristics resembled the substrate topography. The culturing of osteogenic cells on Bioglass® 45S5 and Biosilicate® affect actin and tubulin mRNA expression but not the corresponding protein levels. Changes in the labeling pattern of these proteins should then be attributed, at least in part, to the presence of a physical barrier on the cell surface as a result of the material surface reactions, thus limiting fluorescence signals. Microsc. Res. Tech. 78:1046–1053, 2015. © 2015 Wiley Periodicals, Inc.     

Mapping of somatostatin‐28 (1‐12) in the alpaca (Lama pacos) brainstem

Using an indirect immunoperoxidase technique, we studied the distribution of cell bodies and fibers containing somatostatin‐28 (1‐12) in the alpaca brainstem. Immunoreactive fibers were widely distributed throughout the whole brainstem: 34 brainstem nuclei/regions showed a high or a moderate density of these fibers. Perikarya containing the peptide were widely distributed throughout the mesencephalon, pons and medulla oblongata. Cell bodies containing somatostatin‐28 (1‐12) were observed in the lateral and medial divisions of the marginal nucleus of the brachium conjunctivum, reticular formation (mesencephalon, pons and medulla oblongata), inferior colliculus, periaqueductal gray, superior colliculus, pericentral division of the dorsal tegmental nucleus, interpeduncular nucleus, nucleus of the trapezoid body, vestibular nucleus, motor dorsal nucleus of the vagus, nucleus of the solitary tract, nucleus praepositus hypoglossi, and in the substantia nigra. This widespread distribution indicates that somatostatin‐28 (1‐12) is involved in multiple physiological actions in the alpaca brainstem. Microsc. Res. Tech. 78:363–374, 2015. © 2015 Wiley Periodicals, Inc.     

Cryo‐scanning x‐ray diffraction microscopy of frozen‐hydrated yeast

We developed cryo‐scanning x‐ray diffraction microscopy, utilizing hard x‐ray ptychography at cryogenic temperature, for the noninvasive, high‐resolution imaging of wet, extended biological samples and report its first frozen‐hydrated imaging. Utilizing phase contrast at hard x‐rays, cryo‐scanning x‐ray diffraction microscopy provides the penetration power suitable for thick samples while retaining sensitivity to minute density changes within unstained samples. It is dose‐efficient and further minimizes radiation damage by keeping the wet samples at cryogenic temperature. We demonstrate these capabilities in two dimensions by imaging unstained frozen‐hydrated budding yeast cells, achieving a spatial resolution of 85 nm with a phase sensitivity of 0.0053 radians. The current work presents the feasibility of cryo‐scanning x‐ray diffraction microscopy for quantitative, high‐resolution imaging of unmodified biological samples extending to tens of micrometres.     

Imaging analysis of the interface between osteoblasts and microrough surfaces of laser‐sintered titanium alloy constructs

Previous work using focused ion beam (FIB) analysis of osteoblasts on smooth and microrough Ti surfaces showed that the average cell aspect ratio and distance from the surface are greater on the rough surface. In order to better interrogate the relationship between individual cells and their substrate using multiple imaging modalities, we developed a method that tracks the same cell across confocal laser scanning microscopy (CLSM) to correlate surface microroughness with cell morphology and cytoskeleton; scanning electron microscopy (SEM) to provide higher resolution for observation of nanoroughness as well as chemical mapping via energy dispersive X‐ray spectroscopy; and transmission electron microscopy (TEM) for high‐resolution imaging. FIB was used to prepare thin sections of the cell‐material interface for TEM, or for three‐dimensional electron tomography. Cells were cultured on laser‐sintered Ti‐6Al‐4V substrates with polished or etched surfaces. Direct cell to surface attachments were observed across surfaces, though bridging across macroscale surface features occurred on rough substrates. Our results show that surface roughness, cell cytoskeleton and gross morphology can be correlated with the cell‐material cross‐sectional interface at the single cell level across multiple high‐resolution imaging modalities. This work provides a platform method for further investigating mechanisms of the cell‐material interface.     

Quantitative characterization of chitosan in the skin by Fourier‐transform infrared spectroscopic imaging and ninhydrin assay: application in transdermal sciences

The chitosan has been used as the primary excipient in transdermal particulate dosage form design. Its distribution pattern across the epidermis and dermis is not easily accessible through chemical assay and limited to radiolabelled molecules via quantitative autoradiography. This study explored Fourier‐transform infrared spectroscopy imaging technique with built‐in microscope as the means to examine chitosan molecular distribution over epidermis and dermis with the aid of histology operation. Fourier‐transform infrared spectroscopy skin imaging was conducted using chitosan of varying molecular weights, deacetylation degrees, particle sizes and zeta potentials, obtained via microwave ligation of polymer chains at solution state. Both skin permeation and retention characteristics of chitosan increased with the use of smaller chitosan molecules with reduced acetyl content and size, and increased positive charge density. The ratio of epidermal to dermal chitosan content decreased with the use of these chitosan molecules as their accumulation in dermis (3.90% to 18.22%) was raised to a greater extent than epidermis (0.62% to 1.92%). A larger dermal chitosan accumulation nonetheless did not promote the transdermal polymer passage more than the epidermal chitosan. A small increase in epidermal chitosan content apparently could fluidize the stratum corneum and was more essential to dictate molecular permeation into dermis and systemic circulation. The histology technique aided Fourier‐transform infrared spectroscopy imaging approach introduces a new dimension to the mechanistic aspect of chitosan in transdermal delivery.     

AFM Investigation on Ox‐LDL‐Induced Changes in Cell Spreading and Cell‐Surface Adhesion Property of Endothelial Cells

The integrity and adhesion properties of endothelium play vital roles during atherosclerosis. It is well known that oxidized low‐density lipoprotein (Ox‐LDL) influences many physiological activities or mechanical properties of endothelial cells. However, the effects of Ox‐LDL on the integrity and nonspecific adhesion properties of endothelial cells are still unclear. In this study, using the topographical imaging and force measurement functions of atomic force microscopy (AFM), we found that Ox‐LDL can transiently weaken the integrity of endothelium by impairing cell spreading of endothelial cells and decrease the attachment of irrelevant blood cells to endothelium by impairing the nonspecific adhesion property of endothelial cells. The AFM‐based data provide important information for understanding the effects of Ox‐LDL on endothelial cells or during atherogenesis. SCANNING 35: 119‐126, 2013. © 2012 Wiley Periodicals, Inc.