Tailored Synthesis of 162‐Residue S‐Monoglycosylated GM2‐Activator Protein (GM2AP) Analogues that Allows Facile Access to a Protein Library

A synthetic protocol for the preparation of 162‐residue S‐monoglycosylated GM2‐activator protein (GM2AP) analogues bearing various amino acid substitutions for Thr69 has been developed. The facile incorporation of the replacements into the protein was achieved by means of a one‐pot/N‐to‐C‐directed sequential ligation strategy using readily accessible middle N‐sulfanylethylanilide (SEAlide) peptides each consisting of seven amino acid residues. A kinetically controlled ligation protocol was successfully applied to the assembly of three peptide segments covering the GM2AP. The native chemical ligation (NCL) reactivities of the SEAlide peptides can be tuned by the presence or absence of phosphate salts. Furthermore, NCL of the alkyl thioester fragment [GM2AP (1–31)] with the N‐terminal cysteinyl prolyl thioester [GM2AP (32–67)] proceeded smoothly to yield the 67‐residue prolyl thioester, with the prolyl thioester moiety remaining intact. This newly developed strategy enabled the facile synthesis of GM2AP analogues. Thus, we refer to this synthetic protocol as “tailored synthesis” for the construction of a GM2AP library.     

Optically Active 4‐Substituted (S)‐2‐Phenyl‐2‐oxazolines

(R)‐4‐Hydroxymethyl‐2‐phenyl‐2‐oxazoline (R)‐ 1 ) was prepared from (L)‐serine. The respective tosylate ((S)‐ 2 ) was converted into sulfides (S)‐ 4 and (S)‐ 5 , and sulfone (S)‐ 6 , useful starting materials for the elaboration of additional chiral centers. A previously reported [ α]_D ²⁵ value for (R)‐ 4 is corrected.     

Rhodium(I)‐Catalyzed Diastereoselective Cycloisomerization of Enynes with Tethered (S)‐2‐Methyl‐2‐propanesulfinyl Imine

The rhodium(I)‐catalyzed cycloisomerization of enynes with tethered (S)‐2‐methyl‐2‐propanesulfinyl imine affords 5‐ or 6‐membered cyclic compounds containing exocyclic 1,3‐diene moieties in a stereoselective manner. The reaction proceeds through β‐hydride elimination of a 7‐membered azarhodacycle intermediate, which is generated from three unsaturated bonds (i.e., alkene, alkyne, and CN bonds) and an Rh(I) complex. The resultant cyclic compounds could be reacted with various dienophiles to afford spiroamides as single isomers through the Diels–Alder reaction.

     

Synthesis of biodegradable polyurethanes chain‐extended with (2S)‐bis(2‐hydroxypropyl) 2‐aminopentane dioate

Polyurethanes (PUs) are the most widely used polymers because of their biocompatibility, tunable mechanical properties, and chemical versatility. In this study, a two‐step condensation polymerization of polycaprolactone diol and hexamethylene diisocyanate was carried out, and a glutamic acid ester derivative, (2S)‐bis(2‐hydroxypropyl) 2‐aminopentane dioate (HPAP), was used as a new chain extender to accelerate the biodegradation properties of PU. HPAP was synthesized by the Fischer esterification of l ‐glutamic acid. The chemical structure of HPAP was confirmed by high‐resolution mass spectroscopy and m/z (EI) was found to be 264.1447 [calculated value = 264.1443 for C₁₁H₂₁NO₆ (M⁺)]. The Berry plot of static light‐scattering measurements showed that PU–HPAP had a weight‐average molecular weight and radius of gyration of 33,100 g/mol and 1420 nm, respectively. The presence of HPAP in the PU structure facilitated hydrogen bonding between the polymer chains and increased the glass‐transition temperature from ?56 °C (PU) to ?50 °C (PU–HPAP). PU–HPAP showed the highest hydrophilicity and surface free energy among all of samples, and this accelerated the in vitro biodegradation period via surface erosion. In addition, PU–HPAP did not show any cytotoxic effects on the L929 cells. A new biodegradable and biocompatible PU–HPAP was obtained as candidate for tissue engineering applications. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45764.     

Poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)– poly(dimethylsiloxane) block copolymers

The hydrolytic condensation of 1,3‐dichloro‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane under neutral conditions produced α'ω‐dihydroxy‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane (polymerization degree ≈ 4). The homofunctional condensation of α'ω‐dihydroxy‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane in a toluene solution and in the presence of activated carbon was performed, and dihydroxy‐containing oligomers with various degrees of condensation were obtained. Through the heterofunctional condensation of dihydroxy‐containing oligomers with α'ω‐dichlorodimethylsiloxanes in the presence of amines, corresponding block copolymers were obtained. Gel permeation chromatography, differential scanning calorimetry, thermomechanical analysis, thermogravimetry, and wide‐angle roentgenography investigations were carried out. Differential scanning calorimetry and roentgenography studies of the block copolymers showed that their properties were determined by the ratio of the lengths of the flexible and linear poly(dimethylsiloxane) and rigid poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane) fragments in the macromolecular chain. At definite values of the lengths of the flexible and rigid fragments, a microheterogeneous structure was observed in the synthesized block copolymers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1409–1417, 2002; DOI 10.1002/app.10335     

Poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane‐poly(dimethylsiloxane) block copolymers

The heterofunctional condensation of 1,3‐dichloro‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane with dihydroxydiphenylsilane at various ratios of initial compounds in the presence of amines was carried out, and α,ω‐dihydroxy(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane oligomers with various degrees of condensation were obtained. Corresponding block copolymers were obtained by heterofunctional polycondensation of synthesized α,ω‐dihydroxy(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane oligomers with α,ω‐dichlorodimethylsiloxanes in the presence of amines. Thermogravimetry, gel permeation chromatography, differential scanning calorimetry, and wide‐angle X‐ray analysis were carried out on the synthesized block coplymers. Differential scanning calorimetry and wide‐angle X‐ray studies of these copolymers showed that their properties were determined by the ratio of the lengths of the flexible linear poly(dimethylsiloxane) and rigid poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane fragments in the main macromolecular chain. Two‐phase systems were obtained with specific flexible and rigid fragment length values in synthesized block copolymers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3462–3467, 2006     

Synthesis of poly(β‐pinene)‐g‐polystyrene from allylic brominated poly(β‐pinene)

Poly(β‐pinene) was brominated by N‐bromosuccinimide on the allylic carbons. Then the brominated product was activated by AlEt₂Cl to initiate the polymerization of styrene to give a β‐pinene/styrene graft copolymer. AlEt₂Cl was selected because it alone could not initiate the polymerization of styrene. The obtained graft copolymer was characterized by GPC, ¹H‐NMR, and DSC measurements, respectively. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 599–603, 2000     

Proton conducting polymer blends from poly(2,5‐benzimidazole) and poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)

Proton conducting polymer electrolyte membranes were produced by blending of poly(2,5‐benzimidazole) (ABPBI) and poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) (PAMPS) at several stoichiometric ratios with respect to polymer repeating units. The membranes were characterized by using Fourier transform infrared spectroscopy for interpolymer interactions and scanning electron microscope for surface morphology. Thermal stability of the materials was investigated by thermogravimetric analysis. Glass transition temperatures of the samples were measured via differential scanning calorimetry. The spectroscopic measurements and water uptake studies indicate a complexation between ABPBI and PAMPS that inhibited polymer exclusion up on swelling in excess water. Proton conductivities of the anhydrous and humidified samples were measured using impedance spectroscopy. The proton conductivity of the humidified ABPBI:PAMPS (1 : 2) blend showed a proton conductivity of 0.1 S/cm, which is very close to Nafion 117, at 20°C at 50% relative humidity. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Atom transfer radical polymerization of (R)‐2‐methacryloyloxy‐2′‐methoxy‐1,1′‐binaphthalene

Atom transfer radical polymerization (ATRP) of (R)‐2‐methacryloyloxy‐2′‐methoxy‐1,1′‐binaphthalene ((R)‐MAMBN) mediated by different amine ligands, copper(I) chloride and ethyl 2‐bromopropionate in different solvents, and reverse ATRP of (R)‐MAMBN were studied. It was shown that optically active polymers were obtained, with poor control of the molecular weights, and low polydispersities. Specific rotation of the polymers increased with increasing molecular weights. By comparison with (R)‐MAMBN, poly((R)‐MAMBN)s exhibits higher specific rotation and a positive Cotton effect. Copyright © 2003 Society of Chemical Industry     

Heparin‐immobilized poly(2‐hydroxyethylmethacrylate)‐based microspheres

Poly(2‐hydroxyethylmethacrylate) (PHEMA)‐based microspheres (150–200 µm in diameter) were produced by a modified suspension polymerization of different type of comonomers—namely, acrylic acid, dimethylaminoethyl‐methacrylate, and methylmethacrylate. These microspheres were activated with cyanogen bromide (CNBr) at pH 11.5, and heparin molecules were then immobilized through covalent bonds. The amount of immobilized heparin was controlled by changing the initial concentration of CNBr and heparin. The increase in the initial concentrations of both CNBr and heparin caused an increase in the amount of heparin immobilized onto microspheres for all polymer surfaces. The maximum heparin immobilization was observed on the PHEMA homopolymer microspheres (180 mg/g). The plain and heparin‐immobilized microspheres were contacted with blood in in vitro systems and in ex vivo animal experiments. Loss of the blood cells and clotting times were followed. Anticoagulant effect of the immobilized heparin was clearly observed with blood coagulation experiments. Loss of cells in the blood contacting with heparin‐immobilized microspheres was significantly lower than those observed with the plain microspheres. Bovine serum albumin adsorption onto the microspheres containing heparin on their surfaces was also studied. High albumin adsorption values (up to 127 mg/g) were observed in which the heparin‐immobilized PHEMA microspheres were used. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 655–662, 1999     

Stabilization of Telomeric I‐Motif Structures by (2′S)‐2′‐Deoxy‐2′‐C‐Methylcytidine Residues

G‐quadruplexes and i‐motifs are tetraplex structures present in telomeres and the promoter regions of oncogenes. The possibility of producing nanodevices with pH‐sensitive functions has triggered interest in modified oligonucleotides with improved structural properties. We synthesized C‐rich oligonucleotides carrying conformationally restricted (2′S)‐2′‐deoxy‐2′‐C‐methyl‐cytidine units. The effect of this modified nucleoside on the stability of intramolecular i‐motifs from the vertebrate telomere was investigated by UV, CD, and NMR spectroscopy. The replacement of selected positions of the C‐core with C‐modified residues induced the formation of stable intercalated tetraplexes at near‐neutral pH. This study demonstrates the possibility of enhancing the stability of the i‐motif by chemical modification.     

Synthesis and Biological Characterization of (3R,4R)‐4‐(2‐(Benzhydryloxy)ethyl)‐1‐((R)‐2‐hydroxy‐2‐phenylethyl)‐piperidin‐3‐ol and Its Stereoisomers for Activity toward Monoamine Transporters

A novel series of optically active molecules based on a 4‐(2‐(benzhydryloxy)ethyl)‐1‐((R)‐2‐hydroxy‐2‐phenylethyl)‐piperidin‐3‐ol template were developed. Depending on stereochemistry, the compounds exhibit various degrees of affinity for three dopamine, serotonin, and norepinephrine transporters. These molecules have the potential for treating several neurological disorders such as drug abuse, depression, and attention deficit hyperactivity disorder.

     

Versatile Synthesis of Pyrrole‐2‐acetic Esters and (Pyridine‐2‐one)‐3‐acetic Amides by Palladium‐Catalyzed,Carbon Dioxide‐Promoted Oxidative Carbonylation of (Z)‐(2‐En‐4‐ynyl)amines

The oxidative carbonylation of readily available (Z)‐(2‐en‐4‐ynyl)amines, catalyzed by the PdI₂‐KI system, selectively afforded in satisfactory yields (40–95 %) either pyrrole‐2‐acetic ester or (pyridine‐2‐one)‐3‐acetic amide derivatives, depending on the susbtitution pattern of the substrate and the reaction conditions. The presence of an excess of carbon dioxide proved in most cases to be beneficial to both the reaction rate and product selectivity.     

Poly(2,6‐di(thiophene‐2‐yl)‐3,5bis(4‐(thiophene‐2‐yl)phenyl)dithieno [3,2‐b;2',3'‐d]thiophene)/carbon nanotube composite for capacitor applications

A novel monomer, 2,6‐di(thiophene‐2‐yl)‐3,5bis(4‐(thiophene‐2‐yl)phenyl)dithieno[3,2‐b;2',3'‐d]thiophene ( Th₄DTT) has been synthesized and used as an electro‐active material. It has been electropolymerized onto glassy carbon (GC) electrode in sodium dodecyl sulfate (SDS) solution (0.1 M) together with multi‐walled carbon nanotubes (MWCNT). A good capacitive characteristics for P(Th₄DTT)/MWCNT composite has been obtained by electrochemical impedance spectroscopy (EIS), which is, to our best knowledge, the first report on capacitor behavior of a dithienothiophene. A synergistic effect has been resolved by Nyquist, Bode‐magnitude—phase and admittance plots. Specific capacitance of the conducting polymer/MWCNT, calculated from cyclic voltammogram (CV) together with area and charge formulas, has been found to be 20.17 F g^?1. Long‐term stability of the capacitor has also been tested by CV, and the results indicated that, after 500 cycles, the specific capacitance is 87.37% of the initial capacitance. An equivalent circuit model of R_s(C₁(R₁(Q(R₂W))))(C₂R₃) has been obtained to fit the experimental and theoretical data. The double layer capacitance (C_dl) value of P(Th₄DTT)/MWCNT (4.43 mF cm^?2) has been found to be 25 times higher than P(Th₄DTT) (C_dl= 0.18 mF cm^?2). © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40061.     

Electrochemical synthesis of poly(2‐iodoaniline) and poly(aniline‐co‐2‐iodoaniline) in acetonitrile

Poly(2‐iodoaniline) (PIANI) and poly(aniline‐co‐2‐iodoaniline) [P(An‐co‐2‐IAn)] were synthesized by electrochemical methods in acetonitrile solution containing tetrabutylammonium perchlorate (TBAP) and perchloric acid (HClO₄). The voltametry of the copolymer shows characteristics similar to those of conventional polyaniline (PANI), and it exhibits higher dry electrical conductivity than PIANI and lower than PANI. The observed decrease in the conductivity of the copolymer relative to PANI is attributed to the incorporation of the iodine moieties into the PANI chain. The structure and properties of these conducting films were characterized by FTIR and UV‐Vis spectroscopy and by an electrochemical method (cyclic voltametry). Conductivity values, FTIR and UV‐Vis spectra of the PIANI and copolymer were compared with those of PANI and the relative solubility of the PIANI and the copolymer powders was determined in various organic solvents. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1652–1658, 2003     

Synthesis,characterization, and thermal degradation of novel poly(2‐(5‐bromo benzofuran‐2‐yl)‐2‐oxoethyl methacrylate)

A novel methacrylate monomer containing benzofuran side group, 2‐(5‐bromo benzofuran‐2‐yl)‐2‐oxoethyl methacrylate (BOEMA), was synthesized from esterification reaction of 2‐bromo‐1‐(5‐bromo benzofuran‐2‐yl) ethanone with sodium methacrylate at 85°C in the presence of 1,4‐dioxane solvent. After characterization with Fourier transform infrared spectrophotometer, nuclear magnetic resonance (¹H‐NMR and ¹³C‐NMR), its homopolymerization was carried out by free radical polymerization at 60°C in the presence of benzoyl peroxide initiator and 1,4‐dioxane solvent. The glass transition temperature (T_g) of the synthesized novel polymer, poly(2‐(5‐bromo benzofuran‐2‐yl)‐2‐oxoethyl methacrylate) [poly(BOEMA)], was determined to be 137°C with differential scanning calorimetry technique. Thermal degradation kinetics of poly(BOEMA) was investigated by thermogravimetric analysis method at different heating rates with 5°C/min intervals between measurements. From dynamic measurements, the analysis of each process mechanism of Coats–Redfern and Van Krevelen methods showed that the most probable model for the decomposition process of poly(BOEMA) homopolymer agrees with the random nucleation, F₁ mechanism. The apparent decomposition activation energies of poly(BOEMA) by Kissinger's and Flynn–Wall–Ozawa methods in the studied conversion range were 188.47 and 180.13 kJ/mol, respectively. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Electrochemical preparation of poly(2‐bromoaniline) and poly(aniline‐co‐2‐bromoaniline) in acetonitrile

Electrochemical preparation of poly(2‐bromoaniline) (PBrANI) and poly(aniline‐co‐2‐bromoaniline) [P(An‐co‐2‐BrAn)] was carried out in an acetonitrile solution containing tetrabutylammonium perchlorate (TBAP) and perchloric acid (HClO₄). The cyclic voltammograms during the copolymerization had many features similar to those for the usual polymerization of aniline. The copolymer exhibits a higher dry electrical conductivity value than that of PBrANI and a lower one than that of PANI. The observed decrease in the conductivity of the copolymer relative to PANI is attributed to the incorporation of bromine moieties into the polyaniline chain. The structure and properties of the polymer and copolymer were elucidated using cyclic voltammetry (CV), FTIR, and UV‐vis spectroscopy. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2460–2468, 2003     

Synthesis and Properties of Branched Oligo(2‐thienyl)‐ and Oligo(2,2′‐bithien‐5‐yl)‐Substituted Pyridine Derivatives

Starting from easily accessible precursors we describe the preparation of a series of branched oligo(2‐thienyl)‐ and oligo(2,2′‐bithienyl)‐substituted pyridine derivatives. With palladium‐catalyzed cross‐coupling reactions of pyridyl nonaflates/triflates as key steps we synthesized 2,6‐di(2‐thienyl)pyridines bridged by thiophene or benzene rings. By selective bromination of 2,6‐di(2‐thienyl)pyridine and 2,4,6‐tri(2‐thienyl)pyridine and subsequent coupling reactions an access to oligo(2,2′‐bithien‐5‐yl)‐substituted pyridine derivatives was gained. The constitution and solid state conformation of 2,6‐bis(2,2’‐bithien‐5‐yl)pyridine was determined by X‐ray analysis. This series of new pyridine‐thiophene conjugates was systematically investigated by UV/vis spectroscopy. Large Stokes shifts in the neutral and protonated form were observed. The electrochemical oxidation of two typical compounds was studied, however, these oxidations were irreversible forming a polymeric film at the anode. As a selected example, a thiophene‐bridged 2,6‐di(2‐thienyl)pyridine derivative was also investigated by scanning tunneling microscopy showing an interesting self‐assembly into a highly ordered monolayer on highly oriented pyrolytic graphite.

     

Silicone hydrogels based on a novel amphiphilic poly(2‐methyl‐2‐oxazoline)‐b‐poly(dimethyl siloxane) copolymer

A novel amphiphilic hydrogel based on poly(2‐methyl‐2‐oxazoline)‐b‐poly(dimethyl siloxane) (PMeOx–PDMS) block copolymer was developed. First of all, PMeOx–PDMS macromonomer was synthesized by coupling mono‐hydroxylated PMeOx with PDMS followed by end‐capping with methacrylate group. The structures of each step were characterized by NMR and titration. After that, silicone hydrogels were prepared by UV‐initiated copolymerization of PMeOx–PDMS macromonomer with monomers such as 2‐hydroxyethyl methacrylate in the presence of a crosslinker. Measurements of the hydrogels' water contact angle, equilibrium water content, and tensile properties showed that the hydrogels possessed better hydrophilic surface, higher water content, and better ion permeability with the increase of the content of the macromonomer PMeOx–PDMS. Meanwhile, the tensile strength and Young's modulus of the hydrogels decreased slightly. Protein adsorption tests showed that the hydrogels had strong antifouling ability after the incorporation of PMeOx. This newly described hydrogel demonstrated attractive properties to serve as ophthalmic biomaterial. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39867.