Inkjet Printed Metamaterial Loaded Antenna for WLAN/WiMAX Applications

In this paper, the design and performance analysis of an Inkjet-printed metamaterial loaded monopole antenna is presented for wireless local area network (WLAN) and worldwide interoperability for microwave access (WiMAX) applications. The proposed metamaterial structure consists of two layers, one is rectangular tuning fork-shaped antenna, and another layer is an inkjet-printed metamaterial superstate. The metamaterial layer is designed using four split-ring resonators (SRR) with an H-shaped inner structure to achieve negative-index metamaterial properties. The metamaterial structure is fabricated on low-cost photo paper substrate material using a conductive ink-based inkjet printing technique, which achieved dual negative refractive index bands of 2.25–4.25 GHz and 4.3–4.6 GHz. The antenna is designed using a rectangular tuning fork structure to operate at WLAN and WiMAX bands. The antenna is printed on 30 × 39 × 1.27 mm3 Rogers RO3010 substrate, which shows wide impedance bandwidth of 0.75 GHz (2.2 to 2.95 GHz) with 2 dB realized gain at 2.4 GHz. After integrating metamaterial structure, the impedance bandwidth becomes 1.25 GHz (2.33 to 3.58 GHz) with 2.6 dB realized gain at 2.4 GHz. The antenna bandwidth and gain have been increased using developed quad SRR based metasurface by 500 MHz and 0.6 dBi respectively. Moreover, the proposed quad SRR loaded antenna can be used for 2.4 GHz WLAN bands and 2.5 GHz WiMAX applications. The contribution of this work is to develop a cost-effective inject printed metamaterial to enhance the impedance bandwidth and realized the gain of a WLAN/WiMAX antenna.     

Quintuple Band Antenna for Wireless Applications with Small Form Factor

A coplanar waveguide-fed quintuple band antenna with a slotted circular-shaped radiator for wireless applications with a high isolation between adjacent bands is presented in this paper. The proposed antenna resonates at multiple frequencies with corresponding center frequencies of 2.35, 4.92, 5.75, 6.52, and 8.46 GHz. The intended functionality is achieved by introducing a circular disc radiator with five slots and a U-shaped slot in the feed. The proposed antenna exhibits coverage of the maximum set of wireless applications, such as satellite communication, worldwide interoperability for microwave access, wireless local area network (WLAN), long-distance radio telecommunications, and X-band/Satcom wireless applications. The simulation and measurement results of the proposed fabricated antenna demonstrate the high isolation between adjacent bands. A stable realized gain with an advantageous radiation pattern is achieved at the operating frequency bands. The proposed simple design, compact structure, and simple feeding technique make this antenna suitable for integration in several wireless communication applications, where the portability of devices is a significant concern. The proposed antenna is anticipated to be an appropriate candidate for WLAN, long-term evolution, and fifth-generation mobile communication because of its multi-operational bands and compact size for handheld devices.     

Triple-band wireless local area network monopole antenna

A triple-band Bluetooth (BT) and wireless local area network (WLAN) monopole antenna has been proposed based on concepts called capacitive loading/de-loading and inductive loading/de-loading. It has been demonstrated that BT and triple-band WLAN operations, including the BT 2.4 GHz (2.4-2.484 GHz), the WLAN IEEE 802.11 2.4 GHz (2.4-2.484 GHz), 5.2 GHz WLAN (5.15-5.35 GHz) and WLAN 5.8 GHz (5.725- 5.825 GHz) can be achieved by using the monopole antenna with an overall size 8.0 x 11.5 x 1.0 mm³, which is one of the most compact WLAN monopole antennas covering the three frequency bands.     

Compact coplanar waveguide-fed ultra-wideband monopole-like slot antenna

A simple and compact coplanar waveguide (CPW)-fed ultra-wideband (UWB) monopole-like slot antenna is presented. The proposed antenna comprises a monopole-like slot and a CPW fork-shaped feeding structure, which is etched onto an FR4 printed circuit board (PCB) with an overall size of 26 mm x 29 mm x 1.5 mm. The simulation and experiment show that the proposed antenna achieves good impedance matching, consistent gain, stable radiation patterns and consistent group delay over an operating bandwidth of 2.7?12.4 GHz (128.5%). Furthermore, through adding two more grounded open-circuited stubs, the proposed antenna design features band-notched characteristic in the band of 5?6 GHz while maintaining the desirable performance over lower/upper UWB bands of 3.1?4.85 GHz/6.2?9.7 GHz.     

V-Shaped Monopole Antenna with Chichena Itzia Inspired Defected Ground Structure for UWB Applications

Due to rapid growth in wireless communication technology, higher bandwidth requirement for advance telecommunication systems, capable of operating on two or higher bands with higher channel capacities and minimum distortion losses is desired. In this paper, a compact Ultra-Wideband (UWB) V-shaped monopole antenna is presented. UWB response is achieved by modifying the ground plane with Chichen Itzia inspired rectangular staircase shape. The proposed V-shaped is designed by incorporating a rectangle, and an inverted isosceles triangle using FR4 substrate. The size of the antenna is 25 mm×26 mm×1.6 mm. The proposed V-shaped monopole antenna produces bandwidth response of 3 GHz Industrial, Scientific, and Medical (ISM), Worldwide Interoperability for Microwave Access (WiMAX), (IEEE 802.11/HIPERLAN band, 5G sub 6 GHz) which with an additional square cut amplified the bandwidth response up to 8 GHz ranging from 3.1 GHz to 10.6 GHz attaining UWB defined by Federal Communications Commission (FCC) with a maximum gain of 3.83 dB. The antenna is designed in Ansys HFSS. Results for key performance parameters of the antenna are presented. The measured results are in good agreement with the simulated results. Due to flat gain, uniform group delay, omni directional radiation pattern characteristics and well-matched impedance, the proposed antenna is suitable for WiMAX, ISM and heterogeneous wireless systems.     

Compact multiband planar monopole antennas for smart phone applications

A compact multiband planar monopole antenna is discussed. Tuning techniques, including offset feed, etching meandered slot and cutting tuning inset, are applied to the radiator in order to maximise the operating frequency range of the antenna. Experimental results demonstrate that the proposed design covers the operating bands of seven wireless services including the DCS/PCS/W-CDMA/2.4-/5-GHz WLANs/Bluetooth and the WiMAX in United States. The design concept, step-by-step guidelines, radiation mechanism and the simulated and experimental results are carefully investigated. The finite-size ground plane effect is taken into account as well. This antenna features multiband operations, almost omnidirectional radiation patterns in one of the principal cuts, and a compact size of 22.75 times 20 mm². It is especially suitable for smart phone applications which are involving in integrating multiple wireless services into a single hand-held unit.     

Frequency Reconfigurable Antenna for Portable Wireless Applications

In this paper, the design and experimental evaluation of a hexagonal-shaped coplanar waveguide (CPW)-feed frequency reconfigurable antenna is presented using flame retardant (FR)-4 substrate with size of 37 × 35 × 1.6 mm³. The antenna is made tunable to three different modes through the status of two pin diodes to operate in four distinct frequency bands, i.e., 2.45 GHz wireless fidelity (Wi-Fi) in MODE 1, 3.3 GHz (5G sub-6 GHz band) in MODE 2, 2.1 GHz (3G Long Term Evolution (LTE)-advanced) and 3.50 GHz Worldwide Interoperability for Microwave Access (WiMAX) in MODE 3. The optimization through simulation modeling shows that the proposed antenna can provide adequate gain (1.44~2.2 dB), sufficient bandwidth (200~920 MHz) and high radiation efficiency (80%~95%) in the four resonating frequency bands. Voltage standing wave ratio (VSWR) < 1.5 is achieved for all bands with properly matched characteristics of the antenna. To validate the simulation results, fabrication of the proposed optimized design is performed, and experimental analysis is found to be in a considerable amount of agreement. Due to its reasonably small size and support of multiple frequency bands operation, the proposed antenna can support portable devices for handheld 5G and Wireless LAN (WLAN) applications.     

A Novel Compact Highly Isolated UWB MIMO Antenna with WLAN Notch

This paper presents a compact Multiple Input Multiple Output (MIMO) antenna with WLAN band notch for Ultra-Wideband (UWB) applications. The antenna is designed on 0.8 mm thick low-cost FR-4 substrate having a compact size of 22 mm × 30 mm. The proposed antenna comprises of two monopole patches on the top layer of substrate while having a shared ground on its bottom layer. The mutual coupling between adjacent patches has been reduced by using a novel stub with shared ground structure. The stub consists of complementary rectangular slots that disturb the surface current direction and thus result in reducing mutual coupling between two ports. A slot is etched in the radiating patch for WLAN band notch. The slot is used to suppress frequencies ranging from 5.1 to 5.9 GHz. The results show that the proposed antenna has a very good impedance bandwidth of |S11| < −10 dB within the frequency band from 3.1–14 GHz. A low mutual coupling of less than −23 dB is achieved within the entire UWB band. Furthermore, the antenna has a peak gain of 5.8 dB, low ECC < 0.002 and high Diversity Gain (DG > 9.98).     

一种双频MIMO天线的T型枝节解耦设计

本文设计了一种T型枝节解耦的双频MIMO天线.两个工作频段分别覆盖WLAN频率2.45 GHz/5.2 GHz/5.8 GHz.低频谐振单元为倒F天线,通过在低频枝节上增加短截线,用以产生高频谐振,实现双频工作.将天线单元沿水平方向对称放置形成二单元的MIMO天线,并采用在两个天线单元之间添加T型枝节的方法进行解耦.对...     

A simple dual-band microstrip-fed printed antenna for WLAN applications

A novel microstrip-fed dual-band printed antenna for wireless local area network (WLAN) is presented. The antenna comprises a rectangular and a circular radiating element, which generate two resonant modes to cover 2.4/5.2/5.8 GHz WLAN bands. The design was experimentally verified by constructing the antenna on a FR4 (ϵr = 4.4) dielectric substrate (47 mm x 26 mm x 0.76 mm) and measuring its impedance and radiation characteristics at both the bands. The measured 10 dB return loss (VSWR 2:1) bandwidth in the 2.4G Hz band is 550 MHz (2.1?2.65 GHz) and it covers the bandwidth required for 2.4 GHz WLAN. The 5.2/5.8 GHz resonant mode has a bandwidth of 950 MHz (5.15?6.1 GHz) covering 5.2/5.8 GHz WLAN bands. A rigorous experimental evaluation confirmed that the dual-band printed antenna maintained good radiation characteristics with minimum cross-polarisation levels.     

Broadband flexible comb-shaped monopole antenna

A broadband comb-shaped monopole antenna is proposed. The antenna has dimensions of 19 mm x 12 mm. The measured results show good agreement with the numerical prediction, and broadband operation with 10 dB impedance bandwidth of 44.75% (1.7-2.68 GHz). The antenna is built on one side of a flexible-printed circuit board (PCB) dielectric substrate. Folded and rolled antenna structures, which are transformed by the proposed planar antenna structure, are presented. Each antenna has a broadband impedance bandwidth that covers the PCS, UMTS, WiBro, WLAN and SDMB bands. Also, omni-directional radiation patterns over the operating bands have been obtained. The proposed antennas are suitable for mobile communication applications requiring a small antenna.     

低交叉极化高隔离的双极化天线

设计了一种应用于WLAN的具有低交叉极化和高隔离度的双极化天线.天线由3层功能层和2层介质基板间隔层叠而成.3层功能层分别为1个方形辐射贴片,2个带有发夹谐振器的馈电网络和1个刻蚀H形缝隙的接地板.发夹谐振器和辐射贴片构成一个二阶滤波天线用以展宽天线的带宽.通过在接地板上蚀刻H形缝隙降低了天线端口间的耦合电流,改善了天...     

加载高阻抗表面结构的超宽带陷波天线设计

本文设计了一种新型超宽带陷波天线.在超宽带微带单极子天线馈线两侧加载高阻抗表面单元,获得WiMAX频段陷波.在高阻抗表面单元上蚀刻阿基米德螺旋结构缝隙,使得单元尺寸比传统结构减小了55.2％.为了进一步在WLAN和WiMAX频段实现双陷波,将非对称的新型高阻抗表面单元加载至微带单极子天线馈线双侧.加工制作天线实物并进行...     

Aperture-coupled asymmetrical c-shaped slot microstrip antenna for circular polarisation

A novel aperture-coupled, asymmetrical C-shaped slot, square microstrip antenna is proposed for circular polarisation (CP). A narrow and asymmetrical C-shaped slot, microstrip antenna is fed at the centre using an aperture coupling to obtain a CP operation. The compactness of the antenna is easily obtained by inserting a C-shaped slot. Wide CP radiation is achieved simply by making the C-shaped slot asymmetrical. With this antenna, the measured 3 dB AR bandwidth is around 3.3% and the 10 dB return loss bandwidth achieved is 16.0%. The overall antenna size is 0.48λo x 0.48λo x 0.092λo at 2.4 GHz. The proposed slot microstrip patch technology is useful to design compact, broadband, circularly polarised antennas and arrays.     

Dual-broadband multistandard printed slot antenna with a composite back-patch

A square slot antenna fed by a coplanar waveguide for dual-band multistandard applications is presented. Printed on the back of the square slot is a composite patch formed by an annular metal ring inscribed by a circular patch. Appropriate design of the composite back-patch resulted in five resonant bands, the first (last) two of which were combined to form a lower (upper) operating band. The ratio of the two operating band centre frequencies can be tuned larger than 2.5. A pair of notches was embedded in the annular metal ring to further broaden the lower (upper) operating band up to a fractional bandwidth of 37% (20%). The measured results indicate that the proposed antenna can cover the frequency bands of the following wireless communication standards: digital communication system, personal communication services, universal mobile telecommunications system and 2.4/5-GHz wireless local-area networks.     

Th-Shaped Tunable Multi-Band Antenna for Modern Wireless Applications

A compact, reconfigurable antenna supporting multiple wireless services with a minimum number of switches is found lacking in literature and the same became the focus and outcome of this work. It was achieved by designing a Th-Shaped frequency reconfigurable multi-band microstrip planar antenna, based on use of a single switch within the radiating structure of the antenna. Three frequency bands (i.e., 2007–2501 MHz, 3660–3983 MHz and 9341–1046 MHz) can be operated with the switch in the ON switch state. In the OFF state of the switch, the antenna operates within the 2577–3280 MHz and 9379–1033 MHz Bands. The proposed antenna shows an acceptable input impedance match with Voltage Standing Wave Ratio (VSWR) less than 1.2. The peak radiation efficiency of the antenna is 82%. A reasonable gain is obtained from 1.22 to 3.31 dB within the operating bands is achieved. The proposed antenna supports Universal Mobile Telecommunication System (UMTS)-1920 to 2170 MHz, Worldwide Interoperability and Microwave Access (WiMAX)/Wireless Broadband/(Long Term Evolution) LTE2500–2500 to 2690 MHz, Fifth Generation (5G)-2500/3500 MHz, Wireless Fidelity (Wi-Fi)/ Bluetooth-2400 to 2480 MHz, and Satellite communication applications in X-Band-8000 to 12000 MHz. The overall planar dimension of the proposed antenna is 40 × 20 mm². The antenna was designed, along with the parametric study, using Electromagnetic (EM) simulation tool. The antenna prototype is fabricated for experimental validation with the simulated results. The proposed antenna is low profile, tunable, lightweight, cheap to fabricate and highly efficient and hence is deemed suitable for use in modern wireless communication electronic devices.     

Wi-Fi/WiMAX双极化阵列天线研究

提出一种应用于Wi-Fi/WiMAX的宽带高增益双极化阵列天线.它由+45°和-45°正交极化的两个天线组成。当频率为2.38~2.72 GHz时,天线的回波损耗大于-10 dB;端口1与端口2之间隔离度大于20 dB;端口1在2.45 GHz时获得最大增益为17.14 dBi,端口2在2.483 GHz时获得最大增益为17.15 dBi.仿真和测试很好相吻合,该双极化天线能满足Wi-Fi/WiMAX通信网络要求.     

CPW-fed ultra wideband slot antenna with arc-shaped stub

An ultra wideband coplanar waveguide (CPW) fed slot antenna is presented. A rectangular slot antenna is excited by a 50-CPW with an arc-shaped tuning stub. For the proposed antenna, the 210 dB return loss bandwidth could reach 15.6 GHz (3.7-19.3 GHz), which is about 135% with respect to the centre frequency of 11.5 GHz. Details of the antenna design, simulation and measured results on the return loss and the E-and H-plane radiation patterns of the proposed antenna are presented.     

Design of reconfigurable antennas based on an L-shaped slot and PIN diodes for compact wireless devices

A basic antenna structure to design pattern and pattern/frequency reconfigurable antennas is proposed. The structure consists of an L-shaped slot, PIN diodes, lumped capacitors and bias networks. The PIN diodes and the lumped capacitors located at specific positions are used to create short circuits across the slot. By carefully controlling these diodes, the induced current distribution around the slot can be changed, resulting in different antenna radiation patterns. Thus, a pattern reconfigurable antenna can be achieved. The proposed structure is then extended to design frequency/pattern reconfigurable antennas by introducing varactor diodes. Two compact reconfigurable antennas based on the proposed structure are designed and implemented to prove the design concepts. The experiment results fully demonstrated the performances of the proposed designs. Owing to the compact size and ease on manufacture, the proposed structure can be a promising solution in compact wireless devices such as smart phones and notebook computers.     

Super Compact UWB Monopole Antenna for Small IoT Devices

This article introduces a novel, ultrawideband (UWB) planar monopole antenna printed on Roger RT/5880 substrate in a compact size for small Internet of Things (IoT) applications. The total electrical dimensions of the proposed compact UWB antenna are 0.19 λ_o × 0.215 λ_o × 0.0196 λ_o with the overall physical sizes of 15 mm × 17 mm × 1.548 mm at the lower resonance frequency of 3.8 GHz. The planar monopole antenna is fed through the linearly tapered microstrip line on a partially structured ground plane to achieve optimum impedance matching for UWB operation. The proposed compact UWB antenna has an operation bandwidth of 9.53 GHz from 3.026 GHz up to 12.556 GHz at −10 dB return loss with a fractional bandwidth (FBW) of about 122%. The numerically computed and experimentally measured results agree well in between. A detailed time-domain analysis is additionally accomplished to verify the radiation efficiency of the proposed antenna design for the ultra-wideband signal propagation. The fabricated prototype of a compact UWB antenna exhibits an omnidirectional radiation pattern with the low peak measured gain required of 2.55 dBi at 10 GHz and promising radiation efficiency of 90%. The proposed compact planar antenna has technical potential to be utilized in UWB and IoT applications.