Pd-catalyzed hydrosilylation polymerization of a dihydrosilane with diyne/triyne mixed systems affording crosslinked silylene-divinylene polymers and their properties

Treatment of a dihydrosilane (methylphenylsilane, 1) with mixtures of a diyne (p- or m-diethynylbenzene, 2a or 2b) and a triyne (1,3,5-triethynylbenzene, 3a or B,B′,B″-triethynyl-N,N′,N″-trimethylborazine, 3b; 1:2:3=100:95:5, 100:90:10, 100:80:20) in the presence of Pd-PCy₃ (Cy=cyclohexyl) catalyst gave new crosslinked silylenedivinylene polycarbosilanes. In TGA the resulting crosslinked polymers tended to show higher Td₅ values and higher char yields than the corresponding linear polymers. On the other hand, UV/vis absorption spectra of the crosslinked polymers obtained in the reactions of 2a or 2b with 3a exhibited increased broad peaks around 390 nm for 2a or 360 nm for 2b. Coincidently, their fluorescence spectra showed significant increase of the emission peaks in 400-550 nm. The crosslinked polymer derived from 2a and 3b, however, showed decrease of the absorption peak around 390 nm and profound depression of fluorescence peaks in 400-550 nm.     

Paired electrochemical synthesis of new organosulfone derivatives

Electrochemical oxidation of “cathodically generated 4-aminocatechol (2)” has been studied in the presence of 4-toluenesulfinic acid (4a) and benzenesulfinic acid (4b) as nucleophiles in aqueous solutions, using cyclic voltammetry and controlled-potential coulometry. The results indicate that the o-benzoquinone derived from 4-aminocatechol (2) participates in Michael addition reaction with 4a or 4b to form the corresponding new organosulfone derivatives (5a and 5b). In this work we have proposed a mechanism for the electrode process. A Fe(CN)₆³⁻/Fe(CN)₆⁴⁻ redox mediator was used for the anodic oxidation of 4-aminocatechol (2) to the corresponding o-quinone 3. The indirect electrochemical process consists of a multi-step such as (a) cathodic reduction of 4-nitrocatechol (1) to 4-aminocatechol (2), (b) chemical oxidation of 4-aminocatechol (2) to 4-aminoquinone (3) with the resulting Fe(CN)₆³⁻, (c) the chemical reaction of 4-aminoquinone (3) with 4-toluenesulfinic acid (4a) or benzenesulfinic acid (4b), and (d) the anodic regeneration of Fe(CN)₆³⁻. The paired electrochemical synthesis of organosulfone derivatives (5a and 5b) has been successfully performed in an one-pot process at carbon rod electrode as a working and platinum as a counter electrode in an undivided cell.     

Spectrophotometric investigations and computational calculations of prototropic tautomerism and acid-base properties of some new azo dyes

The prototropic tautomerism in four novel azo compounds derived from pyrazolo[1,5-a]pyrimidin-7(4H)-one was intensively examined. Tautomeric structures which result from annular and azo-hydrazone tautomerism were exposed to semiempirical and density functional theory (DFT) calculations, allowing the recording of structural parameters, physicochemical properties and equilibrium constants to be recorded. The values of the equilibrium constants determined among the most stable forms clearly showed that compounds 1 and 2 co-exist in the NH and hydrazone forms. However, NH tautomers were strongly preferred to other forms in compounds 3 and 4. The observed electronic absorption bands were assigned and compared with the predicted transitions using a time-dependent DFT method (TDDFT). In all solvents employed, except for DMF and acetonitrile, compounds 1 and 2 exhibited azo-hydrazone tautomerism. However, the ionized species were predominant in highly polar solvents for compounds 3 and 4. In DMF, all the investigated dyes exist either in acid-base equilibrium or in the ionized form depending on the molecular structure. Hence, the values of the ionization constant (K_ion) and Gibbs free energy (ΔG) of the equilibrium existing in solution were calculated. In addition, the pK_a values of the investigated dyes were determined spectrophotometrically.     

Electrooxidation of 4-methylcatechol in the presence of barbituric acid derivatives

Electrooxidation of 4-methylcatechol (1) in the presence of 1,3-dimethylbarbituric acid (2a) and 1,3-diethylthiobarbituric acid (2b) as nucleophiles has been studied in detail by cyclic voltammetry and controlled-potential coulometry. The results indicate that 1 can be oxidized to its related o-benzoquinone (1a) and without conversion to its quinone methide tautomeric form, via an ECEC mechanism pathway, is converted to barbiturate derivatives (5a-b). The electrochemical synthesis of 5a-b have been successfully performed in one-pot in an undivided cell.     

Synthesis and properties of helical polyacetylenes containing carbazole

Novel acetylene monomers containing carbazole with chiral menthyl and bornyl groups, 9-(1R,2S,5R)-menthyloxycarbonyl-2-ethynylcarbazole (1), 9-(1S,2R,5S)-menthyloxycarbonyl-2-ethynylcarbazole (2), 9-(1R,2S,5R)-menthyloxycarbonyl-3-ethynylcarbazole (3) and 9-(1S)-bornyloxycarbonyl-2-ethynylcarbazole (4) were synthesized and polymerized with a Rh catalyst to give the corresponding polymers [poly(1)-poly(4)] with moderate M_n value of (11.5-92.2) × 10³ in good yields (77-89%). CD spectroscopic studies revealed that poly(1), poly(2) and poly(4) took predominantly one-handed helical structure in CHCl₃, THF, toluene, and CH₂Cl₂, while poly(3) did not. Addition of methanol to CHCl₃ solutions of poly(1) and poly(2) resulted in the formation of aggregates showing smaller CD signals at 275 and 320 nm. The helical structure of poly(1) and poly(2) was very stable against heating. The polymers emitted fluorescence in 0.40-2.90% quantum yields. Poly(4) exhibited an obvious oxidation peak at 1.10 V. The polymers were thermally stable below 300 °C.     

Synthesis and properties of ornithine- and lysine-based poly(N-propargylamides). Responsiveness of the helical structure to acids

Ornithine- and lysine-based novel N-propargylamides, N-α-tert-butoxycarbonyl-N-δ-fluorenylmethoxycarbonyl-l-ornithine-N′-propargylamide (1), N-α-tert-butoxycarbonyl-N-?-fluorenylmethoxycarbonyl-l-lysine-N′-propargylamide (2), N-α-fluorenylmethoxycarbonyl-N-δ-tert-butoxycarbonyl-l-ornithine-N′-propargylamide (3), and N-α-fluorenylmethoxycarbonyl-N-?-tert-butoxycarbonyl-l-lysine-N′-propargylamide (4) were synthesized and polymerized with a rhodium catalyst. Polymers with moderate molecular weights were obtained in good yields. Poly(1)-poly(4) showed strong Cotton effects in THF, whose sign and wavelength depended on the substituents. They were satisfactorily converted into the corresponding polymers [poly(1a)-poly(4a)] with free amino groups. Poly(1a) and poly(2a) also formed a helix, while poly(3a) and poly(4a) did not. Poly(1a) and poly(2a) decreased the CD intensity by the addition of m- and o-phthalic acids.     

Tyrosine-based poly(m-phenyleneethynylene-p-phenyleneethynylene)s. Helix folding and responsiveness to a base

The Sonogashira-Hagihara polymerization of 3′,5′-diiodo-N-α-tert-butoxycarbonyl-l-tyrosine methyl ester (1) and 3′,5′-diiodo-N-α-tert-butoxycarbonyl-O-methyl-l-tyrosine methyl ester (2) with para-diethynylbenzene (3) was carried out to obtain optically active poly(m-phenyleneethynylene-p-phenyleneethynylene)s [poly(1) and poly(2)] with M_n’s ranging from 9900 to 15,000 in 80-87% yields. Poly(1) exhibited intense CD signals in DMSO and THF, but did not in CH₂Cl₂, indicating that it took a predominantly one-handed helical conformation in the former two solvents. On the other hand, there was no evidence for poly(2) to take a helical structure in these solvents. Poly(1) turned the CD sign at 390 nm from plus to minus in DMSO/H₂O = 9/1 (v/v) by the addition of NaOH. Alkaline hydrolysis of ester moieties of poly(1) and poly(2) gave the corresponding polymers having carboxy groups [poly(1a) and poly(2a)]. Poly(1a) and poly(2a) increased the CD intensity by the addition of NaOH.     

Effects of internal linkage groups of fluorinated diamine on the optical and dielectric properties of polyimide thin films

To investigate the difference of the trifluoromethyl (CF₃) group and ether group affecting the optical property of fluorinated polyimides (PIs), we prepared 4,4′-bis(4-amino-2-trifluoromethylphenoxy)diphenyl ether (4) with three ether groups and 2,2-bis[4-(4-amino-2-trifluoromethylphenoxy)phenyl]hexafluoropropane (5) with four CF₃ groups with 2-chloro-5-nitrobenzotrifluoride and 4,4′-dihydroxydiphenyl ether or 2,2-bis(4-hydroxyphenol)hexafluoropropane. Two series of organosoluble and light-colored PIs (4a-4c, 5a-5c) were synthesized from 4 and 5 with various aromatic dianhydrides: 3,3,4,4-benzophenonetetracarboxylic dianhydride (BTDA) (a), 4,4-oxydiphthalic anhydride (ODPA) (b), and 4,4-hexafluoroisopropylidenediphthalic anhydride (6FDA) (c), prepared through a typical two-step polymerization method. These PIs were soluble in amide polar solvents and even in less polar solvents. The glass-transition temperatures (T_g) of 4a-5c were 221-249 °C and the 10% weight-loss temperatures were above 530 °C. Their films had cutoff wavelengths between 339 and 399 nm and yellowness index ranges from 1.95 to 42.60. The dielectric constants estimated from the average refractive indices are 2.59-2.93 (1 MHz). In a comparison of the PI series based on 4, 5, and 4,4′-bis(4-amino-2-trifluoromethylphenoxy)biphenyl (6), we found that the CF₃ group and ether group on the diamine had almost same effect in lowering the color, but the ether group had better thermal stability. The color intensity of the three PI series was lowered in the following order: 6 > 4 > 5. The PI 5c, synthesized from diamine 5 and dianhydride c, had six CF₃ groups in a repeated segment and ether group at the same time, so it exhibited the lightest color among the three series.     

The synthesis, spectroscopic properties and crystal structures of some rhodanine merocyanine dyes for optical recording with a blue diode laser

Six rhodanine merocyanine dyes were synthesized via both a conventional solvent method and a microwave method using rhodanine, 2-methylthio quaternary salts and 1H-indole-3-carbaldehyde as starting materials. The products were identified using UV-Vis, IR, MS, ¹H NMR and elemental analysis. The UV-Vis absorption spectra of the dyes in chloroform, DMSO, water, acetone, ethanol and methanol were investigated. The structures of two dyes (5a and 5b) were characterized and analyzed by X-ray diffraction as well. Crystallographic data revealed that dye 5a belonged to tetragonal, I4 (1)/a space group, while dye 5b belonged to monoclinic, P-1 space group. In the case of both dyes, intermolecular associations occurred by π-π stacking and intermolecular hydrogen bonds, which contributed to stabilize the crystal structure.     

Synthesis and gas permeation properties of various Si-containing poly(diarylacetylene)s and their desilylated membranes

Diarylacetylene monomers having trimethylsilyl groups and other substituents (substituted biphenyl, 1a and 1b; trimethylsilylmethylphenyl, 1c-e) were synthesized and polymerized with TaCl₅-n-Bu₄Sn catalyst to produce the corresponding poly(diarylacetylene)s (2a-d). Polymers 2a-c had high molecular weights and were soluble in common organic solvents. Free-standing membranes of 2a-c as well as previously reported 2f-h were prepared by the solution-casting method. Desilylation of these Si-containing polymer membranes was carried out with trifluoroacetic acid to afford 3a, 3b, and 3f-h. Upon desilylation, biphenyl-containing membranes became less permeable (3a, b), whereas fluorene-containing membranes became more permeable (3f-h). In particular, 3h exhibited extremely high gas permeability (PO₂ = 9800 barrers), which is about the same as that of poly(1-trimethylsilyl-1-propyne). Desilylated membranes 3a and 3f-h showed different gas permeability from that of polymers 2i-k which have the identical chemical structures and obtained directly by the polymerization of the corresponding monomers.     

Mechanistic study of electrochemical oxidation of o-dihydroxybenzenes in the presence of 4-hydroxy-1-methyl-2(1H)-quinolone: Application to the electrochemical synthesis

Electrochemical oxidation of o-dihydroxybenzenes (1a and 1b) has been studied in the presence of 4-hydroxy-1-methyl-2(1H)-quinolone (3) as a nucleophile in aqueous solution using cyclic voltammetry and controlled-potential coulometry. The results indicate that the o-quinones derived from o-dihydroxybenzenes (1a and 1b) participate in 1,4-(michael) addition reactions with 3 to form the corresponding new o-dihydroxybenzene derivatives (6a and 6b). We propose a mechanism for the electrode process. The efficient electrochemical synthesis of 6a and 6b has been successfully performed at carbon rod electrodes in an undivided cell in good yield and purity. The products have been characterized after purification by IR, ¹H NMR, ¹³C NMR and MS.     

A new facile electrochemical method for the synthesis of 4-(pyridine-2-ylthio)benzene-l,2-diols

Electrochemical oxidation of catechols (1a-1c) has been studied in the presence of 2-mercaptopyridine (3) as a nucleophile in water solution using cyclic voltammetry and controlled-potential coulometry. The results revealed that the quinones derived from catechols (1a-1c) participate in Michael addition reaction with 2-mercaptopyridine (3) and converted to the corresponding (pyridine-2-ylthio)benzene-l,2-diol derivatives (4a-4c), via an EC mechanistic pathway. The electrochemical synthesis of compounds 4a-4c has been successfully performed at a carbon rod electrode and in an undivided cell with good yields and high purity.     

Fluorescence sensors based on chiral polymer for highly enantioselective recognition of phenylglycinol

Chiral polymer P-1 incorporating (R,R)-salen-type unit was synthesized by the polymerization of (R,R)-1,2-diaminocyclohexane with 2,5-dibutoxy-1,4-di(5-tert-butylsalicyclaldehyde)-phenylene (M-1) via nucleophilic addition-elimination reaction, and chiral polymer P-2 incorporating (R,R)-salan-type unit could be obtained by the reduction reaction of P-1 with NaBH₄. The fluorescence response of two chiral polymers P-1 and P-2 on (R)- or (S)-phenylglycinol were investigated by fluorescence spectra. The fluorescence intensities of two chiral polymers P-1 and P-2 show gradual enhancement upon addition of (R)- or (S)-phenylglycinol and keeps nearly linear correlation with the concentration molar ratios of (R)- or (S)-phenylglycinol. But both P-1 and P-2 exhibited more sensitive response signals for (S)-phenylglycinol. The values of enantiomeric fluorescence difference ratio (ef) are 1.84 and 2.05 for P-1 and P-2, respectively. The results also showed that two chiral polymers P-1 and P-2 can also be used as fluorescence sensors for enantiomer composition determination of phenylglycinol.     

Electrochemical study of stable N-alkoxyarylaminyl radicals

The electrochemical study of N-tert-butoxy-2,4-diphenyl-6-tert-butylphenylaminyl (1a), N-tert-butoxy-2,4-bis(4-chlorophenyl)-6-tert-butylphenylaminyl (1b), N-[2-(methoxycarbonyl)-2-propyl]-2,4-diphenyl-6-tert-butylphenylaminyl (2), and N-tert-butoxy-2,4,6-tris(4-chlorophenyl)phenylaminyl radicals (3) was performed by cyclic voltammetry using acetonitrile as the solvent and Bu₄NPF₆ as the supporting electrolyte. On cathodic scan (100 mV/s), all the radicals gave chemically reversible cyclic voltammograms, and the were determined to be −1.405 V (1a), −1.310 V (2a), −1.282 V (2b), and −1.195 V (3) (versus Fc⁺/Fc), respectively. On anodic scan (100 mV/s), on the other hand, 1a, 1b and 2 showed chemically reversible cyclic voltammograms, but 3 exhibited a partially reversible couple even on a scan rate of 500 mV/s, indicating that the cation species of 3 was less stable. The determined for 1a, 1b, 2 and 3 were 0.220, 0.280, 0.318 and 0.294 V (versus Fc⁺/Fc), respectively. The electrochemical data were compared with those of thioaminyl radicals, the corresponding sulfur analogues of 1-3.     

Polybinaphthyls incorporating chiral 2,2′-binaphthyl and isoquinoline moieties by Sonogashira reaction

Polymers P-1, P-2, P-3, P-4 and P-5 were synthesized by the polymerization of 5,8-bis(ethynyl)isoquinoline (M-1) with (R)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((R)-M-2), (S)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((S)-M-2), (R)-6,6′-dibromo-2,2′-bisbutoxy-1,1′-binaphthyl ((R)-M-3), (S)-6,6′-dibromo-2,2′-bisbutoxy-1,1′-binaphthyl ((S)-M-3), and rac-6,6′-dibromo-2,2′-bisbutoxy-1,1′-binaphthyl (M-4) under Sonogashira reaction, respectively. Both monomers and polymers were analyzed by NMR, MS, FT-IR, UV-vis spectroscopy, DSC-TGA, fluorescence spectroscopy, GPC and circular dichroism (CD) spectroscopy. CD spectra of polymers P-1 and P-2, P-3 and P-4 are almost identical except that they gave opposite signals at each wavelength. The long wavelength CD effect of P-1 and P-2 can be regarded as the more extended conjugated structure in the repeating unit and the helical backbone in the polymer chain. All five polymers have strong blue-green fluorescence due to the efficient energy migration from the extended π-electronic structure of the repeating unit of the polymers to the chiral binaphthyl core and are expected to provide understanding of structure-property relationships of the chiral conjugated polymers.     

Mechanistic study of electrochemical oxidation of catechols in the presence of 4-hydroxy-1-methyl-2(1H)-quinolone: Application to the electrochemical synthesis

Electrochemical oxidation of catechols (1a-1c) has been studied in the presence of 4-hydroxy-1-methyl-2(1H)-quinolone (3) as a nucleophile in aqueous solution using cyclic voltammetry and controlled-potential coulometry. The results indicate that the quinones derived from catechols (1a-1c) participate in Michael addition reactions with 3 to form the corresponding benzofuran (or isochromeno[4,3-c]quinoline) derivatives (6a-6c). The electrochemical synthesis of (6a-6c) has been successfully performed in an undivided cell in good yield and purity. The oxidation mechanism was deduced from voltammetric data and by coulometry at controlled-potential. The products have been characterized after purification by IR, ¹H NMR, ¹³C NMR and MS.     

Novel poly(diphenylacetylene)s with both alkyl and silyl groups as gas permeable membranes: Synthesis, desilylation, and gas permeability

Diphenylacetylenes having a dimethyloctylsilyl group and an alkyl group at para positions [Me₂n-C₈H₁₇SiC₆H₄CCC₆H₄R; R = H (1a), i-Pr (1b), t-Bu (1c), n-Bu (1d)] and having only an alkyl group [PhCCC₆H₄R; R = i-Pr (1B), t-Bu (1C)] were synthesized and then polymerized with TaCl₅/n-Bu₄Sn catalyst to provide the corresponding poly(diphenylacetylene)s (2a, 2b, 2c, 2d, 2B, and 2C). The formed polymers afforded tough free-standing membranes by casting from toluene solutions. Desilylation reaction of Si-containing membranes (2a-d) was carried out with trifluoroacetic acid to give the desilylated membranes (3a-d). The permeability of these membranes to O₂, N₂, and CO₂ were determined. All the Si-containing membranes exhibited almost the same gas permeability. The desilylation of Si-containing membranes of 2a-c resulted in large increase of gas permeability. No apparent increasing of gas permeability was observed in the desilylation of 2d. To clarify the effects of desilylation, CO₂ diffusivity (D(CO₂)), CO₂ solubility (S(CO₂)), and fractional free volume (FFV) of the polymer membranes were investigated. The S(CO₂) values of desilylated membranes were much larger than that of Si-containing counterparts. The D(CO₂) and FFV of membranes of 2a-c increased through desilylation. The desilylated membrane of 3d had small D(CO₂) value and almost the same FFV compared with 2d. Further, the comparison of the permeability between three types of membranes with the same chemical structure revealed that the microvoids were not generated by the desilylation of membranes of poly(diphenylacetylene)s containing alkyl groups.     

A facile galvanostatic method for the synthesis of quinoxalinediones

Electrochemical oxidation of catechols (1a-d) has been studied in the presence of N,N-dimethylethylendiamine (3) as a nucleophile in aqueous solutions, using cyclic voltammetry, constant-current coulometry and controlled-potential coulometry. The results indicate that the quinones derived from catechols (2a-d) participate in Michael addition reactions with N,N′-dimethylethylendiamine (3) via the ECECE mechanism to form the corresponding quinoxalinedione derivatives (6a-c).