The effect of ZIF-90 particle in Pebax/Psf composite membrane on the transport properties of CO2, CH4 and N2 gases by Molecular Dynamics Simulation method

Nowadays, mixed matrix membranes (MMMs) have considered by many researchers to overcome the problems of polymeric membranes. In addition, molecular dynamics (MD) and Monte Carlo (MC) simulation Methods are suitable tools for studying transport properties and morphology in MMMs. For this purpose, in this study using material studio 2017 (MS) software, the transport properties of CO₂, CH₄ and N₂ in Pebax, Psf neat Pebax/Psf composite and Pebax/Psf composite filled with ZIF-90 particles have been investigated. By adding Psf to Pebax matrix, the selectivity of CO₂/CH₄ and CO₂/N₂ gases has significantly increased. In addition, adding ZIF-90 particles to the Pebax/Psf composite increased the permeability of CO₂, CH₄ and N₂ compared to neat and composite membranes. The morphological properties of the membranes, such as the fractional free volume (FFV), radial distribution function (RDF), glass transition temperature (T_G), X-ray diffraction (XRD) and equilibrium density have calculated and acceptable results have obtained.     

High speed spin coating in fabrication of Pebax 1657 based mixed matrix membrane filled with ultra-porous ZIF-8 particles for CO<Subscript>2</Subscript>/CH<Subscript>4</Subscript> separation

Modified ultra-porous ZIF-8 particles were used to prepare novel ZIF-8/Pebax 1657 mixed matrix membranes (MMMs) on PES support for separation of CO₂ from CH₄ using spin coating method. TEM and SEM were used to characterize modified ZIF-8 particles. SEM was also used to investigate the morphology of synthesized MMMs. The MMMs with thinner selective layer showed higher CO₂ permeability and lower CO₂/CH₄ selectivity in permeation tests compared to MMMs with thicker selective layer. The plasticization was recognized as the main reason for rise in CO₂ permeability and drop in CO₂/CH₄ selectivity of thinner MMMs. The gas sorption results showed that the high permeability of CO₂ in MMMs is mainly due to the high solubility of this gas in MMMs, leading to high CO₂/CH₄ solubility selectivity for MMMs. The fractional free volume and void volume fraction of MMMs increased as the thickness of membrane decreased. Applying higher mixed feed pressures and permeation tests temperatures resulted in increase in CO₂ permeability and decrease in CO₂/CH₄ selectivity. At highest testing temperature (60 °C), the CO₂ permeability of synthesized MMMs with thinner selective layer remarkably increased.     

Improved CO2/CH4 separation performance of mixed-matrix membrane by adding ZIF-7-NH2 nanocrystals

Membrane-based technology is an attractive alternative in terms of CO₂ separation. Pebax-based membranes are regarded as potential candidates for CO₂ separation due to the favorable interaction between its poly (ethylene oxide) chains with CO₂ molecules and inorganic fillers. However, the separation performance for CO₂/CH₄ mixture is still suffered from the moderate gas permeability and selectivity. To overcome this problem, in this work, amino-functionalized zeolite imidazolate framework (ZIF-7-NH₂) nanocrystals were used as fillers to blend with Pebax 1657 for fabricating mixed-matrix membranes (MMMs). XRD, Brunauer–Emmett–Teller (BET), scanning electron microscope, and ¹H nuclear magnetic resonance characterization indicated that ZIF-7-NH₂ with the highest crystallinity was synthesized. Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry (DSC), and Young's modulus showed that it has good interfacial interaction. Gas separation test results showed that both the CO₂ permeability and CO₂/CH₄ selectivity of the 31 wt% ZIF-7-NH₂/Pebax MMMs increased by 80 and 170%, respectively. The improved performance is attributed to the addition of ZIF-7-NH₂ nanocrystals and the favorable interfacial interactions between the polymer and ZIF-7-NH₂ nanocrystals. Furthermore, the polyvinylidene fluoride supported hollow fiber composite membranes also exhibit the long-term stability for CO₂/CH₄ separation.     

Pebax-based mixed matrix membranes loaded with graphene oxide/core shell ZIF-8@ZIF-67 nanocomposites improved CO2 permeability and selectivity

In order to facilitate CO₂ transport in Pebax-based membranes, graphene oxide (GO)/core shell ZIF-8@ZIF-67 nanocomposites were loaded in Pebax copolymer to improve CO₂ permeability and selectivity. The 0.5 wt% GO doped core shell ZIF-8@ZIF-67, which gave highest CO₂ adsorption capacity of 1.12 mmol/g, was used as nanocomposite. The incorporated GO/core shell ZIF enhanced CO₂ adsorption via unsaturated metal sites (Zn-O or Co-O), because O atoms in GO substituted for N atoms coordinated with Zn and Co single atoms in core shell ZIF-8@ZIF-67. Positron annihilation lifetime spectroscopy indicated that GO-templated core shell ZIF nanocomposites generated extra free volume and provided low-resistance channels to facilitate CO₂ transport. Fourier transform infrared spectroscopy analysis revealed that hydrogen bonds were generated between Pebax polymer chains and GO-templated core shell ZIF which improved swelling resistance and reduced interface defects. Therefore, Pebax-based MMMs loaded with 5 wt% GO/core shell ZIF-8@ZIF-67 exhibited optimum CO₂ permeability (173.2 barrers) and ideal selectivity of CO₂/N₂ (61.9) and CO₂/H₂ (11.6), which were 99.7%, 66.4%, and 20.8% higher than Pebax membranes and surpass Robeson 2008 upper bound. The tensile strength increased by 17.6% to 28.8 MPa and elongation at break increased by 7.61%–554.6% when pure Pebax membranes were incorporated with 2.5 wt% GO/core shell ZIF-8@ZIF-67.     

Effect of graphene oxide on the behavior of poly(amide‐6‐b‐ethylene oxide)/graphene oxide mixed‐matrix membranes in the permeation process

Polyether‐block‐amide (Pebax)/graphene oxide (GO) mixed‐matrix membranes (MMMs) were prepared with a solution casting method, and their gas‐separation performance and mechanical properties were investigated. Compared with the pristine Pebax membrane, the crystallinity of the Pebax/GO MMMs showed a little increase. The incorporation of GO induced an increase in the elastic modulus, whereas the strain at break and tensile strength decreased. The apparent activation energies (E_p) of CO₂, N₂, H₂, and CH₄ permeation through the Pebax/GO MMMs increased because of the greater difficulty of polymer chain rotation. The E_p value of CO₂ changed from 16.5 kJ/mol of the pristine Pebax to 23.7 kJ/mol of the Pebax/GO MMMs with 3.85 vol % GO. Because of the impermeable nature of GO, the gas permeabilities of the Pebax/GO MMMs decreased remarkably with increasing GO content, in particular for the larger gases. The CO₂ permeability of the Pebax/GO MMMs with 3.85 vol % GO decreased by about 70% of that of the pristine Pebax membrane. Rather than the Maxwell model, the permeation properties of the Pebax/GO MMMs could be described successfully with the Lape model, which considered the influence of the geometrical shape and arrangement pattern of GO on the gas transport. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42624.     

PBI/Clinoptilolite mixed-matrix membranes for binary (N2/CH4) and ternary (CO2/N2/CH4) mixed gas separation

In this work, polybenzimidazole (PBI)-based mixed matrix membranes (MMMs) with natural zeolite were prepared and their transport properties for binary (N₂/CH₄) and ternary (CO₂/N₂/CH₄) mixed-gas separation were studied. The MMMs, were prepared with PBI as polymeric matrix and Mexican natural zeolite clinoptilolite enriched with cations of Ca²⁺ as filler. The thermal properties analysis of the PBI and MMMs studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) indicates that the MMMs membranes have Tg higher than 350°C and decomposition temperatures above 600°C compared with the pristine membranes. PBI membrane and MMMs were analyzed by X-Ray Diffraction (XRD) and the diffraction patterns showed the zeolite signals combine with the amorphous dome from the polymeric matrix. In addition, the perm-selectivity properties of the polymeric membranes and MMMs were tested with binary (N₂/CH₄; 10/90 mol%) and ternary (CO₂/N₂/CH₄; 5/10/85 mol%) gas mixtures at different pressure rates (50, 150 and 300 psi). The perm-selectivity properties of the MMMs membranes show an improvement in their values about 30% higher compared to the PBI polymeric membranes, favoring the permeation of CO₂ and N₂.     

Preparation and characterization of CO2-selective Pebax/NaY mixed matrix membranes

CO₂-selective Pebax/NaY mixed matrix membranes (MMMs) were prepared by incorporating NaY zeolite into Pebax matrix. The morphology, chemical groups, thermal stability, and microstructure of the MMMs were investigated by scanning electron microscope, Fourier transform infrared spectroscopy, thermogravimetric analysis, and X-ray diffraction, respectively. The effects of zeolite loading amount, permeation temperature and pressure on the CO₂/N₂ separation performance of the resultant membranes were studied. The as-prepared MMMs are much superior to the pristine Pebax membranes in terms of permeability and selectivity. The CO₂ permeability and CO₂/N₂ selectivity can respectively reach to 131.8 Barrer and 130.8 for MMMs made by the starting materials containing 40 wt % NaY. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48398.     

Effects of halloysite nanotubes on the morphology and CO2/CH4 separation performance of Pebax/polyetherimide thin-film composite membranes

Enhancing the performance of gas separation membranes is one of the major concerns of membrane researchers. Thus, in this study, poly(ether-block-amide) (Pebax)/polyetherimide (PEI) thin-film composite membranes were prepared and their CO₂/CH₄ gas separation performance was investigated by means of pure and mixed gases permeation tests. To improve the properties of these membranes, halloysite nanotubes (HNT) were added to Pebax layer at different loadings of 0.5, 1, 2, and 5 wt % to form Pebax-HNT/PEI membranes. Scanning electron microscopy, gas sorption, X-ray diffraction, Fourier-transform infrared, and differential scanning calorimetry tests were also performed to investigate the impact of HNT on structure and properties of prepared membranes. Results showed that both CO₂/CH₄ selectivity and CO₂ permeance increased by adding HNT to Pebax layer up to 2 wt %. By increasing HNT loading to 5 wt %, the CO₂/CH₄ selectivity decreased from 32 to 18, while CO₂ permeance increased from 3.25 to 4.2 GPU. Pebax/PEI and Pebax-HNT/PEI membranes containing 2 wt % of HNT were tested using CO₂/CH₄ gas mixtures at different feed CO₂ concentrations and feed pressure of 4 bar. The results showed that with increasing CO₂ concentration from 20 to 80 vol %, CO₂/CH₄ selectivity of Pebax/PEI composite membranes increased by 19%, while, in Pebax-HNT/PEI membrane, CO₂/CH₄ selectivity decreased by 40%. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48860.     

Study the effects of Cloisite15A nanoclay incorporation on the morphology and gas permeation properties of Pebax2533 polymer

In this study, mixed matrix membranes (MMMs) were prepared using commercially available poly(ether‐b‐amide) (Pebax2533) as polymer matrix and organically modified montmorillonite (OMMt) as filler with the aim of investigating their gas permeation properties. The prepared membranes were characterized by Fourier‐transform infrared (FTIR) spectroscopy, X‐ray diffraction (XRD), scanning electron microscope (SEM), thermal gravimetric analysis, and tensile strength analyses. Gas permeation properties of all the prepared membranes were evaluated at different pressures and clay loadings. Results of FTIR and SEM confirmed the appropriate adhesion between polymer and nanoclays so that no void formation was observed in the polymer/clay interface. XRD results showed that in low loading, clay dispersion occurred as exfoliated‐intercalated and at high loading as intercalated‐phase separated. Results of gas permeation test showed that by adding layered and impermeable clay particles to the polymer matrix, the permeation of soluble CO₂ gas reduced by 28% for the highest clay loading. By increasing of pressure from 2 to 6 bar, CO₂/CH₄ permselectivity increased at all nanoclay loadings. The highest CO₂/CH₄ selectivity was obtained for 6 wt % clay MMM at all pressures, while the highest CO₂/H₂ selectivity was achieved for neat polymer at 6 bar. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45302.     

Synthesis and characterization of poly(ether-<Emphasis Type="Italic">block</Emphasis>-amide) copolymers/multi-walled carbon nanotube nanocomposite membranes for CO<Subscript>2</Subscript>/CH<Subscript>4</Subscript> separation

One of the effective techniques for improving separation properties of polymeric membranes is incorporation of suitable nanoparticles into their matrices. This study presents the preparation of three types of nanocomposite membranes comprising three grades of poly (ether-block-amide) (Pebax 1074, Pebax 1657 and Pebax 2533) and modified multi-walled carbon nanotubes (MWCNTs) with different loadings (1, 1.5, 2 and 2.5 wt%). The prepared membranes were characterized by field emission scanning electron microscopy (FESEM), attenuated total reflection-Fourier transfer infrared spectroscopy (ATR-FTIR) and X-ray diffraction (XRD). Permeation of CO₂ and CH₄ gases through the prepared membranes was measured at the pressure range of 2-8 bars and 25 °C. The results showed that the incorporation of MWCNTs into the polymers matrices improves CO₂/CH₄ selectivity. Further, Pebax 1074/MWCNT nanocomposite membrane exhibits better performance for CO₂/CH₄ separation compared to the neat Pebax and the two other nanocomposite membranes.     

Preparation and Characterization of Polycarbonate-Blend-Raw/Functionalized Multi-Walled Carbon Nano Tubes Mixed Matrix Membrane for CO2 Separation

Membrane composed of PC as base of polymer matrix with different ratio of multiwall carbon nano tubes (MWCNTs) as nanofillers and poly ethylene glycol (PEG) as second polymer was prepared by solution casting method. Both raw-MWCNTs (R-MWCNTs) and functionalized carboxyle-MWCNTs (C-MWCNTs) were used in membrane preparation. The MWCNTs loading ratio and pressure effects on the gas transport properties of membranes were examined in relation to pure He, N₂, CH₄, and CO₂ gases. Results showed that the use of C-MWCNT instead of R-MWCNTs in mixed matrix membranes (MMMs) fabrication with base of PC provides better performance and also it increases (CO₂/CH₄) and (CO₂/N₂) selectivities to 27.38 and 25.42 from 25.45 and 19.24, respectively (at 5 wt% of MWCNTs). PEG as the second rubbery polymer was utilized to improve the separation performance and mechanical properties. In blend MMMs, highest (CO₂/CH₄) selectivity at 2 bar pressure increased to 35.64 for PC/PEG/C-MWCNT blend MMMs which was 27.28 for PC/MWCNTs MMMs at 10 wt%. Increase of feed pressure led to gas permeability and gas pair selectivity improvement in approximately all of membranes. Analysis of mechanical properties showed improvement in tensile modules with the increase of MWCNTs loading ratio and use of PEG in prepared MMMs.     

Synthesis,characterization, and gas separation performances of polysulfone and cellulose acetate-based mixed matrix membranes

ABSTRACT

The combination of polymeric and inorganic fillers inside mixed matrix membranes (MMMs) becomes a hot research topic due to the gas permeability-selectivity trade-off in polymeric membranes. Until recently, the problem of voids hampers the real application of MMMs, hence deep understanding on polymer-particle compatibility is required. This study focuses on the synthesis and characterization of polysulfone and cellulose acetate-based MMMs that combined with ZIF-8 and TiO₂ particles. ZIF-8 dispersed more uniform than TiO₂. The crystallinity of MMMs was higher than pure polymeric membrane. In addition, micro voids in MMMs resulted a slight decrease in CO₂/N₂ selectivity (from 15 to 12).     

Mixed matrix membranes of Pebax1657 loaded with iron benzene‐1,3,5‐tricarboxylate for gas separation

Mixed matrix membranes offer major advantages in gas separation processes due to desirable properties found in both organic and inorganic membranes. In this study, a novel mixed matrix membrane was prepared for such application by incorporating iron benzene‐1,3,5‐tricarboxylate (Fe‐BTC) into the poly(amide‐6‐b‐ethylene oxide) (Pebax1657) polymer. Membranes with various loadings of 5, 10, and 20 wt% Fe‐BTC in the polymer matrix were fabricated to investigate the effect of filler loading on the membrane performance. Membranes, prepared by solution‐casting were characterized by scanning electron microscopy, thermogravimetric analysis, Fourier transform infrared, X‐ray diffraction, and tensile test. Pure gas separation of CO₂, CH₄, and N₂ and ideal gas selectivity of CO₂/CH₄ and CO₂/N₂ were performed and permeation tests were carried out under 4, 8, and 12 bar pressures. Results show that adding Fe‐BTC into the Pebax1657 matrix improved both permeability and selectivity of the filled membranes. For instance, 10 wt% loading of Fe‐BTC into the Pebax1657 matrix led to CO₂ permeability increase of 49% as well as CO₂/CH₄ and CO₂/N₂ selectivities enhancements of about 36% and 16%, respectively. POLYM. COMPOS., 38:1363–1370, 2017. © 2015 Society of Plastics Engineers     

Prestructured MXene fillers with uniform channels to enhance CO2 selective permeation in mixed matrix membranes

The packing pattern of two-dimensional (2D) sheet-like fillers in membranes is relatively random, leading to the unfavorable permeability from tortuous diffusion pathway. A new strategy that using prestructured materials with uniform channels as fillers was proposed. In this work, Ti₃AlC₂ is etched to prepare multilayered MXene (m-MXene), the channels aggregate as a whole unit, ensure the impossibility of ineffective packing compared with traditional individual sheets, largely facilitating the selective permeation. Then, the m-MXene/Poly (amide-6-b-ethylene oxide) (Pebax) MMMs are synthesized. SEM images demonstrate the accordion shaped structure of filler, which is the multi-channels laminates. Furthermore, the results of gas permeation test exhibit enhanced performance of m-MXene/Pebax MMMs. MMM with 0.5 wt.% m-MXene behaved best, CO₂ permeability of 86.22 Barrer as well as CO₂/N₂ selectivity of 104.85, transcending the Robeson upper bound (2008). Having distinct enhancement for CO₂ separation, the m-MXene/Pebax MMMs in this work offer prospective practical applications.     

Effect of support layer on gas permeation properties of composite polymeric membranes

PES/Pebax and PEI/Pebax composite membranes were prepared by coating the porous PES and PEI substrate membranes with Pebax-1657. The morphology and performance of the prepared membranes were investigated by SEM and CO₂ and CH₄ permeation tests. The CO₂ permeances of 28 and 52 GPU were achieved for PES/Pebax and PEI/Pebax composite membranes, respectively, with CO₂/CH₄ selectivities almost equal to that of Pebax (26). The experimental data were further subjected to a theoretical analysis using the resistance model. It was found that the porosity and the thickness of the dense section of PES substrate were an order of magnitude higher than those of PEI substitute. The porosity/thickness ratio of PEI substrate was, however, higher than PES, explaining the higher permeance of PEI/Pebax composite membrane. Substrates with porosities much higher than the Henis-Tripodi gas separation membrane were used in this work, aiming to achieve the selectivity of Pebax, rather than those of the substrate membrane materials.     

Polyurethane-SAPO-34 mixed matrix membrane for CO2/CH4 and CO2/N2 separation

SAPO-34 nanocrystals (inorganic filler) were incorporated in polyurethane membranes and the permeation properties of CO₂, CH_4, and N₂ gases were explored. In this regard, the synthesized PU-SAPO-34 mixed matrix membranes (MMMs) were characterized via SEM, AFM, TGA, XRD and FTIR analyses. Gas permeation properties of PU-SAPO-34 MMMs with SAPO-34 contents of 5 wt%, 10 wt% and 20 wt% were investigated. The permeation results revealed that the presence of 20 wt% SAPO-34 resulted in 4.45%, 18.24% and 40.2% reductions in permeability of CO_2, CH_4, and N₂, respectively, as compared to the permeability of neat polyurethane membrane. Also, the findings showed that at the pressure of 1.2 MPa, the incorporation of 20 wt% SAPO-34 into the polyurethane membranes enhanced the selectivity of CO₂/CH₄ and CO₂/N₂, 14.43 and 37.46%, respectively. In this research, PU containing 20 wt% SAPO-34 showed the best separation performance. For the first time, polynomial regression (PR) as a simple yet accurate tool yielded a mathematical equation for the prediction of permeabilities with high accuracy (R² > 99%).     

Efficient CO2 Separation Using a PIM-PI-Functionalized UiO-66 MOF Incorporated Mixed Matrix Membrane in a PIM-PI-1 Polymer

Metal–organic framework (MOF) incorporated mixed–matrix membranes (MMMs) attract great interest for gas separation applications because they overcome limitations faced by typical polymer membranes, including permeability–selectivity trade-off, aging effect, and plasticization phenomenon. However, optimal MOF–polymer interface compatibility is the key challenge in fabricating defect-free high-performance gas-separation MMMs. Here, a surface modification strategy of the UiO-66-NH₂ MOF using a covalently bound PIM-PI-oligomer is developed to engineer interface compatibility with the polymer that has an identical chemical structure (PIM-PI-1) in the MMMs. A series of MMMs are prepared with different loadings of homogeneously distributed PIM-PI-functionalized MOFs (PPM). Significant improvements in CO₂/N₂ and CO₂/CH₄ selectivity and permeability are achieved with these MMMs, ranging from 5 to 10 wt% of the PPM loadings. The MMM with 10 wt% loading (PPM-10@MMM) shows a CO₂ permeability of 3827.3 Barrer and a CO₂/N₂ and CO₂/CH₄ selectivity of 24 and 13.4, respectively. This surpasses the 2008 Robeson upper bound for CO₂/N₂ and is very close to the 2008 upper bound for CO₂/CH₄. The experimental results are further compared using Maxwell's equation for MMMs. The resulting MMMs show a plasticization resistance against CO₂ up to 25 atm pressure and anti-aging performance for 180 h.     

Pebax–polydopamine microsphere mixed‐matrix membranes for efficient CO2 separation

Novel facilitated‐transport mixed‐matrix membrane (MMM) were prepared through the incorporation of polydopamine (PDA) microspheres into a poly(amide‐b‐ethylene oxide) (Pebax MH 1657) matrix to separate CO₂–CH₄ gas mixtures. The Pebax–PDA microsphere MMMs were characterized by Fourier transform infrared spectroscopy, scanning electron microcopy, X‐ray diffraction, differential scanning calorimetry, and thermogravimetric analysis. The PDA microspheres acted as an adhesive filler and generated strong interfacial interactions with the polymer matrix; this generated a polymer chain rigidification region near the polymer–filler interface. Polymer chain rigidification usually results in a larger resistance to the transport of gas with a larger molecular diameter and a higher CO₂–CH₄ selectivity. In addition, the surface of PDA microspheres contained larger numbers of amine, imine, and catechol groups; these were beneficial to the improvement of the CO₂ separation performance. Compared with the pristine Pebax membrane, the MMM with a 5 wt % PDA microsphere loading displayed a higher gas permeability and selectivity; their CO₂ permeability and CO₂–CH₄ selectivity were increased by 61 and 60%, respectively, and surpassed the 2008 Robeson upper bound line. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44564.     

High gas permselectivity in ZIF-302/polyimide self-consistent mixed-matrix membrane

Zeolitic imidazolate framework-302 (ZIF-302) was incorporated within a polyimide (PI) matrix in order to develop a highly selective and permeable mixed-matrix membrane (MMM) for gas separation processes. On the basis of varying fabrication procedures, two different MMMs were formed: a dense MMM (ZIF-302/d-PI) and a spongy, self-consistent MMM (ZIF-302/s-PI). The spongy membrane was shown to have self-consistent and disconnected pores with a reduction in overall membrane density. For ZIF-302/d-PI, a 1.2–1.5-fold increase in the permeability of H₂, O₂, N₂, CO₂, and CH₄ was observed when compared with the pure d-PI membrane. For ZIF-302/s-PI, even better improvements (up to 19-fold higher) in permeance were achieved with negligible effects on selectivity. The gas transport mechanism was then analyzed and showed a considerable enhancement of diffusion coefficients for ZIF-302/s-PI, while ideal gas pair selectivities for CO₂/N₂, H₂/CH₄, and H₂/N₂ were found to be 24.8, 42.3, and 62.6, respectively. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48513.     

Performance evaluation of a synthesized and characterized Pebax1657/PEG1000/γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> membrane for CO<Subscript>2</Subscript>/CH<Subscript>4</Subscript> separation using response surface methodology

In this work, the response surface methodology (RSM) based on the central composite design (CCD) was used to examine effects of different gamma alumina (γ-Al₂O₃) loadings (0 to 8 wt.%) and various polyethylene glycol 1000 (PEG1000) contents (0 to 40 wt.%) as parameters on membrane preparation. Accordingly, pure carbon dioxide (CO₂) and methane (CH₄) gasses permeability and ideal CO₂/CH₄ selectivity values were considered as responses. Poly (ether block amide) 1657 (Pebax1657) was used as the base polymer matrix for the membranes fabrication. The neat Pebax1657 membrane was prepared via solution casting-solvent evaporation method and the other membranes were prepared via solution blending technique. Analysis of variance (ANOVA) was used to analyze the experiments statistically and the results indicated that the optimized amounts of γ-Al₂O₃ nanoparticles and PEG1000 in order to enhance both CO₂ permeability and ideal CO₂/CH₄ selectivity were 8 wt.% and 10 wt.%, respectively. Additionally, a comparison between the separation performance of the neat membrane, the nanocomposite membrane with the optimum amount of γ-Al₂O₃ nanoparticles, the blended membrane with optimum amounts of PEG1000, and the blended nanocomposite membrane with optimum amounts of γ-Al₂O₃ nanoparticles and PEG1000 was presented. The obtained gas permeation results showed that the blended nanocomposite membrane exhibits the highest CO₂/CH₄ separation performance compared to the neat Pebax membrane.