Fe3O4/聚苯乙烯磁性微球的合成与表征

用化学共沉淀法合成了Fe3O4纳米微粒,并用双层表面活性剂对其进行表面修饰,得到了以水和乙醇为分散介质的磁流体。在磁流体的存在下,用改进的乳液聚合方法合成了Fe3O4/聚苯乙烯磁性微球。X射线衍射研究表明,Fe3O4纳米微粒的平均粒径约为10 nm;在透射电镜下观察磁性微球的粒径在140 nm左右;并用红外光谱和热失重方法表征了复合微球的化学成分及其所含Fe3O4的百分数。阐述了双层表面活性剂改性的机理,并对聚合过程中单体、磁流体及引发剂的用量的影响进行了讨论。     

交联聚合物磁性复合微球的制备与性能研究

由共沉淀法制备磁性FeaO4纳米颗粒,并用油酸钠对其表面进行改性,得到了平均直径为12.7nm的油基Fe3O4纳米颗粒.在该纳米颗粒存在的条件下,通过分散共聚制得了内部为Fe3O4,外层为二乙烯基苯(DVB)交联的聚丙烯酸-co-聚甲基丙烯酸甲酯(PAA-co-PMMA)磁性复合微球.研究了介质乙醇/水的比例、引发剂、分散剂、交联剂用量对形成复合微球的影响,得出了制备复合微球的优化实验条件,并对复合微球的结构、形态、尺寸及磁含量进行了考察.     

磁性高分子复合微球的制备

通过选用含有乙烯基的有机硅烷偶联剂对自制的纳米Fe3O4进行表面修饰后,采用悬浮聚合法成功制备了单分散磁性高分子复合微球,并重点研究了分散剂浓度、搅拌速度、磁含量等因素对制备的磁性高分子复合微球的影响.结果表明,合适的分散剂浓度和搅拌速度可以获得球径分布良好的磁性高分子复合微球,微球的磁感应强度可以通过改变Fe3O4磁性粒子的含量进行调节.     

纳米Fe3O4/聚苯胺复合粒子的制备及其磁性能研究

用水解沉淀法制备纳米Fe3O4,然后在其溶液中原位合成聚苯胺,得到纳米Fe3O4/聚苯胺复合粒子.通过XRD、TEM、JDM等测试对纳米复合粒子的形态、结构及磁性能进行了研究.实验制备的纳米Fe3O4粒子粒径为30nm左右,在其表面沉积聚苯胺后,复合粒子的粒径达到了50nm左右.与纳米Fe3O4粒子相比,纳米Fe3O4/聚苯胺复合粒子的XRD峰形变得更为明锐.纳米复合粒子的磁性能表现出软磁性,与纳米Fe3O4粒子相比,矫顽力减小为0,这可以大大减小材料的磁滞损耗和退磁难度,性能得到改善.     

PEI-b-PLA/Fe_3O_4磁性复合微球的制备及其性能表征

分别采用化学共沉淀法和开环聚合法合成了Fe3O4纳米粒子和星状聚合物PEI-b-PLA,然后采用自组装的方法合成了磁性复合微球PEI-b-PLA/Fe3O4。扫描电镜分析表明磁性复微球的粒径约为10nm,粒径大小主要取决于Fe3O4纳米粒子的粒径。热性能分析表明,PEI-b-PLA/Fe3O4复合微球的聚合物含量为6.6%。产物中Fe3O4含量较高。磁性能分析和紫外分析表明,磁性复合微球PEI-b-PLA/Fe3O4和聚合物PEI-b-PLA一样,可以包裹客体分子,同时具有超顺磁性。     

相反转工艺制备Fe_3O_4/P(St-BA)复合微球的研究

采用共沉淀法制备了油酸修饰的Fe3O4纳米粒子,并采用相反转工艺制备了Fe3O4/P(St-BA)复合微球。用透射电镜(TEM)和热失重(TGA)方法表征了Fe3O4纳米粒子、Fe3O4/P(St-BA)复合微球的形貌和Fe3O4含量。TEM显示大部分Fe3O4粒子被包覆在复合微球内部,同时有部分Fe3O4粒子嵌在微球表面。研究表明:Fe3O4/P(St-BA)复合微球具有良好的磁响应性,油酸量为0.4g修饰的Fe3O4粒子在混合单体中分散效果好。粒度测试结果显示转相水体系中聚乙烯醇和十二烷基硫酸钠复配制备的微球粒径较小且分布较窄;转相过程提高转速微球平均粒径变小,粒度分布变窄。     

聚（N-异丙基丙烯酰胺-co-丙烯酸）/Fe3O4复合微球的制备及表征

采用Fe3O4、N-异丙基丙烯酰胺(NIPAM)和丙烯酸(AA)制备了具有磁敏、温敏和pH敏感的多重敏性复合微球。先使用共沉淀法制备Fe3O4磁性纳米颗粒,并用油酸对其改性。继而采用种子聚合法制备P(NIPAM-co-AA)磁性微球。研究表明,在pH值为10的合成条件下,复合微球的分散性较好。采用疏水性引发剂可相对增加有机、无机相之间的亲和性。通过扫描电镜(SEM)、红外光谱(FT-IR)、动态光散射(DLS)和超导量子干涉磁强计(SQUID)等对微球进行了结构与形态表征,结果证明,复合微球形貌统一,各组分之间聚合良好。复合微球的粒径约为249 nm,对温度、pH可作出预期的响应,饱和磁化强度为40 emu/g。     

微波辐射乳液聚合制备磁性高分子微球

用化学共沉淀法制备了Fe3O4纳米粒子,并用油酸和十二烷基硫酸钠对Fe3O4纳米粒子进行表面修饰,得到了稳定的水分散性纳米Fe3O4磁流体。在Fe3O4磁流体存在下,以苯乙烯和丙烯酰胺为单体,采用微波辐射乳液聚合法制备了Fe3O4/聚(苯乙烯-丙烯酰胺)磁性高分子微球,表征了磁性高分子微球的形态与结构,研究了磁性高分子微球的粒径、热稳定性、磁含量与饱和磁化强度。研究发现,在选定合适的聚合条件下,通过微波辐射乳液聚合法可以制得粒径为70 nm~80 nm、磁含量为18.2%的磁性高分子微球。     

改性Fe3O4纳米粒子在磁性复合超滤膜中的应用

为解决Fe3O4纳米粒子在磁性复合超滤膜中发生团聚和分布不均匀的问题,文中以市售20nm的Fe3O4粒子为对照,添加自制的改性Fe3O4纳米粒子制备出Fe3O4-聚砜(PSF)磁性复合超滤膜(改性复合超滤膜)。经扫描电镜观察膜表面形貌、能谱仪扫描复合膜中Fe元素分布以及铸膜液中Fe3O4纳米粒子分布情况分析和复合膜孔径分布测试后表明,改性后复合超滤膜中纳米粒子的分布较改性前更为均匀,且未出现粒子团聚现象,改性效果明显。由改性前后的复合膜在不同磁场下对聚乙二醇6000和10000的截留率呈现几乎相同的变化趋势可知,添加改性粒子并未改变磁性复合膜的分离特性。     

Fe_3O_4/聚苯乙烯-丙烯酸磁性微球的制备与表征

在Fe3O4磁流体存在下进行双层表面活性剂改性,采用改进的乳液聚合法制备了以苯乙烯和丙烯酸的共聚物为壳的磁性高分子微球。在扫描电镜下观察磁性微球的粒径为250nm左右;通过红外光谱(FT-IR)、XRD、热重分析等手段表征了磁性微球的组成成分、结构的变化以及Fe3O4磁性含量。实验表明,在优化的实验条件下,可以制得磁含量高达32%的磁性复合微球。     

PLLA-PEG-PLLA/Fe_3O_4磁性微球的制备及性能

以聚乙二醇为引发剂,L-丙交酯为单体,开环聚合得到聚乳酸-聚乙二醇三嵌段共聚物(PLLA-PEG-PLLA),采用溶剂挥发法制备了PLLA-PEG-PLLA/Fe_3O_4磁性微球,并通过扫描电镜对其形态进行了表征。利用振动样品磁强计和Tg研究了微球的磁含量和磁性能,结果发现,相同粒径不同磁含量的磁性微球,磁含量越高,升温速率越快,当磁含量为70.57%时,升温速率最快,能达到磁热疗的有效温度42℃。对于磁含量相同,粒径不同的微粒,粒径越小,升温速率越快,粒径约为10μm时升温速率最快。     

磁性核壳Fe3O4/P(GMA-DVB)-SH-Au复合催化剂的制备及催化性能

首先通过水热法合成了单分散空心Fe3O4磁球,之后利用蒸馏沉淀聚合将P(GMA-DVB)聚合物层包覆在Fe3O4磁球表面形成Fe3O4/P(GMA-DVB)核壳结构,巯基化处理后吸附Au纳米粒子,得到磁性核壳Fe3O4/P(GMA-DVB)-SH-Au复合催化剂。利用TEM,SEM,FTIR,XRD,TGA,VSM及UV-vis对其进行表征,并考察该催化剂在催化还原4-硝基苯酚反应中的催化性能。结果表明合成的材料粒径均匀,球形度规整,核壳结构明显,在催化反应中,Fe3O4/P(GMA-DVB)-SH-Au表现出优异的催化性能,而且经过连续8次循环使用后,催化效率仍可保持80%以上。     

Fe3O4/SiO2/CMCH/CdTe荧光磁性微球的合成与表征

利用St ber法和交联法制备出具有荧光和磁性功能的Fe3O4/SiO2/CMCH/CdTe微球,并对其性能和应用效果进行了分析讨论.首先以正硅酸四乙酯为前躯体,Fe2＋和Fe3＋物质的量的比为1∶2,利用超临界干燥法制备出了Fe3O4/SiO2复合微球;并通过透射电镜对其进行观察,Fe3O4颗粒粒径为10 nm,SiO2层厚度为5 nm;其次羧甲基化的壳聚糖（CMCH）被嫁接在Fe3O4/SiO2表面上;然后利用水热法制备出CdTe荧光颗粒,通过壳聚糖与CdTe之间的静电吸引作用,CdTe被吸附在壳聚糖表面;最后利用戊二醛对壳聚糖的选择性交联作用制备出粒径在200 nm以内,饱和磁化强度为22.16 A.m2/kg,且具有良好荧光性能的Fe3O4/SiO2/CMCH/CdTe微球.荧光光谱分析表明最大发射波长从519 nm红移到528 nm,也证实了荧光颗粒CdTe成功吸附在Fe3O4/SiO2/CMCH表面.在动物实验中,该复合微球也显示出良好的荧光性、磁性及稳定性.     

A novel route to prepare Fe3O4/P(MAA-co-NVP) cross-linked magnetic composite microspheres with core-shell architecture by surface-initiated radical dispersion polymerization

A novel route was proposed to design and construct a magnetic composite microsphere with a controllable and regular core-shell architecture, which consists of Fe3O4 nanoparticles chemical-covalently encapsulated with pH-smart poly(methacrylic acid-co-N-vinyl pyrrolidone) (P(MAA-co-NVP)) cross-linked copolymers by a surface-initiated radical dispersion polymerization approach. The multistep surface treatment was employed to improve the dispersity and surface-chemical reactivity of Fe3O4 nanoparticles, involving introduction of active -NH2 groups, coupling of 1,1-methylene bis-(4-isocyanato-cyclohexane) and immobilizing of 2,2'-azobis[2-methyl-N-(2-hydroxyethyl) propionamide]. The structure and morphological characterization were carried out by FTIR, TEM, SEM and XRD etc. The neat Fe3O4 nanoparticles take on an aggregated spherical shape with an average diameter of about 12 nm, while Fe3O4/P(MAA-co-NVP) magnetic microspheres assume regularly monodispersed spheres with a mean dimension of ca. 0.8 microm. The dimension of the microspheres is abruptly increased with increasing pH values of the media. The microspheres exhibit superparamagnetic properties. It is expected that this type of novel microspheres can be employed as a magnetic targeted and pH-sensitive drug carrier.     

Magnetic SiO(2)/Fe(3)O(4) colloidal crystals

We proposed a novel technique to fabricate colloidal crystals by using monodisperse SiO(2) coated magnetic Fe(3)O(4)(SiO(2)/Fe(3)O(4)) microspheres. The magnetic SiO(2)/Fe(3)O(4) microspheres with a diameter of 700?nm were synthesized in the basic condition with ferric sulfate, ferrous sulfate, tartaric acid and tetraethyl orthosilicate (TEOS) in the reaction system. Monodisperse SiO(2)/Fe(3)O(4) superparamagnetic microspheres have been successfully used to fabricate colloidal crystals under the existing magnetic field.     

Microwave absorption enhancement of multifunctional composite microspheres with spinel Fe3 O4 Cores and Anatase TiO2 shells

Multifunctional composite microspheres with spinel Fe(3)O(4) cores and anatase TiO(2) shells (Fe(3)O(4)@TiO(2)) are synthesized by combining a solvothermal reaction and calcination process. The size, morphology, microstructure, phase purity, and magnetic properties are characterized by scanning electron microscopy, transmission electron microscopy (TEM), high-resolution TEM, selected-area electron diffraction, electron energy loss spectroscopy, powder X-ray diffraction, and superconducting quantum interference device magnetometry. The results show that the as-synthesized microspheres have a unique morphology, uniform size, good crystallinity, favorable superparamagnetism, and high magnetization. By varying the experimental conditions such as Fe(3)O(4) size and concentration, microspheres with different core sizes and shell thickneses can be readily synthesized. Furthermore, the microwave absorption properties of these microspheres are investigated in terms of complex permittivity and permeability. By integration of the chemical composition and unique structure, the Fe(3)O(4)@TiO(2) microspheres possess lower reflection loss and a wider absorption frequency range than pure Fe(3)O(4). Moreover, the electromagnetic data demonstrate that Fe(3)O(4@TiO(2) microspheres with thicker TiO(2) shells exhibit significantly enhanced microwave absorption properties compared to those with thinner TiO(2) shells, which may result from effective complementarities between dielectric loss and magnetic loss. All the results indicate that these Fe(3)O(4)@TiO(2) microspheres may be attractive candidate materials for microwave absorption applications.     

Synthesis of biocompatible, mesoporous Fe(3)O(4) nano/microspheres with large surface area for magnetic resonance imaging and therapeutic applications

This article reports the fabrication of mesoporous Fe(3)O(4) nano/microspheres with a high surface area value (163 m(2)/g, Brunauer-Emmett-Teller) and demonstrates their use for drug loading, release, and magnetic resonance imaging (MRI). These monodispersed, mesoporous Fe(3)O(4) nano/microspheres with controllable average sizes ranging from 50 to 200 nm were synthesized using a Fe(3)O(4)/poly(acrylic acid) hybrid sphere template and subsequent silica shell formation and removal. We found that the SiO(2) coating is a crucial step for the successful synthesis of uniform mesoporous Fe(3)O(4) nano/microspheres. The as-synthesized mesoporous Fe(3)O(4) nanospheres show a high magnetic saturation value (M(s) = 48.6 emu/g) and could be used as MRI contrast agents (r(2) = 36.3 s(-1) mM(-1)). Trypan blue exclusion and MTT assay (see Supporting Information ) cytotoxicity analyses of the nanospheres based on HepG2 and MDCK cells showed that the products were biocompatible, with a lower toxicity than lipofectamine (positive control). Hydrophilic ibuprofen and hydrophobic zinc(II) phthalocyanine drug loading into mesoporous Fe(3)O(4) nanospheres and selected release experiments were successfully achieved. The potential use of mesoporous Fe(3)O(4) nanospheres in biomedical applications, in light of the nano/microspheres' efficient drug loading and release, MRI, and low cytotoxicity, has been demonstrated. It is envisaged that mesoporous Fe(3)O(4) nanospheres can be used as drug carriers and MRI contrast agents for the reticuloendothelial system; they can also be delivered locally, such as via a selective catheter.     

Synthesis of surface imprinted polymers based on wrinkled flower-like magnetic graphene microspheres with favorable recognition ability for BSA

Nowadays,the employing of molecular imprinting technique in the analysis and separation of proteins from complex biological samples has been widely favored by researchers.To enrich the types of surface protein imprinted materials and expand the application fields of graphene materials,novel surface molecular imprinted polymers (MIPs) based on magnetic graphene microspheres Fe304@rGO@MIPs are first synthesized in this paper.Fe304@rGO@MIPs are prepared by oxidative self-polymerization of dopamine on the surface of magnetic graphene (Fe304@rGO) composite microspheres.Bovine serum albumin (BSA) is selected as protein template.Fe3O4@rGO microspheres with wrinkled flower-like structure are obtained by compounding Fe3O4 and graphene oxide in an appropriate ratio via the method of high-temperature reduction self-assembly.The microspheres exhibit promising dispersibility,high external surface area,rich pore structure,and sufficient magnetic properties.These advantages not only prevent the agglomeration of imprinted microspheres in the aqueous phase,which is conducive to contact and static adsorption,but also increase the amount of protein imprinting.Additionally,sufficient magnetic properties ensure fast and effective separation of the adsorbents.While the adsorption capacity is increased,the separation procedure becomes simple.The binding capacity of Fe304@rGO@MIPs for BSA can reach 317.58 mg/g within 60 min,and the imprinting factor (IF) is 4.24.More importantly,Fe3O4@rGO@MIPs can specifically recognize the target BSA from the mixed proteins and the actual sample.There is no significant decrease in the adsorption amount,IF,and magnetic properties after eight runs.It is promising to be used in the separation of proteins from the actual biological samples.     

带氨基磁性微球的制备及其对活性艳兰KN-R吸附行为

用无皂乳液聚合及种子聚合方法制备了Fe3O4@P(MMA-DVB-GMA)复合微球,用乙二胺对微球开环后制备得到了表面带氨基的磁性微球,用透射电镜(TEM)、热失重分析(TGA)对其进行了表征,并考察了其对染料KN-R的吸附性能。结果表明,制备的磁性微球粒径在150nm左右,大小均一,具备明显的核壳结构,磁含量为8wt%,在磁场作用下能够快速分离出来。该吸附剂在150min内达到吸附平衡,能够有效去除染料KNR,在4～9范围内pH对吸附剂吸附容量影响较小。     

A study on the in vitro degradation of poly(L-lactide)/chitosan microspheres scaffolds

Recent research shows that the addition of chitosan microspheres (CMs) to poly(L-lactide) (PLLA) can result in a composite scaffold material with improved biocompatibility and mechanical properties for tissue engineering applications. However, research regarding the influence of CMs on scaffold degradation is absent in the literature. This paper presents a study on the in vitro degradation of scaffolds made from PLLA with CMs. In this study, the PLLA/CMs scaffolds with a 25% ratio of CMs to PLLA were immersed in phosphate-buffered saline (PBS) solution at 37°C for 8 weeks. The in vitro degradation of the scaffolds was investigated using micro-computed tomography (μCT), weight loss analysis, Raman spectroscopy, and differential scanning calorimetry (DSC). Microstructure changes during degradation were monitored using μCT. The μCT results were consistent with the results obtained from Raman spectra and DSC analysis, which reflected that adding CMs into PLLA can decrease the degradation rate compared with pure PLLA scaffolds. The results suggest that PLLA/CMs scaffold degradation can be regulated and controlled to meet requirements imposed a given tissue engineering application.