Viability of solar photovoltaics as an electricity generation source for Jordan

Viability of solar photovoltaics as an electricity generation source for Jordan was assessed utilizing a proposed 5 MW grid-connected solar photovoltaic power plant. Long-term (1994–2003) monthly average daily global solar radiation and sunshine duration data for 24 locations – distributed all over the country – were studied and analyzed to assess the distribution of radiation and sunshine duration over Jordan, and formed an input data for evaluation and analysis of the proposed plant's electricity production and economic feasibility. It was found that – depending on the geographical location – the global solar radiation on horizontal surface varied between 1.51 and 2.46 MWh/m²/year with an overall mean value of 2.01 MWh/m²/year for Jordan. The sunshine duration was found to vary – according to the location – between 8.47 and 9.68 h/day, with a mean value of 9.07 h/day and about 3311 sunshine hours annually for Jordan. The annual electricity production of the proposed plant varied depending on the location between 6.886 and 11.919 GWh/year, with a mean value of 9.46 GWh/year. The specific yield varied between 340.9 and 196.9 kWh/m², while the mean value was 270.59 kWh/m². Analysis of the annual electricity production of the plant, the specific yield, besides the economic indicators i.e., internal rate of return, simple payback period, years– to- positive cash flow, net present value, annual life cycle saving, benefit–cost ratio, and cost of energy – for all sites – showed that Tafila and Karak are the most suitable sites for the solar photovoltaic power plant's development and Wadi Yabis is the worst. The results also showed that an average of 7414.9 tons of greenhouse gases can be avoided annually utilizing the proposed plant for electricity generation at any part of Jordan.     

Economic analysis of power generation from floating solar chimney power plant

Solar chimney thermal power technology that has a long life span is a promising large-scale solar power generating technology. This paper performs economic analysis of power generation from floating solar chimney power plant (FSCPP) by analyzing cash flows during the whole service period of a 100 MW plant. Cash flows are influenced by many factors including investment, operation and maintenance cost, life span, payback period, inflation rate, minimum attractive rate of return, non-returnable subsidy rate, interest rate of loans, sale price of electricity, income tax rate and whether additional revenue generated by carbon credits is included or not. Financial incentives and additional revenue generated by carbon credits can accelerate the development of the FSCPP. Sensitivity analysis to examine the effects of the factors on cash flows of a 100 MW FSCPP is performed in detail. The results show that the minimum price for obtaining minimum attractive rate of return (MARR) of 8% reaches 0.83 yuan (kWh)^?1 under financial incentives including loans at a low interest rate of 2% and free income tax. Comparisons of economics of the FSCPP and reinforced concrete solar chimney power plant or solar photovoltaic plant are also performed by analyzing their cash flows. It is concluded that FSCPP is in reality more economical than reinforced concrete solar chimney power plant (RCSCPP) or solar photovoltaic plant (SPVP) with the same power capacity.     

Energy metrics of photovoltaic/thermal and earth air heat exchanger integrated greenhouse for different climatic conditions of India

In this paper, a study is carried out to evaluate the annual thermal and exergy performance of a photovoltaic/thermal (PV/T) and earth air heat exchanger (EAHE) system, integrated with a greenhouse, located at IIT Delhi, India, for different climatic conditions of Srinagar, Mumbai, Jodhpur, New Delhi and Bangalore. A comparison is made of various energy metrics, such as energy payback time (EPBT), electricity production factor (EPF) and life cycle conversion efficiency (LCCE) of the system by considering four weather conditions (a–d type) for five climatic zones. The embodied energy and annual energy outputs have been used for evaluation of the energy metrics. The annual overall thermal energy, annual electrical energy savings and annual exergy was found to be best for the climatic condition of Jodhpur at 29,156.8 kWh, 1185 kWh and 1366.4 kWh, respectively when compared with other weather stations covered in the study, due to higher solar intensity I and sunshine hours, and is lowest for Srinagar station. The results also showed that energy payback time for Jodhpur station is lowest at 16.7 years and highest for Srinagar station at 21.6 years. Electricity production factor (EPF) is highest for Jodhpur, i.e. 2.04 and Life cycle conversion efficiency (LCCE) is highest for Srinagar station. It is also observed that LCCE increases with increase in life cycle.     

Biomass and central receiver system (CRS) hybridization: Volumetric air CRS and integration of a biomass waste direct burning boiler on steam cycle

Concentrated solar power (CSP) plants generate an almost continuous flow of fully dispatchable “renewable” electricity and can replace the present fossil fuel power plants for base load electricity generation. Nevertheless, actual CSP plants have moderate electricity costs, in most cases quite low capacity factors and transient problems due to high inertia. Hybridization can help solve these problems and, if done with the integration of forest waste biomass, the “renewable” goal can be maintained, with positive impact on forest fire reduction. Local conditions, resources and feed in tariffs have great impact on the economical and technical evaluation of hybrid solutions; one of the premium European locations for this type of power plants is the Portuguese Algarve region.Due to the concept innovation level, conservative approaches were considered to be the best solutions. In this perspective, for a lower capital investment 4 MWe power plant scale, the best technical/economical solution is the hybrid CRS/biomass power plant HVIB3S4s with CS3 control strategy. It results in a levelized electricity cost (LEC) of 0.146 €/kWh, with higher efficiency and capacity factor than a conventional 4 MWe CRS. A larger 10 MWe hybrid power plant HVIB3S10s could generate electricity with positive economical indicators (LEC of 0.108 €/kWh and IRR of 11.0%), with twice the annual efficiency (feedstock to electricity) and lower costs than a conventional 4 MWe CRS. It would also lead to a 17% reduction in biomass consumption (approximately 12,000 tons less per year) when compared with a typical 10 MWe biomass power plant – FRB10; this would be significant in the case of continuous biomass price increase.     

Calculating energy-saving potentials of heat-island reduction strategies

We have developed summary tables (sorted by heating- and cooling-degree-days) to estimate the potential of heat-island reduction (HIR) strategies (i.e., solar-reflective roofs, shade trees, reflective pavements, and urban vegetation) to reduce cooling-energy use in buildings. The tables provide estimates of savings for both direct effect (reducing heat gain through the building shell) and indirect effect (reducing the ambient air temperature).In this analysis, we considered three building types that offer the most savings potential: residences, offices, and retail stores. Each building type was characterized in detail by Pre-1980 (old) or 1980⁺ (new) construction vintage and with natural gas or electricity as heating fuel. We defined prototypical-building characteristics for each building type and simulated the effects of HIR strategies on building cooling- and heating-energy use and peak power demand using the DOE-2.1E model and weather data for about 240 locations in the US. A statistical analysis of previously completed simulations for five cities was used to estimate the indirect savings. Our simulations included the effect of (1) solar-reflective roofing material on building (direct effect), (2) placement of deciduous shade trees near south and west walls of building (direct effect), and (3) ambient cooling achieved by urban reforestation and reflective building surfaces and pavements (indirect effect).Upon completion of estimating the direct and indirect energy savings for all the locations, we integrated the results in tables arranged by heating- and cooling-degree-days. We considered 15 bins for heating-degree-days, and 12 bins for cooling-degree-days. Energy use and savings are presented per 1000 ft² of roof area.In residences heated with gas and in climates with greater than 1000 cooling-degree-days, the annual electricity savings in Pre-1980 stock ranged from 650 to 1300 kWh/1000 ft²; for 1980⁺ stock savings ranged 300–600 kWh/1000 ft². For residences heated with electricity, the savings ranged from 350 to 1300 kWh/1000 ft² for Pre-1980 stock and 190–600 kWh/1000 ft² for 1980⁺ stocks. In climates with less than 1000 cooling-degree-days, the electricity savings were not significantly higher than winter heating penalties. For gas-heated office buildings, simulations indicated electricity savings in the range of 1100–1500 kWh/1000 ft² and 360–700 kWh/1000 ft², for Pre-1980 and 1980⁺ stocks, respectively. For electrically heated office buildings, simulations indicated electricity savings in the range of 700–1400 kWh/1000ft² and 100–700 kWh/1000 ft², for Pre-1980 and 1980⁺ stocks, respectively. Similarly, for gas-heated retail store buildings, simulations indicated electricity savings in the range of 1300–1700 kWh/1000 ft² and 370–750 kWh/1000 ft², for Pre-1980 and 1980⁺ stocks, respectively. For electrically heated retail store buildings, simulations indicated electricity savings in the range of 1200–1700 kWh/1000 ft² and 250–750 kWh/1000 ft², for Pre-1980 and 1980⁺ stocks, respectively.     

Performance of simulated flexible integrated gasification polygeneration facilities,Part B: Economic evaluation.

This paper investigates the economics of integrated gasification polygeneration (IG-PG) facilities and assesses under which market conditions flexible facilities outperform static facilities. In this study, the facilities use Eucalyptus wood pellets (EP), torrefied wood pellets (TOPS) and Illinois #6 coal as feedstock to produce electricity, FT-liquids, methanol and urea. All facilities incorporate CCS. The findings show production costs from static IG-PG facilities ranging between 12 and 21 €/GJ using coal, 19–33 €/GJ using TOPS and 22–38 €/GJ using EP, which is above the average market prices. IG-PG facilities can become competitive if capital costs drop by 10%–27% for coal based facilities. Biomass based facilities will need lower biomass pellet prices or higher CO₂ credit prices. Biomass becomes competitive with coal at a CO₂ credit price of 50–55 €/t CO₂. Variations in feedstock, CO₂ credit and electricity prices can be offset by operating a feedstock flexible IG-PG facility, which can switch between coal and TOPS, thereby altering its electricity production. The additional investment is around 0.5% of the capital costs of a dedicated coal based IG-PG facility. At 30 €/t CO₂, TOPS will be the preferred feedstock for 95% of the time at a feedstock price of 5.7 €/GJ. At these conditions, FT-liquids (gasoline/diesel) can be produced for 15.8 €/GJ (116 $/bbl). Historic records show price variations between 5.7 and 7.3 €/GJ for biomass pellet, 1.0–5.6 €/GJ for coal and 0–32 €/t CO₂. Within these price ranges, coal is generally the preferred feedstock, but occasionally biomass is preferred. Lower biomass prices will increase the frequency of switching feedstock preference from coal to biomass, raising the desire for flexibility. Of the three investigated chemicals, an IG-PG facility producing FT-liquids benefits the most from flexibility. Our study suggests that if the uncertainty in commodity prices is high, a small additional investment can make flexible IG-PG facilities attractive.     

Electricity generation from wave power in Canada

The performance of three different types of wave energy converters (WECs) is evaluated at hundreds of Canadian locations using wave activity data made available by the Marine Environmental Data Service of Canada. Two Atlantic and three Pacific locations are found where at least one of these devices operates with a capacity factor of greater than 20%, while also being located close to urban/industrial centers. The economics of a nominal 25 GWh wave power plant are investigated at these five locations and compared among the three WEC types using two indicators: the 25-year life-cycle cost, and the required price of electricity for a 10-year simple payback period. The lowest required electricity price for a 10-year payback is $0.089/kWh, and occurs at a location near the Hibernia Oil Platform using the AquaBuOY WEC. The highest annual capacity factor is 32.1%, which occurs near the Hibernia Oil Platform when using the WaveDragon WEC. The 25-year life-cycle cost evaluations suggest that wave power plants at locations near Ucluelet, St. John's, and the Hibernia Oil Platform could all be profitable using either the AquaBuOY or the WaveDragon if a price of electricity between $0.10 and $0.15/kWh can be secured, depending on location and device.     

Realistic generation cost of solar photovoltaic electricity

Solar photovoltaic (SPV) power plants have long working life with zero fuel cost and negligible maintenance cost but requires huge initial investment. The generation cost of the solar electricity is mainly the cost of financing the initial investment. Therefore, the generation cost of solar electricity in different years depends on the method of returning the loan. Currently levelized cost based on equated payment loan is being used. The static levelized generation cost of solar electricity is compared with the current value of variable generation cost of grid electricity. This improper cost comparison is inhibiting the growth of SPV electricity by creating wrong perception that solar electricity is very expensive. In this paper a new method of loan repayment has been developed resulting in generation cost of SPV electricity that increases with time like that of grid electricity. A generalized capital recovery factor has been developed for graduated payment loan in which capital and interest payment in each installment are calculated by treating each loan installment as an independent loan for the relevant years. Generalized results have been calculated which can be used to determine the cost of SPV electricity for a given system at different places. Results show that for SPV system with specific initial investment of 5.00 $/kWh/year, loan period of 30 years and loan interest rate of 4% the levelized generation cost of SPV electricity with equated payment loan turns out to be 28.92 ¢/kWh, while the corresponding generation cost with graduated payment loan with escalation in annual installment of 8% varies from 9.51 ¢/kWh in base year to 88.63 ¢/kWh in 30th year. So, in this case, the realistic current generation cost of SPV electricity is 9.51 ¢/kWh and not 28.92 ¢/kWh. Further, with graduated payment loan, extension in loan period results in sharp decline in cost of SPV electricity in base year. Hence, a policy change is required regarding the loan repayment method. It is proposed that to arrive at realistic cost of SPV electricity long-term graduated payment loans may be given for installing SPV power plants such that the escalation in annual loan installments be equal to the estimated inflation in the price of grid electricity with loan period close to working life of SPV system.     

Consequences of a carbon tax on household electricity use and cost,carbon emissions,and economics of household solar and wind

The study was conducted to determine the consequences of a carbon tax, equal to an estimated social cost of carbon of $37.2/Mg, on household electricity cost, and to determine if a carbon tax would be sufficient to incentivize households to install either a grid-tied solar or wind system. U.S. Department of Energy hourly residential profiles for five locations, 20 years of hourly weather data, prevailing electricity pricing rate schedules, and purchase prices and solar panel and wind turbine power output response functions, were used to address the objectives. Two commercially available household solar panels (4 kW, 12 kW), two wind turbines (6 kW, 12 kW), and two price rate structures (traditional meter, smart meter) were considered. Averaged across the five households, the carbon tax is expected to reduce annual consumption by 4.4% (552 kWh/year) for traditional meter households and by 4.9% (611 kWh/year) for households charged smart meter rates. The carbon tax increases electricity cost by 19% ($202/year). For a household cost of $202/year the carbon tax is expected to reduce social costs by $11. Annual carbon tax collections of $234/household are expected. Adding the carbon tax was found to be insufficient to incentivize households to install either a solar panel or wind turbine system. Installation of a 4 kW solar system would increase the annual cost by $1546 (247%) and decrease CO₂ emissions by 38% (2526 kg) valued at $94/household. The consequence of a carbon tax would depend largely on how the proceeds of the tax are used.     

Feasibility of pico-hydro and photovoltaic hybrid power systems for remote villages in Cameroon

Pico-hydro (pH) and photovoltaic (PV) hybrid systems incorporating a biogas generator have been simulated for remote villages in Cameroon using a load of 73 kWh/day and 8.3 kWp. Renewable energy systems were simulated using HOMER, the load profile of a hostel in Cameroon, the solar insolation of Garoua and the flow of river Mungo. For a 40% increase in the cost of imported power system components, the cost of energy was found to be either 0.352 €/kWh for a 5 kW pico-hydro generator with 72 kWh storage or 0.396 €/kWh for a 3 kWp photovoltaic generator with 36 kWh storage. These energy costs were obtained with a biomass resource cost of 25 €/tonne. The pH and PV hybrid systems both required the parallel operation of a 3.3 kW battery inverter with a 10 kW biogas generator. The pH/biogas/battery systems simulated for villages located in the south of Cameroon with a flow rate of at least 92 l/s produced lower energy costs than PV/biogas/battery systems simulated for villages in the north of Cameroon with an insolation level of at least 5.55 kWh/m²/day. For a single-wire grid extension cost of 5000 €/km, operation and maintenance costs of 125 €/yr/km and a grid power price of 0.1 €/kWh, the breakeven grid extension distances were found to be 12.9 km for pH/biogas/battery systems and 15.2 km for PV/biogas/battery systems respectively. Investments in biogas based renewable energy systems could thus be considered in the National Energy Action Plan of Cameroon for the supply of energy to key sectors involved in poverty alleviation.     

Techno-economic analysis of using corn stover to supply heat and power to a corn ethanol plant – Part 2: Cost of heat and power generation systems

This paper presents a techno-economic analysis of corn stover fired process heating (PH) and the combined heat and power (CHP) generation systems for a typical corn ethanol plant (ethanol production capacity of 170 dam³). Discounted cash flow method was used to estimate both the capital and operating costs of each system and compared with the existing natural gas fired heating system. Environmental impact assessment of using corn stover, coal and natural gas in the heat and/or power generation systems was also evaluated. Coal fired process heating (PH) system had the lowest annual operating cost due to the low fuel cost, but had the highest environmental and human toxicity impacts. The proposed combined heat and power (CHP) generation system required about 137 Gg of corn stover to generate 9.5 MW of electricity and 52.3 MW of process heat with an overall CHP efficiency of 83.3%. Stover fired CHP system would generate an annual savings of 3.6 M$ with an payback period of 6 y. Economics of the coal fired CHP system was very attractive compared to the stover fired CHP system due to lower fuel cost. But the greenhouse gas emissions per Mg of fuel for the coal fired CHP system was 32 times higher than that of stover fired CHP system. Corn stover fired heat and power generation system for a corn ethanol plant can improve the net energy balance and add environmental benefits to the corn to ethanol biorefinery.     

Design,economic analysis and environmental considerations of mini-grid hybrid power system with reverse osmosis desalination plant for remote areas

This paper discusses the design process of a mini-grid hybrid power system with reverse osmosis desalination plant for remote areas, together with an economic analysis and environmental considerations for the project life cycle. It presents a design scenario for supplying electricity and fulfilling demand for clean water in remote areas by utilising renewable energy sources and a diesel generator with a reverse osmosis desalination plant as a deferrable load. The economic issues analysed are the initial capital cost needed, the fuel consumption and annual cost, the total net present cost (NPC), the cost of electricity (COE) generated by the system per kWh and the simple payback time (SPBT) for the project. The environmental considerations discussed are the amount of gas emissions, such as CO₂ and NO_x, as well as particulate matter released into the atmosphere. Simulations based on an actual set of conditions in a remote area in the Maldives were performed using HOMER for two conditions: before and after the Tsunami of 26th December 2004. Experimental results on the prototype 5 kVA mini-grid inverter and reverse osmosis desalination plant, rated at 5.5 kWh/day, are also presented here to verify the idea of providing power and water supplies to remote areas.     

Development of an economical model to determine an appropriate feed-in tariff for grid-connected solar PV electricity in all states of Australia

Australia is a country with a vast amount of natural resources including sun and wind. Australia lies between latitude of 10–45°S and longitude of 112–152°E, with a daily solar exposure of between less than 3 MJ/(m² day) in winter and more than 30 MJ/(m² day) in summer.Global solar radiation in Australia varies between minimum of 3285 MJ/(m² year) in Hobart to 8760 MJ/(m² year) in Northern Territory. As a result of this wide range of radiation level there will be a big difference between costs of solar PV electricity in different locations.A study we have recently conducted on the solar PV electricity price in all states of Australia. For this purpose we have developed an economical model and a computer simulation to determine the accurate unit price of grid-connected roof-top solar photovoltaic (PV) electricity in A$/kWh for all state of Australia. The benefit of this computer simulation is that we can accurately determine the most appropriate feed-in tariff of grid-connected solar PV energy system. The main objective of this paper is to present the results of this study.A further objective of this paper is to present the details of the unit price of solar PV electricity in the state of Victoria in each month and then to compare with electricity price from conventional power systems, which is currently applied to this state. The state Victoria is located south of Australia and in terms of sun radiation is second lowest compared with the other Australian states.The computer simulation developed for this study makes it possible to determine the cost of grid-connected solar PV electricity at any location in any country based on availability of average daily solar exposure of each month as well as economical factors of the country.     

Techno-economic evaluation of off-grid hybrid photovoltaic–diesel–battery power systems for rural electrification in Saudi Arabia—A way forward for sustainable development

The burning of depleting fossil fuels for power generation has detrimental impact on human life and climate. In view of this, renewable solar energy sources are being increasingly exploited to meet the energy needs. Moreover, solar photovoltaic (PV)–diesel hybrid system technology promises lot of opportunities in remote areas which are far from utility grid and are driven by diesel generators. Integration of PV systems with the diesel plants is being disseminated worldwide to reduce diesel fuel consumption and to minimize atmospheric pollution. The Kingdom of Saudi Arabia (K.S.A.) being endowed with high intensity of solar radiation, is a prospective candidate for deployment of PV systems. Also, K.S.A. has large number of remote scattered villages. The aim of this study is to analyze solar radiation data of Rafha, K.S.A., to assess the techno-economic feasibility of hybrid PV–diesel–battery power systems to meet the load requirements of a typical remote village Rawdhat Bin Habbas (RBH) with annual electrical energy demand of 15,943 MWh. Rafha is located near RBH. The monthly average daily global solar radiation ranges from 3.04 to 7.3 kWh/m². NREL's HOMER software has been used to perform the techno-economic evaluation. The simulation results indicate that for a hybrid system composed of 2.5 MWp capacity PV system together with 4.5 MW diesel system (three 1.5 MW units) and a battery storage of 1 h of autonomy (equivalent to 1 h of average load), the PV penetration is 27%. The cost of generating energy (COE, US$/kWh) from the above hybrid system has been found to be 0.170$/kWh (assuming diesel fuel price of 0.1$/l). The study exhibits that the operational hours of diesel generators decrease with increase in PV capacity. The investigation also examines the effect of PV/battery penetration on COE, operational hours of diesel gensets. Concurrently, emphasis has been placed on: un-met load, excess electricity generation, percentage fuel savings and reduction in carbon emissions (for different scenarios such as: PV–diesel without storage, PV–diesel with storage, as compared to diesel-only situation), COE of different hybrid systems, etc. The decrease in carbon emissions by using the above hybrid system is about 24% as compared to the diesel-only scenario.     

Analysis of ground source heat pumps with horizontal ground heat exchangers for northern Japan

Computer simulation and analysis of a ground source heat pump system with horizontal ground heat exchangers operating in heating (max 5.5 kW) and cooling (max 3.3 kW) mode was carried out for a typical residential house, with 200 m² of living space, located in Sapporo (Japan). In spite of high electricity rate, the ground source heat pump system is more beneficial alternative for space heating than an oil furnace and an electric resistance system. Besides, the heat pump technology offers relatively low thermal degradation of the ground environment, lower cost of heating and cooling, higher operating efficiency than electric resistance heating or air-source heat pump and is environmentally clean, i.e. without greenhouse gas emission, if the electricity is generated from renewable energy resources, such as wind and solar. The use of the cooling mode can provide further benefits like a shorter investment payback and human thermal comfort in summer. As a result, application of horizontal loops for new and retrofit residential and commercial use in northern Japan is feasible particularly in farmland areas.     

Assessment of renewable energy reserves in Taiwan

Since Taiwan imports more than 99% of energy supply from foreign countries, energy security has always been the first priority for government to formulate energy policy. The development of renewable energy not only contributes to the independence of energy supply, but also achieves benefits of economic development and environmental protection. Based upon information available to public, the present paper reassesses reserves of various renewable energies in Taiwan. The assessment includes seven kinds of renewable energies, namely, solar energy, wind power, biomass energy, wave energy, tidal energy, geothermal energy and hydropower, which are all commercialized and matured in terms of current technologies. Other renewable energies, which have not proven as matured as the aforementioned ones, are only assessed preliminarily in this paper, such as second generation of biomass, deep geothermal energy, the Kuroshio power generation and ocean thermal energy conversion.According to the estimation of this paper, the reserve of wind energy, up to 29.9 kWh/d/p (i.e., kWh per day per person), is the largest one among seven kinds of renewable energies in Taiwan, followed by 24.27 kWh/d/p of solar energy, 4.55 kWh/d/p of biomass, 4.58 kWh/d/p of ocean energy, 0.67 kWh/d/p of geothermal energy and 16.79 kWh/d/p of hydropower. If regarding biomass as a primary energy, and assuming 40% being the average efficiency to convert primary energy into electricity, the total power of the seven kinds of renewable energy reserves is about 78.03 kWh/d/p, which is equal to 2.75 times of 28.35 kWh/d/p of national power generation in 2008. If the reserves of 54.93 kWh/d/p estimated from other four kinds of renewable energies that have not technically matured yet are also taken into account, it will result that the reserves of renewable energy in Taiwan can be quite abundant.Although the results of the assessment point out that Taiwan has abundant renewable energy resources, the four inherent shortcomings – low energy density, high cost of power generation, instability of power supply, and current cost of renewable energy being still higher than that of fossil energy – have to be overcome first, before renewable energy is actually formed as a main component in national energy mix. The measures executed by government to break through these barriers further include the upgrade of the technological level, the formulation of the necessary policies, and the work together from all levels for the overall promotion.     

Providing electricity access to remote areas in India: Niche areas for decentralized electricity supply

This paper presents the results of a study undertaken for identifying niche areas in India where renewable energy based decentralized generation options can be financially more attractive as compared to grid extension for providing electricity. The cost of delivering electricity in remote areas considering cost of generation of electricity and also cost of its transmission and distribution in the country have been estimated. Considering electricity generated from coal thermal power plants, the delivered cost of electricity in remote areas, located in the distance range of 5–25 km is found to vary from Rs. 3.18/kWh to Rs. 231.14/kWh depending on peak electrical load up to 100 kW and load factor. The paper concludes that micro-hydro, dual fuel biomass gasifier systems, small wind electric generators and photovoltaic systems could be financially attractive as compared to grid extension for providing access to electricity in small remote villages.     

Wind energy as a potential generation source at Ras Benas,Egypt

Analysis of the wind characteristics in Ras Benas city located on the east coast of Red Sea in Egypt using measured data (wind, pressure and temperature) and Weibull function were made.Statistical analysis model to evaluate the wind energy potential was introduced. According to the power calculations done for the site, the annual mean wind density is 315 kW/m² at a height of 70 m above ground level. This station has a huge wind energy potential for electricity generation, especially during spring and summer seasons, comparing with some European countries.In addition, the monthly wind turbine efficiency parameter (η_monthly) has been calculated by using a commercial wind turbine 1 MW with 70 m hub height to help designers and users in evaluating the potentialities and choosing the suitable wind turbine for the considered site. The use of wind turbine with capacity greater than 1000 kW at this station was recommended.Ras Benas station was selected to install 30 MW-wind farm consists of 20 commercial wind turbines (Nordex S 77) with hub heights and Rotor diameter were 100 and 77 m, respectively. This site has annual wind speed more than 9.8 m/s at 100 m height and enough area to locate these turbines.The estimated energy production using WASP Program of these wind farm was 130 GWh/year. Furthermore, the production costs was found 1.3€ cent/kWh, which is a competition price at the wind energy world market.     

Power,placement and LEC evaluation to install CSP plants in northern Chile

Chile is expecting a 5.4% growth in energy consumption per year until 2030, requiring new and better solutions for the upward trend of its electricity demand. This state leads to select and study one of the potential alternatives for electricity generation: concentrated solar power (CSP) plants. Such renewable technology found in Chile a very favorable condition. Recent researches indicate Atacama Desert as one of the best regions for solar energy worldwide, having an average radiation higher than in places where CSP plants are currently implemented, e.g. Spain and USA. The aim of this study is to present an analysis of levelized energy cost (LEC) for different power capacities of CSP plants placed in distinct locations in northern Chile. The results showed that CSP plants can be implemented in Atacama Desert with LECs around 19 ¢US$/kWh when a gas-fired backup and thermal energy storage (TES) systems are fitted. This value increases to approximately 28 ¢US$/kWh if there is no backup system.     

Environmental and economic assessment of landfill gas electricity generation in Korea using LEAP model

As a measure to establish a climate-friendly energy system, Korean government has proposed to expand landfill gas (LFG) electricity generation capacity. The purpose of this paper is to analyze the impacts of LFG electricity generation on the energy market, the cost of generating electricity and greenhouse gases emissions in Korea using a computer-based software tool called ‘Long-range Energy Alternative Planning system’ (LEAP) and the associated ‘Technology and Environmental Database’. In order to compare LFG electricity generation with existing other generating facilities, business as usual scenario of existing power plants was surveyed, and then alternative scenario investigations were performed using LEAP model. Different alternative scenarios were considered, namely the base case with existing electricity facilities, technological improvement of gas engine and LFG maximum utilization potential with different options of gas engine (GE), gas turbine (GT), and steam turbine (ST). In the technological improvement scenario, there will be 2.86 GWh or more increase in electricity output, decrease of 45 million won (Exchange rate (1$=1200 won)). in costs, and increase of 10.3 thousand ton of CO₂ in global warming potentials due to same period (5 year) of technological improvement. In the maximum utilization potential scenario, LFG electricity generation technology is substituted for coal steam, nuclear, and combined cycle process. Annual cost per electricity product of LFG electricity facilities (GE 58MW, GT 53.5MW, and ST 54.5MW) are 45.1, 34.3, and 24.4 won/kWh, and steam turbine process is cost-saving. LFG-utilization with other forms of energy utilization reduces global warming potential by maximum 75% with compared to spontaneous emission of CH₄. LFG electricity generation would be the good solution for CO₂ displacement over the medium term and additional energy profits.