Multiwalled carbon nanotube/cement composites with exceptional electromagnetic interference shielding properties

Multi-walled carbon nanotube (MWCNT)/portland cement(PC) composites have been fabricated to evaluate their electromagnetic interference (EMI) shielding effectiveness (SE). The results show that they can be used for the shielding of EMI in the microwave range. The incorporation of 15 wt.% MWCNTs in the PC matrix produces a SE more than 27 dB in X-band (8.2–12.4 GHz), and this SE is found to be dominated by absorption. Furthermore, the structural analysis, surface morphology and surface interaction of MWCNTs with PC matrix have been explored using XRD, SEM and X-ray photoelectron spectroscopy technique.     

Multiwalled carbon nanotubes–BaTiO3/silica composites with high complex permittivity and improved electromagnetic interference shielding at elevated temperature

Composites with silica matrix and mixed filler of multiwalled carbon nanotubes (MWCNTs) and BaTiO₃ powder were fabricated. Excellent uniform dispersion of MWCNTs can be obtained using a two-step mixing method. Both of the real and imaginary parts of complex permittivity increased with increasing MWCNT content and measured temperature. The electromagnetic interference (EMI) shielding results showed that the absorption mechanism is the main contribution to the total EMI shielding effectiveness (SE). Compared with the EMI SE resulting from reflection, the absorption showed more dependence on the MWCNT content, measured temperature and frequency. The total EMI SE is greater than 20 dB at 25 °C and 50 dB at 600 °C in the whole frequency range of 12.4–18 GHz with a 1.5 mm composite thickness, which suggests that the MWCNT–BaTiO₃/silica composites could be good candidates for the EMI shielding materials in the measured frequency and temperature region.     

Comparative study of electromagnetic interference shielding properties of injection molded versus compression molded multi-walled carbon nanotube/polystyrene composites

This study compares electromagnetic interference (EMI) shielding properties of injection molded versus compression molded multi-walled carbon nanotube/polystyrene (MWCNT/PS) composites, i.e., properties such as EMI shielding effectiveness (EMI SE), electrical conductivity, real permittivity and imaginary permittivity. The injection molded (MWCNT-aligned) samples showed lower EMI shielding properties than compression molded (randomly distributed MWCNT) samples that was attributed to lower probability of MWCNTs contacting each other due to MWCNT alignment. The compression molded samples showed higher electrical conductivity and lower electrical percolation threshold than the injection molded samples. The compression molded samples at MWCNT concentrations of 5.00 and 20.0 wt.% showed real permittivity two times and imaginary permittivity five times greater than the injection molded samples. The EMI SE for the compression molded samples at MWCNT concentrations of 5.00 and 20.0 wt.% was 15.0 and 30.0 dB, respectively, significantly greater than EMI SE for the injection molded samples. Lower EMI SE for the injection molded samples was ascribed to lower electrical conductivity, real permittivity (polarization loss) and imaginary permittivity (Ohmic loss). Comparison of the EMI shielding properties of the compression molded versus injection molded samples confirmed that EMI shielding does not require filler connectivity; however it increases with filler connectivity.     

Excellent electromagnetic interference shielding and mechanical properties of high loading carbon-nanotubes/polymer composites designed using melt recirculation equipped twin-screw extruder

This paper describes for the first time a facile, scalable and commercially viable melt blending approach involving use of twin-screw extruder with melt recirculation provision, for uniform dispersion of up to 4.6 vol% multiwall carbon nanotubes (MWCNTs) within polypropylene random copolymer (PPCP). Morphological characterization of PPCP/MWCNT nanoscale composites (NCs) was done using scanning electron microscopy and transmission electron microscopy, which show good dispersion of MWCNTs in the PPCP matrix even at high loadings and confirm the formation of true NCs. The improved dispersion leads to the formation of electrically conducting three dimensional networks of MWCNTs within PPCP matrix at very low percolation threshold (∼0.19 vol%). The attainment of dc conductivity value of ∼10⁻³ S/cm, tensile strength of ∼42 MPa and good thermal stability for 4.6 vol% MWCNTs loading NC along with electromagnetic interference (EMI) shielding effectiveness (SE) value of −47 dB (>99.99% attenuation), demonstrate its potential for making light weight, mechanically strong and thermally stable EMI shields. These NCs also display specific SE value of ∼−51 dB cm³/g which is highest among unfoamed polymer NCs.     

5‐Sulfoisophthalic acid monolithium salt doped polypyrrole/multiwalled carbon nanotubes composites for EMI shielding application in X‐band (8.2–12.4 GHz)

This article describes the synthesis and characterization of highly conductive polypyrrole (PPy)/multiwalled carbon nanotube (MWCNT) composites prepared by in situ polymerization of pyrrole using 5‐sulfoisophthalic acid monolithium salt [lithio sulfoisophthalic acid (LiSiPA)] as dopant and ferric chloride as oxidant. Several samples were prepared by varying the amounts of MWCNTs ranging from 1 to 5 wt %. Scanning electron microscope and transmission electron microscope images clearly show a thick coating of PPy on surface of MWCNTs. The electrical conductivity of PPy increased with increasing amount of MWCNTs and maximum conductivity observed was 52 S/cm at a loading of 5 wt % of MWCNTs. Pure PPy prepared under similar conditions had a conductivity of 25 S/cm. Electromagnetic interference (EMI) shielding effectiveness (SE) also showed a similar trend and average EMI shielding of ?108 dB (3 mm) was observed for sample having 5 wt % MWCNT in the frequency range of 8.2–12.4 GHz (X‐band). The light weight and absorption dominated total SE of ?93 to ?108 dB of these composites indicate the usefulness of these materials for microwave shielding. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45370.     

Design of artificial nacre-like hybrid films as shielding to mitigate electromagnetic pollution

Multifunctional designs of biomimetic layered materials are in great demand for broadening their applications. Artificial hybrid films are fabricated using a simple evaporation-induced assembly method, using nacre as the structural model, two-dimensional reduced graphene oxide (RGO) and magnetic graphene (MG) as inorganic building blocks and poly(vinyl alcohol) (PVA) as glue. The nacre-like films exhibit good mechanical performance, such as high stiffness, strength and toughness. The biomimetic materials possess the shielding properties of electromagnetic pollution. MG based nacre-like films present more significant electromagnetic interference (EMI) shielding performance than RGO film, because of a synergism between dielectric loss of graphene and magnetic loss of magnetic nanoparticles. Average EMI shielding effectiveness (SE) reaches ∼20.3 dB over the frequency range of 8.2–12.4 GHz (X band) for MG hybrid film only 0.36 mm thick. The lightweight, flexible and thin MG artificial hybrid films possess good potential for EMI shielding applications.     

EMI shielding effectiveness of carbon based nanostructured polymeric materials: A comparative study

The microstructure, electromagnetic interference (EMI) shielding effectiveness (SE), DC electrical conductivity, AC electrical conductivity and complex permittivity of nanostructured polymeric materials filled with three different carbon nanofillers of different structures and intrinsic electrical properties were investigated. The nanofillers were multiwall carbon nanotubes (MWCNT), carbon nanofibers (CNF) and high structure carbon black (HS-CB) nanoparticles and the polymer was acrylonitrile-butadiene-styrene (ABS). In addition, the EMI SE mechanisms and the relation between the AC electrical conductivity in the X-band frequency range and the DC electrical conductivity were studied. The nanocomposites were fabricated by solution mixing and characterized by uniform dispersion of the nanofillers within the polymer matrix. It was found that, at the same nanofiller loading, the EMI SE, permittivity and electrical conductivity of the nanocomposites decreased in the following order: MWCNT > CNF > CB. MWCNT based nanocomposites exhibited the lowest electrical percolation threshold and the highest EMI SE owning to the higher aspect ratio and electrical conductivity of MWCNT compared to CNF and HS-CB. The AC conductivity in the X-band frequency range was found to be independent of frequency.     

Fabrication and electromagnetic interference shielding effectiveness of carbon nanotube reinforced carbon fiber/pyrolytic carbon composites

Carbon nanotube reinforced carbon fiber/pyrolytic carbon composites were fabricated by precursor infiltration and pyrolysis method and their electromagnetic interference shielding effectiveness (EMI SE) was investigated over the frequency range of 8.2–12.4 GHz (X-band). Carbon nanotubes (CNTs) were in situ formed through catalyzing hydrocarbon gases evaporating out of phenolic resin with nano-scaled Ni particles. The content of CNTs increased with the increase of Ni loadings (0.00, 0.50, 0.75 and 1.25 wt.%) in phenolic resin. Thermal gravimetrical analysis results showed that the carbon yield of phenolic resin increased with the addition of Ni catalyst. With the formation of CNTs, the EMI SE increased from 28.3 to 75.2 dB in X-band. The composite containing 5.0 wt.% CNTs showed an SE higher than 70 dB in the whole X-band.     

Mild functionalization of carbon nanotubes filled epoxy composites: Effect on electromagnetic interferences shielding effectiveness

The effect of nitric acid mild functionalized multiwalled carbon nanotubes (MWCNTs) on electromagnetic interference (EMI) shielding effectiveness (SE) of epoxy composites was examined. MWCNTs were oxidized by concentrated nitric acid under reflux conditions, with different reaction times. The dispersion of MWCNTs after functionalization was improved due to the presence of oxygen functional groups on the nanotubes surface. Functionalization at 2 h exhibits the highest EMI SE and electrical conductivity of MWCNTs filled epoxy composites. However, EMI shielding performance of MWCNTs filled epoxy composite declined when the functionalization reaction time was prolonged. This was due to extensive damage on the MWCNT structure, as verified by a Raman spectroscope. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42557.     

Electromagnetic interference shielding properties of polymer-grafted carbon nanotube composites with high electrical resistance

Poly(methyl methacrylate) (PMMA)-grafted multiwalled CNTs were prepared, and then dispersed into additional PMMA matrix, yielding highly insulated PMMA–CNT composites. The volume resistivity of PMMA–CNT was as high as 1.3 × 10¹⁵ Ω cm even at 7.3 wt% of the CNT. The individual CNTs electrically-isolated by the grafted PMMA chains in PMMA–CNT transmitted electromagnetic (EM) waves in the frequency range of 0.001–1 GHz, whereas the percolated CNTs in a conventional composite prepared by blending PMMA with the pristine CNTs strongly shielded the EM waves. This result suggests that the intrinsic conductivity of the CNT itself in PMMA–CNT does not contribute to the EM interference (EMI) shielding in the frequency range of 0.001–1 GHz. On the other hand, PMMA–CNT exhibited EMI shielding at the higher frequency range than 1 GHz because the dielectric loss of the CNT itself was rapidly increased over 1 GHz. At 110 GHz, PMMA–CNT with 7.3 wt% of the CNT had EMI SE of as high as 29 dB (0.57 mm thickness), though is slightly lower than that of the percolated conventional composite (35 dB). Thus, it is demonstrated that the highly insulated PMMA–CNT has the good EMI shielding at extremely high frequency range (30–300 GHz).     

The effect of surface chemistry of graphene on rheological and electrical properties of polymethylmethacrylate composites

Graphene sheets with different oxygen contents were prepared to functionalize the electrically insulating polymethylmethacrylate (PMMA). The influences of surface chemistry of graphene on rheological, electrical and electromagnetic interference (EMI) shielding properties of its PMMA composites were investigated. The appearance of frequency-independent storage modulus at low frequency suggests a solid-like viscoelastic behavior and the formation of an interconnected network of graphene in the matrix. Due to the favorable interfacial interactions arising from polarity matching, the graphene with a C/O ratio of 13.2 (graphene-13.2) shows a better dispersion in PMMA than those with lower C/O ratios, and thus its PMMA composites exhibit lower rheological and electrical percolation thresholds. The EMI shielding properties of the graphene/PMMA composites exhibit similar dependence on the oxygen content of graphene. A high EMI shielding effectiveness of ～30 dB was obtained for the PMMA composite with 4.2 vol.% of graphene-13.2 with microwave absorption as the dominant EMI shielding mechanism.     

Using a non-covalent modification to prepare a high electromagnetic interference shielding performance graphene nanosheet/water-borne polyurethane composite

We prepared flexible, lightweight, and high electromagnetic interference (EMI) shielding performance graphene nanosheet (GNS)/water-borne polyurethane (WPU) composites. WPU, with sulfonate functional groups, was used as the polymer matrix. By adsorbing the cationic surfactant (stearyl trimethyl ammonium chloride) on the surface of the GNSs (S-GNSs), restacking and aggregation of the GNSs have been efficiently suppressed, which also attracted sulfonate groups from the WPU matrix. Because of the favorable interfacial interactions arising from electrostatic attraction, the S-GNS exhibited good compatibility with the WPU matrix. Such a homogeneous dispersion contributed to the construction of an electrical conductive network. The S-GNS/WPU composite exhibited a low electrical conductivity percolation threshold and an outstanding enhanced electrical conductivity of approximately 5.1 S/m. A high EMI shielding effectiveness of approximately 32 dB was obtained by the WPU composites with contents of 5 vol.% (approximately 7.7 wt.%) S-GNSs.     

Electromagnetic interference shielding and dielectric properties of SiCf/SiC composites containing pyrolytic carbon interphase

The SiC_f/SiC composites containing various thickness of pyrolytic carbon (PyC) interphase were prepared and their properties were investigated for electromagnetic interference (EMI) shielding applications in the frequency of 8.2–12.4 GHz. The composites containing 310 nm thickness (3.3 vol%) PyC interphase show an about 25 dB shielding effectiveness in the whole frequency band. Interestingly, the contribution of reflection to the EMI shielding effectiveness increases and the contribution of absorption decreases as the PyC interphase thickness increases.     

Dielectric,electromagnetic absorption and interference shielding properties of porous yttria-stabilized zirconia/silicon carbide composites

SiC was infiltrated into porous yttria-stabilized zirconia (YSZ) felt by chemical vapor infiltration (CVI), and continuous SiC matrix layer was formed around YSZ fibre. When 86.9 wt.% SiC is introduced into the porous YSZ felt, the mean values of the real part of the permittivity and dielectric loss tangent of porous YSZ felt increase from 1.16 and 0.007 to 8.2 and 1.31, respectively. The electromagnetic interference (EMI) shielding efficiency (SE) increases from 0.069 dB to 16.2 dB over the frequencies ranging from 8.2 GHz to 12.4 GHz. The reflection loss of the composites with a thickness of 5 mm at 8–18 GHz is smaller than ?6.5 dB, and the bandwidth below ?10 dB is 5 GHz at room temperature, which increases to 5.9 GHz at 800 °C. The considerable increases in EMI SE and microwave absorption properties are attributed to the formation of continuous SiC matrix layer composed of SiC nanocrystals in the porous YSZ felt, which is beneficial for the production of induced electric current and the enhancement of dielectric loss.     

Probing the engineered sandwich network of vertically aligned carbon nanotube–reduced graphene oxide composites for high performance electromagnetic interference shielding applications

Herein, we developed a strategy for fabrication of iron oxide infiltrated vertically aligned multiwalled carbon nanotubes (MWCNT forest) sandwiched with reduced graphene oxide (rGO) sheets network for high performance electromagnetic interference (EMI) shielding application which offers a new avenue in this area. Such engineered sandwiched network exhibits enhanced shielding effectiveness compared to conventional EMI shielding materials. This network of exotic carbons demonstrates the shielding effectiveness value more than 37 dB (>99.98% attenuation) in Ku-band (12.4–18 GHz), which is greater than the recommended limit (∼30 dB) for techno-commercial applications.     

Hydrophilic modification of polyacrylonitrile membranes by oxyfluorination

The surface of polyacrylonitrile (PAN) membranes was modified by oxyfluorination with various conditions to improve its wettability. The membranes were characterized in terms of morphology, structure, hydrophilicity, and membrane performance. The properties and functional groups on the surface of PAN membranes were investigated by contact angle, SEM, ATR-IR and XPS. And permeability of PAN membranes was compared by permeating pure water flux through membrane surface under 100, 150 and 200 kPa pressure. Oxyfluorination introduced oxygen contained functional groups such as the carboxylic acid groups that help increment of wettability on the surface of PAN membrane. Water flux of oxyfluorinated PAN UF membrane increased 20% at pure water permeation pressure 200 kPa compared to that of untreated PAN UF membrane.     

Theoretical and experimental studies on EMI shielding mechanisms of multi-walled carbon nanotubes reinforced high performance composite nanofibers

Electrically conductive composite nanofibers of polyvinylpyrrolidone (PVP) filled with multi-walled carbon nanotubes (MWCNTs) were prepared by electrospinning process. The complex permittivity and electromagnetic interference shielding effectiveness (EMI SE) of all composite nanofibers were measured in the X band frequency range 8.2–12.4 GHz. The electrical conductivity, real and imaginary part of permittivity, and EMI shielding behaviors of the composite nanofibers were reported as function of MWCNTs concentration. Electrical conductivity of MWCNTs/PVP composite nanofiber followed power law model of percolation theory having a percolation threshold ?_c = 0.72 vol% (~1 wt.%) and exponent t = 1.71. The total EMI SE of MWCNTs/PVP composite nanofibers increased up to 42 dB mainly base on the absorption mechanism. The EMI SE measured from experiments was also compared with the approximate value calculated from theoretical model. The obtained theory results confirmed that the selected model presented acceptable performance for evaluating the involved parameters and prediction of the EMI SE of composite nanofibers. The ability of the theoretical model to predict the EMI shielding by reflection and absorption was found to be a function of the frequency, thickness, permittivity, and conductivity.     

Microstructures and EMI shielding properties of composite ceramics reinforced with carbon nanowires and nanowires-nanotubes hybrid

Carbon/ceramic composites are promising candidates as electromagnetic interference (EMI) shielding materials used at various harsh environments. The aim of present work is to prepare and investigate two kinds of composite ceramics reinforced with carbon nanowires (CNWs) and nanowires-nanotubes (CNWs-CNTs) hybrid, respectively. Results indicate that CNWs is highly curved and multi-defected, and CNWs-CNTs hybrid shows the best crystal structure at an optimal catalyst concentration of 5 wt%. When CNWs accounts for 5.15 wt%, the total shielding effectiveness (SE) of CNWs/Si₃N₄ reaches 25.0 dB with absorbed SE of 21.3 dB, meaning that 99.7% incident signal can be blocked, while it reaches 25.4 dB for CNWs-CNTs/Si₃N₄ as the carbon loading only increasing to 3.91 wt%. By contrast, CNWs/Si₃N₄ exhibits better electromagnetic attenuation capability with stronger absorption, mainly due to the unique microstructure of CNWs. Both of two composite ceramics have great potential to be designed as structural and multi-functional materials.     

Improved dielectric and electromagnetic interference shielding properties of ferrocene-modified polycarbosilane derived SiC/C composite ceramics

In order to enhance the dielectric and electromagnetic interference shielding (EMI) properties, the SiC/C composite ceramics were fabricated by pyrolysis of ferrocene-modified polycarbosilane. The microstructure evolutions, dielectric properties, EMI and microwave absorption properties of SiC/C composite ceramics were investigated. The increases of both ferrocene contents and annealing temperatures led to the increases of crystallizations of SiC and carbons. Crystallized carbons including carbon nanowires, turbostratic carbons, onion-like carbons and graphene-like carbons were obtained in the materials. The carbon nanowires were longest when the 5 wt.% ferrocene-modified polycarbosilane was annealed at 1250 °C. These carbons played a more important role than SiC in the increases of dielectric and EMI properties. The average real and imaginary permittivities of materials increased from 4.4 and 0.7 to 38.9 and 39.6, respectively. The materials exhibited high total shielding effectiveness, high absorption shielding effectiveness and low reflection shielding effectiveness, which were 36.6, 30.1 and 6.5 dB, respectively.     

Fabrication and electromagnetic interference shielding effectiveness of Ti3Si(Al)C2 modified Al2O3/SiC composites

A dense alumina fiber reinforced silicon carbide matrix composites (Al₂O₃/SiC) modified with Ti₃Si(Al)C₂ were prepared by a joint process of chemical vapor infiltration, slurry infiltration and reactive melt infiltration. The conductive Ti₃Si(Al)C₂ phase introduced into the matrix modified the microstructure of Al₂O₃/SiC. The refined microstructure was composed of conductive phase, semiconductive phase and insulating phase, which led to admirable electromagnetic shielding properties. Electromagnetic interference shielding effectiveness (EMI SE) of Al₂O₃/SiC and Ti₃Si(Al)C₂ modified Al₂O₃/SiC were investigated over the frequency range of 8.2–12.4 GHz. The EMI SE of Al₂O₃/SiC-Ti₃Si(Al)C₂ exhibited a significant increase from 27.6 to 42.1 dB compared with that of Al₂O₃/SiC. The reflection and absorption shielding effectiveness increased simultaneously with the increase of the electrical conductivity.