磁性聚合物微球在Cr(VI)吸附分离中的应用(英文)

The magnetic poly-(methacrylate-divinyl benzene) microspheres with micron size were synthesized by modified suspension polymerization method.Adsorption of Cr(VI) from aqueous solution by magnetic poly-(MA-DVB) microspheres with surface amination was investigated.The adsorption processes were carried out under diversified conditions of pH value,adsorption time and temperature to evaluate the performance of the mag-netic microspheres.The optimum pH value for Cr(VI) adsorption was found as 3.The adsorption capacity increased with adsorption time and attained an optimum at 60 min.The adsorption processes for magnetic microspheres was endothermic reaction,and the adsorption capacity increased with increasing temperature.     

分散聚合法合成含有环氧基的无孔超顺磁性微球及其表征

Non-porous superparamagnetic polymer microspheres with epoxy groups were prepared by dispersion polymerization of glycidyl methacrylate (GMA) in the presence of magnetic iron oxide (Fe3O4) nanoparticles coated with oleic acid. The polymerization was carried out in the ethanol/water medium using polyvinylpyrrolidone (PVP) and 2,2'-azobisisobutyronitrile (AIBN) as stabilizer and initiator, respectively. The magnetic microspheres obtained were characterized with scanning electron microscopy (SEM), vibrating sample magnetometry (VSM) and Fourier transform infrared spectroscopy (FTIR). The results showed that the magnetic microspheres had an average size of 1μm with superparamagnetic characteristics. The saturation magnetization was found to be 4.5emu·g-1. There was abundance of epoxy groups with density of 0.028 mmol·g-1 in microspheres. The magnetic PGMA microspheres have extensive potential uses in magnetic bioseparation and biotechnology.     

Efficient adsorption to hexavalent chromium by iron oxalate modified D301:Characterization,performance and mechanisms

Chromium is a common harmful pollutant with high toxicity and low bearing capacity of soil and water. Excellent salinity resistance, a wide p H range, and high regeneration capacity were essential for qualified adsorbents used in removing hexavalent chromium(Cr(VI)) from polluted water. Herein, iron oxalate modified weak basic resin(IO@D301) for the removal of Cr(VI) was prepared by the impregnation method. The IO@D301 was characterized by scanning electron microscope(SEM), Fourier transform infrared spectroscopy(FTIR), X-Ray diffraction(XRD)and X-ray photoelectron spectroscopy(XPS). Owing to abundant amine, carboxyl groups and iron ions existing on the surface, IO@D301 possesses high adsorption and salinity resistance capacity for Cr(VI). The maximum adsorption capacity of IO301 towards Cr(VI) reached 201.30 mg·g~(-1) at 293 K and a p H of 5. The adsorption equilibrium was well fitted by the Freundlich model, and the adsorption process was described by the pseudofirst-order kinetics model as spontaneous and exothermic. The mechanism may be identified as electrostatic attraction, coordination, and reduction, which was confirmed by FT-IR and X-ray photoelectron spectroscopy.     

Characteristics of Amine Surfactant Modified Peanut Shell and Its Sorption Property for Cr（VI）

Modified peanut shell （MPS） was prepared by amination reaction with peanut shell （PS） as the starting material The sorption of Cr（VI） oxyanions on MPS in static and column tests were investigated. In addition, the sorption isotherm and kinetic models were applied to confirm the sorption capacity and the sorption mechanisms. BET surface area anysis showed the physicochemical characterist!cs of the samples. The results of zeta potential,Fourier transform infrared （FT-IR） and Raman spectra analysis illustrated that chemical adsorption and ion exi change are the potential sorption mechanism. The static sorption test showed that the maximum sorption capacity （qm） of MPS for Cr（VI） increased with temperature, which indicated that the Cr（VI） sorption rocess was endothermic. The saturated sorption capacity of Cr（VI） in the colunm sorption test was 138.34 mg.g-1, which accounted for 93.9% of the qmax at 25 ℃. The regeneration capacity of MPS was evaluated using HC1 solution as an eluent. The high regeneration efficiency （82.6%） validated the dominance of the ion exchange mechanism in the Cr（VI） sorption process with C1ions displacing Cr（VI） oxyanion on MPS. The Langmuir isotherm model showed a higher correlation coefficient than the other adsorption isotherm models. And in the kinetic study, a pseudo-second-order model fit the data best.     

Modified activated carbons with amino groups and their copper adsorption properties in aqueous solution

Activated carbons were prepared by two chemical methods and the adsorption of Cu (II) on activated carbons from aqueous solution containing amino groups was studied. The first method involved the chlorination of activated carbon following by substitution of chloride groups with amino groups, and the second involved the nitrilation of activated carbon with reduction of nitro groups to amino groups. Resultant activated carbons were characterized in terms of porous structure, elemental analysis, FTIR spectroscopy, XPS, Boehm titration, and pHzpc. Kinetic and equilibrium tests were performed for copper adsorption in the batch mode. Also, adsorption mechanism and effect of pH on the adsorption of Cu (II) ions were discussed. Adsorption study shows enhanced adsorption for copper on the modified activated carbons, mainly by the presence of amino groups, and the Freundlich model is applicable for the activated carbons. It is suggested that binding of nitrogen atoms with Cu (II) ions is stronger than that with H+ions due to relatively higher divalent charge or stronger electrostatic force.     

用于清除胆红素的磁性亲和分离方法

An affinity adsorbent, Cibacron Blue 3GA immobilized magnetic polyvinyl alcohol (PVA) microspheres was used for bilirubin removal taking the advantage of easy separation of magnetic sorbent from the biosystem.Fe3 O4 superparamagnetic particles was synthesized with hydrothermal reaction of ferrous chloride (FeC12) and ferric chloride (FeCl3). Such magnetic particles are then encapsulated in biocompatible PVA to form magnetic polymer microspheres sized from 2 to 15 nm with hydroxyl groups on its surface. Cibacron Blue 3GA, a dye-ligand, was covalently coupled with the polyvinyl alcohol through the nucleophilic reaction between the chloride of its triazine ring and the hydroxyl groups of PVA molecules under alkaline condition. The affinity adsorbent carried 21.1μmol Cibacron Blue 3GA per gram magnetic polymer microspheres was used to remove unconjugated and conjugated bilirubin from the solution which was composed of bilirubin or bilirubin and protein. After the adsorption, the adsorbent loaded with bilirubin was removed easily in the magnetic field.     

ADSORPTION OF H_2PtCl_6 ON ALUMINA

The adsorption kinetics and equilibrium of H_2PtCl_6 on various types of alumina were studied,and IRSand DRS were used to characterize these supports before and after impregnating with H_2PtCl_6 solution.Thedata indicated that the uptake of H_2PtCl_6 on supports strongly depends on the Lewis acidity of alumina andthat the adsorption rate is controlled by pore diffusion for supports of high adsorption capacity.Relationshipbetween uptake and acidity is interpreted in terms of active hydroxyl groups on alumina.     

Fabrication of chitosan microspheres for efficient adsorption of methyl orange

In this article, morphology, structure and size controllable chitosan microspheres with high mechanical strength were synthesized by microfluidic technology combining chemical crosslinking and used as an adsorbent for methyl orange. The synthesized adsorbents were characterized using scanning electron microscopy(SEM),Fourier transform infrared spectroscopy(FTIR), and an Energy Dispersive Spectrometer(EDS). The effect of pH revealed that the adsorption process depended on pH and the pH variation of methyl orange solution after adsorption indicated that adsorption capacity was affected through the associated role of chitosan nature and pH variation. Experimental results suggested that the as-prepared chitosan microspheres were controlled within a narrow size distribution(coefficients of variation is 1.81%), whose adsorption capacity reached to 207 mg·g~(-1) and mechanical strength was suitable to resist forces. In addition, the adsorption isotherm was well fitted with the Langmuir model, and the adsorption kinetic was best described by the pseudo-second-order kinetic model.The high performance microfluidic-synthesized chitosan microspheres have promising potentials in the applications of removing dyes from wastewater.     

Removal of chromium (Ⅵ) from aqueous solutions using quaternized chitosan microspheres

In this study, quaternized chitosan microspheres(QCMS) were prepared and its Cr(VI) removal potential was investigated. Batch experiments were conducted to examine kinetics, adsorption isotherm, p H effect,and thermodynamic parameters. Equilibrium was attained within 50 min and maximum removal of 97.34%was achieved under the optimum conditions at p H 5. Adsorption data for Cr(VI) uptake by the QCMS were analyzed according to Langmuir, Freundlich, and Temkin adsorption models. The maximum uptake of Cr(VI)was 39.1 mg·g~(-1). Thermodynamic parameters for the adsorption system were determinated at 293 K, 303 K,313 K and 323 K.(ΔH° = 16.08 k J·mol~(-1);ΔG° =- 5.84 to- 8.08 k J·mol~(-1)and ΔS° = 74.81 J·K~(-1)·mol~(-1)).So the positive values of both ΔH° and ΔS° suggest an endothermic reaction and increase in randomness at the solid–liquid interface during the adsorption. ΔG° values obtained were negative indicating a spontaneous adsorption process. The kinetic process was described by a pseudo-second-order rate equation very well. The results of the present study indicated that the QCMS could be considered as a potential adsorbent for Cr(VI) in aqueous solutions.     

Peanut Shell Activated Carbon： Characterization,Surface Modification and Adsorption of Pb^2＋ from Aqueous Solution

Metal ion contamination of drinking water and waste water, especially with heavy metal ion such as lead, is a serious and ongoing problem. In this work, activated carbon prepared from peanut shell （PAC） was used for the removal of Pb^2＋ from aqueous solution. The impacts of the Pb25 adsorption capacities of the acid-modified carbons oxidized with HNO3 were also investigated. The surface functional groups of PAC were confirmed by Fourier transform infrared （FTIR） spectroscopy, X-ray photoelectron spectroscopy （XPS）, Boehm titration. The textural properties （surface area, total pore volume） were evaluated from the nitrogen adsorption isotherm at 77 K. The experimental results presented indicated that the adsorption data fitted better with the Langmuir adsorption model. A comparative study with a commercial granular activated carbon （GAC） showed that PAC was 10.3 times more efficient compared to GAC based on Langmuir maximum adsorption capacity. Further analysis results by the Langmuir equation showed that HNO3 [20% （by mass）] modified PAC has larger adsorption capacity of Pb^2＋ from aqueous solution （as much as 35.5 mg·g^-1）. The adsorption capacity enhancement ascribed to pore widening, increased cation-exchange capacity by oxygen groups, and the promoted hydrophilicity of the carbon surface.     

Enhanced adsorptive removal of Cr(VI) in aqueous solution by polyethyleneimine modified palygorskite

Polyethyleneimine (PEI) modified palygorskite (Pal) was used for the adsorption of Cr(VI) in aqueous solution. The absorbent was characterized by Fourier transform infrared spectroscopy (FT-IR) and thermogravimetric analysis (TGA). Characterized results confirmed that the Pal has been successfully modified by PEI. The modification of PEI increased the Cr(VI) adsorption performance of the Pal by the adsorption combined reduction mechanism, and amino groups of the adsorbent play the main role in the enhanced Cr(VI) adsorption. The maximum adsorption capacity was 51.10 mg·g^-1 at pH 4.0 and 25 ℃. The adsorption kinetics of Cr(VI) on the adsorbent conforms to the Langmuir isotherm model. The maximum adsorption occurs at pH 3, and then the adsorption capacity of PEI-Pal was decreased with the increase of pH values. The adsorption kinetics of Cr(VI) on PEI-Pal was modeled with pseudo-second-order model. The addition of Cl^-, SO₄^2- and PO₄^3- reduced the Cr(VI) adsorption by competition with Cr(VI) for the active sites of PEI-Pal. The Cr(VI) saturated PEI-Pal can be regenerated in alkaline solution, and the adsorption capacity can still be maintained at 30.44 mg·g^-1 after 4 cycles. The results demonstrate that PEI-Pal can be used as a potential adsorbent of Cr(VI) in aqueous solutions.     

Removal of chromium (VI) from aqueous solutions using quaternized chitosan microspheres

In this study, quaternized chitosan microspheres (QCMS) were prepared and its Cr(VI) removal potential was investigated. Batch experiments were conducted to examine kinetics, adsorption isotherm, pH effect, and thermodynamic parameters. Equilibrium was attained within 50 min and maximum removal of 97.34% was achieved under the optimum conditions at pH 5. Adsorption data for Cr (VI) uptake by the QCMS were analyzed according to Langmuir, Freundlich, and Temkin adsorption models. The maximum uptake of Cr(VI) was 39.1 mg·g^-1. Thermodynamic parameters for the adsorption system were determinated at 293 K, 303 K, 313 K and 323 K. (ΔH°=16.08 kJ·mol^-1;ΔG°=-5.84 to -8.08 kJ·mol^-1 and ΔS°=74.81 J·K^-1·mol^-1). So the positive values of both ΔH° and ΔS° suggest an endothermic reaction and increase in randomness at the solid-liquid interface during the adsorption.ΔG° values obtainedwere negative indicating a spontaneous adsorption process. The kinetic process was described by a pseudo-second-order rate equation very well. The results of the present study indicated that the QCMS could be considered as a potential adsorbent for Cr (VI) in aqueous solutions.     

Removal of Cd（II） by Nanometer AIO（OH） Loaded on Fiberglass with Activated Carbon Fiber Felt as Carrier

A new nanometer material, nanometer AlO（OH） loaded on the fiberglass with activated carbon fibers felt（ACF） as the carrier, was prepared by hydrolytic reaction for the removal of Cd（II） from aqueous solution using column adsorption experiment. As was confirmed by XRD determination, the hydrolysis production loaded on fiberglass was similar to the orthorhombic phase AlO（OH）. SEM images showed that AlO（OH） particles were in the form of small aggregated clusters. The Thomas model was applied for estimating the kinetic parameters and the saturated adsorption ability of Cd（II） adsorption on the new adsorbent. The results showed that the maximum adsorption capacity of Cd（II） was 128.50 mg·g^-1 and 117.86 mg·g^-1 for the adsorbent mass of 0.3289 g and the adsorbent mass of 0.2867 g, respectively. The elution experiment result indicated that the adsorbed Cd ions was easily desorbed from the material with 0.1 mol·L^-1 HCl solution. Adsorption-desorption cycles showed the feasibility of repealed uses of the composited material. The adsorption capacities were influenced by pH and the initial Cd（II） concentration. The amount adsorbed was greatest at pH 6.5 and the initial Cd（II） concentration of 0.07 mg·L^-1, respectively. Nanometer AlO（OH） played a major role in the adsorption process, whereas the fiberglass and ACF were assistants in the process of removing Cd（II）. In addition, the adsorption capacities for Cd（II） were obviously reduced from 128.50 mg·L^-1 to 64.28 mg·L^-1 when Pb ions were present because Pb ions took up more adsorption sites.     

污泥含炭吸附剂的制备及其吸附模拟烟气中汞蒸汽的应用(英文)

The carbonaceous adsorbent was prepared from mixtures of dewatered sludge and sawdust with enhanced ZnCl2 chemical activation.Characteristics of the adsorbent were studied using scanning electron microscope(SEM) ,Fourier transform infrared spectroscopy(FT-IR) ,and adsorption of nitrogen.The surface analysis showed that the carbonaceous adsorbent had good specific surface and porosity(394 m 2 ·g-1of BET surface,0.12 and 0.10 ml·g-1of microporous and mesoporous volume,respectively) .The oxygen functional groups such as OH,C O and C O were found on the surface by FTIR and XPS(X-ray photoelectron spectroscopy) .The adsorption of elemental mercury(Hg0) on the carbonaceous adsorbent was studied in a fixed bed reactor.The dynamic adsorption capacity of carbonaceous adsorbent increased with influent mercury concentration,from 23.6μg·g-1at 12.58μg·m-3to 87.9μg·g-1at 72.50μg·m-3,and decreased as the adsorption temperature increased,from 246 μg·g-1 at 25°C to 61.3μg·g-1 at 140°C,when dry nitrogen was used as the carrier gas.The carbonaceous adsorbent presented higher dynamic adsorption capacity than activated carbon,which was 81.2μg·g-1and 53.8μg·g-1respectively.The adsorption data were fitted to the Langmuir adsorption model.The physical and chemical adsorption were identified on the adsorbent.     

Removal of hexavalent chromium in soil by lignin-based weakly acidic cation exchange resin

The adsorption of Cr(VI) from soil onto lignin-based weakly acidic cation exchange resin (LBR) has been investigated. Lignin is a three-dimensional amorphous polymer composed of methoxylated phenylpropane units. The unique structure and chemical properties render the lignin suitable for the remediation of hexavalent chromium in the soil. Soil column leaching experiments were conducted to optimize the adsorption conditions. The effects of contact time, pH, adsorbent dosage and temperature on the adsorption of Cr(VI) onto the LBR have been investigated. Experiment data were then correlated with Freundlich and Langmuir isotherms. The Langmuir isotherm model fits the experimental data better than the Freundlich isotherm. It was found that the LBR has a high adsorption capability for Cr(VI) (3.95 mg·g^-1) with a removal rate of 91.9%. Thus, LBR can serve as a good absorbent for the reduction of the concentration of Cr(VI) in soil.     

Mechanically activated starch magnetic microspheres for Cd(Ⅱ) adsorption from aqueous solution

Magnetic starch microspheres(AAM-MSM) were synthesized via an inverse emulsion graft copolymerization by using mechanically activated cassava starch(MS) as a crude material, acrylic acid(AA) and acrylamide(AM) as graft copolymer monomers, and methyl methacrylate(MMA) as the dispersing agent and used as an adsorbent for the removal of Cd(II) ions from aqueous solution. Fourier-transform infrared spectroscopy(FT-IR), X-ray photoelectron spectroscopy(XPS), scanning electron microscopy(SEM), and vibrating sample magnetometry(VSM) were used to characterize the AAM-MSM adsorbent. The results indicated that AA, AM, and MMA were grafted to the MS, and the Fe_3 O_4 nanoparticles were encapsulated in the AAM-MSM adsorbent microspheres.The adsorbent exhibited a smooth surface, uniform size, and good sphericity because of the addition of the MMA and provided more adsorption sites for the Cd(II) ions. The maximum adsorption capacity of Cd(II) on the AAM-MSM was 39.98 mg·g~(-1). The adsorbents were superparamagnetic, and the saturation magnetization was 16.7 A·m~2·kg~(-1). Additionally, the adsorption isotherms and kinetics of the adsorption process were further investigated. The process of Cd(II) ions adsorbed onto the AAM-MSM could be described more favorably by the pseudo-second-order kinetic and Langmuir isothermal adsorption models, which suggested that the chemical reaction process dominated the adsorption process for the Cd(II) and chemisorption was the rate-controlling step during the Cd(II) removal process.     

Superior adsorption performance of graphitic carbon nitride nanosheets for both cationic and anionic heavy metals from wastewater

Water pollution caused by highly toxic Cd(II), Pb(II), and Cr(VI) is a serious problem. In the present work,a green and low-cost adsorbent of g-C_3N_4 nanosheets was developed with superior capacity for both cationic and anionic heavy metals. The adsorbent was easily fabricated through one-step calcination of guanidine hydrochloride with thickness less than 1.6 nm and specific surface area of 111.2 m~2·g~(-1). Kinetic and isotherm studies suggest that the adsorption is an endothermic chemisorption process, occurring on the energetically heterogeneous surface based on a hybrid mechanism of multilayer and monolayer adsorption. The tri-s-triazine units and surface N-containing groups of g-C_3N_4 nanosheets are proposed to be responsible for the adsorption process.Further study on pH demonstrates that electrostatic interaction plays an important role. The maximum adsorption capacity of Cd(II), Pb(II), and Cr(VI) on g-C_3N_4 nanosheets is 123.205 mg·g~(-1), 136.571 mg·g~(-1),and 684.451 mg·g~(-1), respectively. The better adsorption performance of the adsorbent than that of the recently reported nanomaterials and low-cost adsorbents proves its great application potential in the removal of heavy metal contaminants from wastewater. The present paper developed a promising adsorbent which will certainly find applications in wastewater treatment and also provides guiding significance in designing adsorption processes.     

赤泥/煤基铁炭材料的制备及其脱除废水Cr(Ⅵ)的性能

以脱钠赤泥、粉状褐煤为原料,羧甲基纤维素钠为黏结剂,采用碳热还原法制备了可替代商业铁炭微电解填料的廉价铁炭材料,用于去除废水中的Cr（Ⅵ）。考察了不同的制备参数（炭化温度、炭化时间、赤泥/煤质量比）和吸附条件（溶液pH、浓度）,以提升Cr（Ⅵ）去除效果。结果表明质量比（赤泥/煤）为1/3、800℃炭化1h的赤泥/煤基铁炭材料,可达到最大Cr（Ⅵ）吸附量（4.03 mg·g^-1）、最低铁溶出量（< 0.19 mg·g^-1）和最大比吸附量（12.97 mg·g^-1,由Langmuir吸附等温线模型算出）。赤泥/煤基铁炭材料对Cr （Ⅵ）的吸附等温线符合Freundlich方程,其吸附动力学可用准一级或准二级动力学方程来描述。多种表征（XRD、XRF、BET和SEM等）结果进一步表明赤泥/煤基铁炭材料比商业铁炭填料具有更高的铁还原度、更大的比表面积和孔容以及更好的颗粒分散度,使其具有更好的Cr（Ⅵ）的去除效果。     

氨基功能化聚苯乙烯纳米微球的制备及其CO2吸附性能研究

以苯乙烯(St)和甲基丙烯酸缩水甘油酯(GMA)为共聚单体,通过细乳液聚合法制备出聚苯乙烯纳米微球,并研究了单体配比与反应条件对纳米微球粒径大小与分布的影响。然后利用GMA上的活性环氧基团将有机胺接枝到纳米微球表面,并将其应用于CO2吸附。采用动态激光散射、扫描电子显微镜、红外光谱、元素分析等方法对纳米微球进行了结构表征。结果表明,所制备的纳米微球最小粒径为67 nm,粒径大小均一可控,而且纳米微球表面成功地接枝上有机胺;乙二胺改性纳米微球的CO2吸附量为2.45 mmol/g,并且吸附循环稳定性较好。