Immobilized enzyme-linked DNA-hybridization assay with electrochemical detection for Cryptosporidium parvum hsp70 mRNA

An electrochemical enzyme-linked immobilized DNA-hybridization assay for the detection of Cryptosporidium parvum in water has been developed. The target molecule was a 121-nucleotide sequence from the C. parvum heat shock protein 70 (hsp70 mRNA from U71181 gene). This analyte offers the possibility of distinguishing dead from live oocysts. The assay involves covalent attachment of a primary DNA probe via its 5'-amine-terminus to self-assembled monolayers of mercaptoundecanoic acid to a gold surface. The primary DNA probe was used to capture the target (sequence 1039-1082 of U71181 gene for the mRNA), by hybridization to a 20-base complementary sequence on the target (at sequence 1063-1082). A secondary DNA probe labeled with alkaline phosphatase (AP) was then hybridized to base sequence 1039-1062 on the target. p-Aminophenol, which is enzymatically generated by the immobilized AP from p-aminophenyl phosphate (PAPP), is detected using electrochemistry. The peak current of cyclic voltammograms from a PAPP solution, in which gold-coated silicon wafer modified with the complete assembly of the assay components was incubated, is linear with concentration of the target (5-50 microg/mL, where P1 and P2-AP concentrations are 50 microg/mL). A detection limit of 2 microg/mL (or 146 nM) of the DNA target was obtained. Cross-reactivity tests showed high selectivity for heat-shocked C. parvum. No signal was obtained for either the synthetic DNA for hsp70 of Campylobacter lari, Escherichia coli, Giardia lamblia, Salmonella typhimurium, and Listeria monocytogenes or for the products of heat-shocked whole organisms of E. coli, G. lamblia, Staphylococcus aureus, and Cryptosporidium muris.     

Electrochemical biosensor for detection of BCR/ABL fusion gene using locked nucleic acids on 4-aminobenzenesulfonic acid-modified glassy carbon electrode

In this study, an electrochemical DNA biosensor was developed for detection of the breakpoint cluster region gene and the cellular abl (BCR/ABL) fusion gene in chronic myelogenous leukemia by using 18-mer locked, nucleic acid-modified, single-stranded DNA as the capture probe. The capture probe was covalently attached on the sulfonic-terminated aminobenzenesulfonic acid monolayer-modified glassy carbon electrode through the free amines of DNA bases based on the acyl chloride cross-linking reaction. The covalently immobilized capture probe could selectively hybridize with its target DNA to form double-stranded DNA (dsDNA) on the LNA/4-ABSA/GCE surface. Differential pulse voltammetry was used to monitor the hybridization reaction on the capture probe electrode. The decrease of the peak current of methylene blue, an electroactive indicator, was observed upon hybridization of the probe with the target DNA. The results indicated that, in pH 7.0 Tris-HCl buffer solution, the peak current was linear with the concentration of complementary strand in the range of 1.0 x 10 (-12)1.1 x 10 (-11) M with a detection limit of 9.4 x 10 (-13) M. This new method demonstrates its excellent specificity for single-base mismatch and complementary dsDNA after hybridization, and this probe has been used for assay of PCR real sample with satisfactory results.     

Signal amplification of graphene oxide combining with restriction endonuclease for site-specific determination of DNA methylation and assay of methyltransferase activity

Site-specific identification of DNA methylation and assay of MTase activity are important in determining specific cancer types, providing insights into the mechanism of gene repression, and developing novel drugs to treat methylation-related diseases. This work reports an electrochemical method for gene-specific methylation detection and MTase activity assay using HpaII endonuclease to improve selectivity and employing signal amplification of graphene oxide (GO) to enhance the assay sensitivity. The method was developed by designing a probe DNA, which was immobilized on electrode surface, to hybridize with target DNA (one 137 mer DNA from exon 8 promoter region of the Homo sapiens p53 gene, was extracted from HCT116 cells). The assay is based on the electrochemical responses of the reporter (thionine), which was conjugated to 3'-terminus of the probe DNA via GO, after the DNA hybrid was methylated (under catalysis of M.SssI MTase) and cleaved by HpaII endonuclease (a site-specific endonuclease recognizing the duplex symmetrical sequence of 5'-CCGG-3' and catalyzing cleavage between the cytosines). This model can determine DNA methylation at the site of CpG and has an ability to discriminate the target DNA sequence from even single-base mismatched sequence. The electrochemical signal has a linear relationship with M.SssI activities ranging from 0.1 to 450 U/mL with a detection limit of ～(0.05 ± 0.02) U/mL at a signal/noise of 3. The advantages of this assay are ease of performance having a good specificity and selectivity. In addition, we also demonstrate the method can be used for rapid evaluation and screening of the inhibitors of MTase and has a potential application in discovery of new anticancer drugs.     

Cantilever-based optical deflection assay for discrimination of DNA single-nucleotide mismatches

Characterization of single-nucleotide polymorphisms is a major focus of current genomics research. We demonstrate the discrimination of DNA mismatches using an elegantly simple microcantilever-based optical deflection assay, without the need for external labeling. Gold-coated silicon AFM cantilevers were functionalized with thiolated 20- or 25-mer probe DNA oligonucleotides and exposed to target oligonucleotides of varying sequence in static and flow conditions. Hybridization of 10-mer complementary target oligonucleotides resulted in net positive deflection, while hybridization with targets containing one or two internal mismatches resulted in net negative deflection. Mismatched targets produced a stable and measurable signal when only a four-base pair stretch was complementary to the probe sequence. This technique is readily adaptable to a high-throughput array format and provides a distinct positive/negative signal for easy interpretation of oligonucleotide hybridization.     

Redox polymer and probe DNA tethered to gold electrodes for enzyme-amplified amperometric detection of DNA hybridization

The detection of nucleic acids based upon recognition surfaces formed by co-immobilization of a redox polymer mediator and DNA probe sequences on gold electrodes is described. The recognition surface consists of a redox polymer, [Os(2,2'-bipyridine)2(polyvinylimidazole)(10)Cl](+/2+), and a model single DNA strand cross-linked and tethered to a gold electrode via an anchoring self-assembled monolayer (SAM) of cysteamine. Hybridization between the immobilized probe DNA of the recognition surface and a biotin-conjugated target DNA sequence (designed from the ssrA gene of Listeria monocytogenes), followed by addition of an enzyme (glucose oxidase)-avidin conjugate, results in electrical contact between the enzyme and the mediating redox polymer. In the presence of glucose, the current generated due to the catalytic oxidation of glucose to gluconolactone is measured, and a response is obtained that is binding-dependent. The tethering of the probe DNA and redox polymer to the SAM improves the stability of the surface to assay conditions of rigorous washing and high salt concentration (1 M). These conditions eliminate nonspecific interaction of both the target DNA and the enzyme-avidin conjugate with the recognition surfaces. The sensor response increases linearly with increasing concentration of target DNA in the range of 1 x 10(-9) to 2 x 10(-6) M. The detection limit is approximately 1.4 fmol, (corresponding to 0.2 nM of target DNA). Regeneration of the recognition surface is possible by treatment with 0.25 M NaOH solution. After rehybridization of the regenerated surface with the target DNA sequence, >95% of the current is recovered, indicating that the redox polymer and probe DNA are strongly bound to the surface. These results demonstrate the utility of the proposed approach.     

Detection of six single-nucleotide polymorphisms associated with rheumatoid arthritis by a loop-mediated isothermal amplification method and an electrochemical DNA chip

An electrochemical DNA chip using an electrochemically active intercalator and DNA probe immobilized on a gold electrode has been developed for genetic analysis. In this study, the six polymorphisms associated with rheumatoid arthritis (RA), N-acetyltransferase2 (NAT2) gene polymorphisms T341C, G590A, and G857A, methylenetetrahydrofolate reductase (MTHFR) gene polymorphisms C677T and A1298C, and serum amyloid A1 (SAA1) gene promoter polymorphism C-13T were simultaneously detected by the electrochemical DNA chip and the loop-mediated isothermal amplification (LAMP) method, which is a novel technique for DNA amplification. Human genomic DNAs were extracted from blood, and the targets containing the six polymorphisms were amplified by the LAMP method. A sample containing the six LAMP products was reacted with the electrochemical DNA chip using a DNA detection system that controls hybridization reaction, washing, electrochemical detection, and data analysis automatically. A total of 31 samples were genotyped by this method, and the results were completely consistent with those determined by the polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) analysis or the PCR direct sequence analysis. The time required for this method was only 2 h, and operations were very simple. Therefore, this method is expected to contribute to personalized medicine based on genotype.     

Bulk acoustic wave affinity biosensor for genetically modified organisms detection

Bulk acoustic waves have been applied as affinity sensors. In particular, a nucleic acid sensor for hybridization studies has been developed and applied for detecting DNA target sequences in solution. A DNA probe is immobilized on the sensor surface while the target sequence is free in solution; the interaction between the two complementary strands (hybridization) is followed in real-time, without the use of any label. The system has been applied to analytical problems, i.e., genetically modified organisms (GMOs) detection. The probe was complementary to characteristic DNA sequences present in GMOs. The probe sequences were internal to the sequence of 35S promoter and Nos terminator that are inserted sequences in the genome of the GMO regulating the transgene expression. Two different probe immobilization procedures were characterized to improve the performances of a piezoelectric crystal DNA sensor for GMOs detection: 1) thiol-dextran-streptavidin-biotin procedure and 2) thiol-derivatized probe and blocking thiol procedure. The system has been optimized using synthetic oligonucleotides. The probe immobilization step was monitored by a surface plasmon resonance system.     

A universal nucleic acid sequence biosensor with nanomolar detection limits

A quantitative universal biosensor was developed on the basis of olignucleotide sandwich hybridization for the rapid (30 min total assay time) and highly sensitive (1 nM) detection of specific nucleic acid sequences. The biosensor consists of a universal membrane and a universal dye-entrapping liposomal nanovesicle. Two oligonucleotides, a reporter and a capture probe that can hybridize specifically with the target nucleic acid sequence, can be coupled to the universal biosensor components within a 10-min incubation period, thus converting it into a specific assay. The liposomal nanovesicles bear a generic oligonucleotide sequence on their outer surface. The reporter probes consist of two parts: the 3' end is complementary to the generic liposomal oligonucleotide, and the 5' end is complementary to the target sequence. Streptavidin is immobilized in the detection zone of the universal membranes. The capture probes are biotinylated at the 5' end and are complementary to another segment in the target sequence. Thus, by incubating the liposomal nanovesicles with the reporter probes, the target sequence, and the capture probes in a hybridization buffer for 20 min, a sandwich complex is formed. The mixture is applied to the membrane, migrates along the strip, and is captured in the detection zone via streptavidin-biotin binding. The biosensor assay was optimized with respect to hybridization conditions, concentrations of all components, and length of the generic probe. It was tested using synthetic DNA sequences and authentic RNA sequences isolated and amplified using nucleic acid sequence-based amplification (NASBA) from Escherichia coli, Bacillus anthracis, and Cryptosporidium parvum. Dose-response curves were carried out using a portable reflectometer for the instantaneous quantification of liposomal nanovesicles in the detection zone. Limits of detection of 1 fmol per assay (1 nM) and dynamic ranges between 1 fmol and at least 750 fmol (1-750 nM) were obtained. The universal biosensors were compared to specific RNA biosensors developed earlier and were found to match or exceed their performance characteristics. In addition, no changes to hybridization conditions were required when switching to the detection of a new target sequence or when using actual nucleic acid sequence-based amplified RNA sequences. Therefore, the universal biosensor described is an excellent tool for use in laboratories or at test sites for rapidly investigating and quantifying any nucleic acid sequence of interest.     

Silver nanoparticle-based ultrasensitive chemiluminescent detection of DNA hybridization and single-nucleotide polymorphisms

A new nanoparticle-based chemiluminescent (CL) method has been developed for the ultrasensitive detection of DNA hybridization. The assay relies on a sandwich-type DNA hybridization in which the DNA targets are first hybridized to the captured oligonucleotide probes immobilized on polystyrene microwells and then the silver nanoparticles modified with alkylthiol-capped oligonucleotides are used as probes to monitor the presence of the specific target DNA. After being anchored on the hybrids, silver nanoparticles are dissolved to Ag+ in HNO3 solution and sensitively determined by a coupling CL reaction system (Ag+-Mn2+-K2S2O8-H3PO4-luminol). The combination of the remarkable sensitivity of the CL method with the large number of Ag+ released from each hybrid allows the detection of specific sequence DNA targets at levels as low as 5 fM. The sensitivity increases 6 orders of magnitude greater than that of the gold nanoparticle-based colorimetric method and is comparable to that of surface-enhanced Raman spectroscopy, which is one of the most sensitive detection approaches available to the nanoparticle-based detection for DNA hybridization. Moreover, the perfectly complementary DNA targets and the single-base mismatched DNA strands can be evidently differentiated through controlling the temperature, which indicates that the proposed CL assay offers great promise for single-nucleotide polymorphism analysis.     

基于DNA荧光探针的T4多聚核苷酸激酶 免标记荧光检测

开发一种新型的基于DNA荧光探针的T4多聚核苷酸激酶(T4 PNK)活性检测方法。先设计了可以形成发卡结构的DNA探针(PNK-Tb),再通过引入T4 PNK、ATP和λ核酸外切水解酶(λ exo),打开发卡结构,释放发卡结构3’末端富含G的碱基序列,随后与Tb~(3+)结合形成G-四链体产生显著的荧光信号。通过反应前后荧光信号的变化实现T4 PNK的高灵敏检测。实验结果表明:成功制备了新的免标记DNA荧光探针,创新性地将Tb~(3+)应用到T4 PNK活性的检测中;本荧光法定量检测的线性范围为0~100 U/mL,检测下限为2 U/mL;该策略具有良好的特异性并且可用于评估ADP对T4 PNK活性的抑制作用。基于免淬灭标记DNA荧光探针构建的T4 PNK活性检测新策略反应快速 (不超过60 min)、成本低廉、灵敏度高,在药物开发以及生物化学研究中具有广阔的应用前景。     

Monitoring molecular beacon/DNA interactions using atomic force microscopy

The molecular beacon (MB) is a new fluorescence probe containing a single-stranded oligonucleotide with a probe sequence embedded in complementary sequences that form a hairpin stem. Due to the inherent fluorescent signal transduction mechanism, an MB functions as a sensitive probe with a high signal-to-background ratio for real-time monitoring and provides a variety of exciting opportunities in DNA, RNA, and protein studies. To better understand the properties of MBs, the specific interactions between MB and target DNA (complementary and one-base mismatch) have been directly investigated by atomic force microscopy. The interaction force between a linear DNA probe and the target DNA was also detected and compared to that between MB and target DNA. The results demonstrate the high specificity of the MB/target DNA compared to the linear DNA/target DNA interaction.     

Dual-stage DNA sensing: recognition and detection

Selective polynucleotide recognition and detection based on a dual-stage method are described. The method involves the development of a recognition surface based on gold nanoparticles modified with a thiolated capture probe able to hybridize with its complementary sequence (target). After hybridization, this sensing surface is removed from the solution and electrodeposited on an electrode surface. The detection of the hybridization event is achieved using the complex [Ru(NH(3))(5)L](2+), were L is [3-(2-phenanthren-9-yl-vinyl)-pyridine], as electrochemical indicator. This complex binds to double strand DNA more efficiently than to single stranded DNA. The advantage of this dual-stage DNA sensing method is the high selectivity derived from the separation of the hybridization event (occurring on one surface) from the detection step (on a different surface), enabling the analysis of long target DNAs, which is usually the case in real DNA sequence analysis. In addition, this approach not only quantifies pmol of a complementary target sequence but also is sensitive to the presence of a single mismatch and its position in the sequence.     

Detection of human immunodeficiency virus type 1 DNA sequence using plasmonics nanoprobes

This paper describes the use of plasmonics-based nanoprobes that act as molecular sentinels for DNA diagnostics. The plasmonics nanoprobe comprises a metal nanoparticle and a stem-loop DNA molecule tagged with a Raman label. The nanoprobe utilizes the specificity and selectivity of the DNA hairpin probe sequence to detect a specific target DNA sequence of interest. In the absence of target DNA, the stem-loop configuration maintains the Raman label in proximity to the metal nanoparticle, inducing an intense surface-enhanced Raman scattering (SERS) effect that produces a strong Raman signal upon laser excitation. Upon hybridization of a complementary target DNA sequence to the nanoprobe, the stem-loop configuration is disrupted, causing the Raman label to physically separate from the metal nanoparticle, thus quenching the SERS signal. The usefulness and potential application of the plasmonics nanoprobe for diagnosis is demonstrated using the gag gene sequence of the human immunodeficiency virus type 1 (HIV-1). We successfully demonstrated the specificity and selectivity of the plasmonics nanoprobes to detect PCR amplicons of the HIV gene. The potential for combining the spectral selectivity and high sensitivity of the SERS process with inherent molecular specificity of DNA hairpins to diagnose molecular target sequences in homogeneous solutions is discussed.     

Polymeric sequence probe for single DNA detection

A polynucleotide probe, polymeric sequence probe (PSP), was developed for single molecular detections. PSP is a single-stranded DNA molecule with ~2000 tandem repeat target-binding sequences and label-binding sequences. A single PSP can bind to multiple fluorescent complementary oligos to generate a strong fluorescence signal. Single target molecules bound to PSPs can be clearly visualized by a conventional fluorescence microscope. An ultrasensitive PSP-based assay for Mycobacterium tuberculosis was demonstrated.     

Multi-technique comparison of immobilized and hybridized oligonucleotide surface density on commercial amine-reactive microarray slides

To establish a quantitative, corroborative understanding of observed correlations between immobilized probe DNA density on microarray surfaces and target hybridization efficiency in biological samples, we have characterized amine-terminated, single-stranded DNA probes attached to amine-reactive commercial microarray slides and complementary DNA target hybridization using fluorescence imaging, X-ray photoelectron spectroscopy (XPS) and 32P-radiometric assays. Importantly, we have reproduced DNA probe microarray immobilization densities in macroscopic spotted dimensions using high ionic strength, high-concentration DNA probe solutions to permit direct XPS surface analysis of DNA surface chemistry with good reliability and reproducibility. Target capture hybridization efficiency with complementary DNA exhibited an optimum value at intermediate DNA probe immobilization densities. The macroscopic array model provides a new platform for the study of DNA surface chemistry using highly sensitive, quantitative surface analytical techniques (e.g., XPS, ToF-SIMS). Sensitive 32P-DNA radiometric density measurements were calibrated with more routine XPS DNA signals, facilitating future routine DNA density determinations without the use of a hazardous radioactive assay. The objective is to provide new insight into different surface chemistry influences on immobilized DNA probe environments that affect target capture efficiency from solution to improve microarray assay performance.     

Chemical recognition and binding kinetics in a functionalized tunnel junction

4(5)-(2-mercaptoethyl)-1H-imidazole-2-carboxamide is a molecule that has multiple hydrogen bonding sites and a short flexible linker. When tethered to a pair of electrodes, it traps target molecules in a tunnel junction. Surprisingly large recognition-tunneling signals are generated for all naturally occurring DNA bases A, C, G, T and 5-methyl-cytosine. Tunnel current spikes are stochastic and broadly distributed, but characteristic enough so that individual bases can be identified as a tunneling probe is scanned over DNA oligomers. Each base yields a recognizable burst of signal, the duration of which is controlled entirely by the probe speed, down to speeds of 1 nm s -1, implying a maximum off-rate of 3 s -1 for the recognition complex. The same measurements yield a lower bound on the on-rate of 1 M -1 s -1. Despite the stochastic nature of the signals, an optimized multiparameter fit allows base calling from a single signal peak with an accuracy that can exceed 80% when a single type of nucleotide is present in the junction, meaning that recognition-tunneling is capable of true single-molecule analysis. The accuracy increases to 95% when multiple spikes in a signal cluster are analyzed.     

DNA-based hybridization chain reaction for amplified bioelectronic signal and ultrasensitive detection of proteins

This work reports a novel electrochemical immunoassay protocol with signal amplification for determination of proteins (human IgG here used as a model target analyte) at an ultralow concentration using DNA-based hybridization chain reaction (HCR). The immuno-HCR assay consists of magnetic immunosensing probes, nanogold-labeled signal probes conjugated with the DNA initiator strands, and two different hairpin DNA molecules. The signal is amplified by the labeled ferrocene on the hairpin probes. In the presence of target IgG, the sandwiched immunocomplex can be formed between the immobilized antibodies on the magnetic beads and the signal antibodies on the gold nanoparticles. The carried DNA initiator strands open the hairpin DNA structures in sequence and propagate a chain reaction of hybridization events between two alternating hairpins to form a nicked double-helix. Numerous ferrocene molecules are formed on the neighboring probe, each of which produces an electrochemical signal within the applied potentials. Under optimal conditions, the immuno-HCR assay presents good electrochemical responses for determination of target IgG at a concentration as low as 0.1 fg mL(-1). Importantly, the methodology can be further extended to the detection of other proteins or biomarkers.     

Binding-induced fluorescence turn-on assay using aptamer-functionalized silver nanocluster DNA probes

We present here a binding-induced fluorescence turn-on assay for protein detection. Key features of this assay include affinity binding-induced DNA hybridization and fluorescence enhancement of silver nanoclusters (Ag NCs) using guanine-rich DNA sequences. In an example of an assay for human α-thrombin, two aptamers (Apt15 and Apt29) were used and were modified by including additional sequence elements. A 12-nucleotide (nt) sequence was used to link the first aptamer with a nanocluster nucleation sequence at the 5'-end. The second aptamer was linked through a complementary sequence (12-nt) to a G-rich overhang at the 3'-end. Binding of the two aptamer probes to the target protein initiates hybridization between the complementary linker sequences attached to each aptamer and thereby bring the end of the G-rich overhang to close proximity to Ag NCs, resulting in a significant fluorescence enhancement. With this approach, a detection limit of 1 nM and a linear dynamic range of 5 nM-2 μM were achieved for human α-thrombin. This fluorescence assay is performed in a single tube, and it does not require washing or separation steps. The principle of the binding-induced DNA hybridization and fluorescence enhancement of Ag NCs can be extended to other homogeneous assay applications provided that two appropriate probes are available to bind with the same target molecule.     

Protein detection based on small molecule-linked DNA

Based on small molecule-linked DNA and the nicking endonuclease-assisted amplification (NEA) strategy, a novel electrochemical method for protein detection is proposed in this work. Specifically, the small molecule-linked DNA (probe 1) can be protected from exonuclease-catalyzed digestion upon binding to the protein target of the small molecule, so the DNA strand may hybridize with another DNA strand (probe 2) that is previously immobilized onto an electrode surface. Consequently, the NEA process is triggered, resulting in continuous removal of the DNA strands from the electrode surface, and the blocking effect against the electrochemical species [Fe(CN)(6)](3-/4-) becomes increasingly lower; thus, increased electrochemical waves can be achieved. Because the whole process is activated by the target protein, an electrochemical method for protein quantification is developed. Taking folate receptor (FR) as an example in this work, we can determine the protein in a linear range from 0.3 to 15 ng/mL with a detection limit of 0.19 ng/mL. Furthermore, because the method can be used for the assay of FR in serum samples and for the detection of other proteins such as streptavidin by simply changing the small molecule moiety of the DNA probes, this novel method is expected to have great potential applications in the future.     

DNA sensor with a dipyridophenazine complex of osmium(lI) as an electrochemical probe

Application of a dipyrido[3,2-a:2',3'-c]phenazine (DPPZ)-type metal complex as an DNA electrochemical probe was studied. The introduction of electron-donating groups (NH2) was effective for controlling the redox potential and binding affinities of the DPPZ-type osmium complex. The [Os(DA-bpy)2DPPZ]2+ complex (DA-bpy; 4,4'-diamino-2,2'-bipyridine) had a lower half-wave potential (E 1/2) of 147 mV (vs Ag/AgCl) and higher binding affinity with DNA (binding constant, K = 3.1 x 10(7) M(-1)) than those of other complexes. With a single-stranded DNA immobilized gold electrode, the hybridization signal (deltaI) of the [Os(DA-bpy)2DPPZ]2+ complex was linear in the concentration range of 1.0 pg mL(-1) - 0.12 microg mL(-1) for the targeted DNA with a regression coefficient of 0.999. The detection limit was 0. 1 pg mL(-1). The 400-bp yAL3 gene was also detected with good sensitivity and selectivity using the [Os(DA-bpy)2DPPZ]2+ complex.