Selective removal of some heavy metal ions from aqueous solution using treated polyethylene-g-styrene/maleic anhydride membranes

Radiation graft copolymerization of styrene/maleic anhydride (Sty/MAn) comonomer onto low density polyethylene (LDPE) membrane was investigated. The prepared grafted membranes were treated with different reagents containing various functional groups and studied as a matrix for the purpose of water purification from heavy metals. The metal ion uptake by the functional groups of membranes was determined by the use of X-ray fluorescence (XRF) and atomic absorption (AA). The effect of pH of the metal feed solution and immersion period needed for maximum capacity was investigated. The selectivity of different prepared membranes towards some selected metal ions such as Fe, Cu, Pb,… etc. which commonly exist in waste water was determined. The affinity of the treated grafted films to recover Fe(III), Cu(II) or Pb(II) from their aqueous solutions containing other metal ions such as Cd(II), Ni(II) or Hg(II) was studied. Also the selectivity of treated grafted membranes towards Cu(II), Cr(III) and Fe(III) in a mixture was investigated at room temperature and 70°C. It was found that the thiosemicarbazide-, hydroxylamine·HCl- and NaOH-treated grafted films showed high selectivity towards Cu(II), Cr(III) and Fe(III), respectively, at 70°C. However, the selectivity of such treated grafted membranes was remarkable towards Fe(III) at room temperature. The results obtained suggested that the treated grafted membrane possessed good chelating properties towards different metal ions. This suggests that such membranes could be accepted for practical uses.     

Poly(2‐hydroxyethylmethacrylate)/chitosan dye and different metal‐ion‐immobilized interpenetrating network membranes: Preparation and application in metal affinity chromatography

Composite membranes were synthesized with 2‐hydroxyethylmethacrylate and chitosan (pHEMA/chitosan) via an ultraviolet‐initiated photopolymerization technique in the presence of an initiator (α,α′‐azobisisobutyronitrile). The interpenetrating network (IPN) membranes were improved by the immobilization of dye molecules via hydroxyl and amino groups on the membrane surfaces from the IPNs. A triazidine dye (Procion Green H‐4G) was covalently immobilized as a ligand onto the IPN membranes. The protein showed various affinities to different chelated metal ions on the membrane surfaces that best matched its own distribution of functional sites, resulting in a distribution of binding energies. In support of this interpretation, two different metal ions, Zn(II) and Fe(III), were chelated with the immobilized dye molecules. The adsorption and binding characteristics of the different metal‐ion‐chelated dye‐immobilized IPN membranes for the lysozyme were investigated with aqueous solutions in magnetically stirred cells. The experimental data were analyzed with two adsorption kinetic models, pseudo‐first‐order and pseudo‐second‐order, to determine the best fit equation for the adsorption of lysozyme onto IPN membranes. The second‐order equation for the lysozyme–dye–metal‐chelated IPN membrane systems was the most appropriate equation for predicting the adsorption capacity for all the tested adsorbents. The reversible lysozyme adsorption on the dye‐immobilized and metal‐ion‐chelated membranes obeyed the Temkin isotherm. The lysozyme adsorption capacity of the pHEMA/chitosan dye, pHEMA/chitosan dye–Zn(II), and pHEMA/chitosan dye–Fe(III) membranes were 2.54, 2.85, and 3.64 mg cm^?2, respectively. The nonspecific adsorption of the lysozyme on the plain pHEMA/chitosan membrane was about 0.18 mg cm^?2. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1843–1853, 2003     

HDPE chelate membranes prepared by preirradiation grafting for adsorption of heavy metal ions

A new chelate membrane was prepared by grafting of glycidyl methacrylate (GMA) onto high‐density polyethylene membranes and subsequent amination of poly‐GMA graft chains. The effects of grafting conditions such as radiation dose and temperature on grafting yield were studied. Effects of various parameters such as grafting yield, pH, and adsorption time on the metal uptake were investigated. The results show that the maximum metal uptake followed as given in the order Cr (III)>Fe (III)>Cu (II)>Cd (II). The metal uptake increased with grafting yield, adsorption time, pH of the medium, and initial concentration. The chelated metal ions are easily desorbed with 0.1 mol/L hydrochloric acid at room temperature. The results obtained from the chelate membrane showed a promising application in extraction of heavy metal ions from industrial effluents. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A general template for synthesis of hollow microsphere with well‐defined structure

Using chitooligosaccharides (COS) as the backbones and polycaprolactones (PCL) as the branches, a novel type of amphiphilic graft copolymers with a large amount of free ? OH and ? NH₂ groups remained on the COS backbones was synthesized. The obtained Chitooligosaccharide‐graft‐poly(ε‐caprolactone)(COS‐g‐PCL) was self‐assembled into giant vesicles which served as templates for the preparation of hollow spheres of a series of metals(Au, Ag, Cu, Pt, and Pd). The method involved the initial mixing of COS‐g‐PCL and metal‐containing groups or metal ions to generate corresponding complex, followed by adding the selective solvent of water to induce the self‐assembly of the graft copolymers into giant vesicles; Metal ions were reduced and crosslinked by a subsequent calcination procedure to form metal hollow spheres. In addition, hybrid hollow spheres with fluorescent quantum dots and silica hollow spheres were also prepared by slightly modified procedures. A preliminary study on the trinitrotoluene sensor of CdS/vesicle hybrid hollow spheres revealed a considerable sensitivity, which exemplifies the distinct properties imparted by the hybrid hollow structure. All of the results demonstrate that the giant vesicles self‐assembled from COS‐g‐PCL could be utilized as effective templates for the synthesis of various hollow spheres. Using Chitooligosaccharide‐graft‐poly(ε‐caprolactone) vesicles as general templates, the hollow spheres of a series of metals such as Au, Ag, Cu, and Pt were produced. The method involved the initial absorption of metal ions from solution into the functional surface layer of the graft copolymer giant vesicles. Metal ions were reduced and crosslinked by a subsequent calcination procedure to form metal hollow spheres. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Iron(III) complexed with radiation‐grafted acrylic acid onto poly(tetrafluoroethylene‐co‐perfluorovinyl ether) films

To introduce functional moieties to a poly(tetrafluoroethylene‐co‐perfluorovinyl ether) film, graft copolymerization of vinyl monomers such as acrylic acid was attempted by a simultaneous technique in aqueous solution using γ‐irradiation. The graft copolymers were complexed with the Fe(III) in aqueous solution. The grafted copolymer–metal complexes were examined by infrared (IR), ultraviolet/visible, energy‐dispersive X‐ray spectroscopy, and electron spin resonance techniques. The effect of temperature on the trunk copolymer, untreated grafted, and treated grafted copolymer films was investigated by IR and thermogravimetric analysis. The overall results suggest octahedral structure for Fe(III) and revealed the high stability of the obtained ligand–metal complexes. Furthermore, scanning electron microscope investigation of the grafted and modified films, both unheated and heated (200°C), showed changes in the structure and surface morphology. Promising results were achieved enhancing the practical applications of modified grafted membranes in the recovery of metal ions from aqueous systems. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 4065–4071, 2007     

Reversible immobilization of glycoamylase by a variety of Cu2+‐chelated membranes

Glycoamylase (AMG) is an γ‐amylase enzyme which catalyzes the breakdown of large α(1,4)‐linked malto‐oligosaccharides to glucose. It is an extracellular enzyme and is excreted to the culture medium. In this study, AMG was immobilized on a variety of metal affinity membranes, which were prepared by chelating Cu²⁺ ions onto poly(hydroxyethyl methacrylate) (PHEMA) using N‐methacryloyl‐(L )‐histidine methyl ester (MAH), N‐methacryloyl‐(L )‐cysteine methyl ester (MAC), and N‐methacryloyl‐(L )‐phenylalanine methyl ester (MAPA) as metal‐chelating comonomers for reversible immobilization of AMG. The PHEMAH, PHEMAC, PHEMAPA membranes were synthesized by UV‐initiated photo‐polymerization and Cu²⁺ ions were chelated on the membrane surfaces. Cu²⁺‐chelated membranes were characterized by swelling tests, SEM, contact angle measurements, elemental analysis, and FTIR. AMG immobilization on the Cu²⁺‐chelated membranes was performed by using aqueous solutions of different amounts of AMG at different pH values and Cu²⁺ loadings. Durability tests concerning desorption of AMG and reusability of the Cu²⁺‐chelated membranes yielded acceptable results. It was computationally determined that AMG possesses four likely Cu²⁺/Zn²⁺ binding sites, away from the catalytic site, to which the metal‐chelated membranes can be efficiently used. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Resin. III. Synthesis,characterization, and ion-exchange properties of a 2,2′-dihydroxybiphenyl–formaldehyde copolymer resin

A 2,2′-dihydroxybiphenyl–formaldehyde copolymer, synthesized by the condensation of 2,2′-dihydroxybiphenyl with CH₂O in the presence of an acid catalyst, proved to be a selective chelating ion-exchange copolymer for certain metals. The chelating ion-exchange properties of this copolymer were studied for Fe(III), Cu(II), Ni(II), Zn(II), Cd(II), and Pb(II) ions. A batch equilibrium method was employed in the study of the selectivity of metal ion uptake, involving the measurements of the distribution of a given metal ion between the copolymer sample and the solution containing the metal ion. The study was carried out over a wide pH range and in media of various ionic strengths. The copolymer showed a higher selectivity for Fe(III), Cu(II), and Ni(II) ions than for Co(II), Zn(II), Cd(II), and Pb(II) ions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Crossflow filtration of iron(III), copper(II), and cadmium(II) aqueous solutions with alginic acid/cellulose composite membranes

The removal of Fe(III), Cu(II), and Cd(II) ions from aqueous solutions was investigated with a crossflow filtration technique. Alginic acid (AA)/cellulose composite membranes were used for retention. In the filtration of Fe(III) solutions, the effects of the crossflow velocity, applied pressure, AA content of the membranes, and pH on the retention percentage and the permeate flux were examined. The maximum retention percentage was found to be 89% for a 1 × 10^?4M Fe(III) solution at the flow velocity of 100 mL/min and the pressure of 60 kPa with 0.50% (w/v) AA/cellulose composite membranes at pH 3. Aqueous solutions of Cu(II) and Cd(II) were filtered at the flow velocity of 100 mL/min and pressure of 10 kPa. The effects of the AA content of the membranes and pH of the waste medium on the retention percentage and the permeate flux were determined. For 1 × 10^?4M Cu(II) and Cd(II) solutions, the maximum retention percentages were found to be 94 and 75%, respectively, at pH 7 with 0.50% (w/v) AA/cellulose composite membranes. When metal‐ion mixtures were used, the retention percentages of Fe(III), Cu(II), and Cd(II) were found to be 89, 48, and 10%, respectively, at pH 3 with 0.50% (w/v) AA/cellulose composite membranes. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

pH‐ and temperature‐sensitive microfiltration membranes from blends of poly(vinylidene fluoride)‐graft‐poly(4‐vinylpyridine) and poly(N‐isopropylacrylamide)

The copolymer poly(vinylidene fluoride)‐graft‐poly(4‐vinylpyridine) (PVDF‐g‐P4VP) was prepared through the graft copolymerization of poly(vinylidene fluoride) with 4‐vinylpyridine. Through the blending of the PVDF‐g‐P4VP copolymer with poly(N‐isopropylacrylamide) (PNIPAm) in an N‐methyl‐2‐pyrrolidone solution, PVDF‐g‐P4VP/PNIPAm membranes were fabricated by phase inversion in aqueous media. Elemental analyses indicated that the blend concentration of PNIPAm in the blend membranes increased with an increase in the blend ratio used in the casting solution. Scanning electron microscopy revealed that the membrane surface tended to corrugate at a low PNIPAm concentration and transformed into a smooth morphology at a high PNIPAm concentration. The surface morphology and pore size distribution of the microfiltration membranes could be regulated by the blend concentration of the casting solution, temperature, pH, and ionic strength of the coagulation bath. X‐ray photoelectron spectroscopy revealed a significant enrichment of PNIPAm on the membrane surface. The flux of aqueous solutions through the blend membranes exhibited a pH‐ and temperature‐dependent behavior. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4089–4097, 2006     

Quaternary Amine Modified Persimmon Tannin Gel: An Efficient Adsorbent for the Recovery of Precious Metals from Hydrochloric Acid Media

Persimmon tannin was chemically modified to prepare a quaternary amine type of adsorption gel, named as quaternary amine modified persimmon tannin (QAPT) gel. The QAPT gel has been used to investigate the adsorption behaviors for Au(III), Pd(II), and Pt(IV) from HCl media. It was found that the gel exhibited good selectivity towards precious metals over a wide concentration range of HCl. However, it exhibited poor affinity towards base metals such as Cu(II), Fe(III), Ni(II), and Zn(II). The adsorption isotherms of the gel for precious metal ions were described by the Langmuir model. The maximum adsorption capacities for Au(III), Pd(II), and Pt(IV) were evaluated as 4.16, 0.84, and 0.52 mmol g^?1, respectively. Although the anion exchange is the main mechanism for the adsorption of anionic species of Au(III), Pt(IV), and Pd(II), adsorption of Au(III) is followed by subsequent reduction, which results in the extraordinary high adsorption capacity for Au(III). Adsorption behavior of QATP gel for Au(III) was also compared to that of the persimmon tannin, the feed material.     

Antibody purification from human plasma by metal‐chelated affinity membranes

The aim of this study is to investigate in detail the feasibility of poly(2‐hydroxyethyl methacrylate‐N‐methacryloyl‐(L )‐histidine methyl ester), PHEMAH membranes for purification of immunoglobulin G (IgG) from human plasma. PHEMAH membranes were prepared by photo‐polymerization technique. Then, Zn²⁺, Ni²⁺, Co²⁺, and Cu²⁺ ions were chelated directly on the PHEMAH membranes. Elemental analysis assay was performed to determine the nitrogen content and polymerized MAH was calculated as 168.5 μmol/g. The nonspecific IgG adsorption onto the plain PHEMA membranes was negligible (about 0.25 mg/mL). A remarkable increase in the IgG adsorption capacities were achieved from human plasma with PHEMAH membranes (up to 68.4 mg/mL). Further increase was observed with the metal‐chelated PHEMAH membranes (up to 118 mg/mL). The metal‐chelate affinity membranes allowed the one‐step separation of IgG from human plasma. The binding range of metal ions for surface histidines from human plasma followed the order: Cu²⁺ > Ni²⁺ > Zn²⁺ > Co²⁺. Adsorbed IgG was eluted using 250 mM EDTA with a purity of 94.1%. IgG molecules could be repeatedly adsorbed and eluted with the metal‐chelated PHEMAH membranes without noticeable loss in their IgG adsorption capacity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Determination of Iron and Copper in Edible Oils by Flame Atomic Absorption Spectrometry After Liquid–Liquid Extraction

In the present work, a novel and rapid extraction method for Fe(III) and Cu(II) from liquid edible oils is described. N,N′‐Bis(4‐methoxysalicylidene)‐1,2‐diamino ethane (MSE) was utilized for the extraction of metal ions and the determination was achieved by flame atomic absorption spectrometry (FAAS). In order to optimize the extraction conditions, a central composite design (CCD) technique was employed. The optimum conditions, the ratio of MSE solution volume to oil mass, stirring time and temperature, were determined as 1.2 and 1.1 mL g^?1; 24.0 and 31.8 min and 25.3 and 33.2 °C for Fe(III) and Cu(II) extraction, respectively. The feasibility of the improved method was tested with oil‐based metal standards affording 98.6 % recovery for both metals and 67.3 ng g^?1 for Fe(III) and 15.3 ng g^?1 for Cu(II) as limit of detection (LOD).     

Treatment of polluted water resources using reactive polymeric hydrogel

An experimental work was conducted to study the performance of the already prepared polyvinyl pyrrolidone/acrylic acid (PVP/AAc) copolymer hydrogel to chelate heavy metals from bulk solution. Studies of the binding capacity, adsorption isotherm, and adsorption kinetic experiments showed that PVP/AAc copolymer hydrogel has high binding capacities and good adsorption kinetic properties for the metal ions under investigation. The adsorption isotherms of such metal ions on the copolymer exhibit a Langmuir‐type equation. The chelated copolymers were characterized by FTIR and XRD. Technical feasibility for the uses of the prepared PVP/AAc hydrogel for the treatment of polluted samples; collected from different water resources in Helwan area (Egypt) was investigated. The evaluation of the system was performed by a complete analysis of water samples before and after the treatment process. The results showed a promising possibility for producing water of better quality in the area under investigation, using such prepared hydrogel. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3966–3973, 2006     

Evaluation of anionic‐ and cationic‐supported hydrogel membranes for sorption of Th(IV) and U(VI) ions from nitric acid medium

Functionalized membranes were obtained by radiation‐induced graft copolymerization (RIGP) of acrylamide‐acrylic acid (AAm‐AAc) and acrylamide‐4‐vinyl pyridine (AAm‐4VP) binary monomers on both low‐density polyethylene and polypropylene films. The supporting conditions as inhibitor concentration, irradiation dose comonomer compositions and concentrations were studied and optimized. The prepared membranes were characterized using SEM, DTA‐TG, and FTIR. They proved that supporting the selected hydrogels on the base films have modified their structure and enhanced their thermal and mechanical characteristics. The sorption characteristics of Th(IV) and U(VI) on the different membranes were studied. The amount of ions sorbed at equilibrium was found to increase with increase in the degree of graft at certain conditions. The kinetics of sorption was also studied and found to obey the Lagergren and Morris–Weber kinetic models. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 320–332, 2006     

Chitosan‐grafted poly(hydroxyethyl methacrylate‐co‐glycidyl methacrylate) membranes for reversible enzyme immobilization

Epoxy group‐containing poly(hydroxyethyl methacrylate/glycidyl methacrylate), p(HEMA/GMA), membrane was prepared by UV initiated photopolymerization. The membrane was grafted with chitosan (CH) and some of them were chelated with Fe(III) ions. The CH grafted, p(HEMA/GMA), and Fe(III) ions incorporated p(HEMA/GMA)‐CH‐Fe(III) membranes were used for glucose oxidase (GOD) immobilization via adsorption. The maximum enzyme immobilization capacity of the p(HEMA/GMA)‐CH and p(HEMA/GMA)‐CH‐Fe(III) membranes were 0.89 and 1.36 mg/mL, respectively. The optimal pH value for the immobilized GOD preparations is found to have shifted 0.5 units to more acidic pH 5.0. Optimum temperature for both immobilized preparations was 10°C higher than that of the free enzyme and was significantly broader at higher temperatures. The apparent K_m values were found to be 6.9 and 5.8 mM for the adsorbed GOD on p(HEMA/GMA)‐CH and p(HEMA/GMA)‐CH‐Fe(III) membranes, respectively. In addition, all the membranes surfaces were characterized by contact angle measurements. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3084–3093, 2007     

Application of anionic acrylamide‐based hydrogels in the removal of heavy metals from waste water

Crosslinked acrylamide (AM) and 2‐acrylamido‐2‐methylpropanesulfonic acid (AMPS) homopolymers and copolymers were prepared by free radical solution polymerization using N,N′‐methylenebisacrylamide as the crosslinker. The chemical structures of hydrogels were characterized by FTIR analysis and the results were consistent with the expected structures. These hydrogels were used for the separation of Cd(II), Cu(II), and Fe(III) ions from their aqueous solutions. The influence of the uptake conditions such as pH, time and initial feed concentration on the metal ion binding capacity of hydrogel was also tested. The selectivity of the hydrogel towards the different metal ions tested was Cd(II) > Cu(II) > Fe(III). It was observed that the specific interaction between metal ions and ionic comonomers in the hydrogel affected the metal binding capacity of the hydrogel. The recovery of metal ions was also investigated in acid media. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Resin I: Synthesis,characterization, and ion‐exchange properties of terpolymer resins derived from 2,4‐dihydroxypropiophenone,biuret, and formaldehyde

Terpolymers (2,4‐DHPBF) were synthesized by the condensation of 2,4‐dihydro‐xypropiophenone, biuret, and formaldehyde in the presence of acid catalyst with varying the molar ratio of reacting monomers. Terpolymer composition has been determined on the basis of their elemental analysis and their number–average molecular weight of these resin were determined by conductometric titration in nonaqueous medium. The viscosity measurements were carried out in N,N‐dimethyl formamide which indicate normal behavior. IR spectra were studied to elucidate the structure. The terpolymer resin has been further characterized by UV–visible and ¹H‐NMR spectra. The newly synthesized terpolymers proved to be selective chelating ion‐exchange terpolymers for certain metals. The chelating ion‐exchange properties of this terpolymer was studied for Fe (III), Cu (II), Hg (II), Cd (II), Co (II), Zn (II), Ni (II), and Pb (II) ions. A batch equilibrium method was employed in the study of the selectivity of metal ion uptake involving the measurement of the distribution of a given metal ion between the terpolymer sample and a solution containing the metal ion. The study was carried out over a wide pH range and in media of various ionic strengths. The terpolymer showed a higher selectivity for Fe (III), Hg (II), Cd (II), and Pb (II) ions than for Cu (II), Co (II), Zn (II), and Ni (II) ions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Detection of trivalent-iron based on low-dimensional semiconductor metal oxide nanostructures for environmental remediation by ICP-OES technique

A large-scale synthesis of undoped low-dimensional semiconductor metal oxide nanostructures (ZnO nanoparticles, NPs) by simple wet-chemical method was performed using reducing agents at low temperature. The NPs were characterized in terms of their morphological, structural, and optical properties, and efficiently applied for the metal ions uptake. The detailed structural, compositional, and optical characterizations of the NPs were evaluated by powder X-ray diffraction pattern (XRD), Fourier-transform infra-red spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Electron dispersion spectroscopy (EDS), and UV–vis. spectroscopy, respectively which confirmed that the obtained NPs are well-crystalline undoped ZnO and possessed good optical properties. The ZnO NSs morphology was investigated by FESEM, which confirmed that the calcined materials were spherical shape in nano-level and growth in huge-quantity. The analytical efficiency of newly synthesized ZnO NPs was also investigated for a selective separation of trivalent iron [Fe(III)] prior to its determination by inductively coupled plasma-optical emission spectrometry (ICP-OES). The selectivity of ZnO NPs towards different metal ions, including Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Ni(II), Zn(II), and Zr(IV), was studied. Data obtained from the selectivity study suggested that that ZnO NPs phase was the most selective towards Fe(III). The static uptake capacity of Fe(III) was found to be ~79.80 mg g⁻¹. Moreover, adsorption isotherm data also provided that the adsorption process was mainly monolayer on a homogeneous adsorbent surface.     

N-vinylpyrrolidone/acrylic acid/2-acrylamido-2-methylpropane sulfonic acid based hydrogels: Synthesis,characterization and their application in the removal of heavy metals

In this work, the synthesis of N-vinylpyrrolidone/acrylic acid/2-acrylamido-2-methylpropane sulfonic acid (NVP/AAc/AMPS) based hydrogels by UV-curing technique was studied and their swelling behavior, heavy metal ion recovery capabilities were investigated. The structures of hydrogels were characterized by FT-IR analysis and the results were consistent with the expected structures. Thermal gravimetric analysis of hydrogels showed that the thermal stability of hydrogel decreases slightly with incorporation of AMPS units into the structure. In addition, the morphology of the dry hydrogel sample was examined by SEM. According to swelling experiments, hydrogels with higher AMPS content gave relatively higher swelling ratio compared to neat hydrogel. These hydrogels were used for the separation of Cd(II), Cu(II) and Fe(III) ions from their aqueous solutions. The influence of the uptake conditions such as pH, time and initial feed concentration on the metal ion binding capacity of hydrogel was also tested. The selectivity of the hydrogel towards the different metal ions tested was Cd(II) > Cu(II) > Fe(III). It was observed that the specific interaction between metal ions and ionic co-monomers in the hydrogel affected the metal binding capacity of the hydrogel. The recovery of metal ions was also investigated in acid media.     

Preparation and study of cellulose acetate membranes modified with linear polymers covalently bonded to Starburst polyamidoamine dendrimers

Novel ion‐selective membranes were prepared by means of the noncovalent modification of a cellulose acetate (CA) polymer with either poly(ethylene‐alt‐maleic anhydride) or poly(allylamine hydrochloride) chains covalently linked to Starburst amine‐terminated polyamidoamine (PAMAM) dendrimers generations 4 and 3.5, respectively. Linear polymer incorporation within the porous CA membrane was performed with mechanical forces, which resulted in modified substrates susceptible to covalent adsorption of the relevant dendritic materials via the formation of amide bonds with a carbodiimide activation agent. The membranes thus prepared were characterized by chemical, physical, and spectroscopic measurements, and the results indicate that the dendrimer peripheral functional groups were the species that participated in the ion‐exchange events. The prepared materials were also evaluated for their ion‐exchange permeability with sampled current voltammetry experiments involving cationic and anionic species {[Ru(NH₃)₆]³⁺ and [Fe(CN₆)]^3?, respectively} as redox probe molecules under different pH conditions. As expected, although permeability was favored by opposite charges between the dendrimer and the electroactive probe, a clear blocking effect took place when the charge in the dendritic polymer and the electroactive complex was the same. Electrochemical impedance spectroscopy measurements, on the other hand, showed that the PAMAM‐modified membranes were characterized by good selectivity and low resistance values for multivalent ions compared to a couple of commercial ion‐exchange membranes. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008