Silk Fibroin as an Efficient Biomaterial for Drug Delivery,Gene Therapy,and Wound Healing

Silk fibroin (SF), an organic material obtained from the cocoons of a silkworm Bombyx mori, is used in several applications and has a proven track record in biomedicine owing to its superior compatibility with the human body, superb mechanical characteristics, and its controllable propensity to decay. Due to its robust biocompatibility, less immunogenic, non-toxic, non-carcinogenic, and biodegradable properties, it has been widely used in biological and biomedical fields, including wound healing. The key strategies for building diverse SF-based drug delivery systems are discussed in this review, as well as the most recent ways for developing functionalized SF for controlled or redirected medicines, gene therapy, and wound healing. Understanding the features of SF and the various ways to manipulate its physicochemical and mechanical properties enables the development of more effective drug delivery devices. Drugs are encapsulated in SF-based drug delivery systems to extend their shelf life and control their release, allowing them to travel further across the bloodstream and thus extend their range of operation. Furthermore, due to their tunable properties, SF-based drug delivery systems open up new possibilities for drug delivery, gene therapy, and wound healing.     

Silkworm Gut Fibres from Silk Glands of Samia cynthia ricini—Potential Use as a Scaffold in Tissue Engineering

High-performance fibroin fibres are ideal candidates for the manufacture of scaffolds with applications in tissue engineering due to the excellent mechanical properties and optimal biocompatibility of this protein. In this work, the manufacture of high-strength fibres made from the silk glands of Samia cynthia ricini is explored. The glands were subjected to soaking in aqueous dissolutions of acetic acid and stretched to manufacture the fibres. The materials produced were widely characterized, in terms of morphology, mechanical properties, crystallinity and content of secondary structures, comparing them with those produced by the standard procedure published for Bombyx mori. In addition, mechanical properties and biocompatibility of a braided scaffold produced from these fibres was evaluated. The results obtained show that the fibres from B. mori present a higher degree of crystallinity than those from S. c. ricini, which is reflected in higher values of elastic modulus and lower values of strain at break. Moreover, a decrease in the elongation values of the fibres from S. c. ricini was observed as the concentration of acetic acid was increased during the manufacture. On the other hand, the study of the braided scaffolds showed higher values of tensile strength and strain at break in the case of S. c. ricini materials and similar values of elastic modulus, compared to those of B. mori, displaying both scaffolds optimal biocompatibility using a fibroblast cell line.     

蚕丝素蛋白及其应用

阐述了丝素蛋白的组成、结构、性质和制备方法 ,及其综合利用现状。丝素作为一种天然蛋白质在医学和食品等行业中的应用开发研究具有深远的意义。     

Comparative Study of Ultrasonication-Induced and Naturally Self-Assembled Silk Fibroin-Wool Keratin Hydrogel Biomaterials

This study reports the formation of biocompatible hydrogels using protein polymers from natural silk cocoon fibroins and sheep wool keratins. Silk fibroin protein contains β-sheet secondary structures, allowing for the formation of physical cross-linkers in the hydrogels. Comparative studies were performed on two groups of samples. In the first group, ultrasonication was used to induce a quick gelation of a protein aqueous solution, enhancing the ability of Bombyx mori silk fibroin chains to quickly entrap the wool keratin protein molecules homogenously. In the second group, silk/keratin mixtures were left at room temperature for days, resulting in naturally-assembled gelled solutions. It was found that silk/wool blended solutions can form hydrogels at different mixing ratios, with perfectly interconnected gel structure when the wool content was less than 30 weight percent (wt %) for the first group (ultrasonication), and 10 wt % for the second group (natural gel). Differential scanning calorimetry (DSC) and temperature modulated DSC (TMDSC) were used to confirm that the fibroin/keratin hydrogel system was well-blended without phase separation. Fourier transform infrared spectroscopy (FTIR) was used to investigate the secondary structures of blended protein gels. It was found that intermolecular β-sheet contents significantly increase as the system contains more silk for both groups of samples, resulting in stable crystalline cross-linkers in the blended hydrogel structures. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to analyze the samples’ characteristic morphology on both micro- and nanoscales, which showed that ultrasonic waves can significantly enhance the cross-linker formation and avoid phase separation between silk and keratin molecules in the blended systems. With the ability to form cross-linkages non-chemically, these silk/wool hydrogels may be economically useful for various biomedical applications, thanks to the good biocompatibility of protein molecules and the various characteristics of hydrogel systems.     

Preparation of Silk Fibroin/Carboxymethyl Chitosan Hydrogel under Low Voltage as a Wound Dressing

At present, silk fibroin (SF) hydrogel can be prepared by means of electrodeposition at 25 V in direct current (DC) mode. Reducing the applied voltage would provide benefits, including lower fabrication costs, less risk of high voltage shocks, and better stability of devices. Here, a simple but uncommon strategy for SF-based hydrogel preparation using 4 V in DC mode is discussed. SF was mixed and cross-linked with carboxymethyl chitosan (CMCS) through hydrogen bonding, then co-deposited on the graphite electrode. The thickness, mass, and shape of the SF/CMCS hydrogel were easily controlled by adjusting the electrodeposition parameters. Morphological characterization of the prepared hydrogel via SEM revealed a porous network within the fabricated hydrogel. This structure was due to intermolecular hydrogen bonding between SF and CMCS, according to the results of thermogravimetric analysis and rheological measurements. As a potential wound dressing, SF/CMCS hydrogel maintained a suitable moisture environment for wound healing and demonstrated distinct properties in terms of promoting the proliferation of HEK-293 cells and antibacterial activity against Escherichia coli and Staphylococcus aureus. Furthermore, histological studies were conducted on a full-thickness skin wound in rats covered with the SF/CMCS hydrogel, with results indicating that this hydrogel can promote wound re-epithelization and enhance granulation tissue formation. These results illustrate the feasibility of using the developed strategy for SF-based hydrogel fabrication in practice for wound dressing.     

丝素共混膜在化妆品保湿效果评价中的应用初探

利用皮肤水分含量测试仪和水分散失测定仪,对添加不同质量分数甘油的保湿化妆品作用前后丝素共混膜的水分含量值（MMV）和经表皮水分散失值（TEWL）进行测定,以人体试验为参比,创造性地探索丝素共混膜在化妆品保湿效果评价中的应用价值,并对保湿类化妆品中保湿剂的最佳添加量做出指导。结果发现,丝素共混膜模拟体系的试验结果和人体试验具有相似的趋势,以其作为化妆品保湿效果评价的人体替代试验具有一定的可能性。     

Sustained Release of Insulin-Like Growth Factor-1 from Bombyx mori L. Silk Fibroin Delivery for Diabetic Wound Therapy

The goals of this study are to develop a high purity patented silk fibroin (SF) film and test its suitability to be used as a slow-release delivery for insulin-like growth factor-1 (IGF-1). The release rate of the SF film delivering IGF-1 followed zero-order kinetics as determined via the Ritger and Peppas equation. The release rate constant was identified as 0.11, 0.23, and 0.09% h⁻¹ at 37 °C for SF films loaded with 0.65, 6.5, and 65 pmol IGF-1, respectively. More importantly, the IGF-1 activity was preserved for more than 30 days when complexed with the SF film. We show that the IGF-1-loaded SF films significantly accelerated wound healing in vitro (BALB/3T3) and in vivo (diabetic mice), compared with wounds treated with free IGF-1 and an IGF-1-loaded hydrocolloid dressing. This was evidenced by a six-fold increase in the granulation tissue area in the IGF-1-loaded SF film treatment group compared to that of the PBS control group. Western blotting analysis also demonstrated that IGF-1 receptor (IGF1R) phosphorylation in diabetic wounds increased more significantly in the IGF-1-loaded SF films group than in other experimental groups. Our results suggest that IGF-1 sustained release from SF films promotes wound healing through continuously activating the IGF1R pathway, leading to the enhancement of both wound re-epithelialization and granulation tissue formation in diabetic mice. Collectively, these data indicate that SF films have considerable potential to be used as a wound dressing material for long-term IGF-1 delivery for diabetic wound therapy.     

Self‐Expansion Behavior of Silk Fibroin Film

Summary: Silk fibroin cast film was prepared using a ternary solvent system of CaCl₂/CH₃CH₂OH/H₂O (1/2/8 in mole ratio). A drying temperature at casting influenced crystal structure of fibroin. When a drying temperature was set lower than 9 °C, the cast film became amorphous. When a drying temperature was set higher than 40 °C, a fibroin film of silk‐II structure was obtained. In order to produce a fibroin film of silk‐I structure, a preferable temperature range was from 20 to 26 °C. The crystal transformation from random coil structure into silk‐I could be made through exposure of an amorphous film to water vapor. As for the crystal transformation from silk‐I into silk‐II, the treatment with a glycerin solution was effective. In the course of the treatment a film showed self‐thinning and self‐expanding. The expansion ratio exceeded 40% at maximum. The film produced accompanying self‐expansion was ductile in nature.

The apparent self‐expansion percentage as a function of initial thickness of the film. The ductility of the film was classified into four stages from the observation of recovery behavior after folding: ?, very soft; ?, soft; ?, middle; ?, hard (see Figure 5 ).     

Cetyl Trimethyl Ammonium Bromide Modified Montmorillonite-Doped Tasar Silk Fibroin/Polyvinyl Alcohol Blend 3D Nanowebs for Tissue Engineering Applications

Cetyl trimethyl ammonium bromide (CTAB) modified montmorillonite (MMT) clay (CTAB-MT) doped, tasar silk fibroin-polyvinyl alcohol blend-based 3D nanowebs are generated through electrospinning technique. The morphological analysis reveals the formation of interlinked 3D nanoweb-like architecture and high surface roughness through scanning electron microscopy (SEM) and atomic force microscopy, respectively. The existence of CTAB-MT in nanowebs is confirmed by Fourier transform infrared and complete exfoliation of clay in the polymer blend matrix along with the altered crystallinity of samples is indicated in X-ray diffraction. The incorporation of CTAB-MT clay has shown the enhancement of thermal and mechanical properties of nanoweb samples while the water uptake capacity is reduced and enzymatic biodegradability is found to slow down. The samples present excellent biocompatibility with no cytotoxicity in the Alamar blue assay and high attachment as well as spreading of L929 fibroblast cells covering the entire surface as observed in SEM. The CTAB-MT clay has imparted the samples with good antimicrobial activity against E. coli and S. aureus bacterial strains. The aforementioned properties of these CTAB-MT clay doped 3D nanowebs direct toward their suitability as a potential candidate for tissue engineering applications in the biomedical field.     

Wound Healing Impairment in Type 2 Diabetes Model of Leptin-Deficient Mice—A Mechanistic Systematic Review

Type II diabetes mellitus (T2DM) is one of the most prevalent diseases in the world, associated with diabetic foot ulcers and impaired wound healing. There is an ongoing need for interventions effective in treating these two problems. Pre-clinical studies in this field rely on adequate animal models. However, producing such a model is near-impossible given the complex and multifactorial pathogenesis of T2DM. A leptin-deficient murine model was developed in 1959 and relies on either dysfunctional leptin (ob/ob) or a leptin receptor (db/db). Though monogenic, this model has been used in hundreds of studies, including diabetic wound healing research. In this study, we systematically summarize data from over one hundred studies, which described the mechanisms underlying wound healing impairment in this model. We briefly review the wound healing dynamics, growth factors’ dysregulation, angiogenesis, inflammation, the function of leptin and insulin, the role of advanced glycation end-products, extracellular matrix abnormalities, stem cells’ dysregulation, and the role of non-coding RNAs. Some studies investigated novel chronic diabetes wound models, based on a leptin-deficient murine model, which was also described. We also discussed the interventions studied in vivo, which passed into human clinical trials. It is our hope that this review will help plan future research.     

Chemical,Thermal, Time,and Enzymatic Stability of Silk Materials with Silk I Structure

The crystalline structure of silk fibroin Silk I is generally considered to be a metastable structure; however, there is no definite conclusion under what circumstances this crystalline structure is stable or the crystal form will change. In this study, silk fibroin solution was prepared from B. Mori silkworm cocoons, and a combined method of freeze-crystallization and freeze-drying at different temperatures was used to obtain stable Silk I crystalline material and uncrystallized silk material, respectively. Different concentrations of methanol and ethanol were used to soak the two materials with different time periods to investigate the effect of immersion treatments on the crystalline structure of silk fibroin materials. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman scattering spectroscopy (Raman), Scanning electron microscope (SEM), and Thermogravimetric analysis (TGA) were used to characterize the structure of silk fibroin before and after the treatments. The results showed that, after immersion treatments, uncrystallized silk fibroin material with random coil structure was transformed into Silk II crystal structure, while the silk material with dominated Silk I crystal structure showed good long-term stability without obvious transition to Silk II crystal structure. α-chymotrypsin biodegradation study showed that the crystalline structure of silk fibroin Silk I materials is enzymatically degradable with a much lower rate compared to uncrystallized silk materials. The crystalline structure of Silk I materials demonstrate a good long-term stability, endurance to alcohol sterilization without structural changes, and can be applied to many emerging fields, such as biomedical materials, sustainable materials, and biosensors.     

丝素/羧甲基壳聚糖共混膜的结构与性能

利用丝素(SF)与羧甲基壳聚糖(CMCS)共混制取不同比例的SF/CMCS共混膜。研究了CMCS诱导的丝素构象转变行为,测试了共混膜的吸湿性、透湿性和保水性。当CMCS的质量分数为5%时,共混膜中丝素的构象以β-折叠为主;当CMCS的质量分数为10%时,共混膜中丝素的构象由β-折叠向α-螺旋发生转变;当CMCS的质量分数达到15%时,共混膜中丝素的构象向无规卷曲发生转变。当CMCS质量分数小于15%时,共混膜中SF与CMCS具有良好的相容性,溶胀度较小,吸湿性随CMCS含量的增加而迅速降低。     

Cytokines and Venous Leg Ulcer Healing—A Systematic Review

Venous leg ulcers (VLUs) are the most common type of leg ulcers with a significant socioeconomic burden due to slow healing. Cytokines may be involved in the pathogenesis of VLUs. In this systematic review, our objective was to investigate the association between cytokine levels, including growth factors, with the healing of VLUs. PubMed, Embase, Web of Science and Cochrane Library were searched from their inception to August 2021. We retrieved 28 articles investigating 38 different cytokines in 790 patients. Cytokines were most commonly investigated in wound fluid and less frequently in biopsies and serum. The studies were judged as having a moderate to high risk of bias, and the results were often inconsistent and sometimes conflicting. A meta-analysis was not performed due to clinical and methodological heterogeneities. We found weak evidence for elevated IL-1α, IL-6, IL-8, TNF-α and VEGF levels in non-healing VLUs, an elevation that declined with healing. TGF-β1 levels tended to increase with VLU healing. Other cytokines warranting further investigations include EGF, FGF-2, GM-CSF, IL-1β, IL-1Ra and PDGF-AA/PDGF-BB. We conclude that non-healing VLUs may be associated with an elevation of a palette of pro-inflammatory cytokines, possibly reflecting activated innate immunity in these wounds. There is a paucity of reliable longitudinal studies monitoring the dynamic changes in cytokine levels during wound healing.     

Galectin 1—A Key Player between Tissue Repair and Fibrosis

Galectins are ten family members of carbohydrate-binding proteins with a high affinity for β galactose-containing oligosaccharides. Galectin-1 (Gal-1) is the first protein discovered in the family, expressed in many sites under normal and pathological conditions. In the first part of the review article, we described recent advances in the Gal-1 modulatory role on wound healing, by focusing on the different phases triggered by Gal-1, such as inflammation, proliferation, tissue repair and re-epithelialization. On the contrary, Gal-1 persistent over-expression enhances angiogenesis and extracellular matrix (ECM) production via PI3K/Akt pathway activation and leads to keloid tissue. Therefore, the targeted Gal-1 modulation should be considered a method of choice to treat wound healing and avoid keloid formation. In the second part of the review article, we discuss studies clarifying the role of Gal-1 in the pathogenesis of proliferative diabetic retinopathy, liver, renal, pancreatic and pulmonary fibrosis. This evidence suggests that Gal-1 may become a biomarker for the diagnosis and prognosis of tissue fibrosis and a promising molecular target for the development of new and original therapeutic tools to treat fibrosis in different chronic diseases.     

蚕丝蛋白开发利用的研究进展

较为全面地综述了最近几十年国内外关于蚕丝蛋白的组成、性能,介绍了蚕丝新用途和利用原理,蚕丝脱胶精炼方法,以及蚕丝在化妆品、医药、固定化酶载体材料、食品、再生丝和涂膜化纤表面等方面的应用和研究进展。     

静电纺再生丝素纳米纤维的结构与性能

静电纺丝获得的丝素纳米级纤维可作为细胞培养支架,用于纺丝工艺及后处理能改变丝素微细结构,影响其水溶性和力学性能。本文采用XRD、FTIR、固态13CNMR和DSC研究了不同工艺下丝素纳米纤维及经甲醇处理后的微细结构,比较了不同微细结构下的水溶性和力学性能。结果表明,电纺丝的微细结构受纺丝工艺影响,高电压、纺丝液中丝素质量分数大时纺得的电纺丝结晶度高,经甲醇处理后,β化程度提高;w(丝素)=11%、15%时制备的电纺丝断裂强度分别为8.5、11.9 cN/mm;w(丝素)=11%、19%,水溶性由51.2%下降到43.3%;w(丝素)=19%、电压32 kV制得的电纺丝甲醇处理前后水溶性从43.3%下降到6.6%,说明丝素纳米纤维结晶度提高,强度增加、水溶性下降,满足了细胞支架的要求。     

光学胶粘剂在透镜应用中的发展

介绍了光学胶的应用和发展情况,以及对光学胶的技术要求。     

Lactosamine‐Based Derivatives as Tools to Delineate the Biological Functions of Galectins: Application to Skin Tissue Repair

Galectins have been recognized as potential novel therapeutic targets for the numerous fundamental biological processes in which they are involved. Galectins are key players in homeostasis, and as such their expression and function are finely tuned in vivo. Thus, their modes of action are complex and remain largely unexplored, partly because of the lack of dedicated tools. We thus designed galectin inhibitors from a lactosamine core, functionalized at key C2 and C3′ positions by aromatic substituents to ensure both high affinity and selectivity, and equipped with a spacer that can be modified on demand to further modulate their physico‐chemical properties. As a proof‐of‐concept, galectin‐3 was selectively targeted. The efficacy of the synthesized di‐aromatic lactosamine tools was shown in cellular assays to modulate collective epithelial cell migration and to interfere with actin/cortactin localization.     

水性胶黏剂的应用及研究进展

综述了水性胶黏剂的发展前景、应用情况及技术和研究的进展。世界各国都很重视环保型胶黏剂的发展,在一些发达国家,水性胶黏剂的发展一直呈上升趋势,差不多占到胶黏剂总用量的50％。一些高性能的水性胶黏剂-如丙烯酸酯类、聚氨酯类、环氧类等,在很多场合已经能够完全代替溶剂型胶黏剂。在建筑、包装、运输、胶带等领域,水性胶黏剂得到了广泛的应用。随着对环保问题的日益重视,胶黏剂从溶剂型向水基型（或热熔型）的转变已成为必然。