Manufacturing technology in Korea

This article describes a general overview of industry development, present status and future perspectives of manufacturing technology in Korea. The Advanced Manufacturing System project, which is one of the national R&D projects in manufacturing technology, is introduced. The problems for the future development of manufacturing technology in Korea is discussed.     

Progress on standardizing OSI conformance testing

International standards for Open Systems Interconnection (OSI) services and protocols are well advanced. Complementary standardization work has begun for testing conformance of products to OSI protocol standards. This is drawing on about 7 years R&D work on techniques and tools for testing protocol implementations. This paper presents the major aspects of the testing methodology and framework being standardized by ISO and CCITT. It relates some of the ideas to the work done in the R&D community and identifies the main topics on which further work is needed.     

R&D project evaluation model based on fuzzy set priority

Most of the conventional concepts used by the R&D project evaluation models do not seem to be appropriate for modeling the imprecision R&D project evaluation. This paper is concerned with the project evaluation by aggregating the multiple rank-ordered sets based on fuzzy set priority. First the rank-ordered priority lists of the R&D projects were determined based on the majority-rule methods, then the aggregate fuzzy set rank order was computed and compared with the others. Finally, we have developed a systemic and practical program suitable for a simple and easy calculation of all the algorithms. It was found that our model was validated by the comparative computations in various R&D project examples.     

An intelligent adaptive system for the optimal variable selections of R&D and quality supply chains

The cost of research & development (R&D) and quality management are always regarded as two major parts of total cost. The variable performance of R&D and quality design is an important index that will reflect the effectiveness of the cost reduction. This research has attempted to simultaneously vary all of the variables to achieve the global optimum for the optimal variable selections of R&D and quality design. Genetic algorithm (GA) can treat all of the variables for the global search. In this study, fuzzy refinement with orthogonal arrays was effective in improving the performance of the GA, and also showed the benefits of a good chromosome structure on the behavior of GA. It is also proposed the postponement design with temporal concept, to select the effective variables for the cost reduction of R&D and quality management design. The experimental results showed that tempo-postponement design will increase the flexibility and quick response for supply chain management. Hence, this approach can act as a useful guideline for researchers working on the optimization of the key variable selections for R&D and quality model design.     

Finding research trend of convergence technology based on Korean R&D network

Traditionally, collaboration network or citation network is used to answer the old question how scientists or engineers interact with each other. This paper introduces a R&D network to make up the missing aspect of the traditional approaches about using multi-sources and to find out the trend of convergence technology R&D in Korea. We collect data about human resources and national R&D projects from Korean national R&D databases, and then construct a weighted network between experts by using meta-data mapping and the network folding technique. And we apply Newman’s grouping algorithm that is generalized to a weighted network for detecting the community structure of the network. Gathering data from multi-sources is useful to reveal the structure of network rather than to use only one database. Lastly, we perform a network analysis to examine important experts. The result shows significant information about research trend and core experts in Korea. We expect this study will be helpful in three ways: (1) how to make a network from heterogeneous multi-sources, (2) how to figure out the current situation of convergence technology R&D, (3) how to discover who are important people in Korean convergence technology R&D network. And this paper is just a cornerstone of the work to investigate the current situation of national R&D projects in Korea.     

A computer-based model for system level reliability and maintainability allocation

This paper describes computer-based heuristic models for Reliability and Maintainability (R&M) allocation for large systems. The model is an embellishment to the Maintenance Allocation Program (MAP) developed at McDonnell Douglas Corporation. The new version of MAP known as REMAP (Reliability Embellished MAP) is a decision support tool for contractors who are involved in large scale design projects such as aircraft design. The REMAP allows the user to give preliminary R&M information about the system. The REMAP gives “what if” changes on the requirements required to meet the desired design reliability specification.     

Targets and results from phase one and two of the fifth generation computer systems study

This article presents an introduction to the fifth generation computer systems.

Fifth generation computers are under development to meet the knowledge information processing needs for the advanced information-oriented society of the 1990s. This clearly requires overcoming the technical limitations of conventional computers. A fifth generation computer requires problem solving and inference functions for inference of solutions to problems from accumulated knowledge, knowledge base management functions for acquirement and retrieval of knowledge, intelligent interface functions for fluent conversations using natural language, drawings, images, etc., and intelligent programming functions for automatic conversion of problem specifications submitted in natural language, drawing etc., into efficient programs.

Fifth generation computers with these functions will have far-reaching impact finding applications in all areas of industry and society. However, research and development (R&D) of these computers requires an extremely wide variety of leading-edge technology, and the risks are high. Accordingly, a long-term R&D plan was established for this project that extends over ten years with the initial stage lasting from 1982 to 1984, the intermediate stage from 1985 to 1988, and the final stage will begin in 1989 and the project will end in 1991.     

A decision support system for inventory management in high research & development environment

Inventory management is being discussed recently as one of the key elements for survival and success in the production industry today. Little efforts were made to solve inventory problems in the Hi R&D environment.

In this paper, a prototype of a Microcomputer Based Decision Support is introduced to support decisions for managing Hi R&D inventories. The decisions involve timing and scheduling of purchased components, as well as classification of those items.     

3D standard avatar creation of Korean women in their twenties and thirties by body types for apparel industry

The purposes of this study are to classify body types of Korean women in their twenties and thirties for the creation of the 3D avatars and to propose the representative body size of each body type by analyzing the body size of Korean women in their twenties and thirties, to propose a 3D avatar modeling process design that reflects the body shapes of Korean women in their twenties and thirties, and to present standard 3D avatars of each body type of Korean women in their twenties and thirties which are verified with measurement suitability. The 3D anthropometric data of the Korean Anthropometric Survey (6th Size Korea) conducted in 2010 was used in this study. The collected subjects were 410 Korean women in their twenties and thirties. The 3D avatar modeling process using Maya 2013 was proposed to create the representative 3D avatars show superior measurement suitability. This process includes four steps; Analyzing body size measurements, 2D Image plane design, 3D avatar modeling, and 3D avatar evaluation. The 3D avatars created with this process showed the acceptable range of error. The factor analysis was performed on fifty-five body measurements chosen from the measurements of the 6th Size Korea anthropometric survey. Seven factors were extracted. With the seven extracted factors, body shapes of 406 Korean women in their twenties and thirties are classified into four groups by cluster analysis. The classified groups were named Full & Short, Slim & Short, Full & Tall, and Slim & Tall.     

A heuristic program for reliability and maintainability allocation in complex hierachical systems

A new and computationally efficient heuristic algorithm is developed for reliability and maintainability (R&M) allocation in complex hierarchical systems (CHS). This approach has advantage over other available methods in that mean-time-to repair (MTTR) and other R&M parameters are estimated at the component level before desing. The R&M allocation is achieved by decomposing the system R&M state space into a hierarchy of subsystems and reformulating the problem as a reliability network equivalent.     

Computer use in Korean schools: Instruction and administration

Computer use in education is now commonly practiced and becoming increasingly important in educational endeavors. The success of school computer education depends on how schools implement computers. However, little up-to-date information is available on the use of computers in Korean schools. The purpose of this research was to investigate the present status of computer use for instruction and administration in Korean schools. To serve this purpose, a survey was conducted in December 1994. Overall, Korean schools have a relatively large amount of hardware and software due to strong governmental support. However, while the quantity of hardware and software abounds, problems exist in hardware function, software distribution, teacher training, and school policy on computer education. Data collected in these initial stages of educational computer use in Korea will be useful to guide the Ministry of Education's policy towards computer education.     

An estimation model for completion times considering the time interval between interdependent R&D events

Cross Impact Analysis(CIA) as a means of technological forecasting has a critical weakness in that it does not reflect the time impact on forecast events.

The objective of this research is to modify the current Cross Impact Analysis and to develop a new model which estimates the impact of time on the completion of R&D events when the interdependency between the events are considered.     

The role of R&D and corporate governance in Korea: IT firms versus non-IT firms

Recent economic development in Korea was mostly driven by companies in the IT sector. Also, it is widely argued that R&D investment has a positive impact on firm value, especially for IT firms. In this paper, we analyze how R&D investment has contributed to the growth of Korea’s economy by examining the effect of R&D investment on firms’ market value, measured as Tobin’s Q, and investigate whether this effect is different between firms in the IT sector and firms in the non-IT sector. We also account for the effect of another major change experienced by Korean firms: changes in corporate governance structure. We find that for firms in the IT industry, higher R&D investment coupled with high foreign ownership results in higher firm valuation.     

Common data communications protocols in the FRG

To provide data communications between computer centres with hardware from different suppliers and access to these centres from various terminals, common data communications protocols have been proposed by a working group of the public administration of the Federal Republic of Germany. Protocols corresponding to layers 4, 5 and 6 of the OSI reference model have been passed by the Coordination Committee for Data Processing (KoopA ADV). The paper reports on the use of the protocols in the projects Datenvermittlungssystem Nordrhein-Westfalen and Interactive Videotex, as well as on how to implement open systems communications protocols into the teleprocessing software systems of EDP suppliers.     

Two fusion predictors for discrete-time linear systems with different types of observations

New fusion predictors for linear dynamic systems with different types of observations are proposed. The fusion predictors are formed by summation of the local Kalman filters/predictors with matrix weights depending only on time instants. The relationship between fusion predictors is established. Then, the accuracy and computational efficiency of the fusion predictors are demonstrated on the first-order Markov process and the GMTI model with multisensor environment. Recommended by Editorial Board member Lucy Y. Pao under the direction of Editor Young Il Lee. This work was partially supported by the Korea Science and Engineering Foundation (KOSEF) grant funded by the Korean government (MOST), No. R01-2007-000-20227-0 and the Center for Distributed Sensor Network at GIST. Ha-Ryong Song received the B.S. degree in Control and Instrumentation Engineering from the Chosun University, Korea, in 2006, the M.S. degree in School of Information and Mechatronics from the Gwangju Institute of Science and Technology, Korea, in 2007. He is currently a Ph.D. candidate in Gwangju Institute of Science and Technology. His research interests include estimation, target tracking systems, data fusion, nonlinear filtering. Moon-Gu Jeon received the B.S. degree in architectural engineering from the Korea University, Korea in 1988. He then received both the M.S. and Ph.D. degrees in computer science and scientific computation from the University of Minnesota in 1999 and 2001, respectively. Currently, he is an Associate Professor at the School of Information and Mechatronics of the Gwangju Institute of Science and Technology (GIST). His current research interests are in machine learning and pattern recognition and evolutionary computation. Tae-Sun Choi received the B.S. degree in Electrical Engineering from the Seoul National University, Seoul, Korea, in 1976, the M.S. degree in Electrical Engineering from the Korea Advanced Institute of Science and Technology, Seoul, Korea, in 1979, and the Ph.D. degree in Electrical Engineering from the State University of New York at Stony Brook, in 1993. He is currently a Professor in the School of Information and Mechatronics at Gwangju Institute of Science and Technology, Korea. His research interests include image processing, machine/robot vision, and visual communications. Vladimir Shin received the B.Sc. and M.Sc. degrees in Applied Mathematics from Moscow State Aviation Institute, in 1977 and 1979, respectively. In 1985 he received the Ph.D. degree in Mathematics at the Institute of Control Science, Russian Academy of Sciences, Moscow. He is currently an Associate Professor at Gwangju Institute of Science and Technology, South Korea. His research interests include estimation, filtering, tracking, data fusion, stochastic control, identification, and other multidimensional data processing methods.     

Students' beliefs about mobile devices Vs. desktop computers in South Korea and the United States

College students in the United States and in South Korea completed a 28-item multidimensional scaling (MDS) questionnaire in which they rated the similarity of 28 pairs of multimedia learning materials on a 10-point scale (e.g., narrated animation on a mobile device Vs. movie clip on a desktop computer) and a 56-item semantic differential questionnaire in which they rated their perceptions of mobile devices and desktop computers using 28 adjective pairs (e.g., active–passive) as anchors on a 7-point scale. On the MDS questionnaire students in both the USA and South Korea conceptualized multimedia learning materials in terms of a static–dynamic dimension, but they differed in terms of the second dimension in which USA students were more sensitive to whether an instructional lesson is presented on a mobile device or a desktop computer whereas South Korean students conceptualized both media as equivalent. On the semantic differential questionnaire, students in both nations viewed mobile devices as more accessible, more portable, and newer, and viewed desktop computers as more faithful, stable, concentrative, and essential. However, USA students also rated desktop computers higher than mobile devices on positive features such as being fast, sharp, meaningful, good, and realistic; whereas South Korean also rated mobile devices higher than desktop computers on positive features such as being open, attractive, changeful, stimulating, immediate, and exciting. Overall, there are cross-national differences in students' beliefs about mobile and desktop media, which may affect their learning.     

Adaptive group scheduling mechanism using mobile agents in peer-to-peer grid computing environment

Peer-to-peer grid computing is an attractive computing paradigm for high throughput applications. However, both volatility due to the autonomy of volunteers (i.e., resource providers) and the heterogeneous properties of volunteers are challenging problems in the scheduling procedure. Therefore, it is necessary to develop a scheduling mechanism that adapts to a dynamic peer-to-peer grid computing environment. In this paper, we propose a Mobile Agent based Adaptive Group Scheduling Mechanism (MAAGSM). The MAAGSM classifies and constructs volunteer groups to perform a scheduling mechanism according to the properties of volunteers such as volunteer autonomy failures, volunteer availability, and volunteering service time. In addition, the MAAGSM exploits a mobile agent technology to adaptively conduct various scheduling, fault tolerance, and replication algorithms suitable for each volunteer group. Furthermore, we demonstrate that the MAAGSM improves performance by evaluating the scheduling mechanism in Korea@Home. SungJin Choi is a Ph.D. student in the Department of Computer Science and Engineering at Korea University. His research interests include mobile agent, peer-to-peer computing, grid computing, and distributed systems. Mr. Choi received a M.S. in computer science from Korea University. He is a student member of the IEEE. MaengSoon Baik is a senior research member at the SAMSUNG SDS Research & Develop Center. His research interests include mobile agent, grid computing, server virtualization, storage virtualization, and utility computing. Dr. Baik received a Ph.D. in computer science from Korea University. JoonMin Gil is a professor in the Department of Computer Science Education at Catholic University of Daegu, Korea. His recent research interests include grid computing, distributed and parallel computing, Internet computing, P2P networks, and wireless networks. Dr. Gil received his Ph.D. in computer science from Korea University. He is a member of the IEEE and the IEICE. SoonYoung Jung is a professor in the Department of Computer Science Education at Korea University. His research interests include grid computing, web-based education systems, database systems, knowledge management systems, and mobile computing. Dr. Jung received his Ph.D. in computer science from Korea University. ChongSun Hwang is a professor in the Department of Computer Science and Engineering at Korea University. His research interests include distributed systems, distributed algorithms, and mobile computing. Dr. Hwang received a Ph.D. in statistics and computer science from the University of Georgia.     

Comparison of Three‐Dimensional Korean Male Anthropometric Data with Modeling Data Generated by Digital Human Models

The purpose of this study was first to extract the anthropometric data of typical Korean male adults, based on the three‐dimensional anthropometric data measured through the Size Korea project. The data were then analyzed to identify the differences in the anthropometric characteristics between typical Koreans and 3D Korean mannequinmannequins generated by digital human models. Revision equations were then suggested to improve the inaccuracy of digital human models. Typical Korean adults subject to the 3D body scan data were selected by factor analysis with respect to the 5th, 50th, and 95th percentiles. Comparisons of anthropometric differences included the differences of the height and length variables in the vertical direction and the breadth, depth, and circumference variables in the horizontal direction. These comparisons demonstrated the differences in the anthropometric characteristics between typical Koreans and Korean mannequins based on differences in body shape and proportions between Korean and Western populations. Typical Koreans have shorter legs and longer torso than those of such mannequins generated from their own modeling algorithms, and the body shape of Koreans is more of an inverted triangular shape compared to the models. Although 3D digital human models are required to be modified to appropriately reflect the Asian body shape, modification of the modeling algoritms is not available to the public. The revision equations that convert the Korean modeling data of RAMSIS and Human in CATIA into typical Korean anthropometric data were instead suggested by regression analysis. It is expected that the proposed revision equations will help the designer evaluate design alternatives and improve the suitability of ergonomic evaluation for Korean customers. © 2012 Wiley Periodicals, Inc.     

MFR (Multipurpose Field Robot) for installing construction materials

The objective of the study was to propose a MFR (Multipurpose Field Robot) in hazardous operation environments. This system combines a basic system composed of a multi-DOF (Degree Of Freedom) manipulator and a mobile platform with an additional module for construction, national defense and emergency-rescue. According to an additional module type combined with a basic system, it can be used in a various fields. In this study, we describe a prototype of construction robot which helps a human operator handle easily construction materials in case of using the cooperation system on construction site. This study introduces an additional module for construction and a robot control algorithm for a HRC (Human-Robot Cooperation). In addition, it proposes a novel construction method to install construction materials with robot on construction site. Seung Yeol Lee received the B.S. degree from the Department of Mechanical Engineering, Myungji University, Seoul, Korea in 2002, and the M.S. degree from the Department of Mechatronics Engineering, Hanyang University, Seoul, Korea in 2005. He is a Ph.D. degree candidate from the Department of Mechanical Engineering, Hanyang University, Seoul, Korea. From 2003, He is currently a visiting researcher in the Research Institute of Technology, Construction Group at the Samsung Corporation, Korea conducting the design and implementation of construction robot and automation system for construction project. His research interests include design, control, and application of construction robots, field robotic systems and ergonomic design of robotic systems. He is a member of the Korea Society of Mechanical Engineers, Architectural Institute of Korea, and Ergonomics Society of Korea. Yong Seok Lee received the B.S. degree from the Department of Precision Mechanical Engineering, Kunsan national University, Kunsan, Korea in 2002, and the M.S. degree from the Department of Precision Mechanical Engineering, Hanyang University, Seoul, Korea in 2005. Currently, he is the Post Master in Hanyang University, Korea. His major interests include design and kinematic/dynamic analysis on multi-purpose field robots and service robots. He is a member of the Architectural Institute of Korea. Bum Seok Park received the B.S. degree from the Department of Mechanical Engineering, Hanyang University, Ansan, Kyung-gi Do, Korea in 1993, and the M.S. degree from the Department of Mechatronics Engineering, Hanyang University, Seoul, Korea in 1998. He is a Ph.D. from the Department of Mechatronics System Engineering, Hanyang University, Seoul, Korea From 2006. He is currently the post-doctor in Hanyang University, Korea. His major interests include embedded robot control system on multi-purpose field robot and service robot. He is a member of the Korea Society of Mechanical Engineers, Korean Society of Machine Tool Engineers. Sang Heon Lee graduated with the B.S. degree in Precision Mechanical Engineering from Hanyang University, Seoul, Korea in 1992. He received the M.S. degree in Precision Engineering from KAIST, Taejon, Korea in 1994 and the Ph.D. degree in Mechanical Engineering from KAIST in 2001. Currently, he is a senior researcher in Samsung Corporation, Korea. His major interests include the kinematic/dynamic analysis on multi-body system, application of field robots, and automation in construction. ChangSoo Han received the B.S. degree from the Department of Mechanical Engineering, Seoul National University Technology, Seoul, Korea in 1983, and the M.S. and Ph.D. degrees from the Department of Mechanical Engineering, University of Texas at Austin, in 1985 and 1989, respectively. From May 1988 to September 1989, he was a Research Assistant, Robotics Lab in Mechanical Engineering about manufacturing of the high resolution micro manipulator module. In March 1990, he joined Hanyang University, Ansan, Kyungki-Do, Korea as a Professor, Department of Mechanical Engineering. From March 1993 to February 1995, he was a Vice President, The Research Institute of Engineering & Technology of the Hanyang University. From August 1996 to July 1997, he was a Visiting Professor, Univ. of California at Berkeley. From September 1997 to February 1999, he was a Director, Hanyang Business Incubator. In August 2000, he joined a Branch President, The Korean Society of Mechanical Engineers. In January 2002, he joined a Committee Member, The Korean Society of Mechanical Engineers. From January 2001 to December 2001, he was an International Cooperation Director, The Institute of Control, Automation and Systems, Korea. His research interests include design, control, and application of robot, automation systems, and advanced vehicle.     

Today''s students, tomorrow''s engineers: an industrial perspective on CAD education

Today, they are students in colleges and universities. Tomorrow, they will be engineers in various industrial sectors. One of the primary goals of education is to prepare people for successful careers in the real world. As in every course, students want to obtain the maximum value of a CAD related course for their future careers. They want to obtain knowledge and skills that are most practical and useful to them when they become engineers. College professors and teachers also want to provide the maximum value for students in their CAD courses. The question is: what should be included in such a CAD curriculum. This paper tries to answer some critical questions related to developing such a curriculum, from an industrial perspective, based on the authors' survey results and the first author's own (rather limited) experiences as a R&D staff for a CAD vendor. It focuses on issues related to teaching and training students on CAD systems. These include, for different roles, how much underlying mathematical foundations in CAD systems should be taught, how much computer skills and engineering knowledge the students should know, how much design methodologies related to CAD systems should be taught, and how much ability the students should develop in order to specify their CAD needs and to evaluate and choose the CAD systems most suitable for their specific applications. The paper then shares some personal experiences and suggestions from long-term CAD veterans on the essential topics of CAD education. Based on the survey results, last section concludes the paper by authors' suggestions on what should be included in CAD curriculums for different levels of students.