浅谈化学品仓库火灾的扑救

化学品仓库集中存放着许多化工产品,这些产品性质复杂,多数有易爆、易燃、有毒、有腐蚀性的特点,扑救这类化学品的火灾是一项比较复杂的工作。如不能用水（包括水蒸气和含水的泡沫剂）扑救的化学品就有金属钠、钾、钙、镁、钍、铝粉、铝镁合金、氰化钠、硼氢化物、电石、磷化钙、发烟硫酸、氯磺酸、三氯化磷、五氯化二磷、无水氯化铝、过氧化钠、氯化硫酰、四氯化硅、五氨化锑、氯乙酰、苯基氯硅烷等忌水物质。     

传统手工艺的当代价值

自然界,为人类提供了生存、生活,以及进行创造的物质基础。人们在自然界的劳动实践中,获取了竹、木、柳、藤、草、棉、革、漆、土、玉、石、陶、瓷、金、银、铜、铁、锡等成为生活用品的材料。随着造物活动的扩大,人们也创造了与这些材质相适应的雕、镂、刻、削、染、缝、绘、髹、铸、琢、磨等工艺。     

2010～2011年世界塑料工业进展

收集了2010年7月～2011年6月世界塑料工业的相关资料,介绍了2010～2011年世界塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况。按通用热塑性树脂(聚乙烯、聚丙烯、聚氯乙烯、聚苯乙烯、ABS树脂),工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚),特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮),通用热固性树脂(酚醛、不饱和聚酯树脂、环氧树脂、聚氨酯)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍。     

全国第十二届非均相分离学术交流会暨2015两岸过滤与分离技术交流大会征文通知

<正>非均相物系的分离是工业过程的基本单元过程,广泛应用在能源、资源、水资源、三废治理、气体净化、PM2.5的防治与降低、生物、材料、石化、化工、冶金、机械、电力、制药、中药现代化、食品、饮料、酒类、农产品加工、轻工、农副产品加工等各个领域。进入21世纪,世界能源匮乏、资源贫化、三废问题更加突出,对非均相分离技术的要求更高更复杂。当前科学技术的不断发展,特别是在生物化工、精细化工、新型材料等高新技术领域的迅速发展,促进了非均相分离技术的进步与提高。     

秦皇岛玻璃工业研究设计院矿山所为您提供

正硅砂、砂岩、长石、白云石、石灰石等玻璃原料的实验室及半要业试验硅砂、砂岩、长石、白云石、石灰石等玻璃原料的采矿、选矿设计和工程总承包硅砂、砂岩、长石、白云石、石灰石矿的技术改造及技术咨询提供硅砂矿用专用各种型号的水力旋流器、分级机、受阻沉降器、擦洗机、螺旋溜槽砂岩矿专用各种型号的水力旋流器、分级机、受阻沉降器、湿式中磁磁洗机     

工业评述2001～2002年国外塑料工业进展

收集了2001年7月到2002年6月有关国外塑料工业的相关期刊资料,介绍了2001年到2002年国外塑料工业的发展情况,提供了世界各地域塑料原材料的产量及构成比,日本、美国、加拿大、德国、法国、比利时、墨西哥、芬兰、西班牙等国家的树脂产量、消费量及增长率,以及日本、西欧、北美等地区的不同品种塑料原料消费量和增长率统计.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、通用热固性树脂(酚醛、聚氨酯、不饱和树脂、环氧树脂)、特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮)不同品种的顺序,对树脂的产量、消费量及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等有关技术作了详细的介绍.     

节能减排，催化剂大有可为

据报道,全球18种重要的化学品[乙烯、丙烯、聚乙烯、聚丙烯、甲醇、乙二醇、环氧乙烷、氨、苯酚、对苯二甲酸、对二甲苯、氯乙烯、丙烯晴、己内酰胺、苯乙烯、环氧丙烷、BTX（苯、甲苯、二甲苯）和异丙苯]生产所需能源占化工行业能源需求的80％。     

秦皇岛玻璃工业研究设计院矿山所为您提供

硅砂、砂岩、长石、白云石、石灰石等玻璃原料的实验室及半要业试验硅砂、砂岩、长石、白云石、石灰石等玻璃原料的采矿、选矿设计和工程总承包硅砂、砂岩、长石、白云石、石灰石矿的技术改造及技术咨询提供硅砂矿用专用各种型号的水力旋流器、分级机、受阻沉降器、擦洗机、螺旋溜槽     

秦皇岛玻璃工业研究设计院矿山所为您提供

正硅砂、砂岩、长石、白云石、石灰石等玻璃原料的实验室及半要业试验●硅砂、砂岩、长石、白云石、石灰石等玻璃原料的采矿、选矿设计和工程总承包●硅砂、砂岩、长石、白云石、石灰石矿的技术改造及技术咨询●提供硅砂矿用专用各种型号的水力旋流器、分级机、受阻沉降器、擦洗机、螺旋溜槽●砂岩矿专用各种型号的水力旋流器、分级机、受阻沉降器、湿式中磁磁洗机     

1995—1996年国外塑料工业进展

收集了１９９５年７月到１９９６年６月国外塑料工业相关的期刊资料，介绍１９９５～１９９６年国外塑料工业进展。提供了美国、日本、德国、韩国、法国、荷兰、比利时、意大利等生产国及亚洲、西欧（包括全部欧洲联盟国家和奥地利、芬兰、挪威、瑞士和瑞典）、东欧、北美、中南美、非洲和大洋洲等地域的塑料材料产量，作为对比提供了中国台湾和外刊报导的中国塑料产量。按通用热塑性树脂（包括高密度聚乙烯、低密度聚乙烯、线型低密度聚乙烯、聚丙烯、聚苯乙烯、ＡＢＳ和聚氯乙烯）、工程塑料（包括尼龙、聚碳酸酯、热塑性聚酯、聚甲醛和改性ＰＰＯ／ＰＰＥ）、通用热固性树脂（包括酚醛、聚氨酯、不饱和聚酯和环氧树脂）、特种工程塑料（包括聚苯硫醚、液晶聚合物、聚醚砜、聚醚醚酮、和聚芳酯）、有机硅树脂、有机氟树脂、丙烯酸树脂和降解塑料的顺序，对塑料材料产量、消费量和合成工艺、产品应用开发、树脂品种延伸等技术进展作了详尽介绍。     

Effect of the density of the electronic states at the valence orbital of the bridge redox molecule on the dependence of the tunnel current on the overvoltage in the case of fully adiabatic electron transition

Effect of the density of the electronic states at the valence orbital of the bridge redox molecule on the dependence of the tunnel current on the overvoltage and on the width at half maximum of the current-overvoltage curve is studied. A number of the approximate expressions for the density of states, the tunnel current and the width are obtained in the fully adiabatic limit for different particular cases. It is shown that at small values of the coupling of the electronic levels of the electrodes with the valence orbital of the redox molecule and the small values of the bias voltage two regions of the reorganization Gibbs energy exist with different dependence of the width on the reorganization Gibbs energy. The results of calculations of the density of states, the tunnel current and the width are presented and used for the interpretation of the experimental data [N.G. Tao, Phys. Rev. Lett. 76 (1996) 4066, I. Visoly-Fisher, K. Daie, Y. Terazono, C. Herrero, F. Fungo, L. Otero, E. Durantini, J.J. Silber, L. Sereno, D. Gust, T.A. Moore, A.L. Moore, S.M. Lindsay, PNAS 103 (2006) 8686].     

陶瓷墙地砖干法制粉造粒立柱与颗粒均匀度的影响

针对陶瓷墙地砖干法制粉造粒立柱对颗粒均匀度的影响.基于不同的造粒立柱几何参数,采用干法制粉制备颗粒,分析造粒立柱对颗粒均匀度的影响;同时基于CFD方法构建陶瓷墙地砖干法制粉混料过程欧拉-欧拉双流体模型,数值模拟验证实验的正确性.实验检测表明:当造粒立柱几何参数依次为6 mm、7 mm、8 mm、9 mm、10 mm时,对应制备颗粒最大均匀度为4.81、4.97、5.23、5.17、4.99,颗粒平均均匀度为4.71、4.85、4.98、4.87、4.83.数值模拟表明:当造粒立柱几何参数依次为6 mm、7 mm、8 mm时,粉体的分散性逐渐变好,团聚现象逐渐消失;当造粒立柱几何参数依次为9 mm、10 mm时,粉体的分散性逐渐变差,团聚现象逐渐明显.综合分析说明:造粒立柱几何参数为8 mm时,颗粒均匀度最大,粉体分散性最好,团聚现象不明显,且实验检测与数值模拟基本相吻合.     

Will it Pay?: The Economics of Establishing a Bleaching,Dyeing and Finishing Works

Meetings of the Scottish Region, held in the Whitehall Restaurant, Glasgow, on 1 October 1968, Mr J. B. Scales in the chair; of the Nottingham Junior Section, held in the Midland Design and Building Centre, Nottingham, on 28 October 1968, Mr C. E. Woodward in the chair; of the Northern Ireland Region, held in the Abercorn Restaurant, Belfast, on 12 November 1968, Mr T. H. Wood in the chair; of the West Riding Region, held at the University of Bradford, on 12 December 1968, Professor R. L. Elliott in the chair; of the West of England and South Wales Region, held at ICI Ltd, Bristol, on 15 January 1969, Mr N. W. Palmer in the chair; of the Manchester Region, held at the Manchester Literary and Philosophical Society, on 16 January 1969, Mr J. Greenwood in the chair; of the Huddersfield Junior Section, held in the Huddersfield College of Technology, on 10 February 1969, Mr C. Senior in the chair; and of the Leeds Junior Section, held at the University of Leeds, on 11 March 1969, Mr A. S. Ferguson in the chair The economics of establishing a bleaching, dyeing and finishing works in modern buildings on a virgin site or on an existing site with good water and effluent services where the old buildings have been demolished are considered.     

管道泡状流相分布模式和分布机理研究进展

对管道泡状流的相分布模式和分布机理进行了详细的回顾和介绍。从前人研究的结果发现,相分布与流动条件有关,对于小管径泡状上升流,相分布主要表现为壁面峰值分布、中间峰值分布、中心峰值分布、过渡分布和扁平分布模式;而对于小管径泡状下降流,相分布主要表现为偏离中心峰值分布、钟形分布和中心峰值分布模式。然而对于大管径泡状流,相分布与流向无关,主要表现为壁面峰值分布和中心峰值分布两种模式。除此之外,还存在双峰分布模式和双鞍分布模式。影响相分布的主要因素有气泡尺寸、管道尺寸、气液相速度、气泡的注入位置和注入方法、重力水平,而气泡尺寸为关键因素。调查发现,到目前为止仍未形成一个可以解释所有相分布模式的通用机理。部分物理现象仅通过分析升力、湍流扩散力、壁面斥力以及其他力的平衡给予定性分析。未来应进一步研究相间作用力模型、湍流相干结构对气泡输运机理等问题。     

煤炭高梯度磁选-浮选脱硫降灰试验

通过分析煤样性质,说明原煤中无机硫主要以硫化铁硫为主,有机硫较高,仅依靠物理方法很难达到理想脱除效果。通过煤粉高梯度磁选试验研究了磁介质、磁通密度、脉冲对煤炭磁选效果的影响。结果表明:聚磁介质选用不加铜套细网介质,当磁通密度为1.295 T,脉冲为25次/min时,煤粉湿法高梯度磁选脱硫效果最好,此时硫分为1.59%,精煤产率为85.44%,脱硫率为31.87%,脱灰率为38.17%,黄铁矿硫脱除率为45.02%。通过正交试验确定了最佳高梯度磁选条件为:煤粉粒度0.075 mm,磁通密度1.295 T,脉冲25次/min,可得到硫分1.35%,灰分10.37%的磁选精煤产品。最后对磁选精煤进行再浮选试验,得到最佳浮选条件为:石灰500 g/t,捕收剂1360 g/t,起泡剂90 g/t,可获得产率76.29%,硫分1.28%,灰分8.14%的精煤,产品脱硫率为57.73%,脱灰率为58.52%,黄铁矿硫脱除率为84.56%。采用磁选-浮选综合流程,煤粉基本达到理想的脱硫降灰效果,可作为煤种脱硫降灰技术方案的参考。     

Refractory compounds of basic composition for the monolithin lining of steel-teeming ladles

Conclusions Questions of the method of production of basic ramming compounds at Panteleimonovka Refractory Plant and their use in the monolithic lining of the walls of 160-ton steel-teeming ladles of the No. 2 Converter Shop of Kirvoi Rog Steel Combine are considered.An analysis of the wear of the lining during service showed that it occurs as the result of spalling of the sintered zone and salamandering of the lining. The use of a movable thermally insulated lid made it possible to hold the temperature of the ladle lining within limits of 730–1120°C between heats and to obtain a basic rammed lining life of 21–39 heats as opposed to an average life for the shop of 14.8 heats.A reserve for increasing the ladle basic lining life is optimization of the thermal conditions of its service, including high-temperature heating of the lining before pouring of the metal, the use of thermally insulated lids with the minimum consumption of time for placing of them, an increase in the life of the well refractory to the life of the walls and bottom, and elimination of cooling of the lining between heats.A Discussion: Problems of the Production and Use of Refractories for the Lining of Steel-Teeming Ladles. [For the start of the discussion see No. 8 (1988) and for the continuation Nos. 9–12 (1988) and Nos. 1–3, 5, and 7 (1989).]Deceased.I. I. Glaka, N. F. Drobot, N. V. Kurmaz, B. P. Zinchenko, S. A. Poznyak, I. M. Ryaboshapkin, V. V. Slushko, A. A. Chulkov, Yu. Bormatov, S. I. Vanchyuk, V. I. Dobrovol'skii, B. G. Zhuravel', N. I. Kiyan, L. I. Nekrasov, N. M. Sokolov, P. V. Khomenko, G. A. Nikitenko, S. Dorgobuzov, P. I. Valiev, N. N. Gorbatko, V. I. Kovalenko, and M. I. Lyakhov of Krivoi Rog Steel participated in the preparation and tests of the basic monolithic linings.Translated from Ogneupory, No. 8, pp. 1–4, August, 1989.     

陶瓷墙地砖干法造粒过程坯料粉体成形与造粒室转速的影响

为分析陶瓷墙地砖干法造粒过程坯料粉体成形与造粒室转速的关系.基于欧拉-欧拉双流体模型模拟陶瓷干法造粒混料过程数理模型,同时对坯料粉体粗糙度、粉体级配及粉体流动性指数进行实验分析,验证数值模拟的正确性.当造粒室转速分别为120 RPM、140 RPM、160 RPM时,坯料粉体体积分布大小基本保持不变,坯料粉体均匀性和分散性逐渐变好,团聚现象逐渐消失;当造粒室转速分别为180 RPM、200 RPM时,坯料粉体体积分布大小仍基本保持不变,坯料粉体均匀性和分散性逐渐变差,团聚现象逐渐明显.实验结果表明:当造粒室转速分别为120 RPM、140 RPM、160 RPM、180 RPM、200 RPM时,坯料粉体粗糙度系数平均值依次为1.79、1.77、1.68、1.74、1.78;粉体级配百分比依次为73％、77％、89％、80％、72％;流动性指数依次为63.54、66.95、69.75、68.32、67.21.综合分析说明:造粒室转速为160 RPM时,坯料粉体均匀性和分散性良好,且无明显团聚现象,此时坯料粉体粗糙度系数平均值最小、粉体级配百分比最高、流动性指数最大,即造粒效果最好.     

Some gas phase reactions during the firing of magnesite-chromite refractories in a tunnel kiln

Conclusions A correlation is shown between the high-temperature, physicochemical processes in basic refractories, changes and reactions in the gaseous phase, and the nature of the wear of the roof of a tunnel kiln.As a result of dissociation, oxidation, and volatilization the waste gases are enriched with vapors of alkalis, CrO₃, sulfur trioxide, and oxides of iron and magnesium, and become corrosive with respect to the kiln lining. The reaction of the oxides vapors with each other and with the lining of the roof and their condensation determines the nature of the wear in the magnesite-chromite refractories, the chemical and mineral compositions of the resulting deposits and crusts. The main source of alkalis and sulfur trioxide is the sulfite yeast dregs (sulfite lye) present in the goods being fired.We determined the temperature relationship with the composition and amounts of deposits and crusts. Carcase and skeletal deposits and crusts formed on the firing section of the kiln, mainly periclase and spinel compositions; in the warming-up section the deposits were brittle, granulated, consisting of sulfates, chromates, chromium oxide, periclase, and spinels.It was found that the deposits on the walls of the pores in the MKhS refractories consist of sulfates and chromates, forming solid solutions.Translated from Ogneupory, No. 5, pp. 13–16, May, 1980.     

Lipids and phenols in table olives

The olive fruit is essentially constituted by the epicarp, or skin, mesocarp, or pulp, and the endocarp, or stone, and the latter includes the seed. Table olives (also called eating olives) are prepared from healthy, specifically cultivated, olive varieties picked at the right maturation stage and whose quality, after appropriate processing, corresponds to that of an edible well preserved product. The most important industrial preparations of table olives are the Spanish (or Sevillian) for green olives, the Californian for oxidised black olives, and the Greek for naturally black olives. In the Spanish and Californian procedures, olives are treated with a diluted aqueous NaOH solution, that brings about several changes in the susceptible classes of compounds in the fruit. Note, however, that the composition of the triglycerides remain unaffected by these procedures. After the treatment the olives are rinsed to remove the alkali, and the fruit is then left to ferment in brine for several months. The production of naturally black olives in brine, according to the Greek traditional method, is a simple, natural process which does not use chemicals. The main phenols in the olive are oleuropein, hydroxytyrosol (β(3‐4‐dihydroxyphenyl)ethanol), tyrosol (β(4‐hydroxyphenyl) ethanol) and verbascoside; the major polycyclic triterpenes are the oleanolic and maslinic acids. The NaOH treatment hydrolysed oleuropein into β(3‐4‐dihydroxyphenyl) ethanol, oleoside 11‐methylester and oleoside. These last glucosides and the oleuropein itself, in acidic medium, yielded glucose and a number of compounds called, collectively, oleuropein aglycones. During the fermentation process phenols diffuse from the pulp into the brine. Also, even during the alkaline treatment, there is the rapid diffusion of the pentacyclic oleanolic and maslinic acids salts into the brine.     

Experimental technology for manufacturing ceramic articles

The production of ceramic articles includes five principal operations, namely, preparation of the powder, pressing of the preform, its treatment, sintering, and grinding. If it is necessary to increase the adaptability to manufacture and improve the physicomechanical properties of the sintered material, the operations of hydrostatic treatment of the powder, preliminary sintering of the preforms, repeated mechanical treatment, etc. can be added. The technology is used for manufacturing the working part of cutting tools, dies, tools for shaping alloys of nonferrous metals, bearings, hinges, valves, ball locks, nozzles of hydromonitors, parts of pressing molds, lining parts, milling bodies, etc.Translated from Ogneupory i Tekhnicheskaya Keramika, No. 6, pp. 25 – 27, June, 1996.