Effect of magnetic field and initial stress on the propagation of interface waves in transversely isotropic perfectly conducting media

Elasto-dynamical equations for transversely isotropic solids have been employed to investigate the general theory of transversely isotropic magneto-elastic interface waves in conducting media under initial hydrostatic tension or compression. Particular cases of interface waves such as Rayleigh, Love and Stoneley waves have been investigated in details. In all cases, the wave velocity equations have been deduced which are in complete agreement with the corresponding results of classical surface waves of the same types where magnetic fields and initial stresses are absent. Results obtained in this paper may be considered as more general and important in the sense that the corresponding results of classical surface waves due to Rayleigh, Love and Stoneley can readily be deduced from our results as special cases. Numerical calculations and graphs have been presented in the case of Love waves and conclusions are drawn.     

Size-dependent effective dynamic properties of unidirectional nanocomposites with interface energy effects

This article studies the size effect on wave propagation characteristics of plane longitudinal and transverse elastic waves in a two-phase nanocomposite consisting of transversely isotropic and unidirectionally oriented identical cylindrical nanofibers embedded in a transversely isotropic homogeneous matrix. The surface elasticity theory is employed to incorporate the interfacial stress effects. The effect of random distribution of nanofibers in the composite medium is taken into account via a generalized self-consistent multiple scattering model. The phase velocities and attenuations of longitudinal and shear waves along with the associated dynamic effective elastic constants are calculated for a wide range of frequencies and fiber concentrations. The numerical results reveal that interface elasticity at nanometer length scales can significantly alter the overall dynamic mechanical properties of nanofiber-reinforced composites. Limiting cases are considered and excellent agreements with solutions available in the literature have been obtained.     

Dynamic crack problems in three-dimensional transversely isotropic solids

In this paper, a general boundary element approach for three-dimensional dynamic crack problems in transversely isotropic bodies is presented for the first time. Quarter-point and singular quarter-point elements are implemented in a quadratic isoparametric element context. The procedure is based on the subdomain technique, the displacement integral representation for elastodynamic problems and the expressions of the time-harmonic point load fundamental solution for transversely isotropic media. Numerical results corresponding to cracks under the effects of impinging waves are presented. The accuracy of the present approach for the analysis of dynamic fracture mechanics problems in transversely isotropic solids is shown by comparison of the obtained results with existing solutions.     

Circular crested waves in anisotropic thermoelastic plates bordered with inviscid liquid

The propagation of circularly crested waves in a homogeneous, transversely isotropic, thermally conducting plate bordered with layers of inviscid liquid or half space of inviscid liquid on both sides is investigated in the context of conventional coupled thermoelasticity, Lord-Shulman and Green-Lindsay theories of thermoelasticity. Secular equations for circular homogeneous transversely isotropic plate in closed form and isolated mathematical conditions for symmetric and antisymmetric wave modes in completely separate terms are derived. The results for isotropic materials and uncoupled theories of thermoelasticity have been obtained as particular cases. The special cases such as short wavelength waves, thin plate waves and leaky Lamb waves of the secular equation are also deduced and discussed. The amplitudes of displacement components and temperature change have also been computed and studied. Finally, the numerical solution is carried out for transversely isotropic circular plate of cobalt material bordered with water. The dispersion curves for symmetric and antisymmetric wave modes, attenuation coefficient and amplitudes of displacement and temperature change in case of fundamental symmetric (S₀) and skew symmetric (A₀) modes are presented in order to illustrate and compare the theoretical results. The analytical and numerical results are found to be in close agreement.     

Love waves propagation in a piezoelectric layered structure with initial stresses

Summary. The propagation behavior of Love waves in a piezoelectric layered structure with inhomogeneous initial stress is studied. Solutions of the mechanical displacement and electrical potential function are obtained for the isotropic elastic layer and transversely isotropic piezoelectric substrate, respectively, by solving the coupled electromechanical field equations. Firstly, effects of the inhomogeneous initial stress on the dispersion relations and phase velocity of Love wave propagation are discussed. Then the influence of the initial stress gradient coefficient on the stress, mechanical displacement and electrical potential distribution in the layer and the substrate is investigated in detail. The results reported in this paper are not only meaningful for the design of surface acoustic wave (SAW) devices with high performance, but also effective for evaluating the residual stress distribution in the layered structures.     

Thermoelastic Lamb waves in a transversely isotropic plate bordered with layers of inviscid liquid

Analysis for the propagation of thermoelastic waves in a homogeneous, transversely isotropic, thermally conducting plate bordered with layers of inviscid liquid or half space of inviscid liquid on both sides, is investigated in the context of coupled theory of thermoelasticity. Secular equations for homogeneous transversely isotropic plate in closed form and isolated mathematical conditions for symmetric and anti-symmetric wave modes in completely separate terms are derived. The results for isotropic materials and uncoupled theories of thermoelasticity have been obtained as particular cases. It is shown that the purely transverse motion (SH mode), which is not affected by thermal variations, gets decoupled from rest of the motion of wave propagation and occurs along an in-plane axis of symmetry. The special cases, such as short wavelength waves and thin plate waves of the secular equations are also discussed. The secular equations for leaky Lamb waves are also obtained and deduced. The amplitudes of displacement components and temperature change have also been computed and studied. Finally, the numerical solution is carried out for transversely isotropic plate of zinc material bordered with water. The dispersion curves for symmetric and anti-symmetric wave modes, attenuation coefficient and amplitudes of displacement and temperature change in case of fundamental symmetric (S₀) and skew symmetric (A₀) modes are presented in order to illustrate and compare the theoretical results. The theory and numerical computations are found to be in close agreement.     

Small torsional vibration superposed on finitely deformed state of a circular cylindrical rod of transversely isotropic elastic material

Starting with a class of small deformations superposed on a finitely deformed state of a transversely isotropic elastic solid, we study a problem of small torsional vibration superposed on homogeneous finitely deformed state of a circular cylindrical rod made of transversely isotropic elastic material. It has been found that free vibration is possible and, due to anisotropy, the speed of propagation of waves of torsion along the cylinder is increased or decreased according as the initial stressed state is under tension or compression.     

Interface waves along an anisotropic imperfect interface between anisotropic solids

First and second order asymptotic boundary conditions are introduced to model a thin anisotropic layer between two generally anisotropic solids. Such boundary conditions can be used to describe wave interaction with a solid-solid imperfect anisotropic interface. The wave solutions for the second order boundary conditions satisfy energy balance and give zero scattering from a homogeneous substrate/layer/substrate system. They couple the in-plane and out-of-plane stresses and displacements on the interface even for isotropic substrates. Interface imperfections are modeled by an interfacial multiphase orthotropic layer with effective elastic properties. This model determines the transfer matrix which includes interfacial stiffness and inertial and coupling terms. The present results are a generalization of previous work valid for either an isotropic viscoelastic layer or an orthotropic layer with a plane of symmetry coinciding with the wave incident plane. The problem of localization of interface waves is considered. It is shown that the conditions for the existence of such interface waves are less restrictive than those for Stoneley waves. The results are illustrated by calculation of the interface wave velocity as a function of normalized layer thickness and angle of propagation. The applicability of the asymptotic boundary conditions is analyzed by comparison with an exact solution for an interfacial anisotropic layer. It is shown that the asymptotic boundary conditions are applicable not only for small thickness-to-wavelength ratios, but for much broader frequency ranges than one might expect. The existence of symmetric and SH-type interface waves is also discussed.     

Axisymmetric time-harmonic response of a transversely isotropic substrate–coating system

By virtue of a method of displacement potentials, an analytical treatment of the response of a transversely isotropic substrate–coating system subjected to axisymmetric time-harmonic excitations is presented. In determination of the corresponding elastic fields, infinite line integrals with singular complex kernels are encountered. Branch points, cuts, and poles along the path of integration are accounted for exactly, and the physical phenomena pertinent to wave propagation in the medium are also highlighted. For evaluation of the integrals at the singular points, an accurate analytical residual theory is presented. Comparisons with the existing numerical solutions for a two-layered transversely isotropic medium under static surface load, and a transversely isotropic half-space subjected to buried time-harmonic load are made to confirm the accuracy of the present solutions. Selected numerical results for displacements and stresses are presented to portray the dependence of the response of the substrate–coating system on the frequency of excitation and the role of coating layer.     

Analysis of elliptical cracks perpendicular to the interface of two joined transversely isotropic solids

This paper presents a boundary element analysis of elliptical cracks in two joined transversely isotropic solids. The boundary element method is developed by incorporating the fundamental singular solution for a concentrated point load in a transversely isotropic bi-material solid of infinite space into the conventional displacement boundary integral equations. The multi-region method is used to analyze the crack problems. The traction-singular elements are employed to capture the singularity around the crack front. The values of stress intensity factors (SIFs) are obtained by using crack opening displacements. The results of the proposed method compare well with the existing exact solutions for an elliptical crack parallel to the isotropic plane of a transversely isotropic solid of infinite extent. Elliptical cracks perpendicular to the interface of transversely isotropic bi-material solids of either infinite extent or occupying a cubic region are further examined in detail. The crack surfaces are subject to the uniform normal tractions. The stress intensity factor values of the elliptical cracks of the two types are analyzed and compared. Numerical results have shown that the stress intensity factors are strongly affected by the anisotropy and the combination of the two joined solids.     

Effect of An Initial Stress on SH-Type GuidedWaves Propagating in a Piezoelectric Layer Bonded on A Piezomagnetic Substrate

Propagation of SH-type guided waves in a layered structure with an invariant initial stress is studied, where a piezoelectric thin layer is perfectly bonded on a piezomagnetic substrate. Both the layer and the substrate possess transversely isotropic property. The dispersion relations of SH waves are obtained for four kinds of different electro-magnetic boundary conditions. The effects of initial stress, thickness ratio and electro-magnetic boundary conditions on the propagation behaviors are analyzed in detail. The numerical results show that: 1) The positive initial stresses make the phase velocity increasing, while the negative initial stresses decrease the phase velocity; 2) The smaller the thickness ratio of a piezoelectric layer to a piezomagnetic substrate, the larger the phase velocity of SH-type guided wave propagating in the corresponding layered structure; 3) The electrical boundary conditions play a dominant role in the propagating characteristics. Moreover the phase velocities for the electrically shorted surface are smaller than that for the open case. The obtained results are useful for understanding and design of the electromagnetic acoustic wave and microwave devices.     

Elastostatic Green’s functions for an arbitrary internal load in a transversely isotropic bi-material full-space

The problem of a full-space which is composed of two half-spaces with different transversely isotropic materials with an internal load at an arbitrary distance from the interface is considered. By virtue of Hu-Nowacki-Lekhnitskii potentials, the equations of equilibrium are uncoupled and solved with the aid of Hankel transform and Fourier decompositions. With the use of the transformed displacement- and stress-potential relations, all responses of the bi-material medium are derived in the form of line integrals. By appropriate limit processes, the solution can be shown to encompass the cases of (i) a homogeneous transversely isotropic full-space, and (ii) a homogeneous transversely isotropic half-space under arbitrary surface load. As the integrals for the displacement- and stress-Green’s functions, for an arbitrary point load can be evaluated explicitly, illustrative results are presented for the fundamental solution under different material anisotropy and relative moduli of the half-spaces and compared with existing solutions.     

Boundary element analysis of three-dimensional crack problems in two joined transversely isotropic solids

The present paper presents a boundary element analysis of penny-shaped crack problems in two joined transversely isotropic solids. The boundary element analysis is carried out by incorporating the fundamental singular solution for a concentrated point load in a transversely isotropic bi-material solid of infinite space into the conventional displacement boundary integral equations. The conventional multi-region method is used to analyze the crack problems. The traction-singular elements are employed to capture the singularity around the crack front. The values of the stress intensity factors are obtained by using crack opening displacements. The numerical scheme results are verified with the closed-form solutions available in the literature for a penny-shaped crack parallel to the plane of the isotropy of a homogeneous and transversely isotropic solid of infinite extent. The new problem of a penny-shaped crack perpendicular to the interface of a transversely isotropic bi-material solid is then examined in detail. The crack surfaces are subject to the three normal tractions and the uniform shear traction. The associated stress intensity factor values are obtained and analyzed. The present results can be used for the prediction of the stability of composite structures and the hydraulic fracturing in deep rock strata and reservoir engineering.     

Three-Dimensional Ultrasonic Crack Detection in Anisotropic Materials

The scattering of probe-generated ultrasonic fields incident upon a strip-like crack in an anisotropic half-space is discussed. In the situation considered, two possibly coinciding probes are attached to the surface of the half-space. One is transmitting waves incident upon the crack and the other one is receiving the scattered waves. An electric signal response is calculated via an electromechanical reciprocity relation. For a crack far away from the probes and the surface, an approximate expression is calculated. Several numerical examples are presented for an isotropic and a transversely isotropic solid. The results are presented as A-, B-, and C-scans.     

On the propagation of waves in layered anisotropic media in generalized thermoelasticity

In view of the increased usage of anisotropic materials in the development of advanced engineering materials such as fibers and composite and other multilayered, propagation of thermoelastic waves in arbitrary anisotropic layered plate is investigated in the context of the generalized theory of thermoelasticity. Beginning with a formal analysis of waves in a heat-conducting N-layered plate of an arbitrary anisotropic media, the dispersion relations of thermoelastic waves are obtained by invoking continuity at the interface and boundary conditions on the surfaces of layered plate. The calculation is then carried forward for more specialized case of a monoclinic layered plate. The obtained solutions which can be used for material systems of higher symmetry (orthotropic, transversely isotropic, cubic, and isotropic) are contained implicitly in our analysis. The case of normal incidence is also considered separately. Some special cases have also been deduced and discussed. We also demonstrate that the particle motions for SH modes decouple from rest of the motion, and are not influenced by thermal variations if the propagation occurs along an in-plane axis of symmetry. The results of the strain energy distribution in generalized thermoelasticity are useful in determining the arrangements of the layer in thermal environment.     

Analysis of cracked transversely isotropic and inhomogeneous solids by a special BIE formulation

In this paper, a special boundary integral equation (BIE) formation is proposed to analyze the fracture problem in transversely isotropic and inhomogeneous solids. In this formulation, the single-domain boundary element method (BEM) is utilized to discretize the cracked matrix and the displacement BEM to the surface of the embedded inhomogeneity. The two regions are then connected through the continuity conditions along their joint interface. The conventional and three special nine-node quadrilateral elements are utilized to discretize the inhomogeneity–matrix interface and the crack surface. From the crack-opening displacements on the crack surface, the mixed-mode stress intensity factors (SIFs) are calculated, using the well-known asymptotic expression in terms of the Barnett–Lothe tensor. In the numerical analysis, the distance between the inhomogeneity and the crack as well as the orientation of the isotropic plane of the transversely isotropic media is varied to show their influences on the mixed-mode SIFs along the crack fronts.     

饱和横观各向同性分数导数黏弹性土中半封闭衬砌振动响应

在频率域内研究了饱和横观各向同性分数导数黏弹性土体中深埋圆形隧道半封闭衬砌振动响应问题。根据土体在长期沉积过程中存在各向异性的特点,将土骨架视为具有分数导数本构关系的横观各向同性黏弹性体,采用饱和多孔介质理论和弹性理论,利用衬砌内边界应力协调以及土体和衬砌界面处应力和位移连续,得到了简谐荷载作用下饱和横观各向同性黏弹性土和弹性衬砌的位移、应力和孔隙水压力解析表达式。考察了饱和经典弹性土、饱和分数导数性黏弹性土和饱和经典黏弹性土三种条件下饱和黏弹性土和衬砌各参数的影响,表明：横观各向同性面的弹性模量和衬砌厚度对系统动力响应的影响与分数导数阶数和土骨架的黏性有关;渗透系数较小时,系统存在明显的共振现象。另外,在三种条件下半封闭衬砌振动响应存在较大差异。     

Modeling of 3D transversely piezoelectric and elastic bimaterials using the boundary element method

 This paper presents a numerical model for three-dimensional transversely isotropic bimaterials based on the boundary element formulation. The point force solutions expressed in a united-form for distinct eigenvalues are studied for transversely isotropic piezoelectricity and pure elasticity. A boundary integral formulation is implemented for the modeling of two-phase materials. In this study, the stress distributions are computed for a near interface flaw. The influences of the shape and location of the flaw on the the stress concentration are examined. The accuracy of the numerical procedures is validated through selected example problems and comparison studies. Received 3 October 2001 / Accepted 9 April 2002     

Inhomogeneous waves in transversely isotropic dielectrics

Summary The propagation of inhomogeneous transverse plane waves in a transversely isotropic dielectric solid is investigated within the theory of generalized piezo-thermo-elasticity. Geometrical restrictions on the real and imaginary parts of the wave vector are obtained as a consequence of the particular anisotropy of the solid. Dispersion relations for the most significant propagation modes are derived and discussed. Allowing for the inhomogeneity yields a generalization of previous results on piezo-thermo-elastic waves.     

Effects of inhomogeneity on surface waves in anisotropic media

This paper investigates the effects of anisotropy and inhomogeneity on surface waves in elastic media. Exponential variation in properties are assumed for the elastic parameters and material density. The classical equations of motion for propagation of waves in an inhomogeneous transversely isotropic elastic solid are deduced. The equations of motion for surface waves are derived and general surface waves are investigated. This general theory is then utilized to investigate Rayleigh, Love and Stoneley waves. Results obtained in the above cases reduce to the corresponding well-known classical results when inhomogeneity and anisotropy are not present. It is seen that inhomogeneity has significant effects on dispersion characteristics. Numerical calculations are included for Love waves and some conclusions have been drawn from the above calculations.