一种可增强光陷阱效应的多孔ZnO/PEIE电子传输层在高效有机太阳能电池中的应用

在本工作中,我们制备了一种多孔的有机/无机复合电子传输层(P-ZnO),并将其成功用于反向有机太阳能电池中.P-ZnO不仅拥有适宜的功函,且可形成较大欧姆接触面积的独特表面,有利于器件中的电荷提取.与ZnO基器件相比,P-ZnO基器件的活性层具有增强的光陷阱效应.在PBDB-T/DTPPSe-2F,PM6/Y6和PTB...     

基于有机金属卤化物钙钛矿材料的全固态太阳能电池研究进展

作为太阳能电池的光吸收剂,有机金属卤化物钙钛矿材料不仅具有高效的光吸收能力和载流子迁移率,还具有独特的双极性特征,能同时传输电子和空穴,使其成为优异的光伏材料,掀起了基于钙钛矿材料太阳能电池的研究热潮。介绍了近几年来基于有机金属卤化物钙钛矿材料的全固态太阳能电池的发展情况,总结了有机金属卤化物钙钛矿材料的结构和特性,对目前几类典型的钙钛矿太阳能电池进行了讨论,并展望了全固态钙钛矿太阳能电池的产业化应用前景。     

倒置钙钛矿太阳能电池的空穴传输层的研究进展

倒置钙钛矿太阳能电池(PSCs)具有器件结构简单、吸光系数高、迟滞效应小、良好的缺陷容忍性等优点,受到了广泛的关注。但倒置器件光电转换效率(PCE)尚有待提高,究其原因是空穴传输层(HTL)和钙钛矿层界面处的能量损失表现出相对较小的开路电压。文章综述了包括有机聚合物、无机物、尖晶石氧化物等作为空穴传输材料的相关研究进展,进一步分析了通过调节电极/空穴传输层能级使之与钙钛矿价带匹配,及通过界面修饰促进器件对载流子的注入与收集,从而提高光电转换效率的研究现状。对提高倒置钙钛矿太阳能电池性能的研究具有一定的指导意义,最后对倒置器件的应用前景进行了展望。     

Sputtered nickel oxide thin film for efficient hole transport layer in polymer-fullerene bulk-heterojunction organic solar cell

Bulk-heterojunction (BHJ) organic photovoltaics (OPV) are very promising thin film renewable energy conversion technologies due to low production cost by high-throughput roll-to-roll manufacturing, an expansive list of compatible materials, and flexible device fabrication. An important aspect of OPV device efficiency is good contact engineering. The use of oxide thin films for this application offers increased design flexibility and improved chemical stability. Here we present our investigation of radio frequency magnetron sputtered nickel oxide (NiO_x) deposited from oxide targets as an efficient, easily scalable hole transport layer (HTL) with variable work-function, ranging from 4.8 to 5.8 eV. Differences in HTL work-function were not found to result in statistically significant changes in open circuit voltage (V_oc) for poly(3-hexylthiophene):[6,6]-phenyl-C₆₁-butyric acid methyl ester (P3HT:PCBM) BHJ device. Ultraviolet photoemission spectroscopy (UPS) characterization of the NiO_x film and its interface with the polymer shows Fermi level alignment of the polymer with the NiO_x film. UPS of the blend also demonstrates Fermi level alignment of the organic active layer with the HTL, consistent with the lack of correlation between V_oc and HTL work-function. Instead, trends in j_sc, V_oc, and thus overall device performance are related to the surface treatment of the HTL prior to active layer deposition through changes in active layer thickness.     

Opto-electronic characterization of third-generation solar cells

We present an overview of opto-electronic characterization techniques for solar cells including light-induced charge extraction by linearly increasing voltage, impedance spectroscopy, transient photovoltage, charge extraction and more. Guidelines for the interpretation of experimental results are derived based on charge drift-diffusion simulations of solar cells with common performance limitations. It is investigated how nonidealities like charge injection barriers, traps and low mobilities among others manifest themselves in each of the studied cell characterization techniques. Moreover, comprehensive parameter extraction for an organic bulk-heterojunction solar cell comprising PCDTBT:PC₇₀BM is demonstrated. The simulations reproduce measured results of 9 different experimental techniques. Parameter correlation is minimized due to the combination of various techniques. Thereby a route to comprehensive and accurate parameter extraction is identified.     

P型(掺硼)晶硅太阳电池的光衰减机制和技术改进措施

介绍了近年来对掺硼晶硅(Cz-Si和mc-Si)太阳电池的光照衰减问题及衰减机制的研究结果。通过光照及退火处理前后少子寿命变化的研究以及光衰减与硼和氧浓度关系的研究．表明引起掺硼晶硅太阳电池光照衰减的主要因素是硼和间隙氧的存在。同时介绍了减小或避免衰减的技术措施。     

Parallel Fabrication of Plasmonic Nanocone Sensing Arrays

A fully parallel approach for the fabrication of arrays of metallic nanocones and triangular nanopyramids is presented. Different processes utilizing nanosphere lithography for the creation of etch masks are developed. Monolayers of spheres are reduced in size and directly used as masks, or mono‐ and double layers are employed as templates for the deposition of aluminum oxide masks. The masks are transferred into an underlying gold or silver layer by argon ion milling, which leads to nanocones or nanopyramids with very sharp tips. Near the tips the enhancement of an external electromagnetic field is particularly strong. This fact is confirmed by numerical simulations and by luminescence imaging in a confocal microscope. Such localized strong fields can amongst others be utilized for high‐resolution, high‐sensitivity spectroscopy and sensing of molecules near the tip. Arrays of such plasmonic nanostructures thus constitute controllable platforms for surface‐enhanced Raman spectroscopy. A thin film of pentacene molecules is evaporated onto both nanocone and nanopyramid substrates, and the observed Raman enhancement is evaluated.     

Progress in light harvesting and charge injection of dye-sensitized solar cells

Dye-sensitized solar cells (DSSCs) based on nanocrystalline semiconductors such as TiO₂ are of great interest as an alternative to the conventional solar cells because of their high performance, low-cost production, and environmental advantages. The DSSCs consist of dye molecule coated wide bandgap semiconductor layer, electrolyte, and transparent conducting oxide (TCO) film. When the DSSCs are exposed to solar light, an incident photon creates a bound electron-hole pair in dye sensitizers. Electrons then flow into the oxide nanoparticle anode due to a difference in the energy levels. On the other hand, holes move to the counter electrode through sequential redox reactions in the electrolyte. Therefore, the cell performance is influenced by parameters such as the morphology and optical properties of nanocrystalline oxide films, the electrochemical characteristics of redox electrolytes, and the photochemical properties of molecular sensitizers. In this article, we review the major components of DSSCs such as the oxide semiconductor film, sensitizing dyes, electrolytes, and TCO and discuss their progress to maximize light harvesting and charge injection efficacy. Their electrical, optical, and chemical properties are well correlated to optimize the light harvesting and charge injection of DSSCs. We have also shown recent efforts to improve the energy conversion efficiency, long term stability, sustainability and affordability by modifying or revolutionizing the components of DSSCs. This includes a prospect on the potential commercialization of DSSCs.     

TiO2 coated urchin-like SnO2 microspheres for efficient dye-sensitized solar cells

Urchin-like SnO2 microspheres have been grown for use as photoanodes in dye-sensitized solar cells （DSSCs）. We observed that a thin layer coating of TiO2 on urchin-like SnO2 microsphere photoanodes greatly enhanced dye loading capability and light scattering ability, and achieved comparable solar cell per- formance even at half the thickness of a typical nanocrystalline TiO2 photoanode. In addition, this photoanode only required attaching -55% of the amount of dye for efficient light harvesting compared to one based on nanocrystalline TiO2. Longer decay of transient photovoltage and higher charge recombination resistance evidenced from electrochemical impedance spectroscopy of the devices based on TiO2 coated urchin-like SnO2 revealed slower recombination rates of electrons as a result of the thin blocking layer of TiO2 coated on urchin- like SnO2. TiO2 coated urchin-like SnO2 showed the highest value （76.1 ms） of electron lifetime （＇r） compared to 2.4 ms for bare urchin-like SnO2 and 14.9 ms for nanocrystalline TiO2. TiO2 coated SnO2 showed greatly enhanced open circuit voltage （Voc）, short-circuit current density （Jsc） and fill factor （FF） leading to a four-fold increase in efficiency increase compared to bare SnO2. Although TiO2 coated urchin-like SnO2 showed slightly lower cell efficiency than nanocrystalline TiO2, it only used a half thickness of photoanode and saved -45% of the amount of dye for efficient light harvesting compared to normal nanocrystalline TiO2.     

Single-graded CIGS with narrow bandgap for tandem solar cells

Multi-junction solar cells show the highest photovoltaic energy conversion efficiencies, but the current technologies based on wafers and epitaxial growth of multiple layers are very costly. Therefore, there is a high interest in realizing multi-junction tandem devices based on cost-effective thin film technologies. While the efficiency of such devices has been limited so far because of the rather low efficiency of semitransparent wide bandgap top cells, the recent rise of wide bandgap perovskite solar cells has inspired the development of new thin film tandem solar devices. In order to realize monolithic, and therefore current-matched thin film tandem solar cells, a bottom cell with narrow bandgap (~1 eV) and high efficiency is necessary. In this work, we present Cu(In,Ga)Se₂ with a bandgap of 1.00 eV and a maximum power conversion efficiency of 16.1%. This is achieved by implementing a gallium grading towards the back contact into a CuInSe₂ base material. We show that this modification significantly improves the open circuit voltage but does not reduce the spectral response range of these devices. Therefore, efficient cells with narrow bandgap absorbers are obtained, yielding the high current density necessary for thin film multi-junction solar cells.     

A perspective on the recent progress in solution-processed methods for highly efficient perovskite solar cells

Perovskite solar cells (PSCs) were developed in 2009 and have led to a number of significant improvements in clean energy technology. The power conversion efficiency (PCE) of PSCs has increased exponentially and currently stands at 22%. PSCs are transforming photovoltaic (PV) technology, outpacing many established PV technologies through their versatility and roll-to-roll manufacturing compatibility. The viability of low-temperature and solution-processed manufacturing has further improved their viability. This article provides a brief overview of the stoichiometry of perovskite materials, the engineering behind various modes of manufacturing by solution processing methods, and recommendations for future research to achieve large-scale manufacturing of high efficiency PSCs.     

Graphene-CdSe nanobelt solar cells with tunable configurations

We have combined two planar nanostructures, graphene and CdSe nanobelts, to construct Schottky junction solar cells with open-circuit voltages of about 0.5 V and cell efficiencies on the order of 0.1%. By covering transparent graphene or carbon nanotube (CNT) films on selected positions along macroscopically long CdSe nanobelts, we have demonstrated the fabrication of active solar cells with many different configurations and parallel connections from individual or multiple assembled nanobelts. The graphene-CdSe nanobelt solar cells reported here show a great flexibility in creating diverse device architectures, and might be scaled up for cell integration based on assembled nanobelt arrays and patterned graphene (or CNT) films.      

Selective electron- or hole-transport enhancement in bulk-heterojunction organic solar cells with N- or B-doped carbon nanotubes

Doping improves performance. N- or B-doped carbon nanotubes (CNTs) uniformly dispersed in the active layer of P3HT/PCMB (poly (3-hexylthiophene/[6,6]-phenyl-C61-butyric acid methyl ester) bulk-heterojunction solar cells selectively enhance electron or hole transport and eventually help carrier collection. Specifically, the incorporation of 1.0 wt% B-doped CNTs results in balanced electron and hole transport and accomplishes a power conversion efficiency improvement from 3.0% (without CNTs) to 4.1%.