共查询到20条相似文献,搜索用时 145 毫秒
1.
在QXL 29型角管式强制循环热水锅炉已成功运行13年的基础上,采用最新发展的"倾斜式往复炉排"的层状燃烧技术,开发出QXW 46型角管式强制循环往复炉排热水锅炉,性能优越,结构先进。 相似文献
2.
3.
随着节能与环保要求的日益提高,更多的城市在致力于采用集中供热来适应节能与环保的要求。我厂应市场要求,同中科院工程热物理所联合开发,由我厂设计、制造的DHF29—1.6/150/90—P型循环流化床热水锅炉(简称29MW锅炉)已于1993年12月2日在河南濮阳中原油田供热厂点火成功,投入运行。该炉型是我国目前最大容量的循环流化床热水锅炉,它的投运标志着我国工业热水锅炉上了一个新台阶。 相似文献
4.
本文主要介绍29MW循环流化床热水锅炉的设计要求和热水调整与控制,采用强制循环,低倍率;解决磨损、密封等问题,14年的运行性能良好。 相似文献
5.
燃气大型热水锅炉的开发,是大型城市集中供热站的首选炉型。本文主要介绍QXS强制循环热水锅炉的结构,主要特性等。 相似文献
6.
在对采暖用热水锅炉的强制循环、自然循环、强制与自然混合循环三种循环方式分析探讨基础上,提出一种新型循环:强制与自然并联循环。 相似文献
7.
文章分别介绍了大容量燃天然气热水锅炉的三种型式,即自然循环热水锅炉、带有自然循环特性的强制循环热水锅炉和强制循环热水锅炉,并针对三种型式各自的设计特点予以比较,最终给出结论. 相似文献
8.
自然循环水管式热水锅炉在使用中经常发生爆管事故,针对这一问题,对其水循环进行了分析计算,对自然循环热水锅炉水循环回路的安全设计提出了改进意见。 相似文献
9.
10.
11.
12.
13.
James D. Rickman 《Energy Conversion and Management》1985,25(1):73-83
A new type of hydronic forced hot-water heating system is described that provides room-by-room temperature control in a series pipe loop system. It operates by alternately pumping segments of hot boiler water and cool return water in a timed heating cycle. Experiments show that the system delivers at least 49% more BTUs per foot of pipe length to rooms selected for heating than to unheated rooms. Calculations show that temperature setbacks of 3–9°F in selected rooms reduce the yearly heat loss by 5.5–20% depending on the setback schedule. 相似文献
14.
介绍了一种新型的高效节能中央空调冷暖系统-自备发电、余热利用及热泵冷暖系统。该系统充分发挥了大型建筑必备设备-自备电源应急柴油发电机的作用,使一次能源在使用中更加符合热力学的原理;该系统不追求某一种机组的高COP,而是利用各种设备的优点,有机匹配,以求一年中最高效的节能。通过与三种常规冷暖系统的一次能源利用率比较,得出该新型冷暖系统的一次能源利用率比三种常规冷暖系统的一次能源利用率高27.88%-104.6%以上。并通过实例计算了采用该系统的某大型广场的全年经济效益。 相似文献
15.
采用水动力回路分析法进行自然循环热水锅炉水动力数值计算 总被引:1,自引:0,他引:1
根据流体力学原理和锅炉水动力计算的基本原则,提出了一种能够直接计算自然循环热水锅炉各循环回路中每根单管水动力特性的自然循环热水锅炉水动力数值计算新方法,即水动力回路分析法,推导得出了基于该方法的水动力计算基本方程组,给出了其数值求解方法及程序框图,并应用该方法对两台自然循环热水锅炉进行了水动力特性计算分析,将其计算结果与按照JB/T8659-1997<热水锅炉水动力计算方法>的图解法分析结果进行比较,证明了水动力回路分析法的正确性和实用性. 相似文献
16.
17.
18.
19.
哈尔滨工业大学开发设计并取得专利的复合循环热水锅炉对烟室和炉排的优化设计及采用复合循环,具有停炉循环补偿功能,降低了锅炉的高度,节省投资。 相似文献
20.
《Applied Energy》1987,27(1):53-82
In a conventional domestic central-heating system, the boiler operates at an efficiency well below its full-load bench value due to its frequent on/off cycling. However the system's efficiency can be enhanced by incorporating a heat store between the boiler and the ‘radiators’, so that this frequency of cycling is reduced significantly. By means of two computer programs simulating the behaviour of each system, this efficiency enhancement has been evaluated, together with its sensitivities to variations of a series of key design parameters.Associated laboratory work has been undertaken to determine experimentally the preferred configuration for a pair of heat exchangers placed inside such a water-filled heat store: these exchangers can be used to provide domestic hot-water by heating mains cold-water passed through them.A storage system of the proposed type offers cost advantages over conventional systems for installations in new properties, and may be cost effective even for some retrofit systems. 相似文献