汽液固循环流化床蒸发器性能研究

研究了汽液固循环流化床蒸发器的防垢与传热性能。实验表明，在防垢的同时，可有效地强化传热，提高蒸发能力，节约投资。     

三相流化床蒸发器在无机盐工业中的应用

三相流化床蒸发器是一种新型的蒸发器，具有较好的强化传热和防垢、除垢作用。简要介绍了三相流化床蒸发器的强化传热和防垢特性，初步揭示了其强化传热和防垢机理，分析了各种操作变量对于其强化传热和防垢、除垢效果的影响。并在最后探讨了三相流化床蒸发器在无机盐工业中的应用前景。     

加入惰性固体粒子的二元物系的流动沸腾传热特性

引　言流动沸腾传热广泛存在于石油、化工、轻工、动力及能源等各个领域 ,但三相流动沸腾传热的研究极少 .李修伦等[1]在流动沸腾系统中加入惰性固体粒子 ,进行了汽 -液 -固三相流沸腾传热的初步研究 .李修伦、闻建平[2 ,3]进一步将三相流和沸腾换热相结合 ,较好地解决了沸腾传热强化和防垢、除垢问题 .李修伦、张利斌等[4 ]又采用循环流化床技术 ,结合粒子在沸腾系统中的强化特性 ,开发了汽 -液 -固三相循环流化床蒸发器 ,它具有良好的强化传热和防、除垢性能 .上述研究均属于单组分三相流动沸腾传热 ,而关于二元物系三相流动沸腾传热的研…     

表面工程技术应用于蒸发器的防垢及沸腾传热强化的研究进展

对传统的表面工程技术和纳米表面工程技术在蒸发器等换热设备的防垢和沸腾传热强化方面的研究进展进行了综述。分析了采用磁控溅射、离子注入、化学复合镀、分子自组装等表面工程技术制得的低能表面,包括纳米涂层传热表面的防垢或强化沸腾传热的功效。认为应用表面工程技术的难点在于如何制备既能防垢又能强化沸腾传热的优良传热表面;高黏物系的污垢形成规律和表面抗垢机理研究,应用纳米表面工程技术进行防垢和强化沸腾传热研究是今后的重要研究方向。     

汽液固三相流化床沸腾传热的研究

对垂直管内汽液固三相流化床沸腾传热特性进行了实验研究和理论分析,建立了沸腾传热的计算方法.实验结果表明,由于固体粒子的存在,强化了沸腾传热.传热系数比汽液两相流提高2倍左右.沸腾过程的稳定性明显提高.     

三相循环流化床蒸发器防除垢机理

引　言结垢是蒸发器加热壁面上经常遇到的问题 .垢层严重地降低了换热效率 ,使传热过程迅速恶化 ,蒸发器的防、除垢问题受到人们的普遍重视 .张利斌、李修伦等[1] 研究了汽液固三相循环流化床蒸发器沸腾传热和防、除垢性能 ,本文进一步考察该蒸发器的防、除垢机理 ,并对其进行了分析 .1　汽液固三相流剪应力“混相流”模型根据文献 [1],蒸发管内的汽液固三相流动呈现“混相流”的特性 ,因此为便于分析及突出问题的基本特征 ,假设 :(1)温度场引起的物性变化忽略不计 ;(2 )蒸发管内的汽液两相流动视为均相流动 ,蒸汽的惟一效果是改变了“流体…     

垂直管内三相流化床沸腾传热特性

研究了三相流化床沸腾传热的特性和影响传热系数的诸因素。在传热过程中，由于固体粒子的存在，强化了传热。以玻璃球粒子为固相的三相流化床沸腾传热系数，是相同条件下汽液两相流沸腾传热的二倍。以铜粒子为固相的三相流化床沸腾传热系数，是相同条件下汽液两相流沸腾传热系数的３倍。     

管内丝网强化传热及防垢技术研究与应用

介绍了1种通过在换热管内设置可往复运动的丝网来强化传热及防垢的技术方法.以某汽一水换热器为应用对象,试验研究了换热管尺寸为φ25 mm×2.5 mm,管内丝网钢丝直径分别为0.5、0.8、1.0 mm及不同钢丝间距时换热管的传热和阻力性能.试验结果表明,丝网钢丝直径为1.0 mm、钢丝间距为28mm时换热性能最佳.将该丝网应用于汽-水换热器的更新改造,并对改造前后设备的性能参数进行了对比,工业应用结果表明,采用该技术后,可减少设备换热面积约48%,且具有良好的防垢作用.     

三相循环流化床中沸腾传热特性

提出了一种新型蒸发沸腾传热方式,即汽液固三相循环流化床沸腾传热。实验表明:该传热方式具有强化传热和防、除垢效果;其传热系数比汽液两相流沸腾传热膜系数高1.5～2.0倍,并能长期保持传热壁面的洁净。实验中研究了不同种类的固体粒子(玻璃球、陶瓷球、钛粒和钢球)、粒子体积分率、液相流速以及加热蒸汽压力等因素对循环流化床沸腾传热的影响。     

超声波技术在强化传热及防垢除垢技术中应用进展

结合当前有关超声波强化传热及除垢防垢的研究形势,介绍了超声波强化传热及防垢除垢的技术研究成果,全面阐述了该技术在强化传热及防垢除垢方面的原理及进展,并就该技术的应用前景与研究方向进行了分析和展望。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。