烷基糖苷的直接苷化法研究

采用直接苷化法合成了十二烷基葡糖苷。通过正交试验,考察了原料配比、催化剂用量和反应温度等因素对产率的影响。得到了最佳反应条件：十二醇与葡萄糖的摩尔比为3．0：1,催化剂与葡萄糖的质量比为0．01：1,反应温度为120℃。结果表明：影响产率的主要因素为催化剂和葡萄糖的配料比。     

转糖苷法合成烷基糖苷的合成工艺研究

本文采用无水葡萄糖、乙二醇和十二烷醇为原料,经两步转糖苷法制备烷基糖苷。采用正交法设计实验,以烷基糖苷产率为考察指标,考察了反应温度、反应时间、醇糖比以及催化剂用量对合成烷基糖苷产率的影响,计算出十二烷基糖苷产品的产率与各因素间的关系,得到最佳实验条件：葡萄糖与乙二醇用量比为1：7,葡萄糖与十二醇用量比为1：8,催化剂用量为葡萄糖量的2.6%,反应温度为120℃,反应时间为4.5 h。     

影响十二烷基多糖苷的合成因素研究

采用交换法合成十二烷基葡萄糖苷,考察了催化剂、醇糖比、反应时间、反应温度及脱醇工艺等对反应结果的影响。结果表明,优惠工艺条件是:反应温度为110℃左右催化剂/葡萄糖摩尔比为0 01∶1、正丁醇/葡萄糖摩尔比为5∶1、十二醇/葡萄糖摩尔比为6∶1的条件下反应,经柱层析去除残留正十二醇,十二烷基多糖甙收率为85 5%,并测定了产品的表面张力和起泡性能。     

直接苷化法合成烷基糖苷的研究

叙述了以月桂醇、葡萄糖为原料,采用复合催化剂利用直接苷化法合成十二烷基葡萄糖苷,探讨了其名主要影响因素,得出适宜的反应条件为：反应压力为４．０５ｋＰａ;反应温度为１２０℃;醇糖比为５：１,剂糖比为０．００８：１。     

直接苷化法合成烷基糖苷的研究

本文以月桂醇、葡萄糖为原料,采用复合催化剂利用直接苷化法合成了十二烷基葡萄苷,探讨了其各主要影响因素,得出适宜的反应条件下为：反应压力为４．０５ＫＰａ反应温度为１２０℃,醇糖比为５：１;剂糖比为０．００８：１。     

固体酸催化合成C12-14烷基糖苷及性能测定

本文以葡萄糖和工业混合醇为原料,自制固体酸为催化剂,采用一步法合成烷基糖苷。通过单因素实验方法,讨论了反应温度、催化剂用量、反应物配比、加料方式对合成的影响,得出适宜的合成条件为:反应温度115～120℃,催化剂与葡萄糖质量比为0.015∶1;混合醇与葡萄糖物质的量比为5∶1,采用分批加料的方式。并对产物进行了红外表征及表(界)面性能测定。     

一步法合成十二烷基葡萄糖苷反应过程研究

以正十二醇和葡萄糖为原料一步法制备十二烷基葡萄糖苷,研究了不同反应条件(催化体系、催化剂用量、温度、醇糖比等)对反应过程转化率和选择性的影响,提出了此反应过程的物理模型。研究结果表明,合成十二烷基葡萄糖苷的反应主要由生成十二烷基葡萄糖苷的主反应和生成多糖的副反应组成。十二醇与葡萄糖反应生成烷基葡萄糖苷的主反应属于液相反应机理,首先葡萄糖溶解于十二醇中,然后与十二醇发生均相反应,碳正离子与十二醇的反应是整个反应的控制步骤。反应过程中,反应体系中部分固相葡萄糖处于熔融状态,能捕捉液相中的催化剂,生成多糖副产物。不同反应条件下的实验结果表明,此反应机理能很好地描述反应过程,为此反应过程的动力学研究提供了理论基础。     

烷基葡萄糖苷的合成研究

烷基葡萄糖苷的合成分为两步，首先正丁醇和葡萄糖反应生成丁基葡萄糖苷，最佳反应条件为醇糖摩尔比为４：１，反应温度１１０℃，反应时间３小时，催化剂为对甲基苯磺酸，第二步使用十二醇进行酯交换，产品收率以及葡萄糖计８７％。     

期刊文献

<正>一步法合成十二烷基葡萄糖苷反应过程研究张永昭,计建炳,艾宁摘要:以正十二醇和葡萄糖为原料一步法制备十二烷基葡萄糖苷,研究了不同反应条件(催化体系、催化剂用量、温度、醇糖比等)对反应过程转化率和选择性的影响,提出了此反应过程的物理模型。研究结果表明,合成十二烷基葡萄糖苷的反应主要由生成十二烷基葡萄糖苷的主反应和生成多糖的副反应组成。十二醇与葡萄糖反应生成烷基葡萄糖苷的主反应属于液相反     

直接苷化一步法合成十二烷基葡萄糖苷

报道了以葡萄糖和十二醇为原料直接苷化一步法合成十二烷基葡萄糖苷的生产工艺，对其影响因素和动力学模型进行了讨论，并确定了最佳反应条件：醇糖物质的量比为3－5，反应温度为110－130℃，反应压力4kPa，反应时间3－5h。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。