Scaffolds of poly (ε-caprolactone) with whiskers of hydroxyapatite

Scaffolds of Poly (ε-caprolactone)/hydroxyapatite were produced and studied for tissue engineering applications. The materials were selected due to its biodegradability (PCL) and bioactivity (HA), and above all their biocompatibility toward the human tissue. The composites produced were characterized by SEM, XRD, and EDS. By analyzing these characterizations it was possible to obtain further information about the composition and morphology aspects of all portions of the composite scaffold.     

Electrophoretic deposition of silicon-substituted hydroxyapatite/poly(ε-caprolactone) composite coatings

Silicon-substituted hydroxyapatite/poly(ε-caprolactone) composite coatings were prepared on titanium substrate by electrophoretic deposition in n-butanol and chloroform mixture. The effect of the concentration of poly(ε-caprolactone) in suspension on the morphology and the microstructure of coatings were investigated, furthermore, the thermal behavior and in vitro bioactivity were also investigated. The results show that the coarse and accidented silicon-substituted hydroxyapatite/poly(ε-caprolactone) composite coatings were obtained by electrophoretic deposition when the concentration of poly(ε-caprolactone) in suspension was 6–16 g/l. The adsorption of poly(ε-caprolactone) on the surface of Si–HA particles hinders the electrophoretic deposition of Si–HA. The shear-testing experiments indicated that the addition of poly(ε-caprolactone) in suspension is in favor of improving the bonding strength of the coatings. After immersion in simulated body fluid for 8 days, silicon-substituted hydroxyapatite/poly(ε-caprolactone) composite coatings have the ability to induce the bone-like apatite formation.     

Fabrication and characterization of injection molded poly (ε-caprolactone) and poly (ε-caprolactone)/hydroxyapatite scaffolds for tissue engineering

In this study, poly(ε-caprolactone) (PCL)/sodium chloride (NaCl), PCL/poly(ethylene oxide) (PEO)/NaCl and PCL/PEO/NaCl/hydroxyapatite (HA) composites were injection molded and characterized. The water soluble and sacrificial polymer, PEO, and NaCl particulates in the composites were leached by deionized water to produce porous and interconnected microstructures. The effect of leaching time on porosity, and residual contents of NaCl and NaCl/HA, as well as the effect of HA addition on mechanical properties was investigated. In addition, the biocompatibility was observed via seeding human mesenchymal stem cells (hMSCs) on PCL and PCL/HA scaffolds.The results showed that the leaching time depends on the spatial distribution of sacrificial PEO phase and NaCl particulates. The addition of HA has significantly improved the elastic (E′) and loss moduli (E″) of PCL/HA scaffolds. Human MSCs were observed to have attached and proliferated on both PCL and PCL/HA scaffolds. Taken together, the molded PCL and PCL/HA scaffolds could be good candidates as tissue engineering scaffolds. Additionally, injection molding would be a potential and high throughput technology to fabricate tissue scaffolds.     

Electrospun fibrous web of collagen–apatite precipitated nanocomposite for bone regeneration

Electrospinning is regarded as a facile tool to generate biomaterials into a nanofibrous structure. Herein a nanofibrous web constituted of collagen and hydroxyapatite (HA) was produced from their co-precipitated nanocomposite solution by using the electrospinning method. The co-precipitated sol was freeze-dried and the dried product was dissolved in an organic solvent for the electrospinning. The electrospun web showed a well-developed nanofibrous structure with HA contents of up to 20 wt%. The internal structure of the collagen-20 wt%HA nanofiber revealed highly elongated apatite nanocrystallines precipitated within the collagen matrix. However, above the HA content of 30 wt% the nanofibrous structure could not be preserved due to the formation of beads. The MC3T3-E1 osteoblastic cells were shown to adhere and grow actively on the collagen-HA nanofibrous web. The alkaline phosphatase (ALP) activity expressed by the cells on the collagen-20 wt%HA nanofiber was lower at day 7, but was higher at day 14 than that on the pure collagen nanofiber. Based on the study, the newly-developed collagen-HA nanofiber may be useful as a cell supporting substrate in bone regeneration area.     

Electrospun nanofibers composed of poly(ε-caprolactone) and polyethylenimine for tissue engineering applications

Poly(ε-caprolactone) (PCL) electrospun nanofibers have been reported as a scaffold for tissue engineering application. However, high hydrophobicity of PCL limits use of functional scaffold. In this study, PCL/polyethylenimine (PEI) blend electrospun nanofibers were prepared to overcome the limitation of PCL ones because the PEI as a cationic polymer can increase cell adhesion and can improve the electrospinnability of PCL. The structure, mechanical properties and biological activity of the PCL/PEI electrospun nanofibers were studied. The diameters of the PCL/PEI nanofibers ranged from 150.4 ± 33 to 220.4 ± 32 nm. The PCL/PEI nanofibers showed suitable mechanical properties with adequate porosity and increased hydrophilic behavior. The cell adhesion and cell proliferation of PCL nanofibers were increased by blending with PEI due to the hydrophilic properties of PEI.     

Assessment of bone regeneration of a tissue-engineered bone complex using human dental pulp stem cells/poly(ε-caprolactone)-biphasic calcium phosphate scaffold constructs in rabbit calvarial defects

The objective of the present study was to investigate the effect of a fabricated combination of poly-?-caprolactone (PCL)–biphasic calcium phosphate (BCP) with the modified melt stretching and multilayer deposition (mMSMD) technique on human dental pulp stem cell (hDPSC) differentiation to be osteogenic like cells for bone regeneration of calvarial defects in rabbit models. hDPSCs extracted from human third molars were seeded onto mMSMD PCL-BCP scaffolds and the osteogenic gene expression was tested prior to implantation in vivo. Two standardized 11?mm in diameter circular calvarial defects were created in 18 adult male New Zealand white rabbits. The rabbits were divided into 4 groups: (1) hDPSCs seeded in mMSMD PCL-BCP scaffolds; (2) mMSMD PCL-BCP scaffolds alone, (3) empty defects and (4) autogenous bone (n?=?3 site/time point/groups). After two, four and eight weeks after the operation, the specimens were harvested for micro-CT including histological and histomorphometric analysis. The explicit results presented an interesting view of the bioengineered constructs of hDPSCs in PCL-BCP scaffolds that increased the newly formed bone compared to the empty defect and scaffold alone groups. The results demonstrated that hDPSCs combined with mMSMD PCL-BCP scaffolds may be an augmentation material for bony defect.     

Synthesis of poly(ε-caprolactone)/hydroxyapatite nanocomposites using in-situ co-precipitation

Hybrid poly(ε-caprolactone) (PCL)/hydroxyapatite(HA) nanocomposites with various HA contents (0, 10, 20, 30 wt.%) were synthesized using an in-situ co-precipitation method. All nanocomposites prepared contained elongated HA nanocrystals dispersed uniformly in the PCL matrix without severe agglomeration. The tensile strength decreased from 13.5 ± 0.4 to 10.2 ± 0.3 MPa with increasing the HA content from 0 to 30 wt.%, whereas the elastic modulus increased from 85 ± 4.2 to 183 ± 6.6 MPa. In addition, the ALP activity was increased remarkably due to the presence of bioactive HA nanocrystals within the composites. The nanocomposite containing 30 wt.% HA showed a higher elastic modulus and ALP activity than the conventional PCL/HA composite with an initial HA content of 30 wt.%. This was attributed to the nanoscale hybridization of the HA nanocrystals without significant agglomeration.     

Synthesis of aligned porous poly(ε-caprolactone) (PCL)/hydroxyapatite (HA) composite microspheres

We synthesized poly(ε-caprolactone) (PCL)/hydroxyapatite (HA) composite microspheres with an aligned porous structure and evaluated their potential applications in bone tissue engineering. A range of HA particles (0, 5, 10 and 20 wt.% in relation to the PCL polymer) were added to a PCL solution in order to improve the biocompatibility of the porous PCL/HA composite microspheres. All the synthesized microspheres showed that the HA particles were distributed well in the PCL matrix, while preserving their aligned porous structure. The average size of the PCL/HA composite microspheres increased from 62 ± 7 to 179 ± 95 μm with increasing HA content from 0 to 20 wt.%. The incorporation of the HA particles to the PCL polymer led to a considerable improvement in in vitro bioactivity, which was assessed by immersing the PCL/HA composite microspheres in simulated body fluid (SBF). A number of apatite crystals could be precipitated on the surface of the aligned porous PCL/HA composite microspheres after soaking in the SBF for 7 days.     

Silk fibroin modified porous poly(ε-caprolactone) scaffold for human fibroblast culture in vitro

In order to develop scaffolds with improved biocompatibility for cell culture, hybrid scaffolds were fabricated by modifying poly(epsilon-caprolactone) (PCL) with silk fibroin (SF) in a porous structure. Scanning electronic microscopy revealed that the morphology of the PCL-SF hybrid scaffold was affected by the concentration of the SF solution. Availability of SF on the surface and the conformational transition induced by methanol treatment were proved by attenuated total reflection Fourier transformed infrared spectroscopy (ATR-FTIR), and wettability of the hybrid scaffold was greatly improved. To evaluate scaffold biocompatibility, human fibroblasts were cultured on the hybrid scaffold with the unmodified PCL scaffold as control. An MTT assay indicated that although fewer cells were initially held on the hybrid scaffold after one day of culture, comparable cell numbers were achieved after four days and significantly more cells proliferated on the hybrid after seven days. The cell morphology also indicated that the PCL-SF hybrid scaffold was favorable for cell culture. This study suggests that surface modification with SF would be an effective way to improve the biocompatibility of PCL, facilitating its application in practical tissue engineering.     

Fabrication of chitosan/poly(ε-caprolactone) composite hydrogels for tissue engineering applications

The aim of this study was to fabricate three-dimensional (3D) porous chitosan/poly(ε-caprolactone) (PCL) hydrogels with improved mechanical properties for tissue engineering applications. A modified emulsion lyophilisation technique was developed to produce 3D chitosan/PCL hydrogels. The addition of 25 and 50 wt% of PCL into chitosan substantially enhanced the compressive strength of composite hydrogel 160 and 290%, respectively, compared to pure chitosan hydrogel. The result of ATR–FTIR imaging corroborated that PCL and chitosan were well mixed and physically co-existed in the composite structures. The composite hydrogels were constructed of homogenous structure with average pore size of 59.7 ± 14 μm and finer pores with average size of 4.4 ± 2 μm on the wall of these larger pores. The SEM and confocal laser scanning microscopy images confirmed that fibroblast cells were attached and proliferated on the 3D structure of these composite hydrogels. The composite hydrogels acquired in this study possessed homogeneous porous structure with improved mechanical strength and integrity. They may have a high potential for the production of 3D hydrogels for tissue engineering applications.     

Synthesis, characterization and osteoconductivity properties of bone fillers based on alendronate-loaded poly(ε-caprolactone)/hydroxyapatite microspheres

A superior drug controlled release system capable of achieving efficient osteogenesis is in imperative demand because of limited bone substitute tissue for the treatment of bone defect. In the present study, we investigated the potential of using poly(ε-caprolactone)–hydroxyapatite (PCL–HA) composite microspheres as an injectable bone repair vehicle by controlled release of alendronate (AL), a medicine that belongs to the bisphosphonates family. The PCL/HA–AL microspheres were prepared with solid/oil/water emulsion technique, which included two processes: (1) AL was loaded on the hydroxyapatite nanoparticles; (2) the HA–AL complex was built in the PCL matrix. The spherical PCL/HA–AL microspheres were characterized with its significantly improved encapsulation efficiency of hydrophilic AL and better sustained release. Human bone mesenchymal stem cells (hMSCs) were cultured on the surface of these microspheres and exhibited high proliferative profile. Specifically, in osteogenic medium, hMSCs on the surface of PCL/HA–AL microspheres displayed superior osteogenic differentiation which was verified by alkaline phosphatase activity assay. In conclusion, by presenting strong osteogenic commitment of hMSCs in vitro, the PCL/HA–AL microspheres have the potential to be used as an injectable vehicle for local therapy of bone defect.     

Biodegradation trend of poly(ε-caprolactone) and nanocomposites

PCL nanocomposites based on two organically modified montmorillonites at 5% clay loading were biodegraded in a mature compost. All samples showed an effective degradation in compost but nanoclays were found to partially delay the process. Biodegradation carried out by microorganisms isolated from the compost showed that the bacterium Bacillus licheniformis was able to degrade the studied systems without considerable differences in the polymer degradation trend due to the presence of nanoclays.     

Tissue engineering scaffolds of mesoporous magnesium silicate and poly(ε-caprolactone)–poly(ethylene glycol)–poly(ε-caprolactone) composite

Mesoporous magnesium silicate (m-MS) and poly(ε-caprolactone)–poly(ethylene glycol)–poly(ε-caprolactone) (PCL–PEG–PCL) composite scaffolds were fabricated by solvent-casting and particulate leaching method. The results suggested that the incorporation of m-MS into PCL–PEG–PCL could significantly improve the water adsorption of the m-MS/PCL–PEG–PCL composite (m-MPC) scaffolds. The in vitro degradation behavior of m-MPC scaffolds were determined by testing weight loss of the scaffolds after soaking into phosphate buffered saline (PBS), and the result showed that the degradation of m-MPC scaffolds was obviously enhanced by addition of m-MS into PCL–PEG–PCL after soaking for 10 weeks. Proliferation of MG63 cells on m-MPC was significantly higher than MPC scaffolds at 4 and 7 days. ALP activity on the m-MPC was obviously higher than MPC scaffolds at 7 days, revealing that m-MPC could promote cell differentiation. Histological evaluation showed that the introduction of m-MS into PCL–PEG–PCL enhanced the efficiency of new bone formation when the m-MPC scaffolds implanted into bone defect of rabbits. The results suggested that the inorganic/organic composite of m-MS and PCL–PEG–PCL scaffolds exhibited good biocompatibility, degradability and osteogenesis.     

Non-conventional injection molding of poly(lactide) and poly(ε-caprolactone) intended for orthopedic applications

Biodegradable polymers such as poly(lactide) (PLA) and poly(epsilon-caprolactone) (PCL) are increasingly used in biomedical applications as temporary implants. However, melt processing of these materials in particular of PLA is difficult due to the temperature sensitivity. Within this study, PLA and PCL were injection molded conventionally and by using the process shear controled orientation in injection molding (SCORIM) in order to investigate the effect of processing parameters on the physical properties of the moldings. Therefore, flexural testing, differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD), molecular weight (MW) and orientation measurements were performed. PLA showed high sensitivity to melt temperature. In the case of amorphous poly(DL-lactide), the molecular weight and subsequently the ductility is substantially reduced by processing at higher melt temperatures. In the case of crystallizable poly(L-lactide), higher melt temperatures and shear induced by the SCORIM process resulted in enhanced crystallinity, which compromised the mechanical properties. Generally, SCORIM processing improved the mechanical properties, in particular the ductility, by orientating the molecular structure. PCL was shown to be less sensitive to shear and temperature than PLA. Stress at yield and stiffness are more improved by SCORIM processing. However, the processing temperature in combination with the grade used proved to be influential for the mechanical properties of resulting moldings.     

Macrochanneled poly (ɛ-caprolactone)/ hydroxyapatite scaffold by combination of bi-axial machining and lamination

A combination of bi-axial machining and lamination was used to fabricate macrochanneled poly (ɛ-caprolactone) (PCL)/hydroxyapatite (HA) scaffolds. Thermoplastic PCL/HA sheets with a thickness of 1 mm, consisting of a 40 wt% PCL polymer and 60 wt% HA particles, were bi-axially machined. The thermoplastic PCL/HA exhibited an excellent surface finish with negligible tearing of the PCL polymer and pull-out of the HA particles. The bi-axially machined sheets were laminated with a solvent to give permanent bonding between the lamina. This novel process produced three-directionally connected macrochannels in the dense PCL/HA body. The macrochanneled PCL/HA scaffold exhibited excellent ductility and reasonably high strength. In addition, good cellular responses were observed due to the osteoconductive HA particles.     

Thermal behaviour of poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) tri-block copolymers

Thermal behavior of poly(-caprolactone)-poly(ethylene glycol)-poly(-caprolactone) tri-block copolymers with different block lengths is examined. Thermal behavior of specimens crystallized under the isothermal and dynamic condition are characterized by DSC. Also WAXD and SAXS are employed to investigate the structure. Depending on the relative length of each block, tri-block copolymers can be classified into three groups: PCL dominant crystallization; PEG dominant crystallization; and the competing case. When the crystallization of PEG and PCL are competing, the crystallization of each block shows strong dependency on the thermal hystory of crystallization, leading to multiple melting and crystallization peaks. Also, the typical micro-phase separation of block copolymers seems to play an important role, competing with crystallization, especially under the dynamic crystallization condition.     

Direct coating of bioactive sol-gel derived silica on poly(ε-caprolactone) nanofibrous scaffold using co-electrospinning

This study reports a novel way of directly coating a poly(ε-caprolactone) (PCL) nanofibrous scaffold with bioactive sol-gel derived silica by directly co-electrospinning (Co-ES) a PCL solution and silica sol, used as the core and shell materials, respectively. In particular, the silica sols prepared using a sol-gel process at room temperature were heat-treated at 60 °C for various times, ranging from 0 to 9 h, in order to improve their spinability. The surface of the individual PCL nanofibers could be covered completely with a bioactive silica layer using a silica sol heat-treated at 60 °C for more than 6 h, whilst preserving the nanofibrous structure. Fourier-transform infrared spectroscopy (FT-IR) revealed only the characteristic bands associated with the PCL and sol-gel derived silica materials without any noticeable band shift.     

Osteogenic differentiation of rat bone mesenchymal stem cells cultured on poly (hydroxybutyrate-co-hydroxyvalerate), poly (ε-caprolactone) scaffolds

Journal of Materials Science: Materials in Medicine - A thin endocrown restoration was often applied in endodontically treated teeth with vertical bite height loss or inadequate clinical crown...     

Preparation and characterization of magnetic poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) microspheres

In this article, nano-magnetite particles (ferrofluid, Fe₃O₄) were prepared by chemical co-deposition method. A series of biodegradable triblock poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) (PCL-PEG-PCL, PCEC) copolymers were synthesized by ring-opening polymerization method from ε-caprolactone (ε-CL) initiated by poly(ethylene glycol) diol (PEG) using stannous octoate as catalyst. And the magnetic PCEC composite microspheres were prepared by solvent diffusion method. The properties of the ferrofluid, PCEC copolymer, and magnetic PCEC microspheres were studied in detail by SEM, VSM, XRD, Malvern Laser Particle Sizer, ¹H-NMR, GPC, and TG/DTG. Effects of macromolecular weight and concentration of polymer, and the time for ultrasound dispersion on properties of magnetic microspheres were also investigated. The obtained magnetic PCEC microspheres might have great potential application in targeted drug delivery system or cell separation. This work was financially supported by Chinese Key Basic Research Program (2004CB518800 and 2004CB518807), and Sichuan Key Project of Science and Technology (06(05SG022-021-02)). Qian ZY and Wang H did the even work with Gou ML, and are the co-first authors for this paper.