Synthesis of flower-like CuS nanostructured microspheres using poly(ethylene glycol) 200 as solvent

CuS flower-like microspheres with the diameter of about 3-4 microm constructed by nanoflakes with thickness of about 30-40 nm have been successfully synthesized by a simple wet chemical method. In this reaction system, Poly(ethylene glycol) 200 (PEG 200) was used as solvent, CuCl2 2H2O as cuprum source, and thioacetamide (TAA) as sulfur source. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM) in detail. The XRD patterns revealed that the products were pure hexagonal phase of CuS. Experiments with various parameters indicated that the reaction temperature and molar ratio of CuCl2 2H2O to thioacetamide had strong effects on the sizes and morphologies of CuS crystals. A possible growth mechanism on the formation of CuS microspheres was proposed. The PEG 200 acted as solvent, complexing agent, and soft template in this synthesis. Furthermore, optical studies of the products including UV-Vis absorption spectrum and photoluminescence spectrum have also been carried out.     

Mesoporous nanocrystalline ZnO microspheres by ethylene glycol mediated thermal decomposition

Zinc oxide (ZnO) nanostructures with various morphologies have been fabricated in literature owing to their potential applications in various emerging fields. In this study, we report a facile, one-step gram-scale synthesis of nanocrystalline mesoporous ZnO microspheres by thermal decomposition of zinc acetate dihydrate in ethylene glycol at 250?°C for 12?h. The average size of the hollow microspheres is found to be 3.01?±?0.52?µm, which are formed by loosely bonded nanocrystallites with average sizes of 17?±?4?nm. We propose a formation mechanism for the mesoporous microspheres, Ostwald ripening of spherical-like nanocrystallites, on the basis of the results obtained by different synthesis durations. We also report the possibility of tuning the morphologies of the obtained ZnO by simply modifying the thermal decomposition solution, where porous ZnO nanoplates are obtained when a mixture of ethylene glycol and water is used and ZnO nanorods with aspect ratios of ～3 are synthesized by using diethylene glycol. ZnO nanowires with lengths up to several microns are fabricated when no solvent is used, i.e. thermal decomposition in air atmosphere. Microstructural and phase characterizations of the samples are conducted by using a field-emission gun scanning electron microscope and X-ray diffractometer. Performances of the obtained nanocrystalline mesoporous ZnO microspheres in photocatalytic degradation of Rhodamine B and as active anode materials in lithium-ion batteries are also presented.     

pH dependent hydrolysis and drug release behavior of chitosan/poly(ethylene glycol) polymer network microspheres

Semi-interpenetrating polymer network (IPN) microspheres of chitosan and poly(ethylene glycol) PEG were prepared for controlled release of drugs. A new method for the chemical crosslinking of chitosan microspheres containing isoniazid (INH) as a model drug is proposed and evaluated. The method consists of the exposure of microspheres to the vapor of crosslinking agent that act in gaseous phase under mild conditions. The structural analysis of the microspheres was carried out by FTIR-analysis. The swelling behavior, hydrolytic degradation, structural changes of the microspheres and loading capacity (LC) of the microspheres for INH were investigated. The prepared microspheres have shown 93% drug loading capacity, which suggested that these semi-IPN microspheres are suitable for controlled release of drugs in an oral sustained delivery system. © 2001 Kluwer Academic Publishers     

多糖介质中分散聚合法合成P(PEGDA)凝胶微球

以聚乙二醇双丙烯酸酯(PEGDA)为单体,过硫酸铵(APS)为引发剂,N,N'-亚甲基双丙烯酰胺(BIS)为交联剂,聚乙烯吡咯烷酮(PVP)为分散剂,在一定比例的壳聚糖多糖介质中,用分散聚合法制备P(PEGDA)凝胶微球.采用傅立叶红外光谱仪及扫描电镜对微球成分和形貌进行了表征,并研究了反应时间、反应温度、KCl用量和...     

Encapsulation of curcumin within poly(amidoamine) dendrimers for delivery to cancer cells

Curcumin has anti-proliferative and pro-apototic properties against a variety of cancer cells in vitro. Unfortunately, the water-insolubility and instability leads to its low bioavailability in vivo tests. Here, we report a general approach to using poly(amidoamine) dendrimer with acetyl terminal groups to encapsulate curcumin(G₅-Ac/Cur) for drug delivery to cancer cells. The solubility, release kinetics, anticancer activity, and apoptotic-related protein expression (Bax and Bcl-2) were investigated in detail. Comparing with curcumin, the water-solubility value of G₅-Ac/Cur increased 200-fold, and the release of curcumin from the complexes was in a sustained manner. G₅-Ac/Cur showed higher anti-proliferative activity against A549 cell lines and had the better effect on the generation of intracellular reactive oxygen species, the mitochondrial membrane potential and cell apoptosis. Furthermore, the ratio of Bax/Bcl-2 was higher in samples treated with G₅-Ac/Cur. The results indicated that the G₅-Ac drug delivery system could improve the solubility and anti-cancer effect of curcumin.     

Surface modification of poly(ethylene terephthalate) by plasma polymerization of poly(ethylene glycol)

Poly(ethylene glycol) (PEG) was ‘polymerized’ onto poly(ethylene terephthalate) (PET) surface by radio frequency (RF) plasma polymerization of PEG (average molecular weight 200 Da) at a monomer vapour partial pressure of 10 Pa. Thin films strongly adherent onto PET could be produced by this method. The modified surface was characterized by infra red (IR) spectroscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), cross-cut test, contact angle measurements and static platelet adhesion studies. The modified surface, believed to be extensively cross-linked, however showed all the chemical characteristics of PEG. The surface was found to be highly hydrophilic as evidenced by an interfacial free energy of about 0.7 dynes/cm. AFM studies showed that the surface of the modified PET became smooth by the plasma polymerized deposition. Static platelet adhesion studies using platelet rich plasma (PRP) showed considerably reduced adhesion of platelets onto the modified surface by SEM. Plasma ‘polymerization’ of a polymer such as PEG onto substrates may be a novel and interesting strategy to prepare PEG-like surfaces on a variety of substrates since the technique allows the formation of thin, pin-hole free, strongly adherent films on a variety of substrates.     

Electrodeposition of amine-terminatedpoly(ethylene glycol) to titanium surface

The immobilization of poly(ethylene glycol), PEG, to a solid surface is useful to functionalize the surface, e.g., to prevent the adsorption of proteins. No successful one-stage technique for the immobilization of PEG to base metals has ever been developed. In this study, PEG in which both terminals or one terminal had been modified with amine bases was immobilized onto a titanium surface using electrodeposition. PEG was dissolved in a NaCl solution, and electrodeposition was carried out at 310 K with − 5 V for 300 min. The thickness of the deposited PEG layer was evaluated using ellipsometry, and the bonding manner of PEG to the titanium surface was characterized using X-ray photoelectron spectroscopy after electrodeposition. The results indicated that a certain amount of PEG was adsorbed on titanium through both electrodeposition and immersion when PEG was terminated by amine. However, terminated amines existed at the surface of titanium and were combined with titanium oxide as N–HO by electrodeposition, while amines randomly existed in the molecule and showed an ionic bond with titanium oxide by immersion. The electrodeposition of PEG was effective for the inhibition of albumin adsorption. This process is useful for materials that have electroconductivity and a complex morphology.     

Poly(ethylene glycol) enhanced dehydrochlorination of poly(vinyl chloride)

Poly(ethylene glycol) (PEG), an environment-friendly reaction medium, has been adopted to accelerate the dehydrochlorination of poly(vinyl chloride) (PVC). Experimental results demonstrated that at 210 degrees C for 1h the dechlorination degree was as high as 74.2% for PVC/PEG, while for PVC only 50.0%. Moreover, from thermogravimetric analysis, it was found that for PVC/PEG the decomposition of PVC corresponding to the dehydrochlorination stage shifted to lower temperatures compared with that of pure PVC, suggesting some interactions exist between PEG and PVC that caused the faster dehydrochlorination rate. In addition, during this process, no waste byproducts such as KCl have been produced, and satisfactory recyclability of PEG (10 cycles) has been obtained.     

Protein Adhesion at Poly(ethylene glycol) Modified Surfaces

The inhibition of protein adsorption to the surfaces of biomedical devices is a crucial requirement for avoiding implant‐associated infections or thrombus formation on blood‐contacting artificial surfaces and thus for increasing the long‐term biocompatibility of the devices. Here, the use of surface plasmon resonance and scanning force microscopy using protein‐modified tips (see figure) to study protein adhesion on poly(ethylene glycol) (PEG) grafted polymer materials is discussed. The PEG‐rafted materials are revealed to have significantly reduced affinity to proteins.     

Electron-beam-initiated polymerization of poly(ethylene glycol)-based wood impregnants

The current study demonstrates that methacrylate and acrylate poly(ethylene glycol) (PEG) functional oligomers can be effectively impregnated into wood blocks, and cured efficiently to high conversions without catalyst by e-beam radiation, allowing for less susceptibility to leaching, and favorable properties including higher Brinell hardness values. PEG based monomers were chosen because there is a long history of this water-soluble monomer being able to penetrate the cell wall, thus bulking it and decreasing the uptake of water which further protects the wood from fungal attack. Diacrylate, dimethacrylate, and dihydroxyl functional PEG of M(w) 550-575, of concentrations 0, 30, 60, and 100 wt % in water, were vacuum pressure impregnated into Scots Pine blocks of 15 × 25 × 50 mm in an effort to bulk the cell wall. The samples were then irradiated and compared with nonirradiated samples. It was shown by IR, DSC that the acrylate polymers were fully cured to much higher conversions than can be reached with conventional methods. Leaching studies indicated a much lower amount of oligomer loss from the cured vinyl functional PEG chains in comparison to hydroxyl functional PEG indicating a high degree of fastening of the polymer in the wood. The Brinell hardness indicated a significant increase in hardness to hardwood levels in the modified samples compared to the samples of hydroxyl functional PEG and uncured vinyl PEG samples, which actually became softer than the untreated Scots Pine. By monitoring the dimensions of the sample it was found by weight percent gain calculations (WPG %) that water helps to swell the wood structure and allow better access of the oligomers into the cell wall. Further, the cure shrinkage of the wood samples demonstrated infiltration of the oligomers into the cell wall as this was not observed for methyl methacrylate which is well-documented to remain in the lumen. However, dimensional stability of the vinyl polymer modified blocks when placed in water was not observed to the same extent as PEG.     

聚甲撑-聚乙二醇两亲性嵌段共聚物的可控合成及自组装

采用水相同源聚合方法合成链长可控的端羟基直链聚甲撑(PM-OH),然后以异佛尔酮二异氰酸酯(IPDI)为连接剂,结合偶联反应和同源聚合反应,可控合成了一系列具有不同亲疏水嵌段长度比的聚甲撑-聚乙二醇(PM-b-PEG)嵌段共聚物.以甲苯为共溶剂,水为选择性溶剂,自组装制备球型胶束.并对合成的PM-b-PEG聚合物胶束的...     

Poly(vinyl pyridine-poly ethylene glycol methacrylate-ethylene glycol dimethacrylate) beads for heavy metal removal

Poly(vinyl pyridine-poly ethylene glycol methacrylate-ethylene glycol dimethacrylate) [poly(VP-PEGMA-EGDMA)] beads with an average size of 30–100 μm were prepared by suspension polymerization. Poly(VP-PEGMA-EGDMA) beads were characterized by swelling studies, scanning electron microscopy (SEM), elemental analysis, Fourier Transform Infrared Spectroscopy (FTIR). The beads with a swelling ratio of 65% were used for the heavy metal removal studies. Chelation capacity of the beads for the selected metal ions, i.e., Pb(II), Cd(II), Cr(III) and Cu(II) were investigated in aqueous media containing different amounts of these ions (5–80 mg/l) and at different pH values (2.0–10.0). The maximum chelation capacities of the poly(VP-PEGMA-EGDMA) beads were 18.23 mg/g for Pb(II), 16.50 mg/g for Cd(II), 17.38 mg/g for Cr(III) and 18.25 mg/g for Cu(II). The affinity order on mass basis was observed as follows: Cu(II) > Pb(II) > Cr(III) > Cd(II). pH significantly affected the chelation capacity of VP incorporated beads. Heavy metal adsorption on the poly(PEGMA-EGDMA) control microspheres was negligible. Regeneration of the chelating beads was easily performed with 0.1 M HNO₃. It was shown that these beads can be used effectively for heavy metal removal from aqueous solutions with repeatedly adsorption–desorption operations. These features show that poly(VP-PEGMA-EGDMA) beads are potential candidate sorbent for heavy metal removal.     

Synthesis of poly(ethylene glycol)-SS-poly(ε-caprolactone)-SS-poly(ethylene glycol) triblock copolymers via end-group conjugation and self-assembly for reductively responsive drug delivery

In this study, we describe a simple synthesis route to prepare triblock copolymers with disulfide-linkers, poly(ethylene glycol)-SS-poly(ε-caprolactone)-SS-poly(ethylene glycol) (PEG-SS-PCL-SS-PEG) for application in the reductively responsive release of doxorubicin (DOX). To synthesize PEG-SS-PCL-SS-PEG, two end-groups of PCL-diol were first modified with cystamine to introduce disulfide bonds and subsequently conjugated with PEG-NHS via carbodiimide chemistry. PEG-SS-PCL-SS-PEG fabricated into polymeric micelles with stable structure and different nanoscale sizes via adjusting the PCL chain length, showing obvious reductive responsiveness and fast drug release of encapsulated DOX in the presence of glutathione (GSH). Moreover, DOX-loaded PEG-SS-PCL-SS-PEG micelles exhibited higher therapeutic efficacy than reduction-insensitive PEG-b-PCL micelles in vitro. Thus, end-groups conjugation is a simple and straightforward strategy to introduce intelligent responsiveness in biocompatible block copolymers and improve their therapeutic efficacy.     

Poly(ethylene glycol) decorated poly(methylmethacrylate) nanoparticles for protein adsorption

Poly(ethylene glycol) decorated poly(methyl methacrylate) particles were synthesized by means of emulsion polymerization using poly(ethylene glycol) sorbitan monolaurate (Tween-20) as surfactant. PMMA/PEG particles presented mean diameter (195 ± 15) nm, indicating narrow size distribution. The adsorption behavior of bovine serum albumin (BSA) and concanavalin A (ConA) onto PMMA/PEG particles was investigated by means of spectrophotometry. Adsorption isotherms obtained for BSA onto PMMA/PEG particles fitted well sigmoidal function, which is typical for multilayer adsorption. Con A adsorbed irreversibly onto PMMA/PEG particles. The efficiency of ConA covered particles to induce dengue virus quick agglutination was evaluated.     

Nanostructured antifouling poly(ethylene glycol) films for silicon-based microsystems

The creation of antifouling surfaces is one of the major prerequisites for silicon-based micro-electrical-mechanical systems for biomedical and analytical applications (known as BioMEMS). Poly(ethylene glycol) (PEG), a water-soluble, nontoxic, and nonimmunogenic polymer has the unique ability to reduce nonspecific protein adsorption and cell adhesion and, therefore, is generally coupled with a wide variety of surfaces to improve their biocompatibility. To this end, we have analyzed PEG thin films of various grafting densities (i.e., number of PEG chains per unit area) coupled to silicon using a single-step PEG-silane coupling reaction scheme using variable-angle ellipsometry. Initial PEG concentration and coupling time were varied to attain different grafting densities. These data were theoretically analyzed to understand the phenomenon of PEG film formation. Furthermore, all the PEG films were evaluated for their ability to control biofouling using albumin and fibrinogen as the model proteins. PEG thin films formed by using higher PEG concentrations ( > or = 10 mM PEG) or coupling time ( > or = 1 h) demonstrated enhanced protein fouling resistance behavior. This analysis is expected to be useful to form PEG films of desired grafting density on silicon substrates for appropriate application.     

Impact compressibility of a poly(ethylene glycol)-based nanocomposite fluid

The behavior of a poly(ethylene glycol)-based nanocomposite shear thickening fluid (STF) under impact loading conditions has been experimentally studied using the Kolsky method and related techniques. The dependence of the pressure in the STF on the volume strain magnitude has been determined. It is established that the radial and axial components of the stress tensor almost coincide, which shows that the material behaves like an incompressible liquid. The character of the stress-strain curves (hysteresis) indicates that the STF is characterized by some energy dissipation in the load-unload cycle.