Degradation kinetics of anthocyanins in acerola pulp: Comparison between ohmic and conventional heat treatment

Degradation kinetics of monomeric anthocyanins in acerola pulp during thermal treatment by ohmic and conventional heating was evaluated at different temperatures (75–90 °C). Anthocyanin degradation fitted a first-order reaction model and the rate constants ranged from 5.9 to 19.7 × 10⁻³ min⁻¹. There were no significant differences between the rate constants of the ohmic and the conventional heating processes at all evaluated temperatures. D-Values ranged from 116.7 to 374.5 for ohmic heating and from 134.9 to 390.4 for conventional heating. Values of the free energy of inactivation were within the range of 100.19 and 101.35 kJ mol⁻¹. The enthalpy of activation presented values between 71.79 and 71.94 kJ mol⁻¹ and the entropy of activation ranged from −80.15 to −82.63 J mol⁻¹ K⁻¹. Both heating technologies showed activation energy of 74.8 kJ mol⁻¹ and close values for all thermodynamic parameters, indicating similar mechanisms of degradation.     

Thermal inactivation of lactoperoxidase in goat,sheep and bovine milk – A comparative kinetic and thermodynamic study

Using isothermal heating, inactivation of lactoperoxidase (LPO) in goat, sheep and cow milk was studied in the temperature range of 70–77 °C. Kinetic and thermodynamics studies were carried out at different time–temperature combination in order to evaluate the suitability of LPO as marker for the heat-treatment of milk and dairy products from different species. The thermal inactivation of LPO followed the first-order kinetics. D- and k-values decreased and increased, respectively with increasing temperature, indicating a more rapid LPO inactivation at higher temperatures. The influence of temperature on the inactivation rate constant was quantified using the Arrhenius and thermal death time models. The corresponding z-values were 3.38 ± 0.013, 4.11 ± 0.24 and 3.58 ± 0.004 °C in goat, sheep and cow milk, respectively. Activation energy values varied between milk species with 678.96 ± 21.43 kJ mol⁻¹ in goat milk, 560.87 ± 28.18 kJ mol⁻¹ in sheep milk and 641.56 ± 13.12 kJ mol⁻¹ in cow milk, respectively.     

High hydrostatic pressure protection of a pectinase cocktail against thermal inactivation

Pectinase cocktails, containing pectinases, hemicellulases, and cellulases are used in the production of commercial apple juice to reduce juice viscosity, increase yield, and to clarify the final product. The kinetics of inactivation of a commercial pectinase formulation was studied at 0.1–400 MPa and 55.0–85.0 °C. High hydrostatic pressure slowed the rate of inactivation of the pectinase cocktail treated at inactivating temperature conditions by up to 19-fold at 77.0 °C, 350 MPa compared to inactivation at atmospheric pressure at the same temperature. Apparent activation energies of enzyme inactivation at 200–400 MPa were lower (107.3–154.4 kJ mol⁻¹) than at 0.1 MPa (195.6 kJ mol⁻¹).     

Neriifolin S, a dimeric serine protease from Euphorbia neriifolia Linn.: Purification and biochemical characterisation

A dimeric serine protease Neriifolin S of molecular mass 94 kDa with milk clotting activity has been purified from the latex of Euphorbia neriifolia by anion exchange and size-exclusion chromatography. It hydrolyses peptidyl substrates l-Ala-pNA with highest affinity (K_m of 0.195 mM) and physiological efficiency (K_cat/K_m of 144.5 mM s). Enzyme belongs to the class of neutral proteases with pI value of 6.8, optimal proteolytic activity displayed at pH 9.5 and temperature 45 °C. Its proteolytic activity is strongly stimulated in the presence of Ca⁺² ions and exclusively inhibited by serine protease inhibitors. Enzyme is fairly stable toward chemical denaturants, pH and temperature. The apparent T_m, was found to be 65 °C. Thermal inactivation follow first order kinetics with activation energy (Ea), activation enthalpy (ΔH∗), free energy change (ΔG∗) and entropy (ΔS∗) of 27.54 kJ mol⁻¹, 24.89 kJ mol⁻¹, −82.34 kJ mol⁻¹ and 337.20 J mol⁻¹ K⁻¹.     

Kinetics of formation of acrylamide and Schiff base intermediates from asparagine and glucose

From the concentration of glucose and asparagine as reactants and of acrylamide as product each determined by LC–MS during reaction in an acetonitrile/water (68:32) model system at pH 7.6 (0.04 M phosphate buffer) and from the relative concentration of the Schiff base intermediate, the decarboxylated Schiff base intermediate, the Amadori product and aminopropionamide determined in the same reaction mixtures at 120 °C, 140 °C, 160 °C and 180 °C for up to 16 min, the energy of activation for formation of the Schiff base intermediate was found to have the value 50 ± 2 kJ mol⁻¹, while the apparent activation energy for formation of acrylamide was 64.4 ± 0.6 kJ mol⁻¹, for formation of the decarboxylated Schiff base intermediate 92 ± 2 kJ mol⁻¹, and for formation of the Amadori compound 59 ± 4 kJ mol⁻¹, respectively. At high temperature conditions, formation of the Schiff base is accordingly rate determining, while at lower temperatures, decarboxylation becomes rate determining. Aminopropionamide was only detected at reaction times at which acrylamide formation already is significant in favor of, a reaction path including direct formation of acrylamide from the decarboxylated Schiff base, rather than including dissociation of ammonia from aminopropionamide.     

Stability of black carrot anthocyanins in various fruit juices and nectars

Fruit juices (apple, grape, orange, grapefruit, tangerine and lemon) and nectars (apricot, peach and pineapple) were coloured with black carrot juice concentrate and stability of black carrot anthocyanins in these matrices was studied during heating at 70–90 °C and storage at 4–37 °C. Anthocyanin degradation, in all coloured juices and nectars, followed first-order reaction kinetics. During heating, black carrot anthocyanins in apple and grape juices showed higher stability than those in citrus juices at 70 and 80 °C. High stability was also obtained for the anthocyanins in peach and apricot nectars at these temperatures. Black carrot anthocyanins were the least stable in orange juice during both heating and storage. During storage, degradation of anthocyanins was very fast at 37 °C, especially in pineapple nectar. Refrigerated storage (4 °C) markedly increased the stability in all samples. Activation energies for the degradation of black carrot anthocyanins in coloured juices and nectars ranged from 42.1 to 75.8 kJ mol⁻¹ at 70–90 °C and 65.9–94.7 kJ mol⁻¹ at 4–37 °C.     

Effects of light,temperature and water activity on the kinetics of lipoxidation in almond-based products

Lipoxidation in almond-derived products was investigated using the chemiluminescence (CL) and thiobarbituric acid-reactive substances (TBARS) methods to detect the first and later reaction products, respectively. The effects of light during storage at 5 °C, 22 °C and 40 °C were studied, as well as the effects of combined heat/water activity treatments in the 60–120 °C and 0.38–0.72 range. During storage, light was found to enhance the CL and TBARS values, and specific responses were observed in almond paste and the final Calisson product. During the heating of almond paste, as the initial water activity (a_w) increased, the CL rate constants increased during heating to 60 °C and 80 °C, but interestingly, these values decreased during further heating to 120 °C, whereas the maximum TBARS rate constants occurred at a_w 0.57 at all the heating temperatures tested. The activation energies, based on the CL and TBARS values, decreased specifically when the a_w increased from 0.38 to 0.72, giving overall values ranging from110 kJ mol⁻¹ to 60 kJ mol⁻¹. Likewise, in the same water activity range, the temperature-dependent rate constant enhancing factor (Q₁₀) decreased from 3.3 to 1.6.     

Quantification and characterisation of polyphenol oxidase from vanilla bean

Polyphenol oxidase (PPO) of Vanilla planifolia Andrews beans was extracted and purified through ammonium sulphate precipitation, dialysis, and gel filtration chromatography. PPO activity was measured by improved UV technique using 4-methylcatechol and catechol as substrates increasing substantial sensitivity of previous procedure. The optimum pH and temperature for PPO activity were found to be 3.0 and 3.4 and 37 °C, respectively. K_m and V_max values were found to be 10.6 mM/L and 13.9 OD₃₀₀ min⁻¹ for 4-methylcatechol and 85 mM/L and 107.2 OD₃₀₀ min⁻¹ for catechol. In an inhibition test, the most potent inhibitor was found to be 4-hexylresorcinol followed by ascorbic acid. The thermal inactivation curve was biphasic. Activation energy (E_a) and z values were calculated as 92.10 kJ mol⁻¹ and 21 °C, respectively.     

Properties of polyphenol oxidase from Anamur banana (Musa cavendishii)

Polyphenol oxidase (PPO) was extracted from Anamur banana, grown in Turkey, and its characteristics were studied. The optimum temperature for banana PPO activity was found to be 30 °C. The pH-activity optimum was 7.0. From the thermal inactivation studies, in the range 60–75 °C, the half-life values of the enzyme ranged from 7.3 to 85.6 min. The activation energy (E_a) and Z values were calculated to be 155 kJ mol⁻¹ and 14.2 °C, respectively. K_m and V_max values were 8.5 mM and 0.754 OD₄₁₀ min⁻¹, respectively. Of the inhibitors tested, ascorbic acid and sodium metabisulphite were the most effective.     

Heating condition effects on thermal resistance of fifth-instar Amyelois transitella (Walker) (Lepidoptera: Pyralidae)

Successful development of a thermal treatment protocol depends on reliable information on fundamental thermal death kinetics of targeted insects under different heating conditions. The effects of heating rates (1, 10, and 15 °C min⁻¹), pre-treatment conditioning (30 °C+6 h), and the difference between long-term laboratory cultures and recently isolated cultures on thermal mortality of fifth-instar navel orangeworm, Amyelois transitella (Walker), were studied using a heating block system. There was no significant difference in insect mortality resulting from heating rates of 10 and 15 °C min⁻¹. Temperature control at 1 °C min⁻¹ was more uniform than for the other heating rates, resulting in reduced variability for insect mortality. The mean mortality at the heating rate of 1 °C min⁻¹ was significantly lower than for the two faster heating rates only at 48 °C+30 min. The pre-treatment conditioning of fifth-instar Amyelois transitella enhanced their thermotolerance only at certain temperature-time combinations. Fifth-instars from long-term laboratory and recently isolated cultures were equally susceptible to elevated temperatures. Therefore, thermal death kinetic information obtained from the long-term laboratory cultures can be used to develop thermal protocols against field pests.     

Thermal inactivation kinetics of Rabdosia serra (Maxim.) Hara leaf peroxidase and polyphenol oxidase and comparative evaluation of drying methods on leaf phenolic profile and bioactivities

Inactivation kinetics of peroxidase and polyphenol oxidase in fresh Rabdosia serra leaf were determined by hot water and steam blanching. Activation energy (52.30 kJ mol⁻¹) of polyphenol oxidase inactivation was higher than that (20.15 kJ mol⁻¹) of peroxidase. Water blanching at 90 °C or steam blanching at 100 °C for 90 s was recommended as the preliminary treatment for the retention of phenolics. Moreover, comparative evaluation of drying methods on the phenolics profiles and bioactivities of R. serra leaf were conducted. The results indicated that only intact leaf after freeze drying retained the initial quality. The sun- and air-dried leaves possessed identical phenolic profiles. The homogenised leaf (after freeze-drying) possessed a lower level of phenolics due to enzymatic degradation. Good antioxidant activities were detected for the sun- and air-dried leaves. There was insignificant difference in anti-tyrosinase and anti-α-glucosidase activities among sun-, air-, and freeze-dried leaves.     

Effects of temperature,solid content and pH on the stability of black carrot anthocyanins

Anthocyanin stability of black carrots was studied at various solid contents (11, 30, 45 and 64° Brix) and pHs (4.3 and 6.0) during both heating, at 70–90 °C, and storage at 4–37 °C. Monomeric anthocyanin degradation fitted a first-order reaction model. Degradation of monomeric anthocyanins increased with increasing solid content during heating, while it decreased during storage. For example, at pH 4.3, half-life periods for anthocyanins at 30, 45 and 64° Brix were, respectively, 8.4, 6.9 and 5.2 h during heating at 80 °C and 18.7, 30.8 and 35.9 weeks during storage at 20 °C. At 30–64° Brix, increasing pH from 4.3 to 6.0 enhanced the degradation of anthocyanins during heating. The effect of pH on thermal stability of anthocyanins was also studied at six different pHs (2.5–7.0) in citrate-phosphate buffer solutions and significant decrease in anthocyanin stability was observed at pHs above 5.0. Higher activation energies (E_a) were obtained during heating than during storage with increasing solid contents. At 30–64° Brix, E_a values ranged from 68.8 to 95.1 kJ mol⁻¹ during heating and from 62.1 to 86.2 kJ mol⁻¹ during storage. Q₁₀ values at 20–37 °C were as high as 3.1 at 45° Brix and 3.6 at 64° Brix.     

An activated-state model for the prediction of solid-phase crystallization growth kinetics in dried lactose particles

Molecular-level understanding of solid-phase crystallization growth kinetics has the potential to improve the fundamental basis for understanding this process. This understanding has been developed here as part of an activated-state model, which accounts for the effects of the moisture content and the temperature on the crystallization rate. Water-induced crystallization (WIC) at different temperatures (15 °C, 25 °C, 40 °C) and a constant relative humidity (75%) environment has been used to analyze the changes in enthalpy, entropy and Gibbs free energy of activation for the solid-phase crystallization of lactose. WIC showed that, at higher temperatures, crystallization commences at lower moisture contents. The enthalpy and Gibbs free energy of activation increased during the crystallization process, which suggested that the binding energy needed for the formation of an activated complex increased as the moisture content decreased, making the formation of the activated complex more difficult. The entropy of activation, on the other hand, decreased with the decrease in the moisture content. From the activated rate equation, the energy of activation has been estimated to be 39 ± 2 kJ mol⁻¹, which is similar to the literature value (40 kJ mol⁻¹) for the solid-phase crystallization of lactose. The reaction rate constant at 25 °C is 1.4 × 10⁻⁴ s⁻¹, which is similar to the literature value of 1.3 × 10⁻⁴ s⁻¹. The WLF equation is inconsistent and hence unreliable in predicting the rates of crystallization at the glass-transition temperature from the analysis of experimental data at different temperatures.     

Release kinetics of nisin from biodegradable poly(butylene adipate-co-terephthalate) films into water

The release kinetics of nisin from poly(butylene adipate-co-terephthalate) (PBAT) to distilled water was studied at of 5.6, 22 and 40 °C. The release kinetics of nisin from PBAT film was described using Fick’s second law of diffusion, partition coefficient, and Weibull model. The diffusion coefficients (D) determined were 0.93, 2.29, and 5.78 × 10⁻¹⁰ cm²/s at 5.6, 22, and 40 °C, respectively. The partition coefficients (K) calculated were 0.84, 3.89, and 5.2 × 10³ at 5.6, 22, and 40 °C, respectively. The nisin release data at selected temperatures were fitted with the Weibull model (R² > 0.97) with b and n values ranging from 0.02 to 0.98 and from 0.28 to 0.45, respectively. The temperature dependence of D, K, and Weibull model parameter b was modeled using the Arrhenius equation giving values of activation energy (E_a) of 38.3 kJ mol⁻¹ (for D), 38.5 kJ mol⁻¹ (for K), and 79.5 kJ mol⁻¹ (for b).     

Water absorption and starch gelatinization in whole rice grain during soaking

Hydration of rough rice grain in hot water as a function of time was studied at temperature range 25-90 °C. A simple model which considers simultaneous unsteady-state water diffusion and first-order irreversible water-starch reaction phenomenon, was used to evaluate the kinetics parameters from experimental curves. The values of the diffusion coefficients and reaction rate constants were between 1.40×10⁻¹¹ and 9.36×10⁻¹¹ m² s⁻¹ and 2.29×10⁻¹⁰ and 3.72×10⁻⁵ s⁻¹, respectively. Both parameters followed a Arrhenius-type equation with distinct activation energies below and above a break temperature of 60 °C. It was 25.4 and 289.3 kJ mol⁻¹ for the activation energies of diffusion and reaction, respectively, below 60 °C. Above this temperature the respective values of the activation energies of diffusion and reaction were 30.0 and 16.6 kJ mol⁻¹. This break temperature was in agreement with the gelatinization temperature determined experimentally.     

Parallel enzymatic and non-enzymatic formation of zinc protoporphyrin IX in pork

Zinc protoporphyrin is formed in pork homogenates in both enzymatic and non-enzymatic reactions. Ferrochelatase is active in formation of the highly fluorescent pigment known from Parma ham as demonstrated by inhibition with N-methylmesoporphyrin and by thermal inactivation. A non-enzymatic transmetallisation reaction, exchange of iron in myoglobin by zinc(II), is demonstrated by Pb(II) inhibition of zinc protoporphyrin formation at low Pb(II) concentrations, but promoted at higher Pb(II) concentrations. The non-enzymatic reaction is characterised as a slow bimolecular reaction between protoporphyrin IX and zinc(II) with a second-order rate constant of 0.63 l mol⁻¹ s⁻¹ at 35 °C and a high energy of activation of 98 kJ mol⁻¹ for acetone:water (3:1, v/v) as solvent. Zinc protoporphyrin formation is concluded to be thermodynamically controlled with a formation constant of 4 × 10⁵ M (35 °C, acetone:water (3:1)). An efficient inhibition of formation of zinc protoporphyrin by nitrite is related to myoglobin as substrate and involves both enzymatic and non-enzymatic reactions.     

Kinetics of the formation of radicals in meat during high pressure processing

The kinetics of the formation of radicals in meat by high pressure processing (HPP) has been described for the first time. A threshold for the radicals to form at 400 MPa at 25 °C and at 500 MPa at 5 °C has been found. Above this threshold, an increased formation of radicals was observed with increasing pressure (400–800 MPa), temperature (5–40 °C) and time (0–60 min). The volume of activation (ΔV^#) was found to have the value −17 ml mol⁻¹. The energy of activation (E_a) was calculated to be 25–29 kJ mol⁻¹ within the pressure range (500–800 MPa) indicating high independence on the temperature at high pressures whereas the reaction was strongly dependent at atmospheric pressure (E_a = 181 kJ mol⁻¹). According to the effect of the processing conditions on the reaction rate, three groups of increasing order of radical formation were established: (1) 55 °C at 0.1 MPa, (2) 500 and 600 MPa at 25 °C and 65 °C at 0.1 MPa, and (3) 700 MPa at 25 °C and 75 °C at 0.1 MPa. The implication of the formation of radicals as initiators of lipid oxidation under HPP is discussed.     

Immobilization of naringinase from Aspergillus niger CECT 2088 in poly(vinyl alcohol) cryogels for the debittering of juices

Naringinase, induced from Aspergillus niger CECT 2088 cultures, was immobilized into a polymeric matrix consisting of poly(vinyl alcohol) (PVA) hydrogel, cryostructured in liquid nitrogen, to obtain biocatalytically active beads. The effects of matrix concentration, enzyme load and pH on immobilization efficiency were studied. Between 95% and 108% of the added naringinase was actively entrapped in PVA cryogel, depending on the conditions of immobilization used. The optimal conditions were: 8% (w/v) PVA at pH 7 and 1.6–3.7 U ml⁻¹ of enzyme load. The pH/activity profiles revealed no change in terms of shape or optimum pH (4.5) upon immobilization of naringinase. However, the optimum temperature was shifted from 60 °C to 70 °C and the activation energy of reaction, E_a, was decreased from 8.09 kJ mol⁻¹ to 6.36 kJ mol⁻¹ by immobilization. The entrapped naringinase could be reused through six cycles (runs of 24 h at 20 °C), retaining 36% efficacy for the hydrolysis of naringin in simulated juice.     

An approximate shelf life prediction of elaborated lager beer in terms of degradation of its iso-α-acids

A 3-l laboratory-scale beer production protocol was designed and developed to produce beer. Concentrations of cis-/trans-iso-α-acids were quantified by HPLC. The trans-/cis-ratio varied from 0.62 to 0.49 after accelerated aging from 4 °C to 50 °C. The degradation of trans-iso-α-acids in elaborated pale lager beers followed first order reaction and this degradation conforms to the Arrhenius equation. The activation energy (E_a) and frequency factor (A) for trans-iso-α-acids in elaborated pale lager beer ranged from 69.2 kJ mol⁻¹ and 1.88 × 10¹⁰ days⁻¹ for trans-isocohumulone to 74.4 kJ mol⁻¹ and 1.3642 × 10¹¹ days⁻¹ for trans-isoadhumulone. The higher value of E_a demonstrated greater temperature sensitivity of trans-iso-α-acids during accelerated storage. The average half life of trans-iso-α-acids in elaborated pale lager beer was found to decrease from 471 days to 12 days when temperature increased from 4 °C to 40 °C. Using the activation energy of trans-α-acid degradation and the temperature profile of the accelerated aging, a mathematical model was employed to predict the loss of iso-α-acids, when the initial concentration of iso-α-acids in the product is known. The results obtained in the investigation can be of great importance to the industry in predicting the alteration of beer bitterness during warm periods and in tropical countries where summer temperature can reach 40 °C.     

Thermal inactivation kinetics of Shiga toxin-producing Escherichia coli in buffalo Mozzarella curd

The use of raw milk in the processing of buffalo Mozzarella cheese is permitted, but the heat treatment used for stretching the curd must ensure that the final product does not contain pathogens such as Shiga toxin-producing Escherichia coli (STEC) that may be present on buffalo dairy farms. This study carried out challenge tests at temperatures between 68°C and 80°C for 2 to 10 min to simulate curd temperatures during the stretching phase. Curd samples were inoculated with 2 STEC strains (serotypes O157 and O26), and their inactivation rates were assessed in the different challenge tests. The curd samples were digested with papain to ensure a homogeneous dispersion of bacteria. The STEC cells were counted after inoculation (range 7.1–8.7 log cfu/g) and after heat treatments using the most probable number (MPN) technique. A plot of log MPN/g versus time was created for each separate experiment. The log linear model with tail was used to provide a reasonable fit to observed data. Maximum inactivation rate (k_max, min⁻¹), residual population (log MPN/g), decimal reduction time (min), and time for a 4D (4-log₁₀) reduction (min) were estimated at each temperature tested. A 4D reduction of the O26 STEC strain was achieved when curd was heated at 68°C for 2.6 to 6.3 min or at 80°C for 2.1 to 2.3 min. Greater resistance was observed for the O157 strain at 68°C because k_max was 1.48 min⁻¹. The model estimates can support cheesemakers in defining appropriate process criteria needed to control possible STEC contamination in raw milk intended for the production of Mozzarella.