EFFECT OF TEMPERATURE ON THE ADSORPTION OF METHYLENE BLUE DYE ONTO SULFURIC ACID–TREATED ORANGE PEEL

The present study explains the preparation and application of sulfuric acid–treated orange peel (STOP) as a new low-cost adsorbent in the removal of methylene blue (MB) dye from its aqueous solution. The effects of temperature on the operating parameters such as solution pH, adsorbent dose, initial MB dye concentration, and contact time were investigated for the removal of MB dye using STOP. The maximum adsorption of MB dye onto STOP took place in the following experimental conditions: pH of 8.0, adsorbent dose of 0.4 g, contact time of 45 min, and temperature of 30°C. The adsorption equilibrium data were tested by applying both the Langmuir and Freundlich isotherm models. It is observed that the Freundlich isotherm model fitted better than the Langmuir isotherm model, indicating multilayer adsorption, at all studied temperatures. The adsorption kinetic results showed that the pseudo-second-order model was more suitable to explain the adsorption of MB dye onto STOP. The adsorption mechanism results showed that the adsorption process was controlled by both the internal and external diffusion of MB dye molecules. The values of free energy change (ΔG ^o) and enthalpy change (ΔH ^o) indicated the spontaneous, feasible, and exothermic nature of the adsorption process. The maximum monolayer adsorption capacity of STOP was also compared with other low-cost adsorbents, and it was found that STOP was a better adsorbent for MB dye removal.     

Application of graphene-based adsorbents in the treatment of dye-contaminated wastewater; kinetic and isotherm studies

The adsorption of methylene blue (MB) on graphene-based adsorbents was tested through the batch experimental method. Two types of graphene-based adsorbents as graphene oxide (GO) and reduced graphene oxide (RGO) were compared to investigate the best adsorbent for MB removal. So that optimizing the MB removal for the selected type of graphene-based adsorbent, the diverse experimental factors, as pH (2–10), contact time (0–1440 min), adsorbent dosage (0.5–2 g/L), and initial MB concentration (25–400 mg/L) were analyzed. The conclusions indicated that the MB removal rised with an increase in the initial concentration of the MB and so rises in the amount of adsorbent used and initial pH. Maximum dye removal was calculated as 99.11% at optimal conditions after 240 min. Adsorption data were compiled by the Langmuir isotherm (R²: 0.999) and pseudo-second-order kinetic models (R²: 0.999). The Langmuir isotherm model accepted that the homogeneous surface of the GO adsorbent covering with a single layer. And the adsorption energy was calculated as 9.38 kJ mol⁻¹ according to the D-R model indicating the chemical adsorption occurred. The results show that GO could be utilized for the treatment of dye-contaminated aqueous solutions effectively.     

Adsorption characteristics of methylene blue on poplar leaf in batch mode: Equilibrium,kinetics and thermodynamics

Adsorption characteristics of methylene blue (MB) from aqueous solution on natural poplar leaf were investigated. Batch experiments were carried out to study the effects of initial pH, contact time, adsorbent dosage, and initial MB concentration, salt concentration (Ca²⁺ and Na⁺) as well as temperature on MB adsorption. The optimum condition for adsorption was found at pH 6–9 and adsorbent dosage of 2 g L⁻¹. The equilibration time was 240 min. The salt concentration had a negative effect on MB removal. The equilibrium data were analyzed with Langmuir, Freundlich and Koble-Corrigan isotherm models using nonlinear regression method. The adsorption process was more effectively described by Langmuir isotherm based on the values of the correlation coefficient R² and chi-square statistic x². The maximum monolayer adsorption capacity of poplar leaf from the Langmuir model was 135.35 mg g⁻¹ at 293 K. The pseudo second order equation provided a better fit to experimental data in the kinetic studies. Intraparticle diffusion was involved in adsorption process, but it was not the only rate-controlling step. Thermodynamic quantities such as ΔG, ΔH and ΔS were calculated, indicating that the adsorption process was spontaneous and endothermic. Dye-adsorbent interactions were examined by FTIR and SEM analysis. The FTIR results suggested that there were hydroxyl and carboxyl groups on the surface of poplar leaf, which would make MB adsorption possible. The SEM images showed effective adsorption of MB molecules on the adsorbent surface.     

Radiation-initiated chitosan-based double network hydrogel: Synthesis,characterization, and adsorption of methylene blue

A novel chitosan (CTS)-based double network Poly(2-acrylaMido-2-Methyl-1-propanesulfonic acid)/Polyacrylamide/CTS hydrogel was synthesized by irradiation initiated. Laponite RD (RD) was used as both dopant and the cross-linking agent. Then the fabricated hydrogel was applied as an efficient adsorbent to remove the methylene blue (MB) in an aqueous solution. This hydrogel has both high strength and good adsorption properties for MB. The results from Brunauer–Emmett–Teller method confirmed that the hydrogel has a large specific surface area (96 m²/g) and developed pore structure, which is available for the contact between the adsorbent and dye molecules. In the adsorption process, the RD provides plenty of negative charges as adsorption sites for MB molecules. The influence of pH, temperature, and adsorbent dose on the adsorption performance was investigated in detail. The experimental data fit well with the pseudo-second-order kinetic model and Langmuir isotherm. Besides, the mechanical strength of the hydrogel was also investigated in this work.     

Adsorption of methylene blue from aqueous solution onto multiporous palygorskite modified by ion beam bombardment: Effect of contact time,temperature, pH and ionic strength

Our previous work has reported that an inorganic nano-network of palygorskite with multiporous structure can be fabricated from rigid nano-rods by ion beam bombardment and has better adsorption capability than nano-rods. Here, this dispersed modified nano adsorbent was characterized by Fourier Transform Infrared (FTIR) spectroscopy and Scanning Electron Microscope (SEM). The adsorption property of methylene blue (MB) onto this adsorbent was investigated. It was found that the adsorption capacity increased with contact time, pH, MB initial concentration, respectively, and then reached an equilibrium. Moreover, the effect of pH on the adsorption was strongly determined by zeta potential. The adsorption kinetics of MB was dominated by the pseudo-second-order reaction model, and the adsorption isotherms fit the Freundlich isotherms better than the Langmuir isotherms. Three temperatures (293 K, 303 K, 313 K) were set for describing the thermodynamic parameters (ΔH^θ, ΔS^θ, and ΔG^θ), which indicated that the adsorption was spontaneous and exothermic. Lastly, the mechanism of the influence of ionic strength on the adsorption was discussed.     

碱性钙基膨润土对亚甲基蓝和刚果红的吸附去除

该文研究了碱性钙基膨润土(ACB)对水体中的亚甲基蓝(MB)和刚果红(CR)染料的吸附性能,考察了吸附剂用量、吸附时间及温度、pH及盐等因素对吸附效果的影响,同时进行了两种染料在碱性钙基膨润土上的吸附等温模型、吸附动力学模型研究。结果表明,ACB对MB、CR的脱色率随着吸附剂用量的增加而增加,在实验条件下,50 mg/L MB和100 mg/L CR的最佳吸附剂质量浓度分别为1.0 g/L和2.0 g/L;升高温度可以加快吸附速率,但对最终的脱色率影响很小;50 mg/L MB的吸附平衡时间在60 min左右,100 mg/L CR的吸附平衡时间在120 min左右;在pH=3～12时,ACB对MB的脱色率都稳定在99%左右,而适宜ACB吸附CR的pH=3～7,对CR的脱色率保持在90%左右;NaCl的加入对MB的吸附效果影响很小,对CR的吸附则有很强的抑制作用;ACB对MB的吸附同时符合Langmuir和Freundlich模型,而ACB对CR的吸附则更符合Langmuir模型;ACB对两种染料的吸附过程均符合准二级动力学模型,颗粒内扩散模型的拟合结果说明吸附过程存在颗粒内扩散作用。     

Removal of methylene blue from aqueous solution by adsorption onto zeolite synthesized from coal fly ash and its thermal regeneration

BACKGROUND: The removal of cationic dyes from wastewater is of great importance. Three zeolites synthesized from coal fly ashes (ZFAs) were investigated as adsorbents to remove methylene blue (MB), a cationic dye, from aqueous solutions. Experiments were conducted using the batch adsorption technique under different conditions of initial dye concentration, adsorbent dose, solution pH, and salt concentration. RESULTS: The adsorption isotherm data of MB on ZFAs were fitted well to the Langmuir model. The maximum adsorption capacities of MB by the three ZFAs, calculated using the Langmuir equation, ranged from 23.70 to 50.51 mg g^?1. The adsorption of MB by ZFA was essentially due to electrostatic forces. The measurement of zeta potential indicated that ZFA had a lower surface charge at alkaline pH, resulting in enhanced removal of MB with increasing pH. MB was highly competitive compared with Na⁺, leading to only a < 6% reduction in adsorption in the presence of NaCl up to 1.0 mol L^?1. Regeneration of used ZFA was achieved by thermal treatment. In this study, 90–105% adsorption capacity of fresh ZFA was recovered by heating at 450 °C for 2 h. CONCLUSION: The experimental results suggest that ZFA could be employed as an adsorbent in the removal of cationic dyes from wastewater, and the adsorptive ability of used ZFA can be recovered by thermal treatment. Copyright © 2010 Society of Chemical Industry     

Adsorption and heat‐energy‐aid desorption of cationic dye on a new thermo‐sensitive adsorbent: Methyl cellulose/calcium alginate beads

The adsorption and heat‐energy‐aid desorption of methylene blue (MB) on a thermo‐sensitive adsorbent of methyl cellulose/calcium alginate beads (MC/CABs) has been studied. The addition of methyl cellulose intensified the desorption ability of adsorbent, and boosted the difference of adsorption capacity of adsorbent between low temperature and high temperature. At the mass ratio of methyl cellulose to sodium alginate of 2:1, the difference of adsorption capacity of MC/CABs between 20 and 60°C reached 20.48 mg g^?1. The effects of temperature, time and initial MB concentration on adsorption performance were investigated in detail. The MB adsorption on MC/CABs followed the pseudo‐second‐order kinetic model. The equilibrium data was fitted well with Langmuir isotherm. The maximum adsorption capacity of 336.70 mg g^?1 exhibited MC/CABs had a good adsorption capability. Thermodynamic analyses showed high temperature was not favorable to MB adsorption, and MC/CABs had a distinct superiority in desorption of adsorbate with heat‐energy‐aid. Lastly, the possible mechanisms involving in adsorption and heat‐energy‐aid desorption were presented. POLYM. ENG. SCI., 56:1382–1389, 2016. © 2016 Society of Plastics Engineers     

Methylene blue adsorption from aqueous solutions to flexible poly(vinyl chloride) silica composites

Methylene blue (MB) adsorption studies were performed with poly(vinyl chloride)‐(dioctyl phthalate)‐silica composites, which were obtained by using plastisol‐plastigel technology. The films were flexible, having elastic modulus of 1.0–1.5 GPa. Diminishing MB concentration in the aqueous phase was followed as the adsorption process advanced by using visible spectroscopy. Contributions of the individual components of the composites to adsorption were also investigated. Although the MB adsorption capacity was extensively high for silica, it was moderate for the composite, most likely owing to the occlusion of pores of silica by plasticizer to some extent. The improvement of MB adsorption capacity of the composites as the silica ratio increased was explicitly deduced from the optical microscopy photographs. The diffusion coefficients of MB through the composites were 5 × 10^?13, 6 × 10^?13, and 3 × 10^?13 m² s^?1 with regression coefficients of 0.73, 0.89, and 0.88 for 0, 2, and 16% silica‐containing composites, respectively. Because of the slow diffusion of MB in poly(vinyl chloride)‐silica composites, using them as dynamic column adsorbent was not practical. However, these versatile plastics can be used as plastic labels, colored clothing, leather substitutes, antimicrobial medical devices, and laser printable surfaces. J. VINYL ADDIT. TECHNOL., 21:42–50, 2015. © 2014 Society of Plastics Engineers     

Chitosan/polyaniline hybrid for the removal of cationic and anionic dyes from aqueous solutions

Nanostructured chitosan/polyaniline (CH/PANI) hybrid was synthesized via in situ polymerization of aniline in the presence of chitosan. The CH/PANI hybrid was characterized by FTIR spectroscopy, X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy. The CH/PANI hybrid had a nanofibrous structure with an average diameter of 70 nm. This hybrid was employed as an ecofriendly and efficient adsorbent with high adsorption capacity for the removal of Acid Green 25 (AG) and methylene blue (MB) from aqueous solutions. AG and MB were used as anionic and cationic model dyes, respectively. The CH/PANI adsorbent showed high dependence on the pH of the medium with an excellent adsorption performance and regeneration manner. The kinetics and adsorption isotherms were studied. The CH/PANI hybrid follows the pseudo second-order adsorption kinetics and Temkin isotherm model for the adsorption of both AG and MB dyes. This assumes that the enthalpy of dyes molecules decreases with the adsorption on heterogeneous surface with various kinds of adsorption sites and as well as the ability to form multilayers of the dye. Also, intraparticle diffusion was found to play an important role in the adsorption mechanism. The maximum adsorption capacity was found to be 240.4 mg g⁻¹ of AG at pH 4 and 81.3 mg g⁻¹ of MB at pH 11. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47056.     

Removal of methylene blue from coloured effluents by adsorption onto SBA‐15

Adsorption has been proven to be the most efficient method for quickly lowering the concentration of dissolved dyes in an effluent. In this regard, activated carbon is the most widely used adsorbent for removal of dyes from aqueous solution. However, the high cost of production and regeneration make it uneconomical. Therefore, inorganic adsorbents (e.g. zeolites) with high surface areas have been used as alternatives to carbon adsorbents. Microporous zeolites ZSM‐5, NH₄‐Beta, MCM‐22 and mesoporous materials MCM‐41 have been investigated for the removal of dyes from aqueous solutions and they show effective adsorption performance. SBA‐15 possesses a larger pore size and pore wall thickness than MCM‐41. As a result, SBA‐15 has greater potential for the adsorption of methylene blue with larger molecule size and higher hydrothermal stability than the M41S family. SBA‐15 is an excellent adsorbent for methylene blue (MB), exhibiting 280 mg g^?1 adsorption capacity and about 100% fading rate for MB. The adsorptive process is so fast that adsorption equilibrium is achieved in 5 min. In addition, SBA‐15 can be effectively recovered by calcination and reused 10 times without significant loss in removal of MB from aqueous solution. The efficient adsorption of MB molecules onto SBA‐15 was ascribed to MB adsorbed into the pore channels of SBA‐15, which was confirmed by nitrogen physisorption analysis of the adsorbent before and after adsorption. The long reuse life of the adsorbent suggests a high potential for application in industry. Copyright © 2010 Society of Chemical Industry     

Removal of methylene blue (aq) using untreated and acid‐treated eucalyptus leaves and GA‐ANN modelling

In the present batch study, eucalyptus leaves (EUL), H₂SO₄‐treated eucalyptus leaves (SEUL), and H₃PO₄‐treated eucalyptus leaves (PEUL) are used as bio‐adsorbents for the removal of methylene blue (MB). The bio‐adsorption is executed to inspect the results of the variation between different experimental variables such as pH (2–10), adsorbent dose (1–10 g/L), contact time (5–360 min), and temperature (298–318 K) on the bio‐adsorption of MB. The Langmuir isotherm (R² = 0.99) fitted adequately to the bio‐adsorption data for the initial MB concentrations of 10–300 mg/L. It is also necessary to mention that the MB bio‐adsorption occurred in the order of a monolayer on the EUL, SEUL, and PEUL. The bio‐adsorption kinetics have been fitted by the pseudo‐second‐order model (R² ≥ 0.99) for various MB concentrations. The maximum bio‐adsorption capacity was 194.34 mg/g and was achieved for the H₃PO₄‐treated eucalyptus leaves (PEUL). These results showed that EUL, SEUL, and PEUL may be utilized as a favourable low‐cost bio‐adsorbent to eliminate MB from aqueous solutions. With safe disposal methods in mind, this investigation has revealed the eco‐friendliness of the bio‐adsorbents. A prediction of the removal percentage of methylene blue using a genetic algorithm (GA) from the data collected from the experiment has also been tested. The results related to the prediction using the GA‐ANN are accurate.     

p-Sulphonatocalix[8]arene functionalized silica resin for the enhanced removal of methylene blue from wastewater: equilibrium and kinetic study

ABSTRACT

The present investigation represents the synthesis of new p-sulphonatocalix[8]arene-based silica resin, p-SC8SR (5) and its application for the enhanced removal of methylene blue (MB) dye from contaminated water. The new p-SC8SR (5) resin was characterized by FT-IR, SEM, and EDX spectroscopy. The adsorption of MB on p-SC8SR (5) was investigated systematically by evaluating the effects of adsorbent dosage, initial pH, contact time, dye concentration, and ionic strength. Excellent adsorption (94%) of MB on p-SC8SR (5) was achieved at pH 9.5, contact time 10 min by using 0.2 mol L^?1 ionic strength and 2 × 10^?5 M initial MB dye concentration. Kinetic behavior of MB dye adsorption process on the newly synthesized p-SC8SR (5) adsorbent follows the pseudo-second-order rate model (R² = 0.998 and 0.999 for 2 × 10^?5 M and 1 × 10^?4 M, respectively). Adsorption isotherms were fitted well by the Freundlich model with excellent value of coefficient of determination (R²) = 0.995 which demonstrated that the adsorption of MB follows multilayer mechanism. Wastewater samples contaminated with MB were used to assess efficiency of the p-SC8SR (5) adsorbent. Results indicated that newly synthesized p-SC8SR (5) was found to be efficient adsorbent. During the removal process, the role of different functional groups’ cyclic structure was scrutinized and found that the ionic property as well as π–π interaction of host molecules played imperative role in the extent of adsorption.     

Adsorption of methylene blue onto powdered activated carbon immobilized in a carboxymethyl sago pulp hydrogel

The potential of crosslinked carboxymethyl sago pulp (CMSP) beads immobilized with powdered activated carbon (PAC) as an adsorbent for methylene blue (MB) adsorption was investigated. The finely powdered PAC had an excellent adsorption capacity for MB but was disadvantageous for the separation process from treated effluents. To ease the separation process, the CMSP medium could be advantageous for the process by acting an immobilizing medium for PAC. The MB adsorption reached equilibrium at the 14th hour, and further adsorption was studied to determine the effects of the CMSP concentration, PAC dosage, and pH. Different CMSP concentrations in the preparation of CMSP–PAC beads showed no significant differences; this proved that CMSP–PAC adsorbed more MB than CMSP did. The MB adsorption increased with increasing PAC concentration, whereas the CMSP–PAC beads disintegrated at pH 11.5. In the equilibrium study, the Langmuir isotherm fit well into the experimental data with a linear correlation coefficient (R ²) of 0.9837 and a maximum adsorption capacity of 250 mg/g. The kinetic study showed that pseudo‐second‐order kinetics accommodated the experimental data well with an R ² value of 0.9512 and a pseudo‐second‐order rate constant value of 3.61 × 10^?3 min^?1. The crosslinked CMSP–PAC beads have the potential to remove MB dye, and this could be exploited as an alternative to treating colored dye effluents produced by industries such as the textile, printing, and cosmetics industries. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44271.     

Hydrogels with diffusion-facilitated porous network for improved adsorption performance

Porous alginate-based hydrogel beads (porous ABH) have been prepared through a facile and sustainable template-assisted method using nano-calcium carbonate and nano-CaCO₃ as pore-directing agent for the efficient capture of methylene blue (MB). The materials were characterized by various techniques. The sorption capacities of ABH towards MB were compared with pure sodium alginate (ABH-1:0) in batch and fixed-bed column adsorption studies. The obtained adsorbent (ABH-1:3) has a higher BET surface area and a smaller average pore diameter. The maximum adsorption capacity of ABH-1:3 obtained from Langmuir model was as high as 1,426.0mg g^-1. The kinetics strictly followed pseudo-second order rate equation and the adsorption reaction was effectively facilitated, approximately 50minutes to achieve adsorption equilibrium, which was significantly shorter than that of ABH-1:0. The thermodynamic parameters revealed that the adsorption was spontaneous and exothermic. Thomas model fitted well with the breakthrough curves and could describe the dynamic behavior of the column. More significantly, the uptake capacity of ABH-1:3 was still higher than 75% of the maximum adsorption capacity even after ten cycles, indicating that this novel adsorbent can be a promising adsorptive material for removal of MB from aqueous solution under batch and continuous systems.     

Removal of methylene blue from aqueous solution by a carbon-microsilica composite adsorbent

Microsilica, one kind of industrial solid waste material, was utilized firstly to prepare a carbon-microsilica composite adsorbent (CMS). The prepared adsorbent was characterized with XPS, SEM and Gas sorption experiments. The results indicated the SO₃H groups, which are very effective in capturing cationic organic dye, were introduced onto the surface of CMS; the Brunauer-Emmett-Teller (BET) surface area (S _BET ) and total pore volume (V _total ) of CMS reach 51m²/g and 0.045 cm³/g, respectively. Meanwhile, the possibility of the utilization of the adsorbent for removal of methylene blue (MB) from aqueous solution was investigated. The effect of pH, contact time and initial MB concentration for MB removal were studied. Equilibrium data were modeled using the Langmuir, Freundlich and Dubinin-Radushkevich equations to describe the equilibrium isotherms. It was found that data fit to the Langmuir equation better than the Freundlich equation. Maximum monolayer adsorption capacity was calculated at different temperatures (298, 308, and 318 K) reach 251.81, 283.76 and 309.70 mg/g, respectively. It was observed that adsorption kinetics obeys the pseudo-first-order equation.     

Activated carbon from bacterial cellulose as an effective adsorbent for removing dye from aqueous solution

ABSTRACT

Novel activated carbon (AC) derived from bacterial cellulose (BC-AC) was produced by phosphoric acid activation at a carbonization temperature of 500 °C. BC-AC possesses mesoporous structures of 2.3 nm in diameter, porosity of 1.0 cm³/g and surface area of 1734 m²/g with high thermal stability between 100 and 500 °C. BC-AC could be used as an effective adsorbent for removing methylene blue (MB) from aqueous solutions with the maximum adsorption capacity of 505.8 mg/g. BC-AC presented physisorption and the adsorption of MB was most likely to be a monolayer adsorption. The Redlich–Peterson model displayed the best fit with the experimental data.     

The removal of cationic dyes from aqueous solutions by adsorption onto pistachio hull waste

The efficacy of pistachio hull powder (PHP) prepared from agricultural waste was investigated in this study as a novel adsorbent for the elimination of dye molecules from contaminated streams. Removal of methylene blue (MB) as a cationic model dye by PHP from aqueous solution was studied under different experimental conditions. The selected parameters were solution pH (2–10), PHP dosage (0.5–3 g/L), MB concentrations (100–400 mg/L), contact time (1–70), and solution temperature (20–50 °C). The experimental results indicated that the maximum MB removal could be attained at a solution pH of 8. The dosage of PHP was also found to be an important variable influencing the MB removal percentage. The removal efficiency of MB improved from 94.6 to 99.7% at 70 min contact time when the MB concentration was decreased from 300 to 100 mg/L at a pH and PHP dosage of 8 and 1.5 g/L, respectively. The kinetic analysis showed that the pseudo-second-order model had the best fit to the experimental data. The Langmuir equation provided the best fit for the experimental data of the equilibrium adsorption of MB onto PHP at different temperatures. In addition, the maximum adsorption capacity increased from 389 to 602 mg/g when the temperature was increased from 20 to 50 °C. The thermodynamic evaluation of MB adsorption on PHP revealed that the adsorption phenomenon under the selected conditions was a spontaneous physical process. Accordingly, pistachio hull waste was shown to be a very efficient and low-cost adsorbent, and a promising alternative for eliminating dyes from industrial wastewaters.     

Removal of methylene blue from aqueous solutions by adsorption onto chemically activated halloysite nanotubes

This study examines the adsorption behavior of methylene blue (MB) from aqueous solutions onto chemically activated halloysite nanotubes. Adsorption of MB depends greatly on the adsorbent dose, pH, initial concentration, temperature and contact time. The Langmuir and Freundlich models were applied to describe the equilibrium isotherms and the Langmuir model agrees very well with experimental data. The maximum adsorption capacities for MB ranged from 91.32 to 103.63 mg·g⁻¹ between 298 and 318 K. A comparison of kinetic models applied to the adsorption data was evaluated for pseudo-first-order, pseudo-second-order, Elovich and intra-particle diffusion equation. The results showed the adsorption process was well described by the pseudo-second-order and intra-particle diffusion mode. Thermodynamic parameters suggest that the adsorption is spontaneous and endothermic. The obtained results indicated that the product had the potential to be utilized as low-cost and effective alternative for dye removal in wastewater.     

Adsorption of heavy metals and methylene blue from aqueous solution with citric acid modified peach stone

Peach stones (PS) modified by citric acid (MPS) were used to remove heavy metals and methylene blue (MB) from wastewater. The effects of experimental factors such as pH, adsorbent dosage and contact time, etc. were conducted. Moreover, the adsorption kinetics and isotherm studies also were investigated. According to the Langmuir isotherm model, the maximum adsorption capacities of Pb²⁺, Cd²⁺, Cu²⁺ and MB were 118.76, 37.48, 32.22 and 178.25 mg/g, respectively. Finally, column experiments were also carried out to investigate the adsorption of Pb²⁺ and MB. All results indicated that PS has a good potential for the treatment of wastewater.