Microstructure and Thermoelectric Properties of Bi- and Cu-Substituted Ca3Co4O9 Oxides

Bi- and Cu-substituted Ca₃Co₄O₉ samples were prepared by conventional solid-state reaction method and the e?ect of element substitution on the microstructures and thermoelectric properties was investigated. Partial substitution of Cu for Co leads to an increase in electrical conductivity and a decrease in Seebeck coe±cient due to the rise of hole concentration. The microstructure of Cu-substituted sample is almost unchanged compared with undoped Ca₃Co₄O₉. On the other hand, partial substitution of Bi for Ca gives rise to a significant increase in the grain size, and c-axis-oriented structure can be formed in Ca_2.7Bi_0.3Co₄O₉, resulting in an obvious increase in electrical conductivity. Cu and Bi co-substitution further increases the grain growth and the electrical conductivity of Ca_2.7Bi_0.3Co_3.7Cu_0.3O₉. Thus, Cu and Bi co-substitution samples possess the optimal thermoelectric performance at high temperature and the highest value of power factor can reach 3.1×10^-4 Wm^-1?K^-2 at 1000 K.     

Synthesis of Co3O4 nanoparticles via the CTAB-assisted method

Cobalt oxide (Co₃O₄) nanoparticles were successfully synthesized by the cetyltrimethylammonium bromide (CTAB)-assisted method at normal pressure for the first time. The structure and morphology of the as-prepared Co₃O₄ nanoparticles were characterized by powder X-ray diffracton (XRD), infrared spectroscopy (IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and N₂-sorption analysis. XRD studies indicated that the as-prepared product was well-crystallized cubic phase of Co₃O₄ with a cell constant of α = 8.0722 Å. The EM images showed that the obtained Co₃O₄ sample consisted of dispersive quasi-spherical particles with the size ranged from 15 to 25 nm.     

Interface characterization and thermal degradation of ferrite/poly(vinylidene fluoride) multiferroic nanocomposites

Flexible multiferroic 0–3 composite films, with CoFe₂O₄, Ni_0.5Zn_0.5Fe₂O₄ or NiFe₂O₄ ferrite nanoparticles as filler and polyvinylidene fluoride (PVDF) as the polymer matrix, have been prepared by solvent casting and melt crystallization. The inclusion of ferrite nanoparticles in the polymer allows to obtain magnetoelectric nanocomposites through the nucleation of the piezoelectric β-phase of the polymer by the ferrite fillers. Since the interface between PVDF and the nanoparticles has an important role in the nucleation of the polymer phase, thermogravimetric analysis was used in order to identify and quantify the interface region and to correlate it with the β-phase content. It is found that an intimate relation exists between the size of the interface region and the piezoelectric β-phase formation that depends on the content and type of ferrite nanoparticles. The interface value and the β-phase content increase with increasing ferrite loading and they are higher for CoFe₂O₄ and Ni_0.5Zn_0.5Fe₂O₄ ferrite nanoparticles. The composites shows lower thermal stability than the pure polymer due to the existence of mass loss processes at lower temperature than the main degradation of the polymer. The main degradation of the polymer matrix, nevertheless, shows increased degradation temperature with increasing ferrite content.     

Preparation of Fe3O4/PVA nanofibers via combining in-situ composite with electrospinning

A novel approach, combining in-situ composite method with electrospinning, was used to prepare high magnetic Fe₃O₄/poly(vinyl alcohol) (PVA) composite nanofibers. Fe₃O₄ magnetic fluids were synthesized by chemical co-precipitation method in the presence of 6 wt.% PVA aqueous solution. PVA was used as stabilizer and polymeric matrix. The resulting Fe₃O₄/PVA composite nanofibers were characterized with field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and X-ray diffractometer (XRD), respectively. These composite fibers showed a uniform and continuous morphology, with the Fe₃O₄ nanoparticles embedded in the fibers. Magnetization test confirmed that the composite fiber showed a high saturated magnetization (M_s = 2.42 emµ·g^-1) although only 4 wt.% content.     

Preparation and characterisation of PPy/NanoGs/Fe3O4 conductive and magnetic nanocomposites

Nanocomposites composed of polypyrrole (PPy), graphite nanosheets (NanoGs), magnetite (Fe₃O₄) nanoparticles, have been successfully synthesised with a two-step process. First, we prepared NanoGs/Fe₃O₄ powder via wet chemical co-precipitation method. Next, pyrrole was polymerised in the suspension of NanoGs/Fe₃O₄ and then PPy/NanoGs/Fe₃O₄ nanocomposites were produced. The products were characterised by Fourier-transform infrared spectroscopy, Transmission electron microscopy, Thermogravimetric, conductivity and magnetisation analysis. The result showed that the conductivity of the PPy/NanoGs/Fe₃O₄ composites, compared with pure PPy, increased dramatically. And the saturation magnetisation of nanocomposites increased with the increase of the volume fraction of the Fe₃O₄ particles. In addition, according to the thermal gravimetric analysis, compared with PPy, nanocomposites exhibited enhanced thermal stability due to the introduction of NanoGs/Fe₃O_4. The PPy/NanoGs/Fe₃O₄ composites show potential applications in electric–magnetic shield materials.     

Synthesis and characterization of Co3O4/RuO2 composite nanofibers fabricated by an electrospinning method

Co₃O₄-RuO₂ composite nanofibers (NFs) were synthesized by an electrospinning method and were calcinated at 400°C for 1 hr in air. Scanning electron microscopy and high-resolution transmission electron microscopy (HRTEM) examinations show that all the synthesized NFs have uniform surface morphology and their diameters are in the range of ~ 30-~70 nm. X-ray diffraction (XRD) results show that crystalline Co₃O₄ phase and RuO₂ phase coexist in the composite NF matrix which is confirmed by X-ray photoemission spectroscopy. In addition, the HRTEM energy-dispersive X-ray spectroscopy mapping results show that the Co₃O₄ and RuO₂ phases are uniformly distributed across the NF matrix.     

Properties of polyimide/Al2O3 and Si3N4 deposited thin films

Polyimide (PI) nanocomposites with different proportions of Al₂O₃ were prepared via two-step reaction. Silicon nitride (Si₃N₄) was deposited on PI composite films by a RF magnetron sputtering system and used as a gas barrier to investigate the water vapor transmission rate (WVTR). The thermal stability and mechanical properties of a pure PI film can be improved obviously by adding adequate content of Al₂O₃. At lower sputtering pressure (4 mTorr), the PI/Al₂O₃ hybrid film deposited with Si₃N₄ barrier film exhibits denser structure and lower root mean square (RMS) surface roughness (0.494 nm) as well as performs better in preventing the transmission of water vapor. The lowest WVTR value was obtained from the sample, 4 wt.%Al₂O₃-PI hybrid film deposited with Si₃N₄ barrier film with the thickness of 100 nm, before and after bending test. The interface bonding, Al-N and Al-O-Si, was confirmed with the XPS composition-depth profile.     

Synthesis and characterization of Ca3Co4O9 thin films prepared by sol-gel spin-coating technique on Al2O3(001)

Ca₃Co₄O₉ thin films are deposited on Al₂O₃(001) substrates using a sol-gel spin-coating process. X-ray diffraction shows that the film exhibits a single phase of Ca₃Co₄O₉ with the (00l) planes parallel to the film surface. The temperature dependence of magnetic susceptibility showed as expected the existence of two magnetic transitions similar to those observed in bulk samples: a ferrimagnetic and a spin-state transition around 19 and 375 K, respectively. At 5 K the magnetization curves along the c-axis of the Al₂O₃(001) show that the remanent magnetization and coercive field are close to those obtained for films grown by pulsed laser deposition, which evidences the interest to use such an easy technique to grow complex thin films oxides.     

Polyaniline/Fe3O4 nanocomposites synthesized under the direction of cationic surfactant

Polyaniline(PANi)/Fe₃O₄ nanocomposites have been prepared via in situ chemical oxidative polymerization directed with cationic surfactant cetyltrimethylammonium bromide (CTAB). The studies show that PANi can coat Fe₃O₄ nanoparticles. CTAB can produce insoluble substance with initiator of polyreaction, and plays a very important role for the coating of Fe₃O₄ nanoparticles by PANi. Many Fe₃O₄ nanoparticles are bald without being coated by PANi when CTAB is replaced by anionic surfactant, so anionic surfactant can not play the role of CTAB.     

Synthesis and characterization of Co3O4 hollow spheres

Co₃O₄ hollow spheres were hydrothermally prepared at 130 °C for 16 h in the presence of Poly-vinylpyrrolidone (PVP). The as-prepared products were characterized by powder X-ray diffraction (XRD), field-emission scanning electron microscope (FE-SEM), transmission electron microscopy (TEM), infrared spectrum (IR), X-ray photoelectron spectrum (XPS), and optical absorption spectrum. PVP surfactant plays important roles in the formation of Co₃O₄ hollow spheres. These Co₃O₄ hollow spheres have average diameters of ca. 350 nm, and the wall thickness around the shell is about 42 nm. The possible formation mechanism of hollow Co₃O₄ spherical structures has simply been proposed.     

Facile synthesis and characterization of polypyrrole/Co<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocomposites with adjustable intrinsic electroconductivity

Polypyrrole (PPY)/Co₃O₄ nanocomposites (NCs) were synthesized by a facile in situ polymerization of pyrrole in the presence of Co₃O₄ nanoparticles which were obtained by a rheological phase reaction method. The structure and morphology of the as-prepared PPY/Co₃O₄ NCs were investigated by X-ray diffraction, Fourier transform infrared spectra, Raman spectra, scanning electron microscopy and transmission electron microscopy, which confirmed the formation of the nanocomposites and indicated some interactions between PPY chains and Co₃O₄ nanoparticles. Different PPY/Co₃O₄ ratios were selected in order to study conductive properties. The electrical conductivity measurements indicated that ac conductivity tended to remain constant up to about 10⁷ Hz for all samples, and thereafter increased with frequency. The desired electrical properties of PPY/Co₃O₄ NCs can be modulated simply by controlling the contents of Co₃O₄ nanoparticles.     

Supercritical fluid mediated synthesis of poly(2-hydroxyethyl methacrylate)/Fe3O4 hybrid nanocomposite

Poly(2-hydroxyethyl methacrylate) (PHEMA) and magnetic nanoparticle (Fe₃O₄) hybrid nanocomposite was synthesized by dispersion polymerization in supercritical carbon dioxide (scCO₂) using a copolymeric stabilizer, poly[(2-dimethylamino)ethyl methacrylate-co-1H,1H-perfluorooctyl methacrylate] (PDMAEMA-co-PFOMA). Fe₃O₄ nanoparticles were first surface-modified with a silane coupling agent methacryloxypropyltrimethoxysilane (MPTMS), which provides a reactive CC bond and can copolymerize with 2-hydroxyethyl methacrylate (HEMA). After immobilization of the silane coupling agent, polymer chains were successfully grafted onto the surface of Fe₃O₄, resulting in the formation of core-shell nanostructure. FE-TEM pictures showed that the nanoparticles were well dispersed in the polymer matrix. The incorporation of Fe₃O₄ in the nanocomposite was confirmed by FT-IR, XRD and XPS. Thermal stability and magnetic property increase with the increasing amount of Fe₃O₄ nanoparticles in the composite. This new environmentally benign green synthetic route may offer advantages of easy separation and solvent removal.     

A new method for surface modification of TiO2/Al2O3 nanocomposites with enhanced anti-friction properties

In this paper, the TiO₂/Al₂O₃ composite nanoparticles were prepared by a hydrothermal method and in situ modified with acrylic acid. It was found that the mean particle size of modified TiO₂/Al₂O₃ composite nanoparticles was about 80 nm with a uniform distribution by the particle size analysis. The modified TiO₂/Al₂O₃ composite nanoparticles can disperse in lubricating oil homogenously for several weeks. The dispersion stabilization of modified TiO₂/Al₂O₃ composite nanoparticles in lubricating oil was significantly improved in comparison with the as-prepared nanoparticles, which was due to the introduction of grafted polymers by surface modification. The formation of covalent bands was identified by Fourier transform infrared spectrum. Under an optimized concentration of 0.1 wt%, the averaged friction coefficient was reduced by 14.75%, when the modified TiO₂/Al₂O₃ composite nanoparticles were used as lubricating oil additivities.     

Research on hydrophobicity of electrospun Fe3O4/PVDF nanofiber membranes under different preparation conditions

Abstract

Preparation condition can affect the structure and the properties of nanofiber membrane. In order to explore suitable conditions to prepare the Fe₃O₄/PVDF nanofiber membrane with good hydrophobicity, the hydrophobicity of Fe₃O₄/PVDF nanofiber membranes obtained by electrospinning was investigated by changing preparation conditions like weight percentage of Fe₃O₄ nanoparticles, blending quality concentration of poly (vinylidene fluoride) (PVDF) and Fe₃O₄ nanoparticles, and positive voltage. And the variations of hydrophobicity of Fe₃O₄/PVDF nanofiber membranes modified by 1H, 1H, 2H, 2H-perfluorodecyl trimethoxysilane were studied. The results show that the hydrophobicity of Fe₃O₄/PVDF nanofiber membranes has changed under different preparation conditions. The contact angles of samples increased after a modification by 1H, 1H, 2H, 2H-perfluorodecyl trimethoxysilane, which indicates that the hydrophobicity of Fe₃O₄/PVDF nanofiber membranes has been enhanced.     

Synthesis and electrochemical properties of Co3O4 nanofibers as anode materials for lithium-ion batteries

Co₃O₄ nanofibers as anode materials for lithium-ion batteries were prepared from sol precursors by using electrospinning. The morphology, structure and electrochemical properties of Co₃O₄ nanofibers were characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and charge-discharge experiments. The results show that Co₃O₄ nanofibers possessed typical spinel structure with average diameter of 200 nm. The initial capacity of Co₃O₄ nanofibers was 1336 mAhg^− 1 and the capacity reached 604 mAhg^− 1 up to 40 cycles. It was suggested that the high reversible capacity could be ascribed to the high surface area offered by the nanofibers' structure.     

Synthesis and spectroscopic investigations of Mn3O4 nanoparticles

Trimanganese tetraoxide (Mn₃O₄) nanoparticles have been synthesized via hydrothermal process. Nevertheless, homogeneous nanoparticles of Mn₃O₄ with platelet lozange shape were obtained. The crystallite size ranged from 40 to 70 nm. The Mn₃O₄ product was investigated by X-ray diffraction, transmission electron microscopy (MET), and impedance spectroscopy. Electrical conductivity measurements showed that the as-synthesized Mn₃O₄ nanomaterial has a conductivity value which goes from 1.8 10⁻⁷ Ω⁻¹ cm⁻¹ at 298 K, to 23 10⁻⁵ Ω⁻¹ cm⁻¹ at 493 K. The temperature dependence of the conductivity between 298 and 493 K obeys to Arrhenius law with an activation energy of 0.48 eV.     

Growth and structure characterization of epitaxial Bi2Sr2Co2Oy thermoelectric thin films on LaAlO3 (001)

Epitaxial Bi₂Sr₂Co₂O_y thin films with excellent c-axis and ab-plane alignments have been grown on (001) LaAlO₃ substrates by chemical solution deposition using metal acetates as starting materials. Microstructure studies show that the resulting Bi₂Sr₂Co₂O_y films have a well-ordered layer structure with a flat and clear interface with the substrate. Scanning electron microscopy of the films reveals a step-terrace surface structure without any microcracks and pores. At room temperature, the epitaxial Bi₂Sr₂Co₂O_y films exhibit a resistivity of about 2 mΩ cm and a seebeck coefficient of about 115 μV/K comparable to those of single crystals.     

Electrical conductivity of 5 mol.% Yb2O3 and 5 mol.% Gd2O3 co-doped Sm2Zr2O7

Sm₂Zr₂O₇ co-doped with and without 5 mol.% Yb₂O₃ and 5 mol.% Gd₂O₃ were prepared by a pressureless-sintering method at 1973 K for 10 h in air. The relative density, structure and electrical conductivity were investigated by the Archimedes method, X-ray diffraction, scanning electron microscopy and impedance spectra measurements. Both Sm₂Zr₂O₇ and (Sm_0.9Gd_0.05Yb_0.05)₂Zr₂O₇ ceramics exhibit a single phase of pyrochlore-type structure. The grain conductivity, grain-boundary conductivity and total conductivity obey the Arrhenius relation, respectively, and gradually increase with increasing temperature from 723 to 1173 K. (Sm_0.9Gd_0.05Yb_0.05)₂Zr₂O₇ ceramic is the oxide-ion conductor in an oxygen partial pressure range of 1.0 × 10⁻⁴ to 1.0 atm at all test temperature levels. The grain conductivity, grain-boundary conductivity and total conductivity of (Sm_0.9Gd_0.05Yb_0.05)₂Zr₂O₇ with dual Yb³⁺ + Gd³⁺ doping are higher than those of undoped Sm₂Zr₂O₇ at identical temperature levels.     

Dielectric and magnetic properties of ferrite/poly(vinylidene fluoride) nanocomposites

Particulate composite films of poly(vinylidene fluoride) and CoFe₂O₄ and NiFe₂O₄ were prepared by solvent casting and melt processing. The well-dispersed ferrite nanoparticles nucleate the piezoelectric β-phase of the polymer, but the different ferrites nucleate the whole polymer crystalline phase at different filler concentrations. The macroscopic magnetic and dielectric response of the composites demonstrates a strong dependence on the volume fraction of ferrite nanoparticles, with both magnetization and dielectric constant increasing for increasing filler content. The β-relaxation in the composite samples is similar to the one observed for β-PVDF obtained by stretching. A superparamagnetic behavior was observed for NiFe₂O₄/PVDF composites, whereas CoFe₂O₄/PVDF samples developed a hysteresis cycle with coercivity of 0.3 T.     

Co3O4负载rGO/g-C3N4臭氧光催化降解2,4-二氯苯氧乙酸活性研究

通过简单的水热法制备了Co₃O₄/rGO/g-C₃N₄催化剂,并在可见光照射下用于光催化臭氧氧化降解2,4-二氯苯氧乙酸(2,4-D)。利用XRD, SEM, TEM, XPS, UV-vis DRS, FT-IR和瞬态光电流对样品进行测试表征。研究表明,Co₃O₄, rGO和g-C₃N₄形成异质结后光生电子-空穴(e^--h⁺)对的分离效率,e^-的迁移能力以及光催化臭氧氧化活性都明显提升。此外,0.5Co₃O₄/0.25rGO/GCN对2,4-D具有100%的去除率,并具有最高反应速率(k=0.070 9 min^-1)。经过计算得出光催化臭氧氧化2,4-D的协同因子为3.91,表明光催化和臭氧氧化间具有较好的协同效应。活性组分的捕获实验结果表明h⁺和·OH是光催...