共查询到20条相似文献,搜索用时 46 毫秒
1.
The reduction of NO under cyclic “lean”/“rich” conditions was examined over two model 1 wt.% Pt/20 wt.% BaO/Al 2O 3 and 1 wt.% Pd/20 wt.% BaO/Al 2O 3 NO x storage reduction (NSR) catalysts. At temperatures between 250 and 350 °C, the Pd/BaO/Al 2O 3 catalyst exhibits higher overall NO x reduction activity. Limited amounts of N 2O were formed over both catalysts. Identical cyclic studies conducted with non-BaO-containing 1 wt.% Pt/Al 2O 3 and Pd/Al 2O 3 catalysts demonstrate that under these conditions Pd exhibits a higher activity for the oxidation of both propylene and NO. Furthermore, in situ FTIR studies conducted under identical conditions suggest the formation of higher amounts of surface nitrite species on Pd/BaO/Al 2O 3. The IR results indicate that this species is substantially more active towards reaction with propylene. Moreover, its formation and reduction appear to represent the main pathway for the storage and reduction of NO under the conditions examined. Consequently, the higher activity of Pd can be attributed to its higher oxidation activity, leading both to a higher storage capacity ( i.e., higher concentration of surface nitrites under “lean” conditions) and a higher reduction activity ( i.e., higher concentration of partially oxidized active propylene species under “rich” conditions). The performance of Pt and Pd is nearly identical at temperatures above 375 °C. 相似文献
2.
In this work, a kinetic model is constructed to simulate sulfur deactivation of the NO x storage performance of BaO/Al 2O 3 and Pt/BaO/Al 2O 3 catalysts. The model is based on a previous model for NO x storage under sulfur-free conditions. In the present model the storage of NO x is allowed on two storage sites, one for complete NO x uptake and one for a slower NO x sorption. The adsorption of SO x is allowed on both of these NO x storage sites and on one additional site which represent bulk storage. The present model is built-up of six sub-models: (i) NO x storage under sulfur-free conditions; (ii) SO 2 storage on NO x storage sites; (iii) SO 2 oxidation; (iv) SO 3 storage on bulk sites; (v) SO 2 interaction with platinum in the presence of H 2; (vi) oxidation of accumulated sulfur compounds on platinum by NO 2. Data from flow reactor experiments are used in the implementation of the model. The model is tested for simulation of experiments for NO x storage before exposure to sulfur and after pre-treatments either with SO 2 + O 2 or SO 2 + H 2. The simulations show that the model is able to describe the main features observed experimentally. 相似文献
3.
A mean field model, for storage and desorption of NO x in a Pt/BaO/Al 2O 3 catalyst is developed using data from flow reactor experiments. This relatively complex system is divided into five smaller sub-systems and the model is divided into the following steps: (i) NO oxidation on Pt/Al 2O 3; (ii) NO oxidation on Pt/BaO/Al 2O 3; (iii) NO x storage on BaO/Al 2O 3; (iv) NO x storage on Pt/BaO/Al 2O 3 with thermal regeneration and (v) NO x storage on Pt/BaO/Al 2O 3 with regeneration using C 3H 6. In this paper, we focus on the last sub-system. The kinetic model for NO x storage on Pt/BaO/Al 2O 3 was constructed with kinetic parameters obtained from the NO oxidation model together with a NO x storage model on BaO/Al 2O 3. This model was not sufficient to describe the NO x storage experiments for the Pt/BaO/Al 2O 3, because the NO x desorption in TPD experiments was larger for Pt/BaO/Al 2O 3, compared to BaO/Al 2O 3. The model was therefore modified by adding a reversible spill-over step. Further, the model was validated with additional experiments, which showed that NO significantly promoted desorption of NO x from Pt/BaO/Al 2O 3. To this NO x storage model, additional steps were added to describe the reduction by hydrocarbon in experiments with NO 2 and C 3H 6. The main reactions for continuous reduction of NO x occurs on Pt by reactions between hydrocarbon species and NO in the model. The model is also able to describe the reduction phase, the storage and NO breakthrough peaks, observed in experiments. 相似文献
4.
A multi-component NO x-trap catalyst consisting of Pt and K supported on γ-Al 2O 3 was studied at 250 °C to determine the roles of the individual catalyst components, to identify the adsorbing species during the lean capture cycle, and to assess the effects of H 2O and CO 2 on NO x storage. The Al 2O 3 support was shown to have NO x trapping capability with and without Pt present (at 250 °C Pt/Al 2O 3 adsorbs 2.3 μmols NO x/m 2). NO x is primarily trapped on Al 2O 3 in the form of nitrates with monodentate, chelating and bridged forms apparent in Diffuse Reflectance mid-Infrared Fourier Transform Spectroscopy (DRIFTS) analysis. The addition of K to the catalyst increases the adsorption capacity to 6.2 μmols NO x/m 2, and the primary storage form on K is a free nitrate ion. Quantitative DRIFTS analysis shows that 12% of the nitrates on a Pt/K/Al 2O 3 catalyst are coordinated on the Al 2O 3 support at saturation. When 5% CO2 was included in a feed stream with 300 ppm NO and 12% O2, the amount of K-based nitrate storage decreased by 45% after 1 h on stream due to the competition of adsorbed free nitrates with carboxylates for adsorption sites. When 5% H2O was included in a feed stream with 300 ppm NO and 12% O2, the amount of K-based nitrate storage decreased by only 16% after 1 h, but the Al2O3-based nitrates decreased by 92%. Interestingly, with both 5% CO2 and 5% H2O in the feed, the total storage only decreased by 11%, as the hydroxyl groups generated on Al2O3 destabilized the K–CO2 bond; specifically, H2O mitigates the NOx storage capacity losses associated with carboxylate competition. 相似文献
5.
Differences in the NO x storage-reduction (NSR) behavior of Pt/Ba/CeO 2 and Pt/Ba/Al 2O 3 have been identified and traced to their different chemical and structural properties. The results show that Pt/Ba/CeO 2 exhibits inferior NO x storage and, particularly, reduction (regeneration) activity compared to the Al 2O 3 supported catalyst. The incomplete reduction of the stored NO x-species in Pt/Ba/CeO 2 seems to be caused by a faster and more profound reoxidation of Pt particles during the lean period as evidenced by in situ X-ray absorption spectroscopy. Interestingly, the reduction activity could be significantly improved by a pre-reduction step at mild conditions. Exposure of the Pt/Ba/CeO 2 catalyst to reducing H 2 atmosphere in the temperature range 300–500 °C lead to a moderate increase of Pt particle size which beneficially influenced the regeneration activity. In contrast, pre-reduction at temperatures above 500 °C was unfavorable and resulted in a severe decrease of the regeneration activity, probably due to migration of the partially reduced CeO 2 onto the surface of Pt particles. 相似文献
6.
For the first time, the coupling of fast transient kinetic switching and the use of an isotopically labelled reactant ( 15NO) has allowed detailed analysis of the evolution of all the products and reactants involved in the regeneration of a NO x storage reduction (NSR) material. Using realistic regeneration times (ca. 1 s) for Pt, Rh and Pt/Rh-containing Ba/Al 2O 3 catalysts we have revealed an unexpected double peak in the evolution of nitrogen. The first peak occurred immediately on switching from lean to rich conditions, while the second peak started at the point at which the gases switched from rich to lean. The first evolution of nitrogen occurs as a result of the fast reaction between H 2 and/or CO and NO on reduced Rh and/or Pt sites. The second N 2 peak which occurs upon removal of the rich phase can be explained by reaction of stored ammonia with stored NO x, gas phase NO x or O 2. The ammonia can be formed either by hydrolysis of isocyanates or by direct reaction of NO and H 2. The study highlights the importance of the relative rates of regeneration and storage in determining the overall performance of the catalysts. The performance of the monometallic 1.1%Rh/Ba/Al2O3 catalyst at 250 and 350 °C was found to be dependent on the rate of NOx storage, since the rate of regeneration was sufficient to remove the NOx stored in the lean phase. In contrast, for the monometallic 1.6%Pt/Ba/Al2O3 catalyst at 250 °C, the rate of regeneration was the determining factor with the result that the amount of NOx stored on the catalyst deteriorated from cycle to cycle until the amount of NOx stored in the lean phase matched the NOx reduced in the rich phase. On the basis of the ratio of exposed metal surface atoms to total Ba content, the monometallic 1.6%Pt/Ba/Al2O3 catalyst outperformed the Rh-containing catalysts at 250 and 350 °C even when CO was used as a reductant. 相似文献
7.
Catalytic performance of Sn/Al 2O 3 catalysts prepared by impregnation (IM) and sol–gel (SG) method for selective catalytic reduction of NO x by propene under lean burn condition were investigated. The physical properties of catalyst were characterized by BET, XRD, XPS and TPD. The results showed that NO 2 had higher reactivity than NO to nitrogen, the maximum NO conversion was 82% on the 5% Sn/Al 2O 3 (SG) catalyst, and the maximum NO 2 conversion reached nearly 100% around 425 °C. Such a temperature of maximum NO conversion was in accordance with those of NO x desorption accompanied with O 2 around 450 °C. The activity of NO reduction was enhanced remarkably by the presence of H 2O and SO 2 at low temperature, and the temperature window was also broadened in the presence of H 2O and SO 2, however the NO x desorption and NO conversion decreased sharply on the 300 ppm SO 2 treated catalyst, the catalytic activity was inhibited by the presence of SO 2 due to formation of sulfate species (SO 42−) on the catalysts. The presence of oxygen played an essential role in NO reduction, and the activity of the 5% Sn/Al 2O 3 (SG) was not decreased in the presence of large oxygen. 相似文献
8.
The release and reduction of NO x in a NO x storage-reduction (NSR) catalyst were studied with a transient reaction analysis in the millisecond range, which was made possible by the combination of pulsed injection of gases and time resolved time-of-flight mass spectrometry. After an O 2 pulse and a subsequent NO pulse were injected into a pellet of the Pt/Ba/Al 2O 3 catalyst, the time profiles of several gas products, NO, N 2, NH 3 and H 2O, were obtained as a result of the release and reduction of NO x caused by H 2 injection. Comparing the time profiles in another analysis, which were obtained using a model catalyst consisting of a flat 5 nmPt/Ba(NO 3) 2/cordierite plate, the release and reduction of NO x on Pt/Ba/Al 2O 3 catalyst that stored NO x took the following two steps; in the first step NO molecules were released from Ba and in the second step the released NO was reduced into N 2 by H 2 pulse injection. When this H 2 pulse was injected in a large amount, NO was reduced to NH 3 instead of N 2. A only small amount of H2O was detected because of the strong affinity for alumina support. We can analyze the NOx regeneration process to separate two steps of the NOx release and reduction by a detailed analysis of the time profiles using a two-step reaction model. From the result of the analysis, it is found that the rate constant for NOx release increased as temperature increase. 相似文献
9.
The NO x storage-reduction catalysis under oxidizing conditions in the presence of SO 2 has been investigated on Pt/Ba/Fe/Al 2O 3, Pt/Ba/Co/Al 2O 3, Pt/Ba/Ni/Al 2O 3, and Pt/Ba/Cu/Al 2O 3 catalysts compared with Pt/Ba/Al 2O 3, Pt/Fe/Al 2O 3, Pt/Co/Al 2O 3, Pt/Ni/Al 2O 3, Pt/Cu/Al 2O 3 and Pt/Al 2O 3 catalysts. The NO x purification activity of Pt/Ba/Fe/Al 2O 3 catalyst was the highest of all the catalysts investigated in this paper after an aging treatment. That of the aged Pt/Ba/Co/Al 2O 3 and Pt/Ba/Ni/Al 2O 3 catalysts was essentially the same as that of the aged Pt/Ba/Al 2O 3 catalyst, while that of the aged Pt/Ba/Cu/Al 2O 3 and Pt/Cu/Al 2O 3 catalysts was substantially lower than the others. The Fe-compound on the aged Pt/Ba/Fe/Al2O3 catalyst has played a role in decreasing the sulfur content on the catalyst after exposure to simulated reducing gas compared with the Pt/Ba/Al2O3 catalyst without the Fe-compound. XRD and EDX show that the Fe-compound inhibits the growth in the size of BaSO4 particles formed on the Pt/Ba/Fe/Al2O3 catalyst under oxidizing conditions in the presence of SO2 and promotes the decomposition of BaSO4 and desorption of the sulfur compound under reducing conditions. 相似文献
10.
In this paper, the effect of CO 2 and H 2O on NO x storage and reduction over a Pt–Ba/γ-Al 2O 3 (1 wt.% Pt and 30 wt.% Ba) catalyst is shown. The experimental results reveal that in the presence of CO 2 and H 2O, NO x is stored on BaCO 3 sites only. Moreover, H 2O inhibits the NO oxidation capability of the catalyst and no NO 2 formation is observed. Only 16% of the total barium is utilized in NO storage. The rich phase shows 95% selectivity towards N 2 as well as complete regeneration of stored NO. In the presence of CO 2, NO is oxidized into NO 2 and more NO x is stored as in the presence of H 2O, resulting in 30% barium utilization. Bulk barium sites are inactive in NO x trapping in the presence of CO 2·NH 3 formation is seen in the rich phase and the selectivity towards N 2 is 83%. Ba(NO 3) 2 is always completely regenerated during the subsequent rich phase. In the absence of CO 2 and H 2O, both surface and bulk barium sites are active in NO x storage. As lean/rich cycling proceeds, the selectivity towards N 2 in the rich phase decreases from 82% to 47% and the N balance for successive lean/rich cycles shows incomplete regeneration of the catalyst. This incomplete regeneration along with a 40% decrease in the Pt dispersion and BET surface area, explains the observed decrease in NO x storage. 相似文献
11.
The effect of different reducing agents (H 2, CO, C 3H 6 and C 3H 8) on the reduction of stored NO x over PM/BaO/Al 2O 3 catalysts (PM = Pt, Pd or Rh) at 350, 250 and 150 °C was studied by the use of both NO 2-TPD and transient reactor experiments. With the aim of comparing the different reducing agents and precious metals, constant molar reduction capacity was used during the reduction period for samples with the same molar amount of precious metal. The results reveal that H 2 and CO have a relatively high NO x reduction efficiency compared to C 3H 6 and especially C 3H 8 that does not show any NO x reduction ability except at 350 °C over Pd/BaO/Al 2O 3. The type of precious metals affects the NO x storage-reduction properties, where the Pd/BaO/Al 2O 3 catalyst shows both a high storage and a high reduction ability. The Rh/BaO/Al 2O 3 catalyst shows a high reduction ability but a relatively low NO x storage capacity. 相似文献
12.
NO x sorption and reduction capacities of 12-tungstophosphoric acid hexahydrate (H 3PW 12O 40·6H 2O, HPW) were measured under representative alternating conditions of lean and rich exhaust-type gas mixture. Under lean conditions, the sorption of NO x is large and is equivalent to 37 mg of NO x/g HPW. Although a part of these NO x remains unreduced, HPW is able to reduce some of the NO x to produce N 2 by a reaction between the sorbed NO 2 and hydrocarbon (HC), but this process is slow. The addition of 1% Pt affects strongly the chemical behaviour occurring during the course of a rich operation. The NO desorption observed at the beginning of the rich phase is strongly accelerated. The direct correlation between NO 2 consumption and CO 2 production shows that the principal pathway is the reaction CO+NO 2→CO 2+NO. In a mixture of reducing gas (CO, HC, H 2), the competition is strongly in favour of CO though in its absence the reaction observed was the hydrogenation of propene to propane. 相似文献
13.
A method to quantify DRIFT spectral features associated with the in situ adsorption of gases on a NO x adsorber catalyst, Pt/K/Al 2O 3, is described. To implement this method, the multicomponent catalyst is analysed with DRIFT and chemisorption to determine that under operating conditions the surface comprised a Pt phase, a pure γ-Al 2O 3 phase with associated hydroxyl groups at the surface, and an alkalized-Al 2O 3 phase where the surface –OH groups are replaced by –OK groups. Both DRIFTS and chemisorption experiments show that 93–97% of the potassium exists in this form. The phases have a fractional surface area of 1.1% for the 1.7 nm-sized Pt, 34% for pure Al 2O 3 and 65% for the alkalized-Al 2O 3. NO 2 and CO 2 chemisorption at 250 °C is implemented to determine the saturation uptake value, which is observed with DRIFTS at 250 °C. Pt/Al 2O 3 adsorbs 0.087 μmol CO 2/m 2and 2.0 μmol NO 2/m 2, and Pt/K/Al 2O 3 adsorbs 2.0 μmol CO 2/m 2and 6.4 μmol NO 2/m 2. This method can be implemented to quantitatively monitor the formation of carboxylates and nitrates on Pt/K/Al 2O 3 during both lean and rich periods of the NO x adsorber catalyst cycle. 相似文献
14.
The selective catalytic reduction (SCR) of nitrogen oxides (NO x) by propane in the presence of H 2 on sol–gel prepared Ag/Al 2O 3 catalysts (0.5–5 wt.% Ag) was investigated. It was confirmed that hydrocarbon-assisted SCR of NO x is remarkably enhanced by co-feeding hydrogen to a lean exhaust gas mixture (λ>1), attaining considerable activity within a wide temperature window (470–825 K). The samples had marginal activity at 575 K without co-fed H 2, but achieved up to 60% NO x conversion in the presence of H 2 at a space velocity of 30,000 h −1. NO 2 as NO x feed component is not converted to N 2 by C 3H 8 to a substantial extent under lean conditions. This points to an activation route of NO through direct conversion to adsorbed nitrite/nitrate or to a dissociation of NO over Ag 0, formed through short-term reduction by H 2. The nature of Ag species was characterized by X-ray diffraction, temperature-programmed reduction, pulse thermoanalytical measurements, electron microscopy and FTIR spectroscopy. It could be shown that Ag 2O nano-sized clusters are predominantly present on all samples, whereas formation of silver aluminate could not be confirmed. Nano-sized Ag 2O clusters can reversibly be reduced/reoxidized by H 2. A silver loading higher than 2 wt.% leads to a part of Ag 2O particles, which are thermally decomposed during calcination at 800 K or higher. The catalytic role of this metallic silver is still unclear. Formal kinetic analysis of catalytic data revealed that the activation energy of the overall reaction is significantly lowered in the presence of H 2. The presence of water does not change the activation energy. It is concluded that hydrogen reduces the nano-sized Ag 2O clusters to Ag 0 on a short-term scale. Zero-valent silver promotes a dissociation pathway of NO x conversion. The fact that more oxidized ad-species (nitrite/nitrate) are observed in the presence of H 2 is attributed to a dissociative activation of gas-phase oxygen on Ag 0. 相似文献
15.
The effect of the Pd addition method into the fresh Pd/(OSC + Al 2O 3) and (Pd + OSC)/Al 2O 3 catalysts (OSC material = Ce xZr 1−xO 2 mixed oxides) was investigated in this study. The CO + NO and CO + NO + O 2 model reactions were studied over fresh and aged catalysts. The differences in the fresh catalysts were insignificant compared to the aged catalysts. During the CO + NO reaction, only small differences were observed in the behaviour of the fresh catalysts. The light-off temperature of CO was about 20 °C lower for the fresh Pd/(OSC + Al 2O 3) catalyst than for the fresh (Pd + OSC)/Al 2O 3 catalyst during the CO + NO + O 2 reaction. For the aged catalysts lower NO reduction and CO oxidation activities were observed, as expected. Pd on OSC-containing alumina was more active than Pd on OSC material after the agings. The activity decline is due to a decrease in the number of active sites on the surface, which was observed as a larger Pd particle size for aged catalysts than for fresh catalysts. In addition, the oxygen storage capacity of the aged Pd/(OSC + Al 2O 3) catalyst was higher than that of the (Pd + OSC)/Al 2O 3 catalyst. 相似文献
16.
Conversion of NO x with reducing agents H 2, CO and CH 4, with and without O 2, H 2O, and CO 2 were studied with catalysts based on MOR zeolite loaded with palladium and cerium. The catalysts reached high NO x to N 2 conversion with H 2 and CO (>90% conversion and N 2 selectivity) range under lean conditions. The formation of N 2O is absent in the presence of both H 2 and CO together with oxygen in the feed, which will be the case in lean engine exhaust. PdMOR shows synergic co-operation between H 2 and CO at 450–500 K. The positive effect of cerium is significant in the case of H 2 and CH 4 reducing agent but is less obvious with H 2/CO mixture and under lean conditions. Cerium lowers the reducibility of Pd species in the zeolite micropores. The catalysts showed excellent stability at temperatures up to 673 K in a feed with 2500 ppm CH 4, 500 ppm NO, 5% O 2, 10% H 2O (0–1% H 2), N 2 balance but deactivation is noticed at higher temperatures. Combining results of the present study with those of previous studies it shows that the PdMOR-based catalysts are good catalysts for NO x reduction with H 2, CO, hydrocarbons, alcohols and aldehydes under lean conditions at temperatures up to 673 K. 相似文献
17.
Selective catalytic reduction of NO x by C 3H 6 in the presence of H 2 over Ag/Al 2O 3 was investigated using in situ DRIFTS and GC–MS measurements. The addition of H 2 promoted the partial oxidation of C 3H 6 to enolic species, the formation of –NCO and the reactions of enolic species and –NCO with NO x on Ag/Al 2O 3 surface at low temperatures. Based on the results, we proposed reaction mechanism to explain the promotional effect of H 2 on the SCR of NO x by C 3H 6 over Ag/Al 2O 3 catalyst. 相似文献
18.
A highly dispersed Pt/Al 2O 3 catalyst was used for the selective catalytic reduction of NO x using propene (HC-SCR). Contact with the reaction gas mixture led to a significant activation of the catalyst at temperatures above 523 K. According to CO chemisorption data and HRTEM analysis, Pt particles on the activated catalyst had sintered. The redox behavior of the fresh and sintered catalysts was investigated using Multitrack, a TAP-like pulse reactor. If Pt particles on the catalyst are highly dispersed (average size below 2 nm), only a small part (10%) of the total number of Pt surface sites as determined by CO chemisorption (Pt surf) participates in H 2/O 2 redox cycles (Pt surf,redox) in Multitrack conditions. For a sintered catalyst, with an average particle size of 2.7 nm, the number of Pt surf and Pt surf,redox sites are in good agreement. Similar results were obtained for both catalysts using NO as the oxidant. The low number of Pt surf,redox sites on highly dispersed Pt/Al 2O 3 is explained by the presence of a kinetically more stable—probably ionic—form of Pt---O bonds on all surface sites of the smaller Pt particles, including corner, edge and terrace sites. When the average particle size shifts to 2.7 nm, the kinetic stability of all Pt---O bonds is collectively decreased, enabling the participation of all Pt surface sites in the redox cycles. A linear correlation between the NOx conversion in HC-SCR, and the amount of Ptsurf,redox was found. This suggests that redox-active Pt sites are necessary for catalytic activity. In addition, the correlation could be significantly improved by assuming that Ptsurf,terrace sites of the particles larger than 2.7 nm are mainly responsible for HC-SCR activity in steady state conditions. Implications of these results for the pathway of HC-SCR over Pt catalysts are discussed. 相似文献
19.
Performance of NO x traps after high-temperature treatments in different redox environments was studied. Two types of treatments were considered: aging and pretreatment. Lean and rich agings were examined for a model NO x trap, Pt–Ba/Al 2O 3. These were done at 950 °C for 3 h, in air and in 1% H 2/N 2, respectively. Lean aging had a severe impact on NO x trap performance, including HC and CO oxidation, and NH 3 and N 2O formation. Rich aging had minimal impact on performance, compared to fresh/degreened performance. Deactivation from lean aging was essentially irreversible due to Pt sintering, but Pt remained dispersed with the rich aging. Pretreatments were examined for a commercially feasible fully formulated NO x trap and two model NO x traps, Pt–Ba/Al 2O 3 and Pt–Ba–Ce/Al 2O 3. Pretreatments were done at 600 °C for 10 min, and used feed gas that simulated diesel exhaust under several conditions. Lean pretreatment severely suppressed NO x, HC, CO, NH 3 and N 2O activities for the ceria-containing NO x traps, but had no impact on Pt–Ba/Al 2O 3. Subsequently, a relatively mild rich pretreatment reversed this deactivation, which appears to be due to a form of Pt–ceria interaction, an effect that is well known from early work on three-way catalysts. Practical applications of results of this work are discussed with respect to NO x traps for light-duty diesel vehicles. 相似文献
20.
Pt–Ba–Al 2O 3 active and selective for NO x storage and selective reduction to N 2 has been prepared and tested. Characterization of the parent Al 2O 3, Pt–Al 2O 3 and Ba–Al 2O 3 materials, as well as of Pt–Ba–Al 2O 3 catalyst in the oxidized, reduced and sulphated state has been performed by FT-IR spectroscopy of low-temperature adsorbed carbon monoxide and of adsorbed acetonitrile. XRD, TEM and XPS analyses have also been performed. Evidence for the predominance of Ba species, which are highly dispersed on the alumina support surface, and may be carbonated or sulphated, has been provided. Competitive interaction of Pt and Ba species with the surface sites of alumina has also been found. 相似文献
|