Composite stratified anti‐disturbance control for a class of MIMO discrete‐time systems with nonlinearity

Anti‐disturbance control and estimation problem are investigated for nonlinear system subject to multi‐source disturbances. The disturbances classified model is proposed based on the error and noise analysis of priori knowledge. The disturbance observers are constructed separately from the controller design to estimate the disturbance with partial known information. By integrating disturbance‐observer‐based control with discrete‐time sliding‐mode control (DSMC), a novel type of composite stratified anti‐disturbance control scheme is presented for a class of multiple‐input–multiple‐output discrete‐time systems with known and unknown nonlinear dynamics, respectively. Simulations for a flight control system are given to demonstrate the effectiveness of the results compared with the previous schemes. Copyright © 2011 John Wiley & Sons, Ltd.     

High‐order sliding‐mode observer–based input‐output linearization

The problem of output control in multiple‐input–multiple‐output nonlinear systems is addressed. A high‐order sliding‐mode observer is used to estimate the states of the system and identify the discrepancy between the nominal model and the real plant. The exact and finite‐time estimation may be tackled as long as the system presents the algebraic strong observability property. Thus, a continuous robust input‐output linearization strategy can be obtained with respect to a prescribed output. As a consequence, the closed‐loop dynamics performs robustly to uncertainties/perturbations. To illustrate the advantages of the proposed method, we introduce a study case that demands a robust linear system behavior: the self‐oscillations induced in an underactuated mechanical system through a two‐relay controller. Experiments with an inertial wheel pendulum illustrate the feasibility of the proposed approach.     

Output‐feedback tracking in causal nonminimum‐phase nonlinear systems using higher‐order sliding modes

Asymptotic output‐feedback tracking in a class of causal nonminimum phase uncertain nonlinear systems is addressed via sliding mode techniques. Sliding mode control is proposed for robust stabilization of the output tracking error in the presence of a bounded disturbance. The output reference profile and the unknown input/disturbance are supposed to be described by unknown linear exogenous systems of a given order. Local asymptotic stability of the output tracking error dynamics along with the boundedness of the internal states are proven. The unstable internal states are estimated asymptotically via the proposed multistage observer that is based on the method of extended system center. A higher‐order sliding mode observer/differentiator is used for the exact estimation of the input–output states in a finite time. The bounded disturbance is reconstructed asymptotically. A numerical example illustrates the efficiency of the proposed output‐feedback tracking approach developed for causal nonminimum phase nonlinear systems. Copyright © 2009 John Wiley & Sons, Ltd.     

Sliding mode PI control with backstepping approach for MIMO nonlinear cross‐coupled tank systems

The control of tank systems in industrial applications is an important issue for monitoring the chemical processes involved in the manufacture and delivery of product. The most important reason to control the tank systems is to keep the liquid level in the tanks constant and at the desired level for a specified period of time. In this study, the sliding mode control (SMC) with a repetitive approach called backstepping that is insensitive to uncertainties in system parameters and input disturbances is proposed and experimentally applied to a quadruple, cross‐coupled, uncertain, nonlinear, and multiple‐input/multiple‐output tank system. A proportional‐integral (PI) control is used to reduce the steady‐state error caused by the parameter variations and external noises. The traditional way of introducing PI usually leads to sliding surfaces. In this paper, the PI action is introduced to the control signal. The proposed backstepping sliding mode PI control (BSMPIC) is applied to such a complex tank system for the first time. The experimental results are compared with those of the SMC, sliding mode PI control, and backstepping sliding mode control to see the effect of the proposed BSMPIC on the system. As a result of the comparison, it is observed that less overshoot and tracking error, better tracking performance, and faster rise time in the transient regime is obtained by the BSMPIC.     

Continuous sliding‐mode control for singular systems

Singular systems with matched Lipschitz perturbations and uncertainties are considered in this paper. Since continuous solutions of an impulse‐free singular system require continuous input signals, a two‐step continuous sliding‐mode control strategy to compensate matched Lipschitz perturbations and uncertainties in singular systems is proposed. Our suggested methodology is tested in a singular representation of a DC motor pendulum of relative degree two. The performance of the proposed strategy is assessed by comparing the accuracy, in both cases, with and without considering small noise in the output, obtained through other continuous sliding‐mode control, and reconstruction/compensation of perturbations and uncertainties techniques.     

Global tracking sliding mode control for a class of nonlinear systems via variable gain observer

A novel output‐feedback sliding mode control strategy is proposed for a class of single‐input single‐output (SISO) uncertain time‐varying nonlinear systems for which a norm state estimator can be implemented. Such a class encompasses minimum‐phase systems with nonlinearities affinely norm bounded by unmeasured states with growth rate depending nonlinearly on the measured system output and on the internal states related with the zero‐dynamics. The sliding surface is generated by using the state of a high gain observer (HGO) whereas a peaking free control amplitude is obtained via a norm observer. In contrast to the existing semi‐global sliding mode control solutions available in the literature for the class of plants considered here, the proposed scheme is free of peaking and achieves global tracking with respect to a small residual set. The key idea is to design a time‐varying HGO gain implementable from measurable signals. Copyright © 2010 John Wiley & Sons, Ltd.     

Simplex sliding mode methods for the chattering reduction control of multi-input nonlinear uncertain systems

The simplex sliding mode control method is further developed by considering uncertain control systems non-affine in the control law. In order to reduce chattering effects, a set of integrators is added in the input channels. The augmented system is then controlled by a switching logic based on the simplex control method. As a result, the original control vector turns out to be continuous. A second order sliding mode observer is used when the sliding output is not available. Explicit conditions are identified about systems uncertainties and the simplex geometry in order to guarantee the convergence of the proposed methodology.     

Disturbance observer–based adaptive boundary layer sliding mode controller for a type of nonlinear multiple‐input multiple‐output system

In this paper, a disturbance observer–based adaptive boundary layer sliding mode controller (ABLSMC) is proposed to compensate external disturbance and system uncertainty for a class of output coupled multiple‐input multiple‐output (MIMO) nonlinear systems. To show the effectiveness of the proposed ABLMSC, a traditional adaptive sliding mode controller (ASMC) is also designed. The stability of the closed‐loop system is examined by using the Lyapunov stability approach. The proposed control approach is implemented for a class of nonlinear output coupled MIMO systems. For real‐time validation, a coupled tank system is considered for study. Finally, simulation and real‐time results show that the proposed ABLMSC gives better performance such as reduced chattering and energy efficiency than that of the ASMC and some reported works in the literature.     

Robust control of a family of uncertain nonminimum‐phase systems via continuous‐time and sampled‐data output feedback

The problem of global robust stabilization is studied by both continuous‐time and sampled‐data output feedback for a family of nonminimum‐phase nonlinear systems with uncertainty. The uncertain nonlinear system considered in this paper has an interconnect structure consisting of a driving system and a possibly unstable zero dynamics with uncertainty, ie, the uncertain driven system. Under a linear growth condition on the uncertain zero dynamics and a Lipschitz condition on the driving system, we show that it is possible to globally robustly stabilize the family of uncertain nonminimum‐phase systems by a single continuous‐time or a sampled‐data output feedback controller. The sampled‐data output feedback controller is designed by using the emulated versions of a continuous‐time observer and a state feedback controller, ie, by holding the input/output signals constant over each sampling interval. The design of either continuous‐time or sampled‐data output compensator uses only the information of the nominal system of the uncertain controlled plant. In the case of sampled‐data control, global robust stability of the hybrid closed‐loop system with uncertainty is established by means of a feedback domination method together with the robustness of the nominal closed‐loop system if the sampling time is small enough.     

On the sliding‐mode control of fractional‐order nonlinear uncertain dynamics

This paper deals with applications of sliding‐mode‐based fractional control techniques to address tracking and stabilization control tasks for some classes of nonlinear uncertain fractional‐order systems. Both single‐input and multi‐input systems are considered. A second‐order sliding‐mode approach is taken, in suitable combination with PI‐based design, in the single‐input case, while the unit‐vector approach is the main tool of reference in the multi‐input case. Sliding manifolds containing fractional derivatives of the state variables are used in the present work. Constructive tuning conditions for the control parameters are derived by Lyapunov analysis, and the convergence properties of the proposed schemes are supported by simulation results. Copyright © 2015 John Wiley & Sons, Ltd.     

Robust fault diagnosis and fault‐tolerant control for non‐Gaussian uncertain stochastic distribution control systems

The purpose of fault diagnosis of stochastic distribution control systems is to use the measured input and the system output probability density function to obtain the fault estimation information. A fault diagnosis and sliding mode fault‐tolerant control algorithms are proposed for non‐Gaussian uncertain stochastic distribution control systems with probability density function approximation error. The unknown input caused by model uncertainty can be considered as an exogenous disturbance, and the augmented observation error dynamic system is constructed using the thought of unknown input observer. Stability analysis is performed for the observation error dynamic system, and the H_∞ performance is guaranteed. Based on the information of fault estimation and the desired output probability density function, the sliding mode fault‐tolerant controller is designed to make the post‐fault output probability density function still track the desired distribution. This method avoids the difficulties of design of fault diagnosis observer caused by the uncertain input, and fault diagnosis and fault‐tolerant control are integrated. Two different illustrated examples are given to demonstrate the effectiveness of the proposed algorithm. Copyright © 2016 John Wiley & Sons, Ltd.     

SECOND‐ORDER TERMINAL SLIDING MODE CONTROL OF INPUT‐DELAY SYSTEMS

This paper proposes a second‐order terminal sliding mode control for a class of uncertain input‐delay systems. The input‐delay systems are firstly converted into the input‐delay free systems and further converted into the regular forms. A linear sliding mode manifold is predesigned to represent the ideal dynamics of the system. Another terminal sliding mode manifold surface is presented to drive the linear sliding mode to reach zeros in finite time. In order to eliminate the chattering phenomena, a second‐order sliding mode method is utilized to filter the high frequency switching control signal. The uncertainties of the systems are analysed in detail to show the effect to the systems. The simulation results validate the method presented in the paper.     

Discrete output feedback sliding‐mode control with integral action

This paper presents a novel approach to the problem of discrete time output feedback sliding‐mode control design. The method described applies to uncertain systems (with matched uncertainties) which are not necessarily minimum phase or relative degree one. A new sliding surface is proposed, which is associated with the equivalent control of the output feedback sliding‐mode controller. Design freedom is available to select the sliding surface parameters to produce an appropriate reduced‐order sliding motion. In order for this to be achieved, a static output feedback condition associated with a certain reduced‐order system obtained from the original plant must be solvable. The practicality of the results are demonstrated through the implementation of the controller on a small DC motor test rig. Copyright © 2005 John Wiley & Sons, Ltd.     

SECOND‐ORDER NONSINGULAR TERMINAL SLIDING MODE DECOMPOSED CONTROL OF UNCERTAIN MULTIVARIABLE SYSTEMS

This paper proposes a second‐order nonsingular terminal sliding mode decomposed control method for multivariable linear systems with internal parameter uncertainties and external disturbances. First, the systems are converted into the block controllable form, consisting of an input‐output subsystem and a stable internal dynamic subsystem. A special second‐order non‐singular terminal sliding mode is proposed for the input‐output subsystem. The control law is designed to drive the states of the input‐output subsystem to converge to the equilibrium point asymptotically. Then the states of the stable zero‐dynamics of the system converge to the equilibrium point asymptotically. The method proposed in the paper has advantages for higher‐dimensional multivariable systems, in the sense that it simplifies the design and makes it possible to realize a robust decomposed control. Meanwhile, because of the adoption of the second‐order sliding mode, the control signal is continuous. Simulation results are presented to validate the design.     

Decentralized Sliding Mode Control for Multi‐Input Complex Interconnected Systems Subject to non‐smooth Nonlinearities

Many modern control systems become gradually more complicated and, consequently, the approach to control design approaches is both difficulty and complex. Moreover, if such a complex interconnected system is subjected to non‐smooth nonlinearities in the actuator, then unexpected difficulties, degradation or, even worse, instability will arise in the system performance. Therefore, a new decentralized sliding mode control (DSMC) approach for such a class of complex interconnected systems subjected to non‐smooth (deadzone) nonlinearities is proposed in this paper. Based on sliding mode control (SMC) theory, the proposed DSMC laws guarantee the global reaching condition of the sliding mode in uncertain complex interconnected systems with deadzone nonlinearities, that is, they can ensure that the sliding mode is reached in finite time and with prescribed transient behavior. In the sliding mode, the investigated uncertain complex interconnected system with deadzone nonlinearities in the actuator still are insensitive to system uncertainties and external disturbances. The proposed DSMC laws can work effectively for uncertain complex interconnected systems either with or without deadzone nonlinearities in the actuator. However, this cannot be guaranteed by the traditional DSMC design for systems without input deadzone nonlinearities. Furthermore, the sliding motion can be controlled to converge within a specified exponential speed. Finally, two illustrative examples with a series of computer simulations are presented to demonstrate the effectiveness of the proposed DSMC laws.     

Real‐Time Results for High Order Neural Identification and Block Control Transformation Form Using High Order Sliding Modes

In this paper, real‐time results for a novel continuous‐time adaptive tracking controller algorithm for nonlinear multiple input multiple output systems are presented. The control algorithm includes the combination of a recurrent high order neural network with block control transformation using a high order sliding modes technique as control law. A neural network is used to identify the dynamic plant behavior where a filtered error algorithm is used to train the neural identifier. A decentralized high order sliding mode, named the twisting algorithm, is used to design chattering‐reduced independent controllers to solve the trajectory tracking problem for a robot arm with three degrees of freedom. Stability analyses are given via a Lyapunov approach.     

Sliding Mode ∑‐Δ Modulation Control of the Boost Converter

A switched implementation of average dynamic output feedback laws trough a ∑‐Δ‐modulator, widely known in the classic communications and analog signal encoding literature, not only frees the sliding mode control approach from state measurements and the corresponding synthesis of sliding surfaces in the plant's state space, but it also allows to effectively transfer all desired closed loop features of an uniformly bounded, continuous, average output feedback controller design into the more restrictive discrete‐valued (ON‐OFF) control framework of a switched system. The proposed approach is here used for the input‐output sliding mode stabilization of the “boost” DC‐to‐DC converter. This is achieved by means of a well known passivity based controller but any other output feedback design would have served our purposes. This emphasizes the flexibility of the proposed sliding mode control design implementation through ∑‐Δ‐modulators.     

Robust sliding mode‐based extremum‐seeking controller for reaction systems via uncertainty estimation approach

This paper deals with the design of a robust sliding mode‐based extremum‐seeking controller aimed at the online optimization of a class of uncertain reaction systems. The design methodology is based on an input–output linearizing method with variable‐structure feedback, such that the closed‐loop system converges to a neighborhood of the optimal set point with sliding mode motion. In contrast with previous extremum‐seeking control algorithms, the control scheme includes a dynamic modelling‐error estimator to compensate for unknown terms related with model uncertainties and unmeasured disturbances. The proposed online optimization scheme does not make use of a dither signal or a gradient‐based optimization algorithm. Practical stabilizability for the closed‐loop system around to the unknown optimal set point is analyzed. Numerical experiments for two nonlinear processes illustrate the effectiveness of the proposed robust control scheme. Copyright © 2017 John Wiley & Sons, Ltd.     

Fast terminal sliding‐mode finite‐time tracking control with differential evolution optimization algorithm using integral chain differentiator in uncertain nonlinear systems

This paper presents a fast terminal sliding‐mode tracking control for a class of uncertain nonlinear systems with unknown parameters and system states combined with time‐varying disturbances. Fast terminal sliding‐mode finite‐time tracking systems based on differential evolution algorithms incorporate an integral chain differentiator (ICD) to feedback systems for the estimation of the unknown system states. The differential evolution optimization algorithm using ICD is also applied to a tracking controller, which provides unknown parametric estimation in the limitation of unknown system states for trajectory tracking. The ICD in the tracking systems strengthens the tracking controller robustness for the disturbances by filtering noises. As a powerful finite‐time control effort, the fast terminal sliding‐mode tracking control guarantees that all tracking errors rapidly converge to the origin. The effectiveness of the proposed approach is verified via simulations, and the results exhibit high‐precision output tracking performance in uncertain nonlinear systems.     

ADAPTIVE SLIDING MODE BACKSTEPPING CONTROL OF NONLINEAR SYSTEMS WITH UNMATCHED UNCERTAINTY

This paper considers an adaptive backstepping algorithm for designing the control for a class of nonlinear continuous uncertain processes with disturbances that can be converted to a parametric semi‐strict feedback form. Sliding mode control using a combined adaptive backstepping sliding mode control (SMC) algorithm, is also studied. The algorithm follows a systematic procedure for the design of adaptive control laws for the output tracking of nonlinear systems with matched and unmatched uncertainty.