共查询到18条相似文献,搜索用时 93 毫秒
1.
计算机及通讯技术的发展使通讯系统可以采用多种通讯方式。上层软件必须处理多种情况,增加了程序开发的复杂度。论文给出了一个通用的、可扩充的设计模式DataTransferManager的设计与实现。DataTransferManager模式使用户数据处理与通讯接口分离,增强了软件的灵活性和可移植性;同时提高了代码的可复用性,减少了程序员的工作量。 相似文献
2.
介绍一种基于飞思卡尔MCF5270单片机的电力通讯管理机的设计,同时介绍了其硬件设计和软件设计方案.通过配置软件可方便地配置其所有通讯端口的协议、通讯参数等设置,并可进行远程维护调试。 相似文献
3.
4.
应用短波通讯技术建立无线网络,实现工程机械作业的远程监控,为监控中心实时掌握机械状态提供保证.描述了基于短波通讯技术的军用工程机械远程状态监控系统组成结构,以起重机为例对车载状态监测平台硬件和软件进行了设计,探讨了军用工程机械与监控中心通讯的实现. 相似文献
5.
介绍一种基于PCI总线的点到点远程高速光纤通讯系统,其最大传输速率为400Mbit/s,最大传输距离超过40km。系统设计力求简洁可靠,除了采用硬件自动查错、软件纠错编码外,还采用了命令交互比较、误码重传等多种方法以确保通讯正确无误。本系统特别适用于作为远程实时数据采集、远程实时控制等系统的硬件平台。 相似文献
6.
本文是利用OPC(OLE for Process Control)技术,通过公司现有的以太网,实现了组态王数据与远程WINCC的通讯,解决了不同组态软件之间的远程通讯难题. 相似文献
7.
8.
介绍了电表数据采集系统,它通过工业现场远程抄表集中器,将短距离无线通讯技术和GPRS无线网络通讯技术结合在一起,成功的运用到电力数据远程抄表上,实现了电力数据的实时采集与传输,最后对系统后台软件的设计进行了介绍。 相似文献
9.
10.
11.
12.
针对不具有远程通信功能的传统仪表,提出一种基于HART协议的通信圆卡设计方案,详细介绍了通信圆卡的电路设计;采用该通信圆卡搭建了HART通信仪表系统,并在NCS4000组态软件平台上进行了性能测试。测试结果表明,该通信圆卡可结合端口卡将传统仪表改造成智能仪表,使其具有远程通信和控制功能。 相似文献
13.
为实现对基站监控系统的遥调、遥控和遥信,本文制定了监控系统数据传输协议,设计了基于LabWindows/CVI平台的网络通信软件.在恶劣的网络环境下的测试结果表明,采用该数据传输协议可有效的实现远程多数据的可靠性与稳定性传输. 相似文献
14.
针对工业自动控制中实时远程通讯控制的需求,介绍了一种在Windows环境下利用VC 6.0开发Modem通信软件来实现远程控制的方法,先介绍了用到的关键技术,然后给出了远程控制程序的具体实现。实践证明,这种方法简单而经济可行,软件运行效果良好。 相似文献
15.
The study of communication designs in the context of the Raid system, a robust and adaptable distributed database system for transaction processing, is discussed. Related research work on local interprocess communication, remote interprocess communication, and communication protocols for both local area and wide area networks is briefly summarized. A series of experiments on the performance of the facilities available for building the Raid communication software is described. Raid's communication software, called Raidcomm, has evolved as a result of the knowledge gained both from other systems and from the authors' experiments. Several communication services and mechanisms that can be used to make Raid efficient are identified 相似文献
16.
17.
综述了GEA-2000ARTU中遥信单元的设计与实现。介绍了遥信单元的基本要求、硬件结构及遥信(YX)判断的实现原则。并在此基础上分析了传统遥信单元在处理SOE算法时存在的问题,提出了一种将统一建模语言中的对象状态图策略应用于软件设计的新策略,给出了主程序的动态数据交换过程及程序的具体实现。运行结果表明,该单元完全达到了设计要求。 相似文献
18.
《Journal of Parallel and Distributed Computing》1996,37(1):70-82
Lightweight threads have an important role to play in parallel systems: they can be used to exploit shared-memory parallelism, to mask communication and I/O latencies, to implement remote memory access, and to support task-parallel and irregular applications. In this paper, we address the question of how to integrate threads and communication in high-performance distributed-memory systems. We propose an approach based on global pointer and remote service request mechanisms, and explain how these mechanisms support dynamic communication structures, asynchronous messaging, dynamic thread creation and destruction, and a global memory model via interprocessor references. We also explain how these mechanisms can be implemented in various environments. Our global pointer and remote service request mechanisms have been incorporated in a runtime system called Nexus that is used as a compiler target for parallel languages and as a substrate for higher-level communication libraries. We report the results of performance studies conducted using a Nexus implementation; these results indicate that Nexus mechanisms can be implemented efficiently on commodity hardware and software systems. 相似文献