共查询到20条相似文献,搜索用时 109 毫秒
1.
2.
本文介绍了国内外食品用塑料包装材料在塑料包装材料中所占份额,食品用塑料包装材料用的塑料添加剂的有关法规、卫生性、主要类别和品种以及生物降解塑料用的添加剂. 相似文献
3.
热致液晶聚酯(TLCP)—热塑性塑料(TP)合金是近年开发的新型高性能材料之一。本文介绍了该类合金的流变性能、加工特点、以及组成、温度、剪切速率、拉伸比、加工方式等对力学性能的影响。指出,该合金从性能和成本两方面看,是一种具有良好应用前景的新型高性能材料。 相似文献
4.
记忆性塑料、EVOH高阻隔薄膜、富氧膜等功能塑料。在实践中解决了其它材料不能解决的关键问题,具有研究开发、应用前景。 相似文献
5.
刘绍基 《合成材料老化与应用》1989,(1):24-25
1、经济根据热固性塑料性能的特点,将会愈来愈显得重要。这种加热不熔和具有较高剪切模量和杨氏模量(直到300℃)的热固性塑料,在很多情况下是无法用其他材料代替的。它的低的“冷流”性能(即在静态高压下的蠕变)对于设计工作者来说,也是很重要的。热固性塑料作为阻燃材料使用时,在配方中不需添加含卤素的阻燃剂,因此我们可能看到要重新回头使用热固性塑料。 相似文献
6.
ABS塑料耐热改性研究近况 总被引:5,自引:0,他引:5
<正> ABS塑料是本世纪四十年代开发的一种新型高分子材料,是丙烯腈(AN)、丁二烯(B)、苯乙烯(S)的共聚体系。根据制造方法不同有B型和G型两种树脂。由于它的综合性能良好,因而在机械工业,电气工业、纺织工业、化学工业以及日用商品等方面得到了广泛的应用,主要用作壳体材料。目前国内ABS年耗量在10万吨以 相似文献
7.
可光降解塑料的户外暴露试验方法 总被引:3,自引:0,他引:3
杨逊亦 《合成材料老化与应用》1997,(3):37-41,3
前言作为包装用品和组件在许多消费品中所使用的塑料常常随便丢弃最后成为垃圾。为了解决这种垃圾的问题,已经开发了许多种可光降解的塑料材料可供客户使用,这类材料在日光下暴露时容易发生降解。为了评价这一类塑料材料在日光暴露下降解的速度有多快,有一个统一的试验方法来指导户外暴露的试验方法已有Ito877标准作了详细规定。本标准规定可光降解塑料的具体试验方法,为将会被丢弃成为垃圾的可光降解塑料的试验提供典型的技术条件。由于UV辐射、潮湿时间、温度、大气污染及其它因素有不同,材料在户外暴露的相对耐久性取决于暴露的地… 相似文献
9.
10.
工程塑料低温性能的研究 总被引:1,自引:0,他引:1
研究了低温环境对工程塑料性能的影响,测试了材料在—25℃的低温性能,研究了低温曝晒对材料性能的影响。结果表明低温使材料变硬、变脆,拉伸强度和弯曲强度随温度降低而提高,冲击强度和伸长率随温度降低而下降。与脆化温度较高的相比,脆化温度较低的材料在低温下性能保持率较高。材料经低温曝晒,性能下降更为明显。 相似文献
11.
12.
Lisa Träger Jan Gläsel Marc Scherle Julian Hartmann Ulrich Nieken Bastian J. M. Etzold 《化学工程与技术》2020,43(9):1876-1883
In adsorption heat pumps, the properties of the porous adsorbent and the refrigerant determine the performance. Major parameters for this working pair are the total uptake of the adsorptive, its kinetics, and the heat transfer characteristics. In the technical application despite powdered adsorbents, thin consolidated layers of the adsorbent can be attractive and obtained by a binder-based approach but likely result in competing material properties. Thus, for a process optimization, the accessible parameter space and interdependencies have to be known and were deduced in this work for model porous carbons (carbide-derived carbons derived from TiC and ZrC) and methanol as well as the addition of different amounts of boron nitride, silver, and graphite as heat-conductive agents and the use of two binders. 相似文献
13.
14.
针对超过800℃条件下使用的高温隔热涂料,从涂料的填料入手并利用聚氨酯泡沫塑料作辅助隔热层,使其保温隔热性能得到改进和提高,在一定条件下满足因产品升级而对保温隔热性能提高的要求,通过中空填料的运用和高温隔热涂料+聚氨酯泡沫塑料的复合隔热涂层,提高了耐高温隔热涂料的保温隔热性能,延长保温隔热涂料的有效隔热时间。 相似文献
15.
16.
17.
基于传热学理论,对挤出成型塑料管材的冷却过程进行了分析并建立了数学模型。引入聚合物的比热容和热导率对温度的依赖关系,运用有限差分数值方法,求解变物性参数条件下一维非稳态传热方程,模拟了塑料管材在定型冷却过程中的温度场,并由此确定冷却段的合理长度。 相似文献
18.
19.
介绍一种综合性能优良的酚醛注射塑料配方、工艺及特性。该塑料耐热、抗冲、耐燃、电绝缘性好,且注射工艺性好,应用面广。 相似文献
20.
Jim H. Song 《乙烯基与添加剂工艺杂志》1996,2(3):221-223
Glass fiber reinforcement usually gives substantial improvement in some key physical properties of plastics materials, such as heat resistance and stiffness (modulus), but at the expense of impact and flow (processability) properties. Upon recycling, however, we observe the reverse phenomenon. The key consideration of the recyclability of glass reinforced plastics is usually based on how much the key properties of glass reinforced materials are changed during a given recycling period. The assessment of the key physical properties of materials—heat resistance, impact, and stiffness—before and after recycling involves time-consuming and expensive molding testing processes. This paper demonstrates how those three properties of glass reinforced plastics materials before and after recycling can be determined by a single dynamic mechanical thermal analysis (DMTA) test, thus greatly simplifying the key property assessment work in a recyclability study of glass reinforced plastics. 相似文献