Development of piroxicam sensor based on molecular imprinted polymer-modified carbon paste electrode

A new voltammetric sensor for piroxicam measurement is introduced. A piroxicam-selective molecularly imprinted polymer (MIP) and a non-imprinted polymer (NIP) were synthesized in a non-covalent approach using methacrylic acid (MAA) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as cross-linking monomer via a free radical polymerization and then was used for carbon paste (CP) electrode preparation. The MIP, embedded in the carbon paste electrode, functioned as a selective recognition element and pre-concentrator agent for piroxicam determination. The prepared electrode was used for piroxicam measurement via a three-step procedure including analyte extraction in the electrode, electrode washing and electrochemical measurement of piroxicam. The MIP–CP electrode showed good recognition ability in comparison to NIP–CP. Some parameters affecting sensor response were optimized. Under optimum conditions the oxidation peak current was proportional to piroxicam concentration over the range 2–190 and 190–2500 nM. The detection limit was found to be 0.5 nM. This sensor has been successfully applied for the determination of piroxicam in pharmaceutical formulations and serum samples.     

Ligand exchange based paraoxon imprınted QCM sensor

In the present work, a paraoxon imprinted QCM sensor has been developed for the determination of paraoxon based on the modification of paraoxon imprinted film onto a quartz crystal combining the advantages of high selectivity of the piezoelectric microgravimetry using MIP film technique and high sensitivity of QCM detection. The paraoxon selective memories have formed on QCM electrode surface by using a new metal–chelate interaction based on pre-organized monomer and the paraoxon recognition activity of these molecular memories was investigated. Molecular imprinted polymer (MIP) film for the detection of paraoxon was developed and the analytical performance of paraoxon imprinted sensor was studied. The molecular imprinted polymer were characterized by FTIR measurements. Paraoxon imprinted sensor was characterized with AFM and ellipsometer. The study also includes the measurement of binding interaction of paraoxon imprinted quartz crystal microbalance (QCM) sensor, selectivity experiments and analytical performance of QCM electrode. The detection limit and the affinity constant (K_affinity) were found to be 0.06 μM and 2.25 × 10⁴ M^? 1 for paraoxon [MAAP–Cu(II)–paraoxon] based thin film, respectively. Also, it has been observed that the selectivity of the prepared paraoxon imprinted sensor is high compared to a similar chemical structure which is parathion.     

Ag/PANI/GCE电极的制备及对NO2-的电化学检测

亚硝酸盐是水中最常见的污染物之一,其检测长期以来一直是国内外研究的热点问题。制备了聚苯胺载银修饰玻碳电极(Ag/PANI/GCE)并将其应用于水中亚硝酸根的电化学检测。初步研究了亚硝酸根在电极表面的电化学行为的影响因素,并分析了所制备电极材料检测亚硝酸根的灵敏度、稳定性以及抗干扰性能。结果显示,所制备的Ag/PANI/GCE电极材料的电化学稳定性好,可以对水中的亚硝酸根浓度进行有效的检测,同时具有稳定性好、灵敏度较高、抗干扰性能强等优势,具有较高的研究价值和较好的应用前景。     

导电分子印迹膜化学修饰电极的制备及其对胭脂红的电化学检测

报道了一种聚丙烯酰胺(PAAM)-植酸(PA)-聚多巴胺(PDA)导电分子印迹膜(PAAM-PA-PDA MIP)化学修饰电极的制备、表征及其在电化学定量检测食品添加剂胭脂红(P4R)中的应用。即通过原位电聚合和碱液洗脱的方法在玻碳电极(GCE)表面制得具有分子识别作用的导电分子印迹膜(PAAM-PA-PDA MIP)化学修饰电极,并利用SEM、循环伏安法(CV)及交流阻抗法(EIS)对该导电分子印迹膜化学修饰电极的表面形貌和电化学性能进行表征。研究结果表明该方法所制备的导电分子印迹膜化学修饰电极具有良好的电化学检测性能和应用前景,其对P4R的线性检测区间为10~200 μmol/L,灵敏度为0.085 A/mol/L,检测限可达23.6 nmol/L,并可有效地应用于P4R实际样品的分析检测。      

Electrochemical sensor for detecting ultratrace nitroaromatic compounds using mesoporous SiO2-modified electrode

An electrochemical sensor for ultratrace nitroaromatic compounds (NACs) using mesoporous SiO2 of MCM-41 as sensitive materials is reported. MCM-41 was synthesized and characterized by scanning electron microscope, transmission electron microscopy, and small-angle X-ray diffraction. Glassy carbon electrodes modified with MCM-41 show high sensitivity for cathodic voltammetric detection of NACs (including 2,4,6-trinitrotoluene (TNT), 1,3,5-trinitrobenzene (TNB), 2,4-dinitrotoluene, and 1,3-dinitrobenzene) down to the nanomolar level. The high sensitivity is attributed to the strong adsorption of NACs by MCM-41 and large surface area of the working electrode resulting from MCM-41 modification. The voltammetric response is fast, and the detection of NACs can be finished within 14 s. SiO2 nanospheres were similarly used to modify glassy carbon electrodes for electrochemical detection of TNT and TNB. The detection limit of SiO2 nanosphere-modified electrodes is lower than that of MCM-41-modified electrodes, possibly due to the smaller surface area of SiO2 nanospheres than mesoporous MCM-41. The results show mesoporous SiO2-modified glassy carbon electrodes, particularly MCM-41-modified electrodes, open new opportunities for fast, simple, and sensitive field analysis of NACs.     

Amperometric sensors for simultaneous superoxide and hydrogen peroxide detection

A two-channel sensor capable of almost instantaneous simultaneous detection of superoxide radical and hydrogen peroxide in the concentration range 10(-)(7)-10(-)(4) M is very important for understanding of a number of rapid kinetics processes. A glassy carbon working microelectrode covered by an electrodeposited polypyrrole/horseradish peroxidase (PPy/HRP) membrane was employed as a H(2)O(2) sensor. Another glassy carbon microelectrode covered by a composite membrane of an inside layer of PPy/HRP and an outside layer of superoxide dismutase was employed as a working electrode for superoxide detection. These two working electrodes with Pt counter and tungsten oxide (WO(3)) reference electrodes were contained in one 6 mm diameter Teflon cylinder. Simultaneous measurements were performed at a potential of -60 mV (vs WO(3) reference, pH 5.1). Additional sensor characterization was performed for pH 5.1-9.0. Superoxide sensor behavior as a function of membrane deposition conditions and coating time is reported. Sensors' mutual influence, selectivity, response times, linearity, stability, and sensitivity for hydrogen peroxide and superoxide are presented and discussed. A mathematical model of sensors' responses is proposed, with model calculation corresponding to experiment within 10%.     

Paraoxon imprinted biopolymer based QCM sensor

In this study, a novel quartz crystal microbalance (QCM) based on the modification of paraoxon imprinted polymer (TCM-Cd(II)-paraoxon) film onto a quartz crystal sensor has been developed for the determination of paraoxon. The sensor is based on a molecular imprinted polymer (MIP) which can be synthesized using paraoxon as a template molecule, Thiourea Modified Chitosan-Cd(II) (TCM-Cd(II)) as the metal-chelate monomer, ephychlorohydrin as a crosslinking agent. The MIP particles have been characterized by FTIR measurements and QCM sensor has characterized using AFM and ellipsometer. The performance of the paraoxon imprinted sensor has indicated that a selective and sensitive paraoxon imprinted sensor could be fabricated. The sensor is able to discriminate paraoxon in solution owing to the specific binding of the imprinted sites. The obtained paraoxon imprinted sensor has 0.02–1 μM linear range and low detection limit (0.02 μM). The selectivity studies have shown that the selectivity of prepared paraoxon imprinted sensor has found as being very high in the presence of parathion which is similar in structure with paraoxon. The paraoxon imprinted sensor has been repeatedly used for more than 7 months in many continuous experiments.     

Direct electrochemistry and electrocatalytic activity of cytochrome c covalently immobilized on a boron-doped nanocrystalline diamond electrode

Cytochrome c (Cyt c) was covalently immobilized on a boron-doped nanocrystalline diamond (BDND) electrode via surface functionalization with undecylenic acid methyl ester and subsequent removal of the protecting ester groups to produce a carboxyl-terminated surface. Cyt c-modified BDND electrode exhibited a pair of quasi-reversible and well-defined redox peaks with a formal potential (E(0)) of 0.061 V (vs Ag/AgCl) in 0.1 M phosphate buffer solution (pH 7.0) and a surface-controlled process with a high electron transfer constant (ks) of 5.2 +/- 0.6 s(-1). The electrochemical properties of as-deposited and Cyt c-modified boron-doped microcrystalline diamond (BDMD) electrodes were also studied for comparison. Investigation of the electrocatalytic activity of the Cyt c-modified BDND electrode toward hydrogen peroxide (H2O2) revealed a rapid amperometric response (5 s). The linear range of response to H2O2 concentration was from 1 to 450 microM, and the detection limit was 0.7 microM at a signal-to-noise ratio of 3. The stability of the Cyt c-modified BDND electrode, in comparison with that of the BDMD and glassy carbon counterpart electrodes, was also evaluated.     

Fabrication and application of poly(alizarin red S)-carbon nanotubes composite film based nitrite sensor

In this work, a novel electrochemical nitrite sensor for sensitive determination of nitrite based on poly(alizarin red S)-multi-wall carbon nanotubes (PARS-MWNTs) composite film on the glassy carbon electrode was described. The surface morphologies of different electrodes were characterized by scanning electron microscopy. Cyclic voltammetry, chronocoulometry and linear sweep voltammetry were used to investigate the electrochemical response and oxidation mechanism of nitrite at the PARS-MWNTs composite film based sensor. The experimental parameters were optimized, such as electropolymerization pH value, film thickness and detection pH value et al. Under optimal working conditions, the oxidation peak current of nitrite linearly increased with its concentration in the range of 30 nM to 1.1 mM with a low detection limit of 2 nM. The PARS-MWNTs composite film based nitrite sensor was applied to the determination of nitrite in sausage, and the good recovery indicated that it may have practical applications in nitrite monitoring system.     

用单壁纳米碳管制备葡萄糖生物传感器的研究

以单壁纳米碳管为代表材料,对利用纳米碳管制备葡萄糖生物传感器中纳米碳管的作用和纳米碳管修饰电极的方法、酶的固定化方法及电极种类等因素对传感器性能的影响进行了研究.研究结果表明,纳米碳管的加入能有效地改善传感器的电化学性能,利用二茂铁和单壁纳米碳管共同修饰电极所制得的传感器的性能要好于仅用单壁纳米碳管修饰电极制得的传感器.在酶的固定化方法中,戊二醛交联法要略好于明胶包埋法;而利用铂电极制备出的生物传感器对葡萄糖的响应电流要明显高于利用金电极和玻碳电极制备出的生物传感器.这些结论对于开发纳米碳管在生物传感领域及生命科学相关领域的应用有参考价值.     

Selective electrochemical detection of dopamine based on molecularly imprinted poly(5-amino 8-hydroxy quinoline) immobilized reduced graphene oxide

The dopamine-imprinted conducting polymer film of 5-amino 8-hydroxy quinoline (AHQ) was electrodeposited on reduced graphene oxide (rGO)-modified glassy carbon (GC) electrode and was applied as a molecular recognition element for the selective determination of dopamine. The molecularly imprinted polymer (MIP)-modified electrode showed an excellent affinity towards dopamine due to the presence of imprinted site through hydrogen bonding interaction between dopamine and poly (AHQ) membrane. The molecular recognition ability of MIP-modified electrode was analyzed by cyclic voltammetric and differential pulse voltammetric techniques. The most stable geometry of the template–monomer complex in the pre-polymerization mixture was calculated by computational approaches. The rGO modification augmented both surface area and electron transfer kinetics of the bare electrode. The GC/rGO/MIP electrode possessed 2.83 fold current enhancements when compared to GC/MIP electrode, indicating the improvement in sensitivity due to rGO modification. The limit of detection and sensitivity of GC/rGO/MIP electrode was observed to be 32.7 nM and 13.3 AM^?1 cm^?2, respectively. The imprinting methodology provided an exceptional selectivity towards the detection of dopamine even in the presence of high concentration of possible physiological interferents. Moreover, the fabricated electrode was successfully employed for the detection of dopamine in human blood plasma samples proving the effectiveness of the sensor for the sensitive detection of dopamine from real samples.     

A cholesterol biosensor based on gold nanoparticles decorated functionalized graphene nanoplatelets

The fabrication of a cholesterol biosensor using gold nanoparticles decorated graphene nanoplatelets has been reported. Thermally exfoliated graphene nanoplatelets act as a suitable support for the deposition of Au nanoparticles. Cholesterol biosensor electrodes have been constructed with nafion solubilized functionalized graphene nanoplatelets (f-G) as well as Au nanoparticles decorated f-G, immobilized over glassy carbon electrode. f-G and Au/f-G thin film deposited glassy carbon electrodes were further functionalized with cholesterol oxidase by physical adsorption. Au nanoparticles dispersed over f-G demonstrate the ability to substantially raise the response current. The fabricated electrodes have been tested for their electrochemical performance at a potential of 0.2 V. The fabricated Au/f-G based cholesterol biosensor exhibits sensitivity of 314 nA/μM cm² for the detection of cholesterol with a linear response up to 135 μM. Furthermore, it has been observed that the biosensor exhibits a good anti-interference ability and favorable stability over a month's period.     

Electrochemical oxidation of oxalic acid at highly boron-doped diamond electrodes

Electrochemical oxidation of oxalic acid has been investigated at bare, highly boron-doped diamond electrodes. Cyclic voltammetry and flow injection analysis with amperometric detection were used to study the electrochemical reaction. Hydrogen-terminated diamonds exhibited well-defined peaks of oxalic acid oxidation in a wide pH range. A good linear response was observed for a concentration range from 50 nM to 10 microM, with an estimated detection limit of approximately 0.5 nM (S/N = 3). In contrast, oxygen-terminated diamonds showed no response for oxalic acid oxidation inside the potential window, indicating that surface termination contributed highly to the control of the oxidation reaction. An investigation with glassy carbon electrodes was conducted to confirm the surface termination effect on oxalic acid oxidation. Although a hydrogen-terminated glassy carbon electrode showed an enhancement of signal-to-background ratio in comparison with untreated glassy carbon, less stability of the current responses was observed than that at hydrogen-terminated diamond.     

Electrochemical detection of thiols with a coenzyme pyrroloquinoline quinone modified electrode

A modified electrode sensor for the detection of thiols is described. The sensor was constructed by incorporation of the coenzyme pyrroloquinoline quinone (PQQ) into a polypyrrole (PPy) film on a glassy carbon electrode substrate by the electropolymerization of pyrrole in the presence of PQQ. The electrochemical properties of entrapped PQQ in the PPy film were influenced by the applied potential during electropolymerization and by film thickness, both of which were optimized to yield a stable and reproducible response for entrapped PQQ. The PQQ/ PPy sensor was utilized for the amperometric detection of cysteine, homocysteine, penicillamine, N-acetylcysteine, and glutathione. The response for each thiol in pH 8.42 borate buffer was found to be linear with detection limits (S/N = 3) ranging from 13.2 microM for glutathione to 63.7 nM for cysteine with sensitivities of 0.023 nA/microM and 4.71 nA/microM, respectively. The response and detection limits were found to be sensitive to the nature of the thiol and the solution pH. Furthermore, in the presence of dopamine, ascorbic acid, or uric acid, the pH-dependent redox potential of the PQQ catalyst allows tuning of the detection potential to enhance the selectivity for thiols over these potential electroactive interferences.     

Atrazine sensor based on molecularly imprinted polymer-modified gold electrode

Molecularly imprinted polymers (MIP) have been elucidated to work as artificial receptors. In our present study, a MIP was applied as a molecular recognition element to a chemical sensor. We have constructed an atrazine sensor based on a MIP layer selective for atrazine and its electrochemical reduction on gold electrode. The atrazine sensor was fabricated by directly polymerizing the atrazine-imprinted polymer composed from methacrylic acid and ethylene glycol dimethacrylate onto the surface of a gold electrode. By introducing LiCl into the MIP, atrazine was reduced below -800 mV vs Ag/AgCl reference electrode, at pH 3. The cathodic current of atrazine depended on the concentration of atrazine at the range of 1-10 microM. The sensor exhibited a selective response to atrazine. A nonimprinted polymer-modified electrode did not show selective response to atrazine, thus implying that the imprinted polymer acts as recognition element of atrazine sensor.     

Fabrication and electrochemical behavior of single-walled carbon nanotube/graphite-based electrode

An electrochemical method for determining the dihydroxybenzene derivatives on glassy carbon (GC) has been developed. In this method, the performance of a single-walled carbon nanotube (SWCNT)/graphite-based electrode, prepared by mixing SWCNTs and graphite powder, was described. The resulting electrode shows an excellent behavior for redox of 3,4-dihydroxybenzoic acid (DBA). SWCNT/graphite-based electrode presents a significant decrease in the overvoltage for DBA oxidation as well as a dramatic improvement in the reversibility of DBA redox behavior in comparison with graphite-based and glassy carbon (GC) electrodes. In addition, scanning electron microscopy (SEM) and atomic force microscopy (AFM) procedures performed for used SWCNTs.     

Selective determination of sucrose based on electropolymerized molecularly imprinted polymer modified multiwall carbon nanotubes/glassy carbon electrode

A novel and selective electrochemical sensor was successfully developed for the determination of sucrose by integrating electropolymerization of molecularly imprinted polymer with multiwall carbon nanotubes. The sensor was prepared by electropolymerizing of o-phenylenediamine in the presence of template, sucrose, on a multiwall carbon nanotube-modified glassy carbon electrode. The sensor preparation conditions including sucrose concentration, the number of CV cycles in the electropolymerization step, pH of incubation solution, extraction time of template from the imprinted film and the incubation time were optimized using response surface methodology (RSM). A mixture of acetonitrile/acetic acid was used to remove the template. Hexacyanoferrate(II) was used as a probe to characterize the sensor using electrochemical impedance spectroscopy, cyclic voltammetry and differential pulse voltammetry. Capturing of sucrose by the modified electrode causes decreasing the response of the electrode to hexacyanoferrate(II). Calibration curve was obtained in the sucrose concentration range of 0.01–10.0 mmol L^? 1 with a limit of detection 3 μmol L^? 1. This sensor provides an efficient way for eliminating interferences from compounds with similar structures to sucrose. The sensor was successfully used to determine sucrose in sugar beet juices with satisfactory results.     

硼掺杂金刚石薄膜电极电化学特性的研究

本文用未经任何表面处理的硼掺杂金刚石薄膜为电极材料，采用循环伏安法和计时电流法检测含Ｋ３Ｆｅ（ＣＮ）６的ＫＣｌ和ＨＣｌ－ＫＣｌ溶液的响应电流，对电极的基本特性，如响应时间，稳定性等进行了研究；同坟也对溶液ｐＨ值变化与因而造成的响应电流变化进行了研究。从与玻碳电极比较的角度出发，分别在含汞的酸性ＫＣｌ－ＨＮＯ３和中性ＫＣｌ体系中，在一定电位下预富集铅，而后用阳极扫描法检测Ｐｂ－Ｈｇ的溶出峰电流，对金     

Fabrication and electrocatalysis of self-assembly directed gold nanoparticles anchored carbon nanotubes modified electrode

A self-assembly directed approach was adopted to modify glassy carbon electrode (GC) with gold nanoparticles incorporation and the electrocatalytic performance of self-assembly modified electrode, GC/SA-Au-ME was critically evaluated for the oxidation of ascorbic acid (AA). The modification involves the dispersion of multi-wall carbon nanotube (MWNT) and an inclusion complex, beta-cyclodextrin-4-aminothiophenol on the surface of GC electrode in the presence of cetyltrimethylammonium bromide (CTAB). Gold nanoparticles were deposited into the self-assembled sites to fabricate the modified electrode, GC/SA-Au-ME. Another electrode (GC-Au-ME) was fabricated under similar conditions in the absence of CTAB. The electrocatalytic activity of the modified electrodes (GC/SA-Au-ME and GC-Au-ME) towards the oxidation of AA was critically compared. Cyclic voltammetry, chronoamperometry, and double potential chronoamperometry were used to evaluate the characteristics of the modified electrodes. The self-assembled electrode (GC/SA-Au-ME) shows excellent electrocatalytic activity over the other electrode, GC-Au-ME. Augmented current response, faster electron transfer kinetics (with a rate constant for electron transfer process as 3.25 x 10(4) cm3 mol(-1) s(-1)), linear range of response for the analyte (1-50 mM with an extended detection limit to 1 microM), better sensitivity, and selectivity were witnessed for the self-assembly directed modified electrode.     

A selective and sensitive electrochemical determination of catechol based on reduced graphene oxide decorated β-cyclodextrin nanosheet modified glassy carbon electrode

In the present work, we have demonstrated the fabrication of catechol (CC) biosensor based on reduced graphene oxide (rGO) decorated β-cyclodextrin (β-CD) nanosheet immobilized using nafion (Nf) on modified GCE (glassy carbon electrode). The rGO/β-CD nanocomposite is synthesized through sonochemical approach and characterized by spectral (UV–visible, FT-IR, and Raman), analytical techniques (XRD, SEM, SAED, mapping analysis, HR-TEM and EDX) and electrochemical studies. The rGO/β-CD/Nf modified GCE exhibit a prominent electrocatalytic activity towards selective and sensitive determination of CC than other modified electrodes. Besides, the electrochemical sensor was revealed an excellent current response for the determination of CC with wide linear ranges (0.1–0.7 µM), high sensitivity (19.1 µA µM^-1cm²) and very low detection limit (LOD) 0.0012 µM. The excellent reproducibility, selectivity, stability, and sensitivity results are achieved for the determination of CC.